Fisher 59048 Parts List
3
fisher manufacturing company
Swing Spout
Stainless Steel Chinese Range Faucet
Product Installation Guide
Apply O-Ring
Lube
4
Since 1936, Fisher Manufacturing Company has manufactured heavy-duty, high quality plumbing products and
hardware specialties for the food service industry. For three
generations, the Fisher family has adhered to a strict dedication of overall value. When you install Fisher products…
you install the best. Our hardware is manufactured with
the standardization of internal mechanisms. Every piece of
equipment we make is rigorously tested in both our modern
in-house testing center and in actual fi eld situations under
extreme conditions. Every detail is thoroughly checked.
Before we make our products available to you, they pass
each and every test. You get proven performance. Guaranteed.
Limited One Year Warranty
Fisher Manufacturing Company warrants its products and
parts thereof (except as noted below) against defects in materials or workmanship for a period of one year after the
date of original purchase. During this period Fisher Manufacturing Company will replace a defective product or part
without charge to you, provided that the entire product is
delivered to Fisher Manufacturing Company. All transportation and insurance charges for shipping the product to
and from Fisher Manufacturing Company must be borne by
you. Charges for transportation and insurance may, at the
option of Fisher Manufacturing Company, be refunded depending upon our investigation of the warranty claim. This
warranty does not cover external fi nish (except at date of
original purchase) or labor costs not specifi cally authorized
by Fisher Manufacturing Company.
A full and complete copy of our One Year limited warranty
is available upon request.
Lever Handles
58947 - Chinese Range Faucet with 6” Swing Spout
58955 - Chinese Range Faucet with 8” Swing Spout
58963 - Chinese Range Faucet with 10” Swing Spout
58971 - Chinese Range Faucet with 12” Swing Spout
58998 - Chinese Range Faucet with 14” Swing Spout
59013 - Chinese Range Faucet with 16” Swing Spout
Wrist Handles
59021 - Chinese Range Faucet with 6” Swing Spout
59048 - Chinese Range Faucet with 8” Swing Spout
59056 - Chinese Range Faucet with 10” Swing Spout
59064 - Chinese Range Faucet with 12” Swing Spout
59072 - Chinese Range Faucet with 14” Swing Spout
59080 - Chinese Range Faucet with 16” Swing Spout
PART NO. 43656
MANFACTURING COMPANY
PO BOX 60, TULARE, CA 93275
(800)421-6162, FAX: (800)832-8238
www.fisher-mfg.com
REV. A
WARNING:
Proposition 65 requires that we provide you with the
following notice: “This product Contains A Chemical
Known To The State Of California To Cause Birth Defects
Or Other Reproductive Harm.”
KEEP THIS MANUAL FOR FUTURE REFERENCE
ANSI/A112.18.1M, ANSI/NSF 61.9
FISHER MANUFACTURING COMPANY, TOLL FREE: 800-421-6162, FAX:800-832-8238
www.noleadfaucet.com
PST
Installation Instructions for Chinese Range Faucets
BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION
REGARDING BACKFLOW PREVENTION
Installation Notes:
• Be sure to shut off water supply before beginning.
• Use pipe thread sealant such as PST on all threaded joints.
• Check the packaging for missing items BEFORE beginning installation. If items are
missing, contact your supplier.
Tools Required for Installation
• Medium Sized Crescent Wrench
• Pipe Thread Sealant
Installation Instructions
1. Mount control valve body to the backsplash by inserting the
nipple through the backsplash and attaching slip joint. Tighten slip
joint and attach elbows and supply lines as required. Be sure to
use pipe thread sealant on all threads.
2. If installing a double joint spout, apply lube to the o-rings on the
spout. Mount the double joint spout and tighten the nut onto the
faucet spout outlet.
1
1/2” NPT Supply Lines
(Optional)
Ø 7/8” Hole
1/2” Elbows
(Optional)
2
3. Apply lube to the o-rings on the swing spout. Make sure the white
snap ring is in place before mounting the swing spout. Mount the
swing spout and tighten the swing spout nut onto the faucet spout
outlet.
4. Turn on water supply and check for leaks.
Double Joint Spout
Apply O-Ring
Lube
Loading...