Fisher 1899 Parts Manual
2000-5003
SEAT WASHER
HOT SIDE
1770-0007 DECK SHUT
OFF VALVE LEFT HAND
SWIVEL STEM
Replacement Parts for Widespread Deck
Faucets
10022 (36”)
SUPPLY LINE
1/2” F X 1/2” F
3800 SINGLE
DECK BASE
SWIVEL
2000-7500
2000-8000
RED BUTTON
2000-8001
BLUE BUTTON
LEVER HANDLE
2000-3002
BIBB CAP
DUCK GASKET
WASHER
3000-0011
RH SWIVEL STEM
1000-7502
1770-0006 DECK SHUT
OFF VALVE LEFT HAND
SCREW
AND
73657
73741
SCREW
73521
LUBE
COLD SIDE
SWIVEL STEM
10006 (36”)
SUPPLY LINE
1/2” M X 1/2” F
2000-0002
HANDLE LEVER KIT
3000-0000
RH SWIVEL STEM
REPAIR KIT
OR
3000-0001
LH SWIVEL STEM
REPAIR KIT
55867
2.2 GPM
AERATOR
73557
SUPPLY LINE
1792
ANGLE STOP
WITH KEY
1790-1
ANGLE STOP
W/ CROSS
HANDLE
GOOSENECK
73684 SPOUT
SNAP RING
1600-5000
O-RINGS
SWIVEL SPOUT
RETRO-FIT KIT
73794
SLIP JOINT KIT
3968
6” SWIVEL
SPOUT
3965
12” SWIVEL
GOOSENECK
SPOUT
NUT
20020
SPOUT
73531
LUBE
19119
fisher manufacturing company
FAHB-BR-WSLL
Product Installation Guide
Since 1936, Fisher Manufacturing Company has manufactured
heavy-duty, high quality plumbing products and hardware
specialties for the food service industry. For three generations,
the Fisher family has adhered to a strict dedication of and
overall value. When you install Fisher products… you
install the best. Our hardware is manufactured with the
standardization of internal mechanisms. All chrome plating
is triple plated copper, nickel and chrome for durability. Every
piece of equipment we make is rigorously tested in both our
modern in-house testing center and in actual fi eld situations
under extreme conditions. Every detail is thoroughly checked.
Before we make our products available to you, they pass each
and every test. You get proven performance. Guaranteed.
Limited One Year Warranty
Fisher Manufacturing Company warrants its products
and parts thereof (except as noted below) against defects
in materials or workmanship for a period of one year after
the date of original purchase. During this period Fisher
Manufacturing Company will replace a defective product
or part without charge to you, provided that the entire
product is delivered to Fisher Manufacturing Company. All
transportation and insurance charges for shipping the product
to and from Fisher Manufacturing Company must be borne
by you. Charges for transportation and insurance may, at
the option of Fisher Manufacturing Company, be refunded
depending upon our investigation of the warranty claim. This
warranty does not cover external fi nish (except at date of
original purchase) or labor costs not specifi cally authorized by
Fisher Manufacturing Company.
A full and complete copy of our One Year limited warranty is
available upon request.
Warning:This product can expose you to chemicals
including Lead, Nickel (Metallic), Di(2-ethylhexyl)
phathalate (DEHP) which are known to the State of
California to cause cancer, and Lead. Di(2-ethylhexyl)
phathalate (DEHP) which are known to the State of
Califorina to cause birth defects or reproductive harm.
For more information go to:
www.P65Warnings.ca.gov.
KEEP THIS MANUAL FOR FUTURE REFERENCE
#1899 - Widespread Deck Faucet with 12”Swivel
Gooseneck Spout
#1910 - Widespread Deck Faucet with 6”Swivel
Gooseneck Spout
ANSI/A112.18.1M, ANSI/NSF 61.9
PART NO. 42307
MANFACTURING COMPANY
PO BOX 60, TULARE, CA 93275
(800)421-6162, FAX: (800)832-8238
www.fisher-mfg.com
REV. A
fisher manufacturing company - toll free: 800-421-6162 fax: 800-832-8238
www.fi sher-mfg.com
Installation Instructions for Widespread Deck Faucets
BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION
REGARDING BACKFLOW PREVENTION
Installation Instructions Continued
Installation Notes:
• Be sure to shut off water supply before beginning.
• Use pipe thread sealant such as PST on all threaded joints.
• Check the packaging for missing items BEFORE beginning installation. If items are missing,
contact your supplier.
Tools Required for Installation
• Pipe Wrench
• Medium Sized Crescent Wrench
PST
• Pipe Thread Sealant
Package Contents
The box should contain the following:
Swivel Single
Deck base
Qty: 1
Left and Right
Deck Shut Off Valves
Qty: 1of each
Swivel Gooseneck Spout
Length Determined By Model
Spout Includes One 20020 Snap Ring
Qty: 1
And Two 1600-5000 O-Rings
Supply Line Adapter
Qty: 1
Supply Line
Qty: 2
73521
Lube
Installation Instructions
1. Cut rough-in holes.
2. Mount spout base, then tighten with washer and locknut.
3. Screw on supply line adapter, use pipe sealant on the connection, to the nipple.
4. Add a small amount of o-ring lube to the o-ring on the supply lines and tighten supply lines in
the supply line adapter.
5. Mount both control valves, and tighten with locknut. Connect supply lines to control valves and
tighten. Make sure supply lines are not kinked or crimped after install.
6. Apply o-ring lube to the o-rings on the swivel gooseneck spout. Make sure the white snap ring
is in place before mounting the spout. Mount the spout and tighten the gooseneck spout nut
onto the faucet spout outlet.
7. Turn on water supply and check for leaks.
Step 2
Step 4
Step 6
Spout Base
Washer
Locknut
Apply O-ring
Lube Here
Supply Line
Step 3
Step 5
Step 7
Spout Base
Apply Thread
Sealant Here
Supply Line
Left Contol
Valve
Hot Cold
Adapter
Right Contol
Valve
Step 1
ROUGH-IN:
4”
8”
7/8”
Apply O-ring
Lube Here
1-1/4”
Loading...