First Alert K596-1 9 User Manual
5HDG\*XDUG5(1
6HFXULW\6\VWHP
OFF
AWAY
STAY
AUX
8VHU*XLGH
K5964-1 9/01
7$%/(2)&217(176
SYSTEM OVERVIEW
Features ..................................................................................................................................................3
General Operation ..................................................................................................................................5
Quick View of System Functions...........................................................................................................7
About the Master Keypad.......................................................................................................................9
Master Keypad Definitions...................................................................................................................10
About the Display and Indicators .........................................................................................................12
SECURING THE PREMISES
Checking System Status........................................................................................................................13
Arming the System...............................................................................................................................14
Entry/Exit Delays..................................................................................................................................16
Disarming the System...........................................................................................................................17
Bypassing Protection Zones .................................................................................................................18
Panic Keys / Chime Mode....................................................................................................................19
USER FUNCTIONS
Paging Feature......................................................................................................................................20
Using Powerline Carrier Device Commands (Lights On/Lights Off keys)...........................................21
Message Recording/Playback/Volume Control....................................................................................2 2
Aux Function........................................................................................................................................23
Clock/Calendar.....................................................................................................................................24
Scheduling User Interface.....................................................................................................................25
Remote Phone Control Feature.............................................................................................................30
Speaker Phone Feature.........................................................................................................................32
FIRE ALARM SYSTEM
General Information .............................................................................................................................33
National Fire Protection Association’s Smoke Detector Recommendations........................................34
Emergency Evacuation.......................................................................................................... ...............35
SYSTEM FUNCTIONS
Security Codes......................................................................................................................................36
Testing the System................................................................................................................................37
Trouble Messages.................................................................................................................................38
Maintaining Your System.....................................................................................................................39
SUMMARY OF AUDIBLE NOTIFICATION
FCC STATEMENTS
OWNER’S INSURANCE PREMIUM CREDIT REQUEST
INDEX
........................................................................................................................................................44
LIMITATIONS OF THIS ALARM SYSTEM
ONE YEAR WARRANTY
Congratulations on your ownership of a First Alert Professional Security System. You have made a wise decision in
choosing it, for it represents the latest in security protection technology today. First Alert Professional is one the
world's largest manufacturer of security systems, and millions of premises are protected by First Alert Professional
products.
...............................................................................................................................3
..................................................................................................................13
..................................................................................................................................20
..........................................................................................................................33
............................................................................................................................36
.......................................................................................40
.................................................................................................................................41
.................................................................42
.......................................................................................46
.......................................................................................................................48
– 2 –
6<67(029(59,(:
Features
General Information
This system offers you three forms of protection: burglary, fire, and emergency, depending on the
configuration of your system. The system consists of a master keypad for controlling system operation,
various wireless sensors that provide perimeter and interior burglary protection, and optional smoke or
combustion detectors to provide early fire warning. In addition, optional wireless keypads may have been
installed to allow you to control the system away from the master keypad. The system may also be
controlled from a remote telephone and can be used as a speaker phone.
The system uses microcomputer technology to monitor all protection zones and system status, display
appropriate information on the keypad display, and initiate appropriate alarms. Your system may also have
been programmed to automatically send alarm or status messages over the phone lines to a central alarm
monitoring station, and may also be capable of two-way voice communication with the central station.
The user features of this security system are listed below. Ask your installer which features have been
programmed for your system.
•
STAY and AWAY arming modes: By using these modes you can protect either the perimeter only, or
the entire premises.
•
3 pa nic key functions: Designated keys allow you to manually activate fire, personal emergency, or
silent alarms. Refer to the PANIC KEYS section for detailed information.
•
Paging feature: Alerts you to certain system conditions by displaying code numbers that indicate the
type of condition that has occurred. In addition, pressing the AUX key can send a predefined message to
your pager, if programmed to do so (see AUX key function below). Refer to the PAGING FEATURE
section for detailed information.
•
Real-time clock: Keypad displays current time. Refer to the CLOCK/CALENDAR section for
procedures for setting the time.
•
Voice announcement of system status: The master keypad’s built-in speaker announces system status at
the press of a key. Refer to the CHECKING SYSTEM STATUS section for detailed information.
•
Message center: The system allows recording and play back of brief messages. Refer to the
RECORDING/PLAYBACK MESSAGES section for procedures.
•
Device activation: Designated keys allow you to turn lights and/or other devices on and off. In addition,
some devices (e.g., a light) may be programmed to activate automatically as a result of a system event
such as an alarm or trouble condition. Refer to the USING POWERLINE CARRIER DEVICE
COMMANDS section for detailed information.
•
AUX key function: Designated key lets you activate a predefined series of keystrokes with a single press
of the
FUNCTION section for detailed information.
•
Scheduling feature: Allows you to schedule the automatic activation or deactivation of X-10 devices or
program events (e.g. alarm clock, reminder, and latch key).
AUX
key plus user code, if programmed to do so (see Paging feature above). Refer to the AUX
– 3 –
6<67(029(59,(:
Features
•
Two-way voice: Allows the central station to listen, talk to or conduct two-way conversations with
individuals on the premises Refer to the TWO-WAY VOICE section for detailed information.
•
Phone Control: P rovides a remote interactive phone capability that permits access to the security system
from any off-site touch-tone telephone.
•
Speaker Phone Operation: The system is capable of operating as a speaker phone allowing hands free
telephone conversation.
•
Security Codes: The system is capable of supporting an Installer code, Master user code and six
additional User codes. Refer to the SECURITY CODES section for detailed information.
– 4 –
6<67(029(59,(:
General Operation
Zones
Your system's sensing devices have been assigned to various "zones." For example, the sensing device on
your entry/exit door may have been assigned to zone 01, sensing devices on windows in the master bedroom
to zone 02, and so on. These numbers appear on the display when an alarm or trouble condition occurs.
8
Fire Protection
The fire protection portion of your security system (if used) is always active and will sound an alarm if a
fire condition is detected. Refer to the FIRE ALARM SYSTEM section for important information concerning
fire protection, smoke detectors and planning emergency exit routes from the premises.
Burglary Protection
Your system provides two modes of burglary protection: STAY and AWAY. STAY mode protects the
perimeter only, allowing you to freely move within inside the premises. AWAY mode protects the entire
system. Both modes provide an entry delay time that allows you to reenter the premises without setting off
an alarm. Fo r additional security, you can turn the entry delay off when arming the system by using the
NO DELAY
zones before arming the system, if desired. Refer to the BYPASSING PROTECTION ZONES section. The
system also provides a CHIME mode, for alerting users to the opening of protected doors and windows
while the system is disarmed.
You must turn on ("arm") the burglary protection portio n of your system before it will sense burglary
alarms. To arm the system, enter your user code then press the desired arming key (AWAY or STAY).
Refer to the ARMING THE SYSTEM section for detailed procedures and information.
ReadyGuard-REN is not intended for UL985 Household Fire applications unless a 24-hour
/
backup battery (P/N LYNXRCHKIT-HC) is installed.
key in combination with the desired arming key. The system also allows you to bypass selected
Security Codes
At the time of installation, you were assigned a personal 4-digit security or “master user” code. You must
enter the user code when arming and disarming the system, and when performing other system functions. As
an additional security feature, other users who do not need to know your code can be assigned up to 6
different security codes. Refer to the SECURITY CODES section for procedures on adding security codes to
the system.
Alarms
When an alarm o ccurs, the keypad and external sounders will sound for about 15-seconds, and the keypad
will display the zone(s) causing the alarm. After 15-seconds, the siren stops temporarily and voice
– 5 –
6<67(029(59,(:
General Operation
announcements of the zones in alarm begins. When these zones have been announced, the siren sounds
again
and the cycle repeats itself, until the system is disarmed (code + OFF) or until alarm bell timeout
occurs. If your system is co nnected to a central monitoring station, an alarm message will be sent. To stop
the alarm sounding, simply disarm the system. The zone(s) causing the alarm remain displayed indicating
memory of alarm. Refer to the DISARMING THE SYSTEM section for information about clearing the
memory of alarm display
Two-Way Voice Feature
The ReadyGuard-REN supports voice dialog between an operator at the central station and an individual at
the premises. This feature allows the central station to listen, talk to or conduct a two-way conversation with
an individual(s) at the premises and allows the operator to gather information about the nature and location
of the alarm that may be helpful in responding to fire, police or rescue departments. If the Two-way Voice
Feature has been programmed and an alarm condition is detected the system sends an alarm message to the
central station. After acknowledgement is received, a “listen in to follow” message is sent to the central
station. By responding to this message the central station operator can enter commands that allow him to
initiate a 5-minute voice session. The options allow the operator to enter the following modes:
•
Talk: Allows the operator to speak to individuals at the premises through the system speaker.
•
VOX (2-way voice): Allows the operator to hold a two-way (speak and listen) conversation with
individuals at the premises.
•
Listen: Allows the operator to listen to any activity at the premises through the system microphone.
If a subsequent zone is violated during a voice session, the system will terminate the session and process the
alarm. During the voice session, the ARMED (red) and READY (green) LEDs will alternately blink in the
Talk and VOX Modes but not during Listen Mode.
– 6 –
48,&.9,(:2)6<67(0)81&7,216
NOTE:
SECURITY FUNCTIONS
Checking system status:
To arm in STAY m o d e :
Boxes represent the entering of your 4-digit user code.
=
----------------------
---------------------
STATUS
*
+
STAY
To restart exit delay:
To arm in AWAY mode:
To arm with NO DELAY:
To arm if Quick Arm is active:
To disarm system and silence alarms:
To bypass a zone(s):
To turn Chime mode on or off:
*
Security code is not required if Quick Arm is active. Instead, press and hold down the STAY
-------------------------
--------------------
------------------
-------------
-----
--------------------------
-------------
STAY (only if programmed and system armed in Stay mode)
* + AWAY
*
AWAY
+ OFF
+ BYPASS
FUNCTION + CHIME
or
STAY (hold down for at least 2 seconds)
+
AWAY or STAY
+
2-digit zone number(s)
MESSAGE CENTER
To record a message:
-------------------------
To stop recording before end of 20 secs:
To play back a message:
---------------------
FUNCTION
-
OFF
FUNCTION
+
RECORD
+
PLAY
VOLUME ADJUSTMENT
To adjust message playback/announcement volume:
To mute system announcements:
To restore/unmute announcements:
-----------
-------
FUNCTION
FUNCTION
-
FUNCTION
+
+
VOLUME
VOLUME + [3] or [6]
+
VOLUME + [3] or [6]
+
OFF
SPEAKER PHONE OPERATION
To enter speaker phone mode:
--------------
[#]
+
AUX
+
NO DELAY
or AWAY key.
To exit speaker phone mode:
To enable/disable (toggle) ringer:
To return the keypad to telephone mode
[#] + AUX
To flash
*To return to first call wait at least two (2) seconds and enter
(switch between two calls using call waiting):
---------------
----------
OFF
+
[#]
VOLUME + AUX
(after clearing an alarm or trouble or after disarming the system):
AUX
AUX
– 7 –
*
again
.
48,&.9,(:2)6<67(0)81&7,216
REMOTE PHONE CONTROL OPERATION
To remotely disarm:
To remotely arm in AWAY mode:
To remotely arm in STAY mode:
--------------------------
---------
----------
To remotely arm in AWAY or STAY mode with NO DELAY:
To remotely activate X-10 devices 1-6:
To remotely activate X-10 devices 7 & 8:
To remotely deactivate X-10 devices 1-6:
To remotely deactivate X-10 devices 7 & 8:
To remotely bypass a zone:
To remotely activate forced bypass:
To remotely check system status:
To hang up:
*If forced bypass was enabled by your installer.
-------------------------------------
OTHER FUNCTIONS
To set the time and date:
To set scheduling:
-----------------------------
To activate X-10 devices 1-6:
To activate X-10 devices 7 & 8:
To deactivate X-10 devices 1-6:
------------------
-------
----------
---------------------
---------------
------------
------------
To activate or deactivate X-10 dev. 7 & 8:
To add a user code:
To delete a user code
To turn Test mode on:
To turn Test mode off:
To use the defined AUX function:
To send message to pager:
** Only the master code can be used to add or delete another user code.
--------------------------
(except Mas ter Code)
------------------------
-----------------------
----------
-------------------
[#] + [4] + device no
---
[#] + [7] + device no.
[*]
FUNCTION
+ FUNCTION +LIGHTS ON + device number
FUNCTION + LIGHTS OFF
+ FUNCTION +LIGHTS OFF + device number
** + CODE + user no. (02-08)+ user code
:-
** + CODE
+ TEST
+ OFF
Press and hold AUX key 2 seconds (4 beeps)
Press and hold AUX key 2 seconds (4 beeps)
+
[1]
+
[2]
+
[3]
+
.
[#] + [4] + device no.
+
[#] + [7] + device no.
+
[6] + zone no.
+
[6] + [#]*
+
[9]
+
FUNCTION
+
FUNCTION
+
LIGHTS ON
+
+
device number
+
device number
+
user number
+
[2] or [3] + [0]
+
[63]
[64]
02-08)
(
+
– 8 –
6<67(029(59,(:
About the Master Keypad
General
IMPORTANT: If the keypad beeps rapidly upon entering the premises, an alarm has occurred during your
absence and an intruder may still be on the premises. LEAVE IMMEDIATELY and CONTACT THE
POLICE from a nearby safe location.
The keypad allows you to control all system functions. In the speaker phone mode the keypad becomes a
full-function telephone keypad The keypad features telephone-style keys and a Liquid Crystal Display
(LCD), which shows the nature and location of all occurrences.
ARMED READY
OFF
AWAY
STAY
AUX
123
RECORD VOLUME PLAY
456
LIGHTS ON TEST BYPASS
789
LIGHTS OFF CODE CHIME
0
*
ST ATU S NO DELAY FUNCTION
#
01100-006-V0
The keypad also features a built-in sounder, which will sound during alarms and troubles. The keypad also
"beeps" during certain system functions, such as during entry/exit delay times, in Chime mode, and when
depressing any of the keys (to acknowledge the key press). In addition, a built-in speaker announces system
status.
– 9 –
6<67(029(59,(:
Master Keypad Definitions
20
21
1
2
3
19
ARMED READY
18
17
OFF
AWAY
STAY
AUX
123
RECORD VOLUME PLAY
456
LIGHTS ON TEST BYPASS
789
LIGHTS OFF CODE CHIME
0
*
STATUS NO DELAY FUNCTION
#
16
15
IMPORTANT!:
seconds of one another. If 2 seconds elapse without a key depression, the entry is aborted and must
be repeated from its beginning.
NOTE:
clock.
Different timeouts may occur when defining auxiliary functions and setting the real-time
14
When you use the keypad to enter codes and commands, press the keys within 2
13
12
11
10
4
5
6
7
8
9
01100-007-V0
– 10 –
6<67(029(59,(:
Master Keypad Definitions
NOTE:
The system functions described below are for reference only, and require additional key entries to activate.
DISPLAY WINDOW:
1.
(LCD). Displays protection point identification and
system status, messages, and user instructions.
ARMED INDICATOR:
2.
system has been armed (STAY, AWAY, NO
DELAY). Blinks when armed and fault exists, o
once per second when AVM (VOX or Talk) or
speaker phone mode is active.
READY INDICATOR:
3.
is ready to be armed; blinking indicates system is
not ready (a zone is open). Blinks once per second
when AVM (VOX or Talk) or speaker phone mode
is active.
4.
PLAY
KEY:
Announces a user’s message if one
was previously recorded. See RECORD function.
5.
TEST
Tests the system and alarm
KEY:
sounder.
6.
BYPASS
KEY:
zones from being monitored by the system. Displays
currently bypassed zones.
KEY:
CODE
7.
codes that can be given to other system users.
8.
CHIME
KEY:
off. When on, any entry through a protected delay
or perimeter zone while the system is disarmed
will cause a tone and voice descriptor to sound at
the keypad.
INTERNAL SOUNDER:
9.
(see "Summary of Audible Notifications" section).
FUNCTION
10.
KEY:
functions.
NO DELAY
11.
KEY:
function to eliminate the entry delay. Alarm sounds
immediately if entry is opened.
12.
STATUS
KEY:
the keypad will display all open zones, and will
announce system status.
Liquid Crystal Display
(RED) Lit when the
When lit, indicates system
Removes individual protection
Allows entry of additional user
Turns the Chime mode on and
Source of alarm sounds
Allows alternate key
Used with STAY or AWAY
When pressed prior to arming,
LIGHTS ON
13.
/
LIGHTS OFF
other devices on or off, if programmed by the installer.
KEY:
AUX
14.
Can be programmed to either perform a
predefined function or to send a preset message to a
r
15.
pager.
STAY
KEY:
Arms the perimeter burglary protection,
guarding protected doors, windows and other perimeter
protection points, and sounds an alarm if one is opened.
Interior protection is not armed, which allows
movement within your house without causing an alarm.
Entrance can be made through an entry delay zone
without causing an alarm if the system is disarmed
before the entry delay time expires.
16.
Completely arms both perimeter and
KEY:
AWAY
interior burglary protection for backup protection by
sensing an intruder's movements through protected
interior areas as well as guarding protected doors,
windows, etc. Entrance can be made through an entry
delay zone without causing an alarm if the system is
disarmed before the entry delay time expires.
17.
Disarms the burglary portion of the
KEY:
OFF
system, silences alarms and audible trouble indicators,
and clears alarm trouble display after the problem has
been corrected.
MICROPHONE:
18.
Used to record personal messages
up to 20 seconds long, and for 2 way voice and speaker
phone.
SPEAKER:
19.
Source of audible internal warning and
confirmation sounds, status announcements, as well as
alarms (see "Summary of Audible Notifications").
RECORD:
20.
Activates the recording function to record
personal messages.
VOLUME:
21.
Sets the volume of system announcements
and status beeps.
KEYS 0-9:
––
Used to enter your individual security
access code(s).
KEYS:
Turns lights or
– 11 –
6<67(029(59,(:
ALARM
AWAY
INSTANT
STAY
FIRE
REC MESSAGE
BYPASS
FAULT
CHIME TEST
LOW BAT AC
About the Display and Indicators
Display Definitions
ALARM:
Appears when the system is armed and an intrusion has been detected (also appears
(for other displays, see
Trouble Messages
during a fire alarm or audible emergency alarm). Accompanied by the protection zone
that is in alarm.
AWAY:
INSTANT:
STAY:
8
8
ReadyGuard-REN is not intended for UL985 Household Fire applications unless a 24-hour backup
/
/
battery (P/N LYNXRCHKIT-HC) is installed.
All burglary zones, interior and perimeter, are armed.
Entry delay is turned off.
Perimeter burglary zones, such as protected windows and doors, are armed.
FIRE: Appears when a fire alarm or fire fault is present. Accompanied by a display of the zone
that is in alarm.
LOW BAT: Low battery condition in a wireless sensor (if zone number is displayed) or low system
battery (if no zone number is displayed). If 00 is displayed, a wireless keypad (5827) has
a low battery condition.
AC: Appears when AC power is present. If not displayed, the system is operating on backup
battery power.
CHIME: Appears when the Chime feature is activated.
TEST: Appears when the system is in Test mode.
REC: Appears when the system is in Recording mode.
MESSAGE: Appears when a message has been recorded and has not yet been played back.
BYPASS: Appears when one or more burglary protection zones have been bypassed.
FAULT: Appears at any time a malfunction is discovered in the system; or any time an open is
detected in a fire zone; or when a fault in a day/night burglary zone is discovered during
a disarmed period. Accompanied by a display of the zone number in trouble.
PH: Appears in place of the clock when the speaker phone mode is active.
PC: Appears during a remote phone control session.
LED Meanings
ARMED LED: ON = System armed
(Red) OFF = System disarmed
Blinking = System armed , but a fault exists
Blinking alternately with READY LED = AVM (VOX or Talk) or speaker phone mode
is active
READY LED: ON = System disarmed, ready to arm
(Green) OFF = System armed
Blinking = System disarmed, not ready to arm (a fault exists)
Blinking alternately with ARMED LED = AVM (VOX or Talk) or speaker phone mode
is active.
)
– 12 –
6(&85,1*7+(35(0,6(6
Checking System Status
General Information
Before arming your system, all protected doors, windows, and other protection zones must be closed or
bypassed (see the BYPASSING PROTECTION section). Pressing the
STATUS
that are faulted, as well as any other abnormal system condition, making it easier for you to secure any open
zones.
READY LIGHT: The green READY indicator on the keypad will be lit if the system is ready to be
armed. If blinking, the system is not ready.
Press the STATUS Key
Press the
the system the following phrases may be heard:
disarmed, ready to arm [message] [check system]
disarmed, [not ready to arm], [message]
armed [away] [stay] [instant] [check system] [message]
NOTE: The phrases shown in brackets are variable, and are announced only if appropriate in the current
Press the
of the system the following phrases may be heard:
fire alarm [zone voice descriptors]
alarm [zone voice descriptors]
fire fault [zone voice descriptors]
fault [zone voice descriptors]
low battery [zone voice descriptor]
system low battery
check system
AC loss
zones bypassed
chime
VOLUME LEVEL:
MESSAGE RECORDING/PLAYBACK section for the procedure.
STATUS
key once to announce the general status of the system. Depending on the current state of
state of the system.
STATUS
key a second time† to announce specific system status. Depending on the current state
The volume level of system announcements can be increased or decreased. Refer to the
†
(second depression must be made within 10 seconds of the first)
System Can Be Armed
The READY LED will be lit once all protection zones have been closed or bypassed. You may now arm the
system as usual.
key will announce all zones
– 13 –
6(&85,1*7+(35(0,6(6
Arming the System
Arming in Stay Mode
Use this mode when you are staying home, but expect someone to use the entrance door later. Close all
protected perimeter windows and doors before arming. The green READY indicator on the keypad should
be lit if the system is ready to be armed.
To arm in STAY mode:
** See Quick Arming paragraph.
Your User code
**
+
or press and hold
STAY
STAY
**
The keypad beeps three times and displays the armed STAY message. The red ARMED indicator lights and
the system announces “armed STAY–exit now.”
When armed in STAY mode, the system will sound an alarm if a protected door or window is opened, but
you may otherwise move freely throughout the premises. Late arrivals can enter through the entrance door
without causing an alarm, but they must disarm the system within the entry delay period or an alarm will
occur.
Restarting Exit Delay While System Armed
Ask your installer if this feature is active for your system. If active, you can restart the exit delay at any time
after arming in STAY mode. This is useful if you wish to open the entry/exit door to let someone in after
arming the system, and avoids having to disarm the system and then re-arm it again.
To restart exit delay while system is armed in STAY mode: Press STAY
key
Arming In Away Mode
Use this mode when no one will be staying on the premises. Close all protected perimeter windows and
doors before arming. The green READY indicator on the keypad should be lit if the system is ready to be
armed.
To arm in AWAY mode:
** See Quick Arming paragraph.
Your User code
**
+
or press and hold
AWAY
AWAY
The keypad beeps twice, or beeps continuously if exit warning has been programmed for your system, and
displays the armed AWAY message. The red ARMED indicator lights and the system announces “armed
AWAY–exit now.”
When armed in AWAY mode, the system will sound an alarm if a protected door or window is opened, or if
any movement is detected inside the premises. You may leave through the entrance door during the exit
delay period without causing an alarm. You may also re-enter through the entrance door, but you must
disarm the system within the entry delay period or an alarm will occur.
**
– 14 –
6(&85,1*7+(35(0,6(6
Arming the System
Arming the System With No Delay
Use NO DELAY with STAY mode when you are staying home and do not expect anyone to use the
entrance door.
Use NO DELAY with AWAY mode when the premises will be vacant for extended periods of time such as
vacations, etc.
When armed with NO DELAY, the system will sound an alarm if a protected door or window is opened,
including the entrance door. You may leave through the entrance door during the exit delay period without
causing an alarm, but an alarm will sound as soon as someone reenters.
To arm with NO DELAY:
** See Quick Arming paragraph.
Your user code
**
+
AWAY
or
Quick Arming
If Quick Arm was p rogrammed by the installer, you do not need to enter the security code to arm the
system. Instead, simply press and hold down the desired arming key for at least 2 seconds. The security
code must always be used to disarm the system, however.
To arm if Quick Arm is active:
To arm with NO DELAY if Quick Arm is active:
least 2 seconds
IMPORTANT: The Babysitter Code and Installer Code cannot disarm the system unless it was used to arm
the system. In addition, if the system is armed by pressing and holding the Quick-Arm buttons, neither the
Babysitter Code nor Installer Code can disarm the system.
AWAY
or
STAY
hold down for at least 2 seconds
AWAY
or
STAY
STAY
+
NO DELAY
then
NO DELAY
hold down for at
– 15 –
Loading...