Fisher 13226 Parts List
2000-5003
SEAT WASHER
3200-2306
CONCENTRIC
FLANGES
Replacement Parts for Backsplash Faucets
SWIVEL
13153
CONTROL VALVE
BLUE BUTTON
LEVER HANDLE
DUCK GASKET
LH SWIVEL STEM
RH SWIVEL STEM
22594
1/2” CONCENTRICS
2000-7500
SCREW
2000-8000
RED BUTTON
AND
2000-8001
2000-3002
BIBB CAP
73657
73741
WASHER
3000-0010
OR
3000-0011
1000-7502
SCREW
73521
LUBE
10022 (36”)
SUPPLY LINE
1/2” F X 1/2” F
10006 (36”)
SUPPLY LINE
1/2” M X 1/2” F
2000-0002
HANDLE LEVER KIT
3000-0000
RH SWIVEL STEM
REPAIR KIT
3000-0001
LH SWIVEL STEM
REPAIR KIT
2200-5000
CONCENTRIC
GASKETS
55867
2.2 GPM
AERATOR
OR
1792
ANGLE STOP
WITH KEY
1790-1
ANGLE STOP
W/ CROSS
HANDLES
73794
SLIP JOINT KIT
6” SWIVEL
GOOSENECK
12” SWIVEL
GOOSENECK
SPOUT NUT
SNAP RING
1600-5000
O-RINGS
SWIVEL SPOUT
RETRO-FIT KIT
3968
SPOUT
3965
SPOUT
73684
20020
SPOUT
73521
LUBE
737521
2400-2103
ELBOWS
fisher manufacturing company
FAHB-BR-8BSLL
Product Installation Guide
Since 1936, Fisher Manufacturing Company has manufactured
heavy-duty, high quality plumbing products and hardware
specialties for the food service industry. For three generations,
the Fisher family has adhered to a strict dedication of and
overall value. When you install Fisher products… you
install the best. Our hardware is manufactured with the
standardization of internal mechanisms. All chrome plating
is triple plated copper, nickel and chrome for durability. Every
piece of equipment we make is rigorously tested in both our
modern in-house testing center and in actual fi eld situations
under extreme conditions. Every detail is thoroughly checked.
Before we make our products available to you, they pass each
and every test. You get proven performance. Guaranteed.
Limited One Year Warranty
Fisher Manufacturing Company warrants its products
and parts thereof (except as noted below) against defects
in materials or workmanship for a period of one year after
the date of original purchase. During this period Fisher
Manufacturing Company will replace a defective product
or part without charge to you, provided that the entire
product is delivered to Fisher Manufacturing Company. All
transportation and insurance charges for shipping the product
to and from Fisher Manufacturing Company must be borne
by you. Charges for transportation and insurance may, at
the option of Fisher Manufacturing Company, be refunded
depending upon our investigation of the warranty claim. This
warranty does not cover external fi nish (except at date of
original purchase) or labor costs not specifi cally authorized by
Fisher Manufacturing Company.
A full and complete copy of our One Year limited warranty is
available upon request.
Warning:This product can expose you to chemicals
including Lead, Nickel (Metallic), Di(2-ethylhexyl)
phathalate (DEHP) which are known to the State of
California to cause cancer, and Lead. Di(2-ethylhexyl)
phathalate (DEHP) which are known to the State of
Califorina to cause birth defects or reproductive harm.
For more information go to:
www.P65Warnings.ca.gov.
KEEP THIS MANUAL FOR FUTURE REFERENCE
#13285- FAUCET 8BSLH 12SGN
#13226- FAUCET 8BSLH 06SGN
PART NO. 42218
MANFACTURING COMPANY
PO BOX 60, TULARE, CA 93275
(800)421-6162, FAX: (800)832-8238
www.fisher-mfg.com
REV. A
ANSI/A112.18.1M, ANSI/NSF 61.9
fisher manufacturing company - toll free: 800-421-6162 fax: 800-832-8238
www.fi sher-mfg.com
Installation Instructions for Backsplash Faucets
BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION
REGARDING BACKFLOW PREVENTION
Installation Instructions Continued
Installation Notes:
• Be sure to shut off water supply before beginning.
• Use pipe thread sealant such as PST on all threaded joints.
• Check the packaging for missing items BEFORE beginning installation. If items are missing, contact your supplier.
Tools Required for Installation
• Medium Sized Crescent Wrench
• Pipe Thread Sealant
PST
Package Contents
The box should contain the following:
Control Valve
Qty: 1
Swivel Gooseneck Spout
Length Determined By Model
Swivel Spout Includes One 20020 Snap
Ring And Two 1600-5000 O-Rings
Qty: 1
3200-2306
Concentric Flanges
Qty: 2
22594
1/2” Concentrics
Qty: 2
2200-5000
Concentric Gaskets
Qty: 2
73794
Slip Joint Kit
Qty: 2
73521
Lube
Installation Instructions
1. After unpacking items and checking for missing components, insert the gasket into the groove
on the concentric. Making sure gasket is in place, tighten the concentric and fl ange onto the
control valve body.
2. Mount control valve body to the backsplash by inserting the concentrics through the backsplash
and attaching slip joints. Attach elbows and supply lines (not included) as required. Be sure to
use pipe thread sealant on all threads.
3. Apply o-ring lube to the o-rings on the swing spout Make sure the white snap ring is in place
before mounting the swing spout. Mount the swing spout and tighten the swing spout nut onto
the control valve.
4. Turn on water supply and check for leaks.
Step 2
Step 3
Ø7/8”
Elbows
(not included)
Slip Joints
7 3/4” - 8 1/4”
[196.9 - 209.6mm]
Apply O-Ring
Lube Here
Supply lines
(not included)
Step 1
Step 4
Gasket
Concentric
Flange
Loading...