Fisher 13641 PARTS LIST
Replacement Parts for Spray Valves
1000 - 3301
BONNET NUT
fisher manufacturing company
Pre-Rinse Spray Valve
Product Installation Guide
2949 - 9000
BLACK BUMPER
OR
2949 - 9002
2949 - 3001
2949 SPRAY
NOZZLE
NEW # 2949 - 8600
CUP WASHER BRS
BLUE BUMPER
1000 - 5003
SEAT WASHER
1000 - 7502
SCREW
SPRAY VALVE
1000 - 5005
O-RING
1000 - 5001
BONNET WASHER
2912 - 6000
SPRING
1000 - 0001
RETAINER DISK ASSY
2922 - 5000
HANDLE GASKET
1000 - 0003
LIFT PIN SA
2909 - 5000
GASKET
2909 - 3400
LIFT PIN GUIDE
2912 - 2501
SQUEEZE LEVER
2912 - 7501
SCREWS
11355
SPRAY VALVE
REPAIR KIT
Since 1936, Fisher Manufacturing Company has
manufactured heavy-duty, high quality plumbing
products and hardware specialties for the food service
industry. For three generations, the Fisher family has
adhered to a strict dedication of and overall value.
When you install Fisher products… you install the best.
Our hardware is manufactured with the standardization
of internal mechanisms. All chrome plating is triple
plated copper, nickel and chrome for durability. Every
piece of equipment we make is rigorously tested
in both our modern in-house testing center and in
actual eld situations under extreme conditions.
Every detail is thoroughly checked. Before we make
our products available to you, they pass each and
every test. You get proven performance. Guaranteed.
Limited One Year Warranty
Fisher Manufacturing Company warrants its products
and parts thereof (except as noted below) against
defects in materials or workmanship for a period of
one year a er the date of original purchase. During
this period Fisher Manufacturing Company will
replace a defective product or part without charge to
you, provided that the entire product is delivered to
Fisher Manufacturing Company. All transportation and
insurance charges for shipping the product to and from
Fisher Manufacturing Company must be borne by you.
Charges for transportation and insurance may, at the
option of Fisher Manufacturing Company, be refunded
depending upon our investigation of the warranty claim.
is warranty does not cover external nish (except at
date of original purchase) or labor costs not speci cally
authorized by Fisher Manufacturing Company.
A full and complete copy of our One Year limited
warranty is available upon request.
#2949 - Ultra Spray Valve, 1.15 GPM @ 60 PSI
PART NO. 00000
MANFACTURING COMPANY
PO BOX 60, TULARE, CA 93275
(800)421-6162, FAX: (800)832-8238
www.fisher-mfg.com
REV. A
WARNING:
Proposition 65 requires that we provide you with the
following notice: “ is product Contains A Chemical
Known To e State Of California To Cause Birth
Defects Or Other Reproductive Harm.”
KEEP THIS MANUAL FOR FUTURE REFERENCE
ANSI/A112.18.1M, ANSI/NSF 61.9
fisher manufacturing company - toll free: 800-421-6162 fax: 800-832-8238
www.fi sher-mfg.com
Installing Your New Fisher Ultra Pre-Rise Spray
Installation Notes:
Tools Required for Installation
• Medium Sized Crescent Wrench
Package Contents
The box should contain the following:
Installation Instructions Continued
Step 2
Insulated
Handle
Remove
Handle Gasket
from Insulated
Handle.
2949
Ultra Pre-Rinse
Spray Valve
Qty: 1
Installation Instructions
1. Turn off water supply.
2. Remove existing spay valve, from the insulated handle. Place an adjustablewrench or a 1” wrench on Insulated handle while turning the existing spray
valve with your hand clockwise. See Step 1
3. After removal of the existing spray valve, remove old handle gasket and clean
any debis from the insulated handle. See Step 2
4. Open the 2949 package, insert the new handle gasket into the insulated
handle. See Step 3
5. Hand tighten the 2949 spray valve on the insulated handle. Using an adjustablle wrench or a 1” wrench on the insulated handle, while turning the 2949
spray valve counter clockwise, until snug. See Step 4
6. Turn on water supply and check for leaks.
Step 1
2922-5000
Handle Gasket
Qty: 1
Insulated Handle
( black or gray)
Existing Spray
Valve
Step 3
Insulated
Handle
Insert new
Handle Gasket
into Insulated
Handle.
Step 4
Insulated
Handle
Attach 2949 onto
the Insulated
Handle.
Loading...