FireplaceXtrordinair 98500507 User Manual

FPX 32 DVS Artisan Face

Compatibility

• DVS Insert • 31 DVI Insert

NOTE: On newer units (2008 or later), leave the glass on and move the face connector to the

Charcoal: 98500507 Patina Bronze: 95300398

forward position (see illustration below). For older units, remove the glass.

Remove the face connector bracket
from the heater (on both sides).

Face Connector
Bracket

Re-attach the face connector to the
heater using the forward mounting holes.

Warnings

Warning:
Make sure the heater has fully cooled prior to conducting service.

Hand-Rubbed Patina Finishes

The optional patina finish is hand applied by a skilled artisan to permanently alter the metal colors and
texture of the face. Each face is individually hand-polished and fired in an oven which imparts unique color
subtleties with no two finishes alike. The patina finish on your face is a “living” color and will age and antique
over time. Enjoy the timeless, rich luster of your beautiful new face.

Packing List

10-24 Nuts

1/4-20

Screws

Page 1 of 3 17601079 - 9/14/11 © Travis Industries, Inc.

FPX 32 DVS Artisan Face

Bracket Installation

Install the face mounting brackets to

Charcoal: 98500507 Patina Bronze: 95300398

NOTE: The brackets

install with this pair of

closely spaced

flanges at the top.

the heater with the included nuts.

Face Installation

Attach the face using the four

bolts included with the face.

Adjustable
Wrench

Make sure the door does

not open while installing.

Page 2 of 3 17601079 - 9/14/11 © Travis Industries, Inc.