FireplaceXtrordinair 98500507 User Manual

FPX 32 DVS Artisan Face

Charcoal 98500507 Antique Copper 98500508 Antique Nickel 98500509

Compatibility

• DVS Insert • 31 DVI Insert

NOTE: On newer units (2008 or later), leave the glass on and move the face connector to the forward

position (see illustration below). For older units, remove the glass.

Remove the face connector bracket from the heater (on both sides).

Face Connector Bracket

Re-attach the face connector to the heater using the forward mounting holes.

Warnings

Denatured

Soft Cloth

Anti-

Oxidizer

Alcohol

Soft Cloth

Packing List

Plated Surfaces Warning:

Any marks left on the optional plated surface may become etched-in by the heat of the appliance. Use denatured alcohol and a soft cloth to clean.

Copper Surfaces Warning: Use the included anti-oxidizer to clean the optional copper surface. See the included instruction

sheet for full details.

Warning: Make sure the heater has fully cooled prior to conducting service.

10-24 Nuts

1/4-20 Screws

Bracket Installation

FPX 32 DVS Artisan Face

Charcoal 98500507 Antique Copper 98500508 Antique Nickel 98500509

NOTE: The brackets install with this pair of closely spaced flanges at the top.

Install the face mounting brackets to the heater with the included nuts.

+ 2 hidden pages