First Alert M08-0222-000, 725 User Manual

USER’S MANUAL

MOTION SENSING HANDS-FREE SOCKET

at. PIR 725

120VAC, 60 Hz, 100W Max.

US Patent D320,595

This user’s manual contains important information about your Motion Sensing Hands Free Socket’s operation. If you are installing this unit for use by others, you must leave this manual—or a copy of it—with the end user.

Distributed by BRK Brands, Inc., Aurora, IL 60504-8122 Consumer Affairs: Monday-Friday, 7:30am-5pm (Central Time): (800) 323-9005. Internet: www.firstalert.com

The First Alert®Motion Sensing Hands Free Socket senses your approach

and automatically turns on the light. The light remains on as long as the motion sensor detects activity in the room, turning the light off approximately 4 minutes after you leave the area.

The Motion Sensing Hands Free Socket is ideal for walk-in closets, laundry room, utility room or basement. It offers the convenience of automatic lighting where you might otherwise have to search for a wall switch or pull string.

Use the Motion Sensing Hands Free Socket in any area or room that is equipped with a

The motion sensor is not designed for use with an enclosed or shaded bulb of any kind. Use only with a ceiling-mounted, bare bulb light socket. DO NOT use with halogen bulbs.

IMPORTANT! PLEASE READ CAREFULLY AND SAVE.

ceiling-mounted, bare bulb light socket.

M08-0222-000 10/09

SPECIAL FEATURES

The Motion Sensing Hands Free Socket:

• Detects motion in all directions–approximately 360º.

• Senses activity at a distance of 12 feet (when mounted at a height of 8 feet above the floor).

• Turns the light off automatically approximately 4 minutes after movement in the area stops.

• Works in full daylight, in darkness, and at any light level in between.

• Uses a standard incandescent bulb up to 100 watts or a compact fluorescent bulb up to 50 watts.

WHERE TO MOUNT THE UNIT

Be sure the socket selected is at least 12 inches from any wall or door. Choose

any ceiling-mounted, bar

Motion Sensing Hands Fr

feet, the

8 person five feet tall at a distance of 12 feet. If the Motion Sensing Hands Free Socket is mounted higher than 8 feet, it will “see” somewhat farther

e bulb light socket. Mounted at a height of

ee Socket will sense the approach of a

Model

PIR 725

. If it is

mounted lower than 8 feet, it will not “see” quite as

ar. Do not mount the

f Motion Sensing Hands Free Socket higher than

0 feet from the floor.

LIMITATIONS OF MOTION SENSING HANDS FREE SOCKET

This Motion Sensing Hands Free Socket:

• Is for indoor use only.

• Requires AC power to function properly. If AC power to the unit is cut off, it will not work.

Is NOT intended to serve as a safety or security device. It is designed

• for convenience only.

This Motion Sensing Hands Free Socket will not work properly if:

• The socket to which it is connected is defective or if the bulb is burned out.

• It is used with anything other than a ceiling-mounted, bare bulb light socket.

Although the Motion Sensing Hands Free Socket detects changes in temperature, it is not intended to be used as a heat and/or fire detector. Consult NFPA Standard 72, National Fire Alarm Code, for residential smoke detection and fire protection guidelines.

Although this Motion Sensing Hands Free Socket detects motion 360º, the unit responds more effectively at each 180º point. (See figure right.) The 180º points are marked on the top of the unit by arrows. After installing the unit, rotate it until either arrow faces the general direction of the path people will most likely cross.

In hot temperature environments over 90 degrees Fahrenheit, use a maximum 75W bulb.

This device is designed for INDOOR USE ONLY. Do not allow it to get wet.

Infrared cannot penetrate glass or plastic. Do not use in a glass-enclosed light or shaded lamp. USE ONLY WITH A CEILING-MOUNTED, BARE BULB LIGHT SOCKET.

INSTALLING THE MOTION SENSOR

Never touch the Motion Sensing Hands Free Socket, bulb, or socket with wet hands or when the floor is damp or wet.

Turn the light OFF when installing the unit.

1. Turn the power to the light socket you have chosen OFF.

2. Remove the light bulb from the socket.

3. Screw the Motion Sensing Hands Free Socket directly into the empty socket.

4. Screw the light bulb into the Motion Sensing Hands

ee Socket.

n the power ON. After several seconds, the light

The unit is now ready to operate automatically.

It is possible that the light may turn off while you are within the sensing area. For example, you may have been standing still.

n on. The light will r

will tur 4 minutes after you leave the area. (A built-in delay of several seconds allows the light bulb to cool before the motion sensor is able to detect motion again.)

emain on for approximately

TROUBLESHOOTING

ONSUMER AFFAIRS 1-800-323-9005

he lights do not turn on 1. Bulb is burned out

hen movement is detected 2. Power switch is OFF

The lights turn on and off 1. Bulb is more than 100 watts repeatedly 2. Motion Sensing Hands Free Socket must be mounted at

The light stays on 1. Bulb is more than 100 watts continuously 2. Motion Sensing Hands Free Socket must be mounted at

Sensing range is reduced 1. Very warm temperatures can temporarily reduce the

NOTE: If the Motion Sensing Hands Free Socket is less than 12 inches away from a

door or wall, reduce bulb wattage or apply masking or electrical tape over a portion of the sensor lens in direct line with the wall or door to reduce reflection.

3. Rotate directional alignment arrows

4. Bulb wattage may be too low

least 12 inches from any wall or door

3. Heat sources in target area

least 12 inches from any wall or door

3. Heat sources in target area Temporary power failure–turn light off and on again

sensing range of the Motion Sensing Hands Free Socket

CLEANING AND REPAIRING

To clean the Motion Sensing Hands Free Socket:

1. Turn the light OFF.

2. Remove the Motion Sensing Hands Free Socket and bulb from the light socket.

3. Wipe the unit with a soft cloth.

Do not allow the unit to get wet or be submerged in water.

Never touch the Motion Sensing Hands Free Socket, bulb, or socket with wet hands or when the floor is damp or wet.

Always turn the light OFF when cleaning.

Do not attempt to repair your Motion Sensing Hands Free Socket yourself. If it does not appear to be working properly and it is still under warranty, return it to BRK Brands, Inc. If the unit is no longer under warranty, please discard it and replace it with a new unit.

Do not use harsh cleaners of any kind.

LIMITED WARRANTY

Coverage: BRK Brands, Inc. warrants its enclosed Motion Sensing Hands Free Socket to be free from defects in materials and workmanship under normal use for a period of three years from the date of purchase. During the first year after the date of purchase, BRK Brands, Inc. will replace any defective Motion Sensing Hands Free Socket without charge. During the next two years, BRK Brands, Inc. will replace any defective Motion Sensing Hands Free Socket at a charge to you not to exceed BRK Brands, Inc.’s cost. This is your exclusive warranty.

This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. Dealers, service centers, or retail stores selling this product do not have the right to alter, modify or any way change the terms and conditions of this warranty. In new construction, if your Motion Sensing Hands Free Sockets were installed by a contractor, this warranty is valid for the homeowner at the time of installation from the date of original installation and is not transferable.

This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, or use contrary to the operating instructions, disassembly, repair or alteration by anyone other than BRK Brands, Inc. Further, the warranty does not cover acts of God, such as fire, flood, hurricanes and tornadoes.

BRK Brands, Inc. shall not be liable for any incidental or consequential damages caused by the breach of any express or implied warranty. Except to the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose is limited in duration for 3 years. Some states, pr jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary fr province to province.

Service: Units that are under warranty and require service, please contact the Consumer Af

First Alert®is a r

Made in China

fairs Department (800) 323-9005, Mon-Fri, 7:30am-5:00pm CST

ed trademark of The First Alert T

egister

om state to state, or

rust.

M08-0222-000 10/09

ovinces, or