First Alert P1000 User Manual

USER’S MANUAL

3 Fit Your Smoke Alarm

Fixing slots

SMOKE AND FIRE* ALARM

IMPORTANT! PLEASE READ CAREFULLY AND SAVE.

This user’s manual contains important information about your Smoke
Alarm’s operation. If you are installing this Smoke Alarm for use by
others, you must leave this manual—or a copy of it—with the end user.
Para el manual del usuario en español, por favor visite www.firstalert.com.

Printed in China
M08-0410-010 04/14

© 2014 BRK Brands, Inc. All rights reserved.
Distributed by BRK Brands, Inc.
3901 Liberty Street Road, Aurora, IL 60504-8122
Consumer Affairs: [phone] • www.firstalert.com

*All First Alert® Smoke Alarms conform to regulatory requirements,
including UL217 and are designed to detect particles of combustion.

Smoke particles of varying number and size are produced in all fires.

Ionization technology is generally more sensitive than photoelectric
technology at detecting small particles, which tend to be produced

in greater amounts by flaming fires, which consume combustible
materials rapidly and spread quickly. Sources of these fires may include
paper burning in a wastebasket, or a grease fire in the kitchen.

Photoelectric technology is generally more sensitive than ionization

technology at detecting large particles, which tend to be produced

in greater amounts by smoldering fires, which may smolder for
hours before bursting into flame. Sources of these fires may include
cigarettes burning in couches or bedding.

For maximum protection, use both types of Smoke Alarms on
each level and in every bedroom of your home.

CONFORMS TO

UL STD 217

Model P1000

FIRE SAFETY TIPS

Follow safety rules and prevent hazardous situations: 1) Use smoking
materials properly. Never smoke in bed. 2) Keep matches or lighters
away from children; 3) Store flammable materials in proper containers;

4) Keep electrical appliances in good condition and don’t overload elec­trical circuits; 5) Keep stoves, barbecue grills, fireplaces and chimneys
grease- and debris-free; 6) Never leave anything cooking on the stove
unattended; 7) Keep portable heaters and open flames, like candles,
away from flammable materials; 8) Don’t let rubbish accumulate.

Keep alarms clean, and test them weekly. Replace alarms immediately
if they are not working properly. Smoke Alarms that do not work cannot
alert you to a fire. Keep at least one working fire extinguisher on every
floor, and an additional one in the kitchen. Have fire escape ladders or
other reliable means of escape from an upper floor in case stairs are
blocked.

BEFORE YOU INSTALL THIS SMOKE ALARM

Important! Read “Recommended Locations for Smoke Alarms”
and “Locations to Avoid for Smoke Alarms” before beginning. This
unit monitors the air, and when smoke reaches its sensing chamber,
it alarms. It can give you more time to escape before fire spreads.
This unit can ONLY give an early warning of developing fires if it is
installed, maintained and located where smoke can reach it, and where
all residents can hear it, as described in this manual. This unit will not
sense gas, heat, or flame. It cannot prevent or extinguish fires.

Understand The Different Type of Smoke Alarms

Battery powered or electrical? Different Smoke Alarms provide
different types of protection. See “About Smoke Alarms” for details.

Know Where To Install Your Smoke Alarms

Fire Safety Professionals recommend at least one Smoke Alarm on
every level of your home, in every bedroom, and in every bedroom
hallway or separate sleeping area. See “Recommended Locations
For Smoke Alarms” and “Locations To Avoid For Smoke Alarms” for
details.

Know What Smoke Alarms Can and Can’t Do

A Smoke Alarm can help alert you to fire, giving you precious time
to escape. It can only sound an alarm once smoke reaches the sen­sor. See “Limitations of Smoke Alarms” for details.

Check Your Local Building Codes

This Smoke Alarm is designed to be used in a typical single-family
home. It alone will not meet requirements for boarding houses,
apartment buildings, hotels or motels. See “Special Compliance
Considerations” for details.

HOW TO INSTALL YOUR SMOKE ALARM

Make sure you have read and understood this manual before installing
your smoke alarm.

1. Preparation
Attach the mounting ring to the wall or ceiling as follows:

Use the two fixing slots on the mounting ring as a guide when marking
the position of the drill holes. With an appropriately sized drill, drill the
holes and insert the plastic fixing anchors supplied (if needed).
See diagram.

3. If battery is installed, activate battery by removing clear plastic
battery spacer from underneath battery ensuring battery remains in
place.
If battery is not installed, install battery so the terminals on the
battery match the terminals on the smoke alarm. Match “+” to “+”.
Push the battery until it snaps in securely and cannot be shaken loose.

NOTE: Do not remove label from back of alarm.

4. Fit Your Smoke Alarm

Position the smoke alarm over the mounting
ring and turn clockwise. You should feel the
alarm click into place. The alarm will only
attach to the mounting ring with the battery
in place.
Note: This smoke alarm will not mount if a
battery is not installed.

5. Test Your Smoke Alarm

See “Weekly Testing.”

2. Install Mounting Ring

Fit the mounting ring to the ceiling or
wall using the screws provided. Ensuring
that the screw heads are flush.

REGULAR MAINTENANCE

This unit has been designed to be as maintenance free as possible, but
there are a few simple things you must do to keep it working properly.

Use only the replacement batteries listed below. The unit may not
operate properly with other batteries. Never use rechargeable
batteries since they may not provide a constant charge.

• Test it at least once a week.

• Clean the Smoke Alarm at least once a month; gently vacuum off
any dust using your household vacuums soft brush attachment, and
test the Smoke Alarm after cleaning. Never use water, cleaners or
solvents since they may damage the unit.

• If the Smoke Alarm becomes contaminated by excessive dirt, dust
and/or grime, and cannot be cleaned to avoid unwanted alarms,
replace the unit immediately.

• Relocate the unit if it sounds frequent unwanted alarms. See
“Locations to Avoid For Smoke Alarms” for details.

• When the battery becomes weak, the Smoke Alarm unit will “chirp”
approximately once a minute (the low battery warning). This low bat­tery warning should last for up to 7 days, but you should replace the
battery immediately to continue your protection.

Choosing a replacement battery:

Your Smoke Alarm requires one 3V CR2 batteries. The following batteries
are acceptable as replacement: Duracell CR2, EVE CR2, and Panasonic
CR2. These batteries are available at many local retail stores.

Actual service life depends on the Smoke Alarm and the environment
in which it is installed. All the batteries specified above are acceptable
replacement batteries for this unit. Regardless of the manufacturer’s
suggested battery life, you MUST replace the battery immediately once
the unit starts “chirping” (the “low battery warning”).

• Always select the correct size and type of battery most suitable for
the intended use. Information provided with the appliance to assist
correct battery selection should be retained for reference.

• Remove used batteries promptly and replace all batteries of a set at
the same time.

• Clean the battery and appliance contacts prior to battery installation.

• Ensure that the batteries are installed correctly with regard to polari­ty (+ and -).

• Immediately seek medical attention if a cell or battery has been
swallowed. Also, contact your local poison control center.

IF THIS SMOKE ALARM SOUNDS

RESPONDING TO AN ALARM

During an alarm, you will hear a loud, repeating horn pattern:
3 beeps, pause, 3 beeps, pause. The LED will flash rapidly.

• Thisunitwillnotalert hearingimpairedresidents.
It is recommended that you install special units which use
devices like flashing strobe lights to alert hearing impaired
residents.

• Donotconnectthisunit toanyotheralarm orauxiliary

device. It is a single-station unit that cannot be linked to
other devices. Connecting anything else to this unit may
prevent it from working properly.

• Unitwillnotoperatewithout

battery power. The Smoke Alarm
cannot work until you install the
battery in the correct position
(Match “+” to “+”).

• ThisSmokeAlarmhasa battery

area which resists closing unless a
battery is installed.

• Donotinstallthisunitoveranelectricaljunctionbox.
Aircurrentsaroundjunctionboxescanpreventsmokefrom

reaching the sensing chamber and prevent the unit from alarm­ing. Only AC powered units are intended for installation over

junctionboxes.

• Donotstandtooclosetotheunitwhenthealarmis sounding.

It is loud to wake you in an emergency. Exposure to the horn at
close range may harm your hearing.

• Donotpaintovertheunit.Paintmayclogtheopeningsto the

sensing chamber and prevent the unit from operating properly.

BATTERY PLACEMENT

WEEKLY TESTING

• NEVERuseanopenflame ofanykindto testthisunit.You

might accidentally damage or set fire to the unit or to your
home. The built-in test switch accurately tests the unit’s
operation as required by ANSI/UL Standard 217.

• IftheAlarmeverfails totestproperly,replaceitimmediately.

Products under warranty may be returned to the manufacturer
for replacement. See “Limited Warranty” for details.

• DONOTstandcloseto thealarmwhenthe hornissounding.

Exposure at close range may be harmful to your hearing. When
testing, step away when horn starts sounding.

It is important to test this unit every week to make sure it is
working properly. Using the test/silence button is the recommended

way to test this Smoke Alarm. Press and
hold the test/silence button on the unit until
the alarm sounds (the unit may continue to
alarm for a few seconds after you release
the button). If it does not alarm, make sure
the unit is receiving power (LED will flash
approximately once a minute indicating it
has power); and test it again. If it still does
not alarm, replace it immediately. During
testing you will hear a loud, repeating horn
pattern: 3 beeps, pause, 3 beeps, pause.

• Iftheunitalarmsand youarenottestingtheunit,itiswarning

you of a potentially dangerous situation that requires your
immediate attention. NEVER ignore any alarm. Ignoring the

alarmmayresultininjury ordeath.

• NeverremovethebatteriesfromabatteryoperatedSmoke

Alarm to stop an unwanted alarm (caused by cooking smoke,
etc.). Removing batteries disables the alarm so it cannot sense
smoke, and removes your protection. Instead open a window
or fan the smoke away from the unit. The alarm will reset auto­matically.

• Iftheunitalarmsget everyoneoutofthe houseimmediately.

WHAT TO DO IN CASE OF FIRE

• Don’t panic; stay calm. Follow your family escape plan.

• Get out of the house as quickly as possible. Don’t stop to get
dressed or collect anything.

• Feel doors with the back of your hand before opening them.
If a door is cool, open it slowly. Don’t open a hot door. Keep doors
and windows closed, unless you must escape through them.

• Cover your nose and mouth with a cloth (preferably damp).
Take short, shallow breaths.

• Meet at your planned meeting place outside your home,
and do a head count to make sure everybody got out safely.

• Call the Fire Department as soon as possible from outside.
Give your address, then your name.

• Never go back inside a burning building for any reason.

• Contact your Fire Department for ideas on making your home safer.

Alarms have various limitations. See “Limitations of Smoke
Alarms” for details.

USING THE SILENCE FEATURE

The Silence Feature can temporarily quiet an unwanted alarm for up to
10 minutes. To use this feature, press the Test/Silence button. If the unit

will not silence and no heavy smoke is present, or if it stays
in silence mode continuously, it should be replaced immediately.

The LED will flash every 8 seconds while in silence.

The Silence Feature does not disable the unit—it makes it
temporarily less sensitive to smoke. For your safety, if smoke
around the unit is dense enough to suggest a potentially danger­ous situation, the unit will stay in alarm or may re-alarm quickly. If
you do not know the source of the smoke, do not assume it is an
unwanted alarm. Not responding to an alarm can result in property

loss,injury,ordeath.

IF YOU SUSPECT A PROBLEM

Smoke Alarms may not operate properly because of dead, missing or
weak batteries, a build-up of dirt, dust or grease on the Smoke Alarm
cover, or installation in an improper location. Clean the Smoke Alarm as
described in “Regular Maintenance,” and install a fresh battery, then test
the Smoke Alarm again. If it fails to test properly when you use the test
button, or if the problem persists, replace the Smoke Alarm immediately.

• Ifyouheara“chirp” aboutonceaminute, replacethebattery.

• Ifyouexperiencefrequentnon-emergencyalarms(likethose

caused by cooking smoke), try relocating the Smoke Alarm.

Continued...

1

2

IF YOU SUSPECT A PROBLEM, Continued

• Ifthealarmsoundswhen nosmokeisvisible, trycleaningor
relocating the Smoke Alarm. The cover may be dirty.

• Ifthealarmdoesnot soundduringtesting,try installinganew

battery, and make sure it is snapped in securely.

Do not try fixing the alarm yourself – this will void your warranty!

If the Smoke Alarm is still not operating properly, and it is still under
warranty, please see “How to Obtain Warranty Service” in the Limited
Warranty.

LIMITED WARRANTY

BRK Brands, Inc., (“BRK”) the maker of First Alert® brand products
warrants that for a period of ten years from the date of purchase, this
product will be free from defects in material and workmanship. BRK, at
its option, will repair or replace this product or any component of the
product found to be defective during the warranty period. Replacement
will be made with a new or remanufactured product or component. If
the product is no longer available, replacement may be made with a
similar product of equal or greater value. This is your exclusive warranty.

This warranty is valid for the original retail purchaser from the date of
initial retail purchase and is not transferable. Keep the original sales
receipt. Proof of purchase is required to obtain warranty performance.
BRK dealers, service centers, or retail stores selling BRK products do
not have the right to alter, modify or any way change the terms and
conditions of this warranty.

This warranty does not cover normal wear of parts or damage resulting
from any of the following: negligent use or misuse of the product, use on
improper voltage or current, use contrary to the operating instructions,
disassembly, repair or alteration by anyone other than BRK or an
authorized service center. Further, the warranty does not cover Acts of
God, such as fire, flood, hurricanes and tornadoes or any batteries that
are included with this unit.

BRK shall not be liable for any incidental or consequential damages
caused by the breach of any express or implied warranty. Except to
the extent prohibited by applicable law, any implied warranty of
merchantability or fitness for a particular purpose is limited in duration
to the duration of the above warranty. Some states, provinces or
jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages or limitations on how long an implied warranty
lasts, so the above limitations or exclusion may not apply to you. This
warranty gives you specific legal rights, and you may also have other
rights that var y from state to state or province to province.

How to Obtain Warranty Service
Service: If service is required, do not return the product to your retail-

er. In order to obtain warranty service, contact the Consumer Affairs
Division at 1-800-323-9005, 7:30 AM - 5:00 PM Central Standard Time,
Monday through Friday. To assist us in serving you, please have the
model number and date of purchase available when calling.
For Warranty Service return to:
BRK Brands, Inc., 25 Spur Drive, El Paso, TX 79906

Battery: BRK Brands, Inc. make no warranty, express or implied, written
or oral, including that of merchantability or fitness for any particular
purpose with respect to battery.

RECOMMENDED LOCATIONS FOR
SMOKE ALARMS

Installing Smoke Alarms in Single-Family Residences

The National Fire Protection Association (NFPA), recommends one
Smoke Alarm on every floor, in every sleeping area, and in every bed­room. In new construction, the Smoke Alarms must be AC powered and
interconnected. See “Agency Placement Recommendations” for details.
For additional coverage, it is recommended that you install a Smoke
Alarm in all rooms, halls, storage areas, finished attics, and basements,
where temperatures normally remain between 40˚ F (4.4˚ C) and 100˚ F
(37.8˚ C). Make sure no door or other obstruction could keep smoke from
reaching the Smoke Alarms.

More specifically, install Smoke Alarms:

•

On every level of your home, including finished attics and basements.

• Inside every bedroom, especially if people sleep with doors closed.

• In the hall near every sleeping area. If your home has multiple sleep­ing areas, install a unit in each. If a hall is over 40 feet (12 meters)
long, install an alarm at each end.

• At the top of the first-to-second floor stairway, and at bottom of
basement stairway.

Specific requirements for Smoke Alarm installation vary from state to
state and from region to region. Check with your local Fire Department
for current requirements in your area. It is recommended AC or AC/

DC units be interconnected for added protection.

LOCATIONS TO AVOID FOR SMOKE ALARMS, Continued

• In very damp, humid or steamy areas, or directly near bathrooms with
showers. Keep units at least 10 feet (3 meters) away from showers, sau­nas, dishwashers, etc.

• Where the temperatures are regularly below 40˚ F (4.4˚ C) or above 100˚ F
(37.8˚ C), including unheated buildings, outdoor rooms, porches, or unfin­ished attics or basements.

• In very dusty, dirty, or greasy areas. Do not install a Smoke Alarm directly
over the stove or range. Keep laundry room Smoke Alarms free of dust or
lint.

• Near fresh air vents, ceiling fans, or in very drafty areas. Drafts can
blow smoke away from the unit, preventing it from reaching the sensing
chamber.

• In insect infested areas. Insects can clog openings to the sensing
chamber and cause unwanted alarms.

• Less than 12 inches (305mm) away from fluorescent lights. Electrical
“noise” can interfere with the sensor.

• In “dead air” spaces. “Dead air” spaces may prevent smoke from
reaching the Smoke Alarm.

Avoiding Dead Air Spaces

“Dead air” spaces may prevent smoke from reaching the Smoke Alarm.
To avoid dead air spaces, follow the installation recommendations below.

On ceilings, install Smoke Alarms as close to the center of the ceiling as
possible. If this is not possible, install the Smoke Alarm at least 4 inches
(102 mm) from the wall or corner.

For wall mounting (if allowed by building codes), the top edge of Smoke
Alarms should be placed between 4 and 12 inches (102 and 305 mm) from
the wall/ceiling line, below typical “dead air” spaces.

On a peaked, gabled, or cathedral ceiling, install the first Smoke Alarm
within 3 feet (0.9 meters) of the peak of the ceiling, measured horizontally.
Additional Smoke Alarms may be required depending on the length, angle,
etc. of the ceiling’s slope. Refer to NFPA 72 for details on requirements for
sloped or peaked ceilings.

ABOUT SMOKE ALARMS

Battery (DC) operated Smoke Alarms: Provide protection even when
electricity fails, provided the batteries are fresh and correctly installed.
Units are easy to install, and do not require professional installation. However,
they do not provide interconnected functionality.

AC powered Smoke Alarms: Can be interconnected so if one unit senses
smoke, all units alarm. They do not operate if electricity fails.
AC with battery (DC) back-up: will operate if electricity fails, provided the
batteries are fresh and correctly installed. AC and AC/DC units must be
installed by a qualified electrician.

Wireless Interconnected Alarms: Offer the same interconnected
functionality as with hardwired alarms, without wires. Units are easy to install
and do not require professional installation. They provide protection even
when electricity fails, provided the batteries are fresh and correctly installed.

Smoke Alarms for Solar or Wind Energy users and battery backup
power systems: AC powered Smoke Alarms should only be operated with true

or pure sine wave inverters. Operating this Smoke Alarm with most
battery-powered UPS (uninterruptible power supply) products or square wave or
“quasi sine wave” inverters will damage the Alarm. If you are not sure about
your inverter or UPS type, please consult with the manufacturer to verify.

Smoke Alarms for the hearing impaired: Special purpose Smoke Alarms
should be installed for the hearing impaired. They include a visual alarm and
an audible alarm horn, and meet the requirements of the Americans With
Disabilities Act. These units can be interconnected so if one unit senses
smoke, all units alarm.

Smoke alarms are not to be used with detector guards unless the
combination has been evaluated and found suitable for that purpose.

All these Smoke Alarms are designed to provide early warning of fires
if located, installed and cared for as described in the user
smoke reaches the Alarm. If you are unsure which type of unit to install, refer
to NFPA (National Fire Protection Association) 72 (National Fire Alarm and
Signaling Code) and NFPA 101 (Life Safety Code). National Fire Protection
Association, One Batterymarch Park, Quincy, MA 02269-9101. Local building
codes may also require specific units in new construction or in different areas
of the home.

SPECIAL COMPLIANCE CONSIDERATIONS

This Smoke Alarm is suitable for use in apartments, condominiums, town­houses, hospitals, day care facilities, health care facilities, boarding houses,
group homes and dormitories provided a primary fire detection system
already exists to meet fire detection requirements in common areas like lob­bies, hallways, or porches. Using this Smoke Alarm in common areas may
not provide sufficient warning to all residents or meet local fire protection
ordinances/regulations.

This Smoke Alarm alone is not a suitable substitute for complete fire detection
systems in places housing many people—like apartment buildings,
condominiums, hotels, motels, dormitories, hospitals, health care facilities,
nursing homes, day care facilities, or group homes of any kind. It is not a suit­able substitute for complete fire detection systems in warehouses,
industrial facilities, commercial buildings, and special-purpose non-residential
buildings which require special fire detection and alarm systems. Depending
on the building codes in your area, this Smoke Alarm may be used to
provide additional protection in these facilities.

In new construction, most building codes require the use of AC or AC/DC
powered Smoke Alarms only. In existing construction, AC, AC/DC, or DC pow­ered Smoke Alarms can be used as specified by local building codes. Refer
to NFPA 72 (National Fire Alarm and Signaling Code) and NFPA 101 (Life Safety
Code), local building codes, or consult your Fire Department for detailed fire
protection requirements in buildings not defined as “households”.

HUD MAP Program

Certain HUD battery powered Smoke Alarm applications, especially those
that fall under HUD 223(f) MAP (Multi-family Accelerated Processing), may
require a 10 Year sealed tamper resistant battery. This alarm does not meet
that requirement. Substitute First Alert SA340B.

’s manual, and if

AGENCY PLACEMENT RECOMMENDATIONS

NFPA 72 Chapter 29

“For your information, the National Fire Alarm and Signaling Code,
NFPA 72, reads as follows:”

29.5.1* Required Detection.

29.5.1.1* Where required by other governing laws, codes, or standards

for a specific type of occupancy, approved single and multiple-station
smoke alarms shall be installed as follows:

(1)*In all sleeping rooms and guest rooms
(2)* Outside of each separate dwelling unit sleeping area, within 21 ft (6.4

m) of any door to a sleeping room, with the distance measured along

a path of travel
(3) On every level of a dwelling unit, including basements
(4) On every level of a residential board and care occupancy (small

facility), including basements and excluding crawl spaces and

unfinished attics
(5)*In the living area(s) of a guest suite
(6) In the living area(s) of a residential board and care occupancy

(small facility)
(Reprinted with permission from NFPA 72

Signaling Code Copyright © 2010 National Fire Protection Association,
Quincy, MA 02269. This reprinted material is not the complete and
official position of the National Fire Protection Association, on the
referenced subject which is represented only by the standard in its
entirety), (National Fire Alarm and Signaling Code® and NFPA 72® are
registered trademarks of the National Fire Protection Association, Inc.,
Quincy, MA 02269).

California State Fire Marshal (CSFM)

Early warning detection is best achieved by the installation of fire detection
equipment in all rooms and areas of the household as follows: A Smoke
Alarm installed in each separate sleeping area (in the vicinity, but outside
bedrooms), and Heat or Smoke Alarms in the living rooms, dining rooms, bed­rooms, kitchens, hallways, finished attics, furnace rooms, closets, utility and
storage rooms, basements, and attached garages.

LOCATIONS TO AVOID FOR SMOKE ALARMS

For best performance, it is recommended you AVOID installing Smoke
Alarms in these areas:

• Where combustion particles are produced. Combustion particles form

when something burns. Areas to avoid include poorly ventilated kitchens,
garages, and furnace rooms. Keep units at least 20 feet (6 meters) from
the sources of combustion particles (stove, furnace, water heater, space
heater) if possible. In areas where a 20-foot (6-meter) distance is not pos­sible – in modular, mobile, or smaller homes, for example – it is
recommended the Smoke Alarm be placed as far from these fuel-burning
sources as possible. The placement recommendations are intended to
keep these Alarms at a reasonable distance from a fuel-burning source,
and thus reduce “unwanted” alarms. Unwanted alarms can occur if a
Smoke Alarm is placed directly next to a fuel-burning source. Ventilate
these areas as much as possible.

• In air streams near kitchens. Air currents can draw cooking smoke into

the sensing chamber of a Smoke Alarm near the kitchen.

®

, National Fire Alarm and

3

Continued...

LIMITATIONS OF SMOKE ALARMS

Smoke Alarms have played a key role in reducing deaths resulting from home
fires worldwide. However, like any warning device, Smoke Alarms can only
work if they are properly located, installed, and maintained, and if smoke
reaches them. They are not foolproof.

Smoke alarms may not waken all individuals. Practice the escape plan
at least twice a year, making sure that everyone is involved – from kids to
grandparents. Allow children to master fire escape planning and practice
before holding a fire drill at night when they are sleeping. If children or others
do not readily waken to the sound of the smoke alarm, or if there are infants
or family members with mobility limitations, make sure that someone is
assigned to assist them in fire drill and in the event of an emergency. It is rec­ommended that you hold a fire drill while family members are sleeping
in order to determine their response to the sound of the smoke alarm while
sleeping and to determine whether they may need assistance in the event
of an emergency.

Smoke Alarms cannot work without power. Battery operated units cannot
work if the batteries are missing, disconnected or dead, if the wrong type
of batteries are used, or if the batteries are not installed correctly. AC units
cannot work if the AC power is cut off for any reason (open fuse or circuit
breaker, failure along a power line or at a power station, electrical fire that
burns the electrical wires, etc.). If you are concerned about the limitations
of battery or AC power, install both types of units.

Smoke Alarms cannot detect fires if the smoke does not reach them.
Smoke from fires in chimneys or walls, on roofs, or on the other side of closed
doors may not reach the sensing chamber and set off the alarm. That is why
one unit should be installed inside each bedroom or sleeping area—especial­ly if bedroom or sleeping area doors are closed at night—and in the hallway
between them.

Smoke Alarms may not detect fire on another floor or area of the home.
For example, a stand-alone unit on the second floor may not detect smoke
from a basement fire until the fire spreads. This may not give you enough time
to escape safely. That is why recommended minimum protection is
at least one unit in every sleeping area, and every bedroom on every level
of your home. Even with a unit on every floor, stand-alone units may not
provide as much protection as interconnected units, especially if the fire starts
in a remote area. Some safety experts recommend installing interconnected
AC powered units with battery back-up (see “About Smoke Alarms”) or pro­fessional fire detection systems, so if one unit senses smoke, all units alarm.
Interconnected units may provide earlier warning than stand-alone units since
all units alarm when one detects smoke.

Smoke Alarms may not be heard. Though the alarm horn in this unit meets
or exceeds current standards, it may not be heard if: 1) the unit is located
outside a closed or partially closed door, 2) residents recently consumed
alcohol or drugs, 3) the alarm is drowned out by noise from stereo, TV, traffic,
air conditioner or other appliances, 4) residents are hearing impaired or sound
sleepers. Special purpose units, like those with visual and audible alarms,
should be installed for hearing impaired residents.

Smoke Alarms may not have time to alarm before the fire itself causes

damage,injury,ordeath,sincesmokefromsomefiresmaynotreach

the unit immediately. Examples of this include persons smoking in bed,
children playing with matches, or fires caused by violent explosions
resulting from escaping gas.

Smoke Alarms are not foolproof. Like any electronic device, Smoke Alarms

are made of components that can wear out or fail at any time. You must test
the unit weekly to ensure your continued protection. Smoke Alarms cannot
prevent or extinguish fires. They are not a substitute for property or life
insurance.

Smoke Alarms have a limited life. The unit should be replaced immediately
if it is not operating properly. You should always replace a Smoke Alarm
after 10 years from date of purchase. Write the purchase date on the space
provided on back of unit.

First Alert® is a registered trademark of the First Alert Trust.

Printed in China M08-0410-010 04/14

4