FIREARMS imr reloading User Guide

Download

Handloader's Guide

For Smokeless Powders

Shotshell • Rifle • Handgun

Before using any of the loading data contained in this guide,

please be sure to read all of the safety information.

SAFETY INFORMATION

This IMR mation on the use of IMR powders to reload shotshell, handgun and rifle ammunition. This for reloading, and we strongly recommend that all handloaders carefully read one or more of the reloading manuals which cover the subject in detail. This discretion and risk. Since we have no control over the circumstances of use, we assume no liability for the results obtained. And we guarantee only that our powders meet our manufacturing standards.

It is possible that changes in components which could affect ballistic performance could occur without our knowledge. The components used and specified in all our data were those that were commercially available to the handloader at the time our tests were conducted. It is the responsibility of the handloader to check each of his components to insure that they are the same as specified in our data.

Improper modifications and/or alterations can render any type of firearm unsafe. All work should be conducted by the manufacturer or a qualified gunsmith. It is highly recommended that a shooter have his guns checked periodically by a qualified gunsmith to insure that they are in safe operating condition. T reat all guns as being loaded and read and practice all the rules of safe gun handling and shooting.

The future of handloading is dependent upon the safe handling and storage of powder and primers and the safe use of all ammunition. In this regard, read and follow the recommendations of the Sporting Arms and Ammunition Manufacturers' Institute, Inc. as published in "Properties and Storage of Smokeless Powder." A copy of this pamphlet is bound into this

Handloader's Guide

Guide

Handloader's Guide.

presents revised and updated infor-

is not intended to be a "how to" manual

is offered to be used at your own

SHOTSHELL

The shotshell data section offers a wide selection of target and field loads. There have been a number of changes and modifications in shotshell components which make it increasingly important that the handloader carefully check all of the components being used to insure that they are the same as shown. If you have reason to question any of your components, contact the manufacturer .

Our goal in developing this shotshell data was to offer a selection of "factory duplication" loads, specifying the average velocity and chamber pressure of the rounds tested. However , not all factory loads can be duplicated because the components utilized are not available to the handloader. All of the ballistics data specified were obtained using once-fired cases and components available to the handloaders at the time our tests were performed.

All of the shotshell data presented were developed using lead shot. Do not attempt to reload any of the loads listed using steel shot. Substituting steel shot in any load developed for lead shot could be very dangerous.

To obtain a reasonable duplication of the ballistic results listed, you must reload exactly as shown. Substitution of components especially primers and/or alteration in powder charge or type of powder could result in extremely dangerous reloads.

Good, uniform, efficient reloads result only from careful reloading procedures. Always check powder and shot weights on a reliable scale, use the exact components specified, seat wads properly and use only cases that are in good condition. Never leave to chance the

powder type and/or weight and the lead shot weight that you are loading in a shell. Inspect all reloaded shells to insure that crimp closely duplicates that of factory loads.

Unfortunately, time and space do not permit publication of loads utilizing all of the many components available. Loading data utiliz-

Guide

ing IMR powders for wads not listed in this by contacting the wad manufacturer .

may be obtained

RIFLE

The rifle data section contains data for most of the popular cartridges. The components specified were those that were commercially available to the handloader at the time the tests were performed.

The powder charge weights specified represent loads that developed Maximum Allowable Chamber Pressures with the test bar- rels used and components specified, with the exception of loads that are specified as (C) compressed charges which may represent case capacity rather than maximum chamber pressure. All tests were conducted utilizing commercial barrels in a Universal Receiver .

It is not unusual for reloads assembled with particular components and fired in the individual reloader's gun to give ballistic results (particularly chamber pressures) that vary in either direction from the published data. T o compensate for any component and/or gun combination that would tend to yield pressures in excess of the published data, it is recommended that the powder charge be reduced 10% initially. (This reduction in powder charge weight should also be made each time that any of the components in the load are changed.) After firing several loads at the lower powder charge weight—without ANY evidence of excessive chamber pressure— the powder charge weight may then be increased in 0.5 grain increments as accuracy needs and pressure indications permit. The subject of excessive pressure along with illustrations is included in most reloading manuals, and should be read before attempting any reloading.

Always make certain that you use the correct ammunition in your rifle.

This data must be used only with IMR Smokeless Powders. Never

use this data for powders that may have similar numerical designations!

HANDGUN

The handgun section contains loads for the more popular handgun cartridges utilizing the handloading components commercially available at the time our tests were conducted. We have also included a section of handgun data for the T/C Contender in cartridge and component combinations of particular interest to the metallic silhouette shooter . Test components used are specified and these exact components must be used to achieve a reasonable duplication of the ballistic data shown.

The powder charge weights specified represent loads that developed Maximum Allowable Chamber Pressures with the test bar- rels and components used, with the exception of loads that are specified as (C) compressed charges and therefore may represent case capacity rather than maximum chamber pressure, and loads that duplicate factory velocity. All tests were conducted utilizing commercial barrels in a Universal Receiver .

Always practice all of the principals of SAFE RELOADING and enjoy good shooting.

RELOADING SAFETY

Reloading ammunition is an enjoyable hobby, and can be conducted safely if certain rules are followed:

1. Exercise care and common sense at all times.

2. Don't become distracted when you are handloading.

3. Never load in haste. A careless mistake can be serious.

4. Use equipment as manufacturer recommends. Never take shortcuts.

5. Store powder in a cool, dry place at all times.

6. Never use a powder unless you are positive of its identity.

7. Never substitute smokeless powder for black powder.

8. Never use IMR powder data for any other powder types with similar numerical designations.

9. Keep powder away from heat and open flames.

10. Never smoke while handling powder.

11. Keep powder out of reach of children.

12. Don't mix powders.

13. Don't keep more powder in an open container than you need.

14. Observe all maximum load warnings in handbooks.

15. Work up all new loads starting 10% below the recommended maximum charge weight.

16. Examine every case before loading to insure it is in good condition.

17. Watch for indications of high pressures in establishing a new load.

18. Never use smokeless powder in firearms designed for black powder .

19. DO NOT use in this guide.

20. Use of safety glasses while reloading is recmmended.

21. Clean up any powder spills immediately. Use dust pan and brush to clean up powder. Dispose of it in accordance with recommended procedures.

22. Make sure powder container is empty before disposing of container .

23. Consult suppliers of components if you have any questions about their use.

24. Check powder charges regularly to insure using proper powder charge weight.

25. Develop a routine for reloading to guard against mistakes.

steel shot

in any of the shotshell loads listed

NOTE:

• It should be recognized that Auto-Loading Shotguns may not function with some of the Low Chamber Pressure Loads.

• Several Handgun Calibers show Chamber Pressure in PSI.

• If you use Military Brass for certain Center-Fire Calibers the maximum powder charges should be lowered from data shown.

• We have included a separate section in the Rifle Data Section that provides recommendations for

various Calibers and Components showing Chamber Pressures in PSI units versus prior data with CUP units for the Chamber Pressure. There will be additions to this section as the data becomes available.

TABLE OF CONTENTS

Page

SHOTSHELL TARGET ..................................... 4

12 gauge target, 24 gram................................ 4

12 gauge target, 1 oz. ................................... 12

12 gauge target, 1 1/8 oz. ............................. 18

20 gauge target............................................. 29

28 gauge target............................................. 32

.410 bore target ............................................ 34

SHOTSHELL FIELD....................................... 34

10 gauge field............................................... 34

12 gauge buckshot ....................................... 35

Page

12 gauge field............................................... 35

16 gauge field............................................... 42

20 gauge field............................................... 44

.410 bore field .............................................. 46

Table of Abbreviations .................................. 46

Powder Table................................................ 46

Chilled Shot Table......................................... 46

RIFLE - CUP DATA ........................................ 47

Weatherby Cartridges.................................... 51

RIFLE - PSI DATA ......................................... 51

HANDGUN.................................................... 54

T/C Contender............................................... 57

Powder Selection Guide ............................... 59

SHOTSHELL TARGET DATA

12 GAUGE 23⁄4 INCH 24 GRAM LOADS

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (FT/SEC) (PSI)

SHELL: FEDERAL PLASTIC GOLD MEDAL, TOP GUN, MULTI PURPOSE Grams**

FEDERAL 209A “HI-SKOR®” 700-X 15.5* WIN . WAA12SL 24 1155 5300 FEDERAL 209A “HI-SKOR” 700-X 16.5* WIN . WAA12SL 24 1205 5900 FEDERAL 209A “HI-SKOR” 700-X 17.5* WIN . WAA12SL 24 1255 6600 FEDERAL 209A “HI-SKOR” 700-X 19.0* WIN . WAA12SL 24 1325 7800 FEDERAL 209A “HI-SKOR” 700-X 15.5* CB. CB1100-12 24 1145 4800 FEDERAL 209A “HI-SKOR” 700-X 16.5* CB. CB1100-12 24 1195 5500 FEDERAL 209A “HI-SKOR” 700-X 17.5* CB. CB1100-12 24 1250 6200 FEDERAL 209A “HI-SKOR” 700-X 19.5* CB. CB1100-12 24 1335 7400 FEDERAL 209A “HI-SKOR” 700-X 15.5* REM. TGT12 24 1145 5000 FEDERAL 209A “HI-SKOR” 700-X 16.5* REM. TGT12 24 1195 5700 FEDERAL 209A “HI-SKOR” 700-X 17.5* REM. TGT12 24 1245 6200 FEDERAL 209A “HI-SKOR” 700-X 19.5* REM. TGT12 24 1325 7100 FEDERAL 209A “HI-SKOR” 700-X 16.0* CB. CB2100-12 24 1160 5300 FEDERAL 209A “HI-SKOR” 700-X 17.0* CB. CB2100-12 24 1210 6000 FEDERAL 209A “HI-SKOR” 700-X 18.0* CB. CB2100-12 24 1260 6600 FEDERAL 209A “HI-SKOR” 700-X 19.5* CB. CB2100-12 24 1330 7500 FEDERAL 209A “HI-SKOR” 700-X 16.0* FED. 12S0 24 1160 5500 FEDERAL 209A “HI-SKOR” 700-X 17.0* FED. 12S0 24 1205 6200 FEDERAL 209A “HI-SKOR” 700-X 18.0* FED. 12S0 24 1255 6800 FEDERAL 209A “HI-SKOR” 700-X 19.5* FED. 12S0 24 1325 7800 FEDERAL 209A “HI-SKOR” 700-X 15.5* ACTIV TG-30 24 1155 6100 FEDERAL 209A “HI-SKOR” 700-X 16.5* ACTIV TG-30 24 1200 6700 FEDERAL 209A “HI-SKOR” 700-X 17.5* ACTIV TG-30 24 1245 7300 FEDERAL 209A “HI-SKOR” 700-X 19.5* ACTIV TG-30 24 1335 8800

REMINGTON 209P “HI-SKOR” 700-X 16.0* WIN . WAA12SL 24 1150 4700 REMINGTON 209P “HI-SKOR” 700-X 17.0* WIN . WAA12SL 24 1205 5400 REMINGTON 209P “HI-SKOR” 700-X 18.0* WIN . WAA12SL 24 1250 5900 REMINGTON 209P “HI-SKOR” 700-X 20.5* WIN . WAA12SL 24 1325 6600 REMINGTON 209P “HI-SKOR” 700-X 16.0* CB. CB1100-12 24 1140 4000 REMINGTON 209P “HI-SKOR” 700-X 17.5* CB. CB1100-12 24 1205 4600 REMINGTON 209P “HI-SKOR” 700-X 19.0* CB. CB1100-12 24 1250 5300 REMINGTON 209P “HI-SKOR” 700-X 21.0* CB. CB1100-12 24 1320 5800 REMINGTON 209P “HI-SKOR” 700-X 16.0* REM. TGT12 24 1150 4200 REMINGTON 209P “HI-SKOR” 700-X 17.0* REM. TGT12 24 1195 4800 REMINGTON 209P “HI-SKOR” 700-X 18.5* REM. TGT12 24 1250 5700 REMINGTON 209P “HI-SKOR” 700-X 21.0* REM. TGT12 24 1330 6500 REMINGTON 209P “HI-SKOR” 700-X 16.5* CB. CB2100-12 24 1140 4000 REMINGTON 209P “HI-SKOR” 700-X 18.0* CB. CB2100-12 24 1195 4500 REMINGTON 209P “HI-SKOR” 700-X 19.5* CB. CB2100-12 24 1265 5200 REMINGTON 209P “HI-SKOR” 700-X 21.0* CB. CB2100-12 24 1330 6300 REMINGTON 209P “HI-SKOR” 700-X 16.5* FED. 12S0 24 1160 4800 REMINGTON 209P “HI-SKOR” 700-X 17.5* FED. 12S0 24 1205 5300 REMINGTON 209P “HI-SKOR” 700-X 18.5* FED. 12S0 24 1250 6000 REMINGTON 209P “HI-SKOR” 700-X 20.5* FED. 12S0 24 1340 7300 REMINGTON 209P “HI-SKOR” 700-X 16.0* ACTIV TG-30 24 1145 4800 REMINGTON 209P “HI-SKOR” 700-X 17.5* ACTIV TG-30 24 1210 5500 REMINGTON 209P “HI-SKOR” 700-X 18.5* ACTIV TG-30 24 1250 6100 REMINGTON 209P “HI-SKOR” 700-X 20.0* ACTIV TG-30 24 1320 7000

WINCHESTER 209 “HI-SKOR” 700-X 15.5* WIN . WAA12SL 24 1150 5100 WINCHESTER 209 “HI-SKOR” 700-X 16.5* WIN . WAA12SL 24 1200 5700 WINCHESTER 209 “HI-SKOR” 700-X 17.5* WIN . WAA12SL 24 1250 6400 WINCHESTER 209 “HI-SKOR” 700-X 19.0* WIN . WAA12SL 24 1320 7500 WINCHESTER 209 “HI-SKOR” 700-X 16.0* CB. CB1100-12 24 1155 4900 WINCHESTER 209 “HI-SKOR” 700-X 17.0* CB. CB1100-12 24 1210 5500 WINCHESTER 209 “HI-SKOR” 700-X 18.0* CB. CB1100-12 24 1260 6200 WINCHESTER 209 “HI-SKOR” 700-X 19.5* CB. CB1100-12 24 1335 7300 WINCHESTER 209 “HI-SKOR” 700-X 15.5* REM . TGT12 24 1150 5200 WINCHESTER 209 “HI-SKOR” 700-X 16.5* REM . TGT12 24 1195 5800 WINCHESTER 209 “HI-SKOR” 700-X 17.5* REM . TGT12 24 1245 6400 WINCHESTER 209 “HI-SKOR” 700-X 19.5* REM . TGT12 24 1335 7800 WINCHESTER 209 “HI-SKOR” 700-X 16.0* CB. CB2100-12 24 1160 5300 WINCHESTER 209 “HI-SKOR” 700-X 17.0* CB. CB2100-12 24 1210 5900 WINCHESTER 209 “HI-SKOR” 700-X 18.0* CB. CB2100-12 24 1260 6500 WINCHESTER 209 “HI-SKOR” 700-X 19.5* CB. CB2100-12 24 1335 7400 WINCHESTER 209 “HI-SKOR” 700-X 15.5* FED. 12S0 24 1145 5400 WINCHESTER 209 “HI-SKOR” 700-X 16.5* FED. 12S0 24 1195 6100 WINCHESTER 209 “HI-SKOR” 700-X 17.5* FED. 12S0 24 1250 6700 WINCHESTER 209 “HI-SKOR” 700-X 19.5* FED. 12S0 24 1330 7800 WINCHESTER 209 “HI-SKOR” 700-X 15.5* ACTIV TG-30 24 1145 5600

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

WINCHESTER 209 “HI-SKOR” 700-X 16.5* ACTIV TG-30 24 1195 6300 WINCHESTER 209 “HI-SKOR” 700-X 17.5* ACTIV TG-30 24 1245 7000 WINCHESTER 209 “HI-SKOR” 700-X 19.5* ACTIV TG-30 24 1335 8400

NOTE - ALL DATA SHOWN IS FOR LEAD SHOT. DO NOT ATTEMPT TO LOAD WITH STEEL SHOT AS DANGEROUS LOADS MAY RESULT.

LEAD MUZZLE CHAMBER

12 GAUGE 23⁄4 INCH 24 GRAM LOADS (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (FT/SEC) (PSI)

SHELL: FEDERAL PLASTIC GOLD MEDAL, TOP GUN, MULTI PURPOSE Grams**

FEDERAL 209A PB 20.0* WIN. WAA12SL 24 1155 5000 FEDERAL 209A PB 21.0* WIN. WAA12SL 24 1195 5300 FEDERAL 209A PB 22.5* WIN. WAA12SL 24 1250 5900 FEDERAL 209A PB 24.5* WIN. WAA12SL 24 1325 6600 FEDERAL 209A PB 20.0* CB. CB2118-12 24 1150 4900 FEDERAL 209A PB 21.0* CB. CB2118-12 24 1190 5400 FEDERAL 209A PB 22.5* CB. CB2118-12 24 1250 6000 FEDERAL 209A PB 24.5* CB. CB2118-12 24 1330 6900 FEDERAL 209A PB 20.0* REM. TGT12 24 1145 4700 FEDERAL 209A PB 21.5* REM. TGT12 24 1205 5300 FEDERAL 209A PB 23.0* REM. TGT12 24 1265 6000 FEDERAL 209A PB 24.5* REM. TGT12 24 1325 6700 FEDERAL 209A PB 20.0* FED. 12S3 24 1155 5200 FEDERAL 209A PB 21.0* FED. 12S3 24 1195 5600 FEDERAL 209A PB 22.5* FED. 12S3 24 1260 6300 FEDERAL 209A PB 24.0* FED. 12S3 24 1320 7000 FEDERAL 209A PB 20.0* ACTIV TG-30 24 1145 5000 FEDERAL 209A PB 21.5* ACTIV TG-30 24 1205 5600 FEDERAL 209A PB 22.5* ACTIV TG-30 24 1250 6100 FEDERAL 209A PB 24.5* ACTIV TG-30 24 1330 7000

REMINGTON 209P PB 21.0* WIN. WAA12SL 24 1140 3900 REMINGTON 209P PB 22.5* WIN. WAA12SL 24 1195 4400 REMINGTON 209P PB 24.0* WIN. WAA12SL 24 1255 5100 REMINGTON 209P PB 25.5* WIN. WAA12SL 24 1320 5700 REMINGTON 209P PB 21.0* CB. CB2118-12 24 1150 4300 REMINGTON 209P PB 22.5* CB. CB2118-12 24 1205 4700 REMINGTON 209P PB 24.0* CB. CB2118-12 24 1265 5300 REMINGTON 209P PB 25.5* CB. CB2118-12 24 1330 6100 REMINGTON 209P PB 21.0* REM. TGT12 24 1145 3900 REMINGTON 209P PB 22.5* REM. TGT12 24 1200 4500 REMINGTON 209P PB 24.0* REM. TGT12 24 1265 5200 REMINGTON 209P PB 25.5* REM. TGT12 24 1330 6000 REMINGTON 209P PB 21.0* FED. 12S3 24 1160 4700 REMINGTON 209P PB 22.0* FED. 12S3 24 1205 5100 REMINGTON 209P PB 23.0* FED. 12S3 24 1250 5600 REMINGTON 209P PB 25.0* FED. 12S3 24 1330 6600 REMINGTON 209P PB 20.0* ACTIV TG-30 24 1140 4800 REMINGTON 209P PB 22.0* ACTIV TG-30 24 1205 5300 REMINGTON 209P PB 23.5* ACTIV TG-30 24 1260 5700 REMINGTON 209P PB 25.0* ACTIV TG-30 24 1325 6400

WINCHESTER 209 PB 20.5* WIN. WAA12SL 24 1145 4300 WINCHESTER 209 PB 21.5* WIN. WAA12SL 24 1190 4800 WINCHESTER 209 PB 23.0* WIN. WAA12SL 24 1255 5400 WINCHESTER 209 PB 25.0* WIN. WAA12SL 24 1335 6200 WINCHESTER 209 PB 20.5* CB. CB2118-12 24 1150 4800 WINCHESTER 209 PB 21.5* CB. CB2118-12 24 1195 5300 WINCHESTER 209 PB 23.0* CB. CB2118-12 24 1260 6000 WINCHESTER 209 PB 24.5* CB. CB2118-12 24 1320 6600 WINCHESTER 209 PB 20.5* REM. TGT12 24 1140 4500 WINCHESTER 209 PB 22.0* REM. TGT12 24 1200 5000 WINCHESTER 209 PB 23.5* REM. TGT12 24 1265 5700 WINCHESTER 209 PB 25.0* REM. TGT12 24 1325 6300 WINCHESTER 209 PB 20.5* FED. 12S3 24 1145 4800 WINCHESTER 209 PB 22.0* FED. 12S3 24 1205 5600 WINCHESTER 209 PB 23.0* FED. 12S3 24 1250 6100 WINCHESTER 209 PB 24.5* FED. 12S3 24 1320 6900 WINCHESTER 209 PB 20.5* ACTIV TG-30 24 1160 5100 WINCHESTER 209 PB 21.5* ACTIV TG-30 24 1200 5600 WINCHESTER 209 PB 22.5* ACTIV TG-30 24 1250 6100 WINCHESTER 209 PB 24.5* ACTIV TG-30 24 1325 6900

FEDERAL 209A SR7625 23.5* WIN. WAA12SL 24 1150 3800 FEDERAL 209A SR7625 24.5* WIN. WAA12SL 24 1190 4200 FEDERAL 209A SR7625 25.5 WIN. WAA12SL 24 1255 4800 FEDERAL 209A SR7625 27.0 WIN. WAA12SL 24 1320 5600 FEDERAL 209A SR7625 24.0 CB. CB2100-12 24 1145 3400 FEDERAL 209A SR7625 25.5 CB. CB2100-12 24 1205 3900

*INSERT ONE 20 GA 0.135 IN CARD IN BOTTOM OF SHOTCUP **24 GRAM LOADS ARE 370.4 GRAINS, 7/8 OZ. EQUALS 382.8 GRAINS. NOTE - ALL DATA SHOWN IS FOR LEAD SHOT. DO NOT ATTEMPT TO LOAD WITH STEEL SHOT AS DANGEROUS LOADS MAY RESULT.

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

Data shown were obtained under controlled conditions: to achieve the ballistic results as listed in this Guide, you must comply, exactly, with each and every listed condition that produced these results. In effect, these data as presented in the shotshell section are a "recipe," to be followed without deviation to achieve the stated ballistic level. The values shown may vary substantially if different component combinations and/or techniques are employed.

LEAD MUZZLE CHAMBER

12 GAUGE 23⁄4 INCH 24 GRAM LOADS (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (FT/SEC) (PSI)

SHELL: FEDERAL PLASTIC GOLD MEDAL, TOP GUN, MULTI PURPOSE Grams**

FEDERAL 209A SR7625 26.5 CB. CB2100-12 24 1250 4300 FEDERAL 209A SR7625 28.5 CB. CB2100-12 24 1325 5000 FEDERAL 209A SR7625 24.0 REM. TGT12 24 1155 3700 FEDERAL 209A SR7625 25.0 REM. TGT12 24 1195 4000 FEDERAL 209A SR7625 26.5 REM. TGT12 24 1255 4600 FEDERAL 209A SR7625 28.5 REM. TGT12 24 1335 5400 FEDERAL 209A SR7625 23.5 FED. 12S0 24 1145 3800 FEDERAL 209A SR7625 25.0 FED. 12S0 24 1205 4300 FEDERAL 209A SR7625 26.5 FED. 12S0 24 1265 4900 FEDERAL 209A SR7625 28.0 FED. 12S0 24 1320 5400 FEDERAL 209A SR7625 23.5* ACTIV TG-30 24 1155 4100 FEDERAL 209A SR7625 24.5* ACTIV TG-30 24 1200 4600 FEDERAL 209A SR7625 26.0* ACTIV TG-30 24 1260 5300 FEDERAL 209A SR7625 28.0* ACTIV TG-30 24 1335 5900

WINCHESTER 209 SR7625 24.5* WIN. WAA12SL 24 1145 3500 WINCHESTER 209 SR7625 25. 5 WIN. WAA12SL 2 4 1195 3800 WINCHESTER 209 SR7625 27. 0 WIN. WAA12SL 2 4 1265 4600 WINCHESTER 209 SR7625 28. 5 WIN. WAA12SL 2 4 1335 5400 WINCHESTER 209 SR7625 25. 0 CB. CB2100-12 24 1155 3300 WINCHESTER 209 SR7625 26. 0 CB. CB2100-12 24 1195 3600 WINCHESTER 209 SR7625 27. 5 CB. CB2100-12 24 1250 4000 WINCHESTER 209 SR7625 29. 5 CB. CB2100-12 24 1322 4600 WINCHESTER 209 SR7625 24. 5 REM. TG T 1 2 24 1150 3500 WINCHESTER 209 SR7625 25. 5 REM. TG T 1 2 24 1195 3700 WINCHESTER 209 SR7625 27. 0 REM. TG T 1 2 24 1250 4200 WINCHESTER 209 SR7625 29. 0 REM. TG T 1 2 24 1330 4900 WINCHESTER 209 SR7625 24. 5 FED. 12S0 24 1155 3700 WINCHESTER 209 SR7625 25. 5 FED. 12S0 24 1200 4000 WINCHESTER 209 SR7625 27. 0 FED. 12S0 24 1255 4500 WINCHESTER 209 SR7625 29. 0 FED. 12S0 24 1330 5200 WINCHESTER 209 SR7625 23 .5* ACTIV TG-30 24 1140 3900 WINCHESTER 209 SR7625 25 .0* ACTIV TG-30 24 1200 4400 WINCHESTER 209 SR7625 26 .5* ACTIV TG-30 24 1260 5000

WINCHESTER 209 SR7625 28 .0* ACTIV TG-30 24 1320 5600

LEAD MUZZLE CHAMBER

SHELL: REMINGTON PREMIER, RTL, STS, NITRO 27 Grams**

FEDERAL 209A “HI-SKOR” 700-X 14.5* WIN . WAA12SL 24 1140 6500 FEDERAL 209A “HI-SKOR” 700-X 15.5* WIN . WAA12SL 24 1195 7300 FEDERAL 209A “HI-SKOR” 700-X 16.5* WIN . WAA12SL 24 1245 8200 FEDERAL 209A “HI-SKOR” 700-X 18.5* WIN . WAA12SL 24 1335 10000 FEDERAL 209A “HI-SKOR” 700-X 15.0* CB. CB1100-12 24 1155 5900 FEDERAL 209A “HI-SKOR” 700-X 16.0* CB. CB1100-12 24 1205 6700 FEDERAL 209A “HI-SKOR” 700-X 17.0* CB. CB1100-12 24 1255 7600 FEDERAL 209A “HI-SKOR” 700-X 18.5* CB. CB1100-12 24 1330 8900 FEDERAL 209A “HI-SKOR” 700-X 15.0* REM. TGT12 24 1160 6500 FEDERAL 209A “HI-SKOR” 700-X 16.0* REM. TGT12 24 1210 7400 FEDERAL 209A “HI-SKOR” 700-X 17.0* REM. TGT12 24 1265 8300 FEDERAL 209A “HI-SKOR” 700-X 18.5* REM. TGT12 24 1335 9600 FEDERAL 209A “HI-SKOR” 700-X 15.0 CB. CB2100-12 24 1155 6100 FEDERAL 209A “HI-SKOR” 700-X 16.0 CB. CB2100-12 24 1210 6800 FEDERAL 209A “HI-SKOR” 700-X 17.0 CB. CB2100-12 24 1260 7600 FEDERAL 209A “HI-SKOR” 700-X 18.5 CB. CB2100-12 24 1325 8600 FEDERAL 209A “HI-SKOR” 700-X 15.0 FED. 12S0 24 1160 6600 FEDERAL 209A “HI-SKOR” 700-X 16.0 FED. 12S0 24 1210 7400 FEDERAL 209A “HI-SKOR” 700-X 17.0 FED. 12S0 24 1260 8100 FEDERAL 209A “HI-SKOR” 700-X 18.5 FED. 12S0 24 1325 9200 FEDERAL 209A “HI-SKOR” 700-X 14.5 ACTIV TG-30 24 1155 6900 FEDERAL 209A “HI-SKOR” 700-X 15.5 ACTIV TG-30 24 1200 7600 FEDERAL 209A “HI-SKOR” 700-X 16.5 ACTIV TG-30 24 1250 8300 FEDERAL 209A “HI-SKOR” 700-X 18.0 ACTIV TG-30 24 1320 9600

REMINGTON 209P “HI-SKOR” 700-X 15.0* WIN . WAA12SL 24 1155 6400 REMINGTON 209P “HI-SKOR” 700-X 16.0* WIN . WAA12SL 24 1210 7200 REMINGTON 209P “HI-SKOR” 700-X 17.0* WIN . WAA12SL 24 1255 7900 REMINGTON 209P “HI-SKOR” 700-X 18.5* WIN . WAA12SL 24 1320 8900 REMINGTON 209P “HI-SKOR” 700-X 15.5* CB. CB1100-12 24 1155 5500 REMINGTON 209P “HI-SKOR” 700-X 16.5* CB. CB1100-12 24 1210 6400 REMINGTON 209P “HI-SKOR” 700-X 17.5* CB. CB1100-12 24 1260 7200 REMINGTON 209P “HI-SKOR” 700-X 19.0* CB. CB1100-12 24 1335 8400 REMINGTON 209P “HI-SKOR” 700-X 15.0* REM. TGT12 24 1150 5800 REMINGTON 209P “HI-SKOR” 700-X 16.0* REM. TGT12 24 1200 6600

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

REMINGTON 209P “HI-SKOR” 700-X 17.0* REM. TGT12 24 1250 7300 REMINGTON 209P “HI-SKOR” 700-X 19.0* REM. TGT12 24 1335 8700 REMINGTON 209P “HI-SKOR” 700-X 15.0 CB. CB2100-12 24 1150 5700

NOTE - ALL DATA SHOWN IS FOR LEAD SHOT. DO NOT ATTEMPT TO LOAD WITH STEEL SHOT AS DANGEROUS LOADS MAY RESULT.

12 GAUGE 23⁄4 INCH 24 GRAM LOADS (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (FT/SEC) (PSI)

SHELL: REMINGTON PREMIER, RTL, STS, NITRO 27 Grams**

REMINGTON 209P “HI-SKOR” 700-X 16.0 CB. CB2100-12 24 1200 6600 REMINGTON 209P “HI-SKOR” 700-X 17.0 CB. CB2100-12 24 1250 7400 REMINGTON 209P “HI-SKOR” 700-X 18.5 CB. CB2100-12 24 1330 8600 REMINGTON 209P “HI-SKOR” 700-X 15.0 FED. 12S0 24 1150 6100 REMINGTON 209P “HI-SKOR” 700-X 16.0 FED. 12S0 24 1205 7200 REMINGTON 209P “HI-SKOR” 700-X 17.0 FED. 12S0 24 1260 8200 REMINGTON 209P “HI-SKOR” 700-X 18.5 FED. 12S0 24 1340 9800 REMINGTON 209P “HI-SKOR” 700-X 15.0 ACTIV TG-30 24 1155 6400 REMINGTON 209P “HI-SKOR” 700-X 16.0 ACTIV TG-30 24 1210 7300 REMINGTON 209P “HI-SKOR” 700-X 17.0 ACTIV TG-30 24 1260 8200 REMINGTON 209P “HI-SKOR” 700-X 18.5 ACTIV TG-30 24 1330 9300

WINCHESTER 209 “HI-SKOR” 700-X 15.0* WIN . WAA12SL 24 1160 6700 WINCHESTER 209 “HI-SKOR” 700-X 16.0* WIN . WAA12SL 24 1210 7600 WINCHESTER 209 “HI-SKOR” 700-X 17.0* WIN . WAA12SL 24 1260 8400 WINCHESTER 209 “HI-SKOR” 700-X 18.5* WIN . WAA12SL 24 1335 9700 WINCHESTER 209 “HI-SKOR” 700-X 15.0 CB. CB1100-12 24 1140 5300 WINCHESTER 209 “HI-SKOR” 700-X 16.0 CB. CB1100-12 24 1200 6300 WINCHESTER 209 “HI-SKOR” 700-X 17.0 CB. CB1100-12 24 1250 7200 WINCHESTER 209 “HI-SKOR” 700-X 18.5 CB. CB1100-12 24 1325 8500 WINCHESTER 209 “HI-SKOR” 700-X 15.0* REM . TGT12 24 1155 6300 WINCHESTER 209 “HI-SKOR” 700-X 16.0* REM . TGT12 24 1205 7200 WINCHESTER 209 “HI-SKOR” 700-X 17.0* REM . TGT12 24 1260 8000 WINCHESTER 209 “HI-SKOR” 700-X 18.5* REM . TGT12 24 1335 9200 WINCHESTER 209 “HI-SKOR” 700-X 15.0 CB. CB2100-12 24 1145 5700 WINCHESTER 209 “HI-SKOR” 700-X 16.0 CB. CB2100-12 24 1200 6400 WINCHESTER 209 “HI-SKOR” 700-X 17.0 CB. CB2100-12 24 1255 7200 WINCHESTER 209 “HI-SKOR” 700-X 18.5 CB. CB2100-12 24 1335 8500 WINCHESTER 209 “HI-SKOR” 700-X 15.0 FED. 12S0 24 1160 6300 WINCHESTER 209 “HI-SKOR” 700-X 16.0 FED. 12S0 24 1215 7200 WINCHESTER 209 “HI-SKOR” 700-X 17.0 FED. 12S0 24 1265 8100 WINCHESTER 209 “HI-SKOR” 700-X 18.5 FED. 12S0 24 1335 9400 WINCHESTER 209 “HI-SKOR” 700-X 14.5 ACTIV TG-30 24 1135 6200 WINCHESTER 209 “HI-SKOR” 700-X 15.5 ACTIV TG-30 24 1190 7100 WINCHESTER 209 “HI-SKOR” 700-X 17.0 ACTIV TG-30 24 1265 8500 WINCHESTER 209 “HI-SKOR” 700-X 18.5 ACTIV TG-30 24 1335 9700

FEDERAL 209A PB 17.5 WIN. WAA12SL 24 1155 6400 FEDERAL 209A PB 18.5 WIN. WAA12SL 24 1200 7100 FEDERAL 209A PB 20.0 WIN. WAA12SL 24 1265 8100 FEDERAL 209A PB 21.5 WIN. WAA12SL 24 1330 9000 FEDERAL 209A PB 18.0 CB. CB1100-12 24 1140 5100 FEDERAL 209A PB 19.5 CB. CB1100-12 24 1205 6100 FEDERAL 209A PB 20.5 CB. CB1100-12 24 1250 6800 FEDERAL 209A PB 22.5 CB. CB1100-12 24 1330 7800 FEDERAL 209A PB 18.0 REM. TGT12 24 1145 5500 FEDERAL 209A PB 19.5 REM. TGT12 24 1205 6300 FEDERAL 209A PB 20.5 REM. TGT12 24 1250 6700 FEDERAL 209A PB 22.5 REM. TGT12 24 1330 7800 FEDERAL 209A PB 18.0 FED. 12S0 24 1155 6300 FEDERAL 209A PB 19.0 FED. 12S0 24 1195 6900 FEDERAL 209A PB 20.5 FED. 12S0 24 1255 7800 FEDERAL 209A PB 22.0 FED. 12S0 24 1320 8700 FEDERAL 209A PB 18.5 ACTIV TG-30 24 1150 5800 FEDERAL 209A PB 19.5 ACTIV TG-30 24 1190 6300 FEDERAL 209A PB 21.0 ACTIV TG-30 24 1255 7100 FEDERAL 209A PB 22.5 ACTIV TG-30 24 1320 8000

REMINGTON 209P PB 18.5 WIN. WAA12SL 24 1145 5400 REMINGTON 209P PB 19.5 WIN. WAA12SL 24 1195 6200 REMINGTON 209P PB 21.0 WIN. WAA12SL 24 1265 7300 REMINGTON 209P PB 22.5 WIN. WAA12SL 24 1325 8000 REMINGTON 209P PB 19.5 CB. CB1100-12 24 1140 4300 REMINGTON 209P PB 21.0 CB. CB1100-12 24 1205 5100 REMINGTON 209P PB 22.0 CB. CB1100-12 24 1250 5600 REMINGTON 209P PB 24.0 CB. CB1100-12 24 1330 6400 REMINGTON 209P PB 19.5 REM. TGT12 24 1155 4800 REMINGTON 209P PB 20.5 REM. TGT12 24 1195 5200 REMINGTON 209P PB 22.0 REM. TGT12 24 1260 6000

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

LEAD MUZZLE CHAMBER

12 GAUGE 23⁄4 INCH 24 GRAM LOADS (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (FT/SEC) (PSI)

SHELL: REMINGTON PREMIER, RTL, STS, NITRO 27 Grams**

REMINGTON 209P PB 23.5 REM. TGT12 24 1325 6900 REMINGTON 209P PB 19.0 FED. 12S0 24 1145 5300 REMINGTON 209P PB 20.5 FED. 12S0 24 1210 6300 REMINGTON 209P PB 21.5 FED. 12S0 24 1255 6800 REMINGTON 209P PB 23.5 FED. 12S0 24 1335 7700 REMINGTON 209P PB 19.0 ACTIV TG-30 24 1140 5200 REMINGTON 209P PB 20.5 ACTIV TG-30 24 1210 6000 REMINGTON 209P PB 21.5 ACTIV TG-30 24 1255 6500 REMINGTON 209P PB 23.5 ACTIV TG-30 24 1335 7500

WINCHESTER 209 PB 18.0 WIN. WAA12SL 24 1140 5600 WINCHESTER 209 PB 19.5 WIN. WAA12SL 24 1200 6400 WINCHESTER 209 PB 20.5 WIN. WAA12SL 24 1245 7000 WINCHESTER 209 PB 22.5 WIN. WAA12SL 24 1330 8100 WINCHESTER 209 PB 19.0 CB. CB1100-12 24 1145 4700 WINCHESTER 209 PB 20.5 CB. CB1100-12 24 1205 5200 WINCHESTER 209 PB 21.5 CB. CB1100-12 24 1245 5600 WINCHESTER 209 PB 23.5 CB. CB1100-12 24 1330 6400 WINCHESTER 209 PB 19.0 REM. TGT12 24 1155 5200 WINCHESTER 209 PB 20.0 REM. TGT12 24 1200 5700 WINCHESTER 209 PB 21.0 REM. TGT12 24 1245 6200 WINCHESTER 209 PB 23.0 REM. TGT12 24 1330 7300 WINCHESTER 209 PB 19.0 FED. 12S0 24 1145 5400 WINCHESTER 209 PB 20.5 FED. 12S0 24 1210 6300 WINCHESTER 209 PB 21.5 FED. 12S0 24 1250 6800 WINCHESTER 209 PB 23.5 FED. 12S0 24 1335 7700 WINCHESTER 209 PB 19.0 ACTIV TG-30 24 1155 5700 WINCHESTER 209 PB 20.0 ACTIV TG-30 24 1190 6100 WINCHESTER 209 PB 21.5 ACTIV TG-30 24 1255 6900 WINCHESTER 209 PB 23.0 ACTIV TG-30 24 1325 7800

FEDERAL 209A SR7625 20.5 WIN. WAA12SL 24 1155 5700 FEDERAL 209A SR7625 21.5 WIN. WAA12SL 24 1195 6200 FEDERAL 209A SR7625 23.0 WIN. WAA12SL 24 1250 6800 FEDERAL 209A SR7625 25.0 WIN. WAA12SL 24 1320 7500 FEDERAL 209A SR7625 21.5 CB. CB1100-12 24 1150 4600 FEDERAL 209A SR7625 23.0 CB. CB1100-12 24 1210 5100 FEDERAL 209A SR7625 24.0 CB. CB1100-12 24 1250 5600 FEDERAL 209A SR7625 26.0 CB. CB1100-12 24 1330 6500 FEDERAL 209A SR7625 22.0* REM. FIG8 24 1150 4700 FEDERAL 209A SR7625 23.0* REM. FIG8 24 1195 5200 FEDERAL 209A SR7625 24.5* REM. FIG8 24 1260 6000 FEDERAL 209A SR7625 26.0* REM. FIG8 24 1320 6800 FEDERAL 209A SR7625 21.5 FED. 12S0 24 1155 5300 FEDERAL 209A SR7625 22.5 FED. 12S0 24 1200 5700 FEDERAL 209A SR7625 24.0 FED. 12S0 24 1260 6500 FEDERAL 209A SR7625 25.0 FED. 12S0 24 1325 7300 FEDERAL 209A SR7625 21.0 ACTIV TG-30 24 1140 5100 FEDERAL 209A SR7625 22.5 ACTIV TG-30 24 1200 5700 FEDERAL 209A SR7625 23.5 ACTIV TG-30 24 1245 6200 FEDERAL 209A SR7625 25.5 ACTIV TG-30 24 1325 7200

REMINGTON 209P SR7625 21.5 WIN. WAA12SL 24 1155 4800 REMINGTON 209P SR7625 23.0 WIN. WAA12SL 24 1205 5300 REMINGTON 209P SR7625 24.5 WIN. WAA12SL 24 1255 5800 REMINGTON 209P SR7625 26.0 WIN. WAA12SL 24 1325 6800 REMINGTON 209P SR7625 23.5 CB. CB1100-12 24 1145 3200 REMINGTON 209P SR7625 25.0 CB. CB1100-12 24 1205 3800 REMINGTON 209P SR7625 26.0 CB. CB1100-12 24 1250 4400 REMINGTON 209P SR7625 27.5 CB. CB1100-12 24 1320 5300 REMINGTON 209P SR7625 22.0* REM. FIG8 24 1140 4200 REMINGTON 209P SR7625 23.5* REM. FIG8 24 1205 4900 REMINGTON 209P SR7625 24.5* REM. FIG8 24 1245 5300 REMINGTON 209P SR7625 26.5* REM. FIG8 24 1325 6200 REMINGTON 209P SR7625 21.5 FED. 12S0 24 1155 4600 REMINGTON 209P SR7625 23.0 FED. 12S0 24 1210 5300 REMINGTON 209P SR7625 24.0 FED. 12S0 24 1250 5800 REMINGTON 209P SR7625 26.0 FED. 12S0 24 1335 6900 REMINGTON 209P SR7625 21.5 ACTIV TG-30 24 1155 4900 REMINGTON 209P SR7625 23.0 ACTIV TG-30 24 1210 5200 REMINGTON 209P SR7625 24.5 ACTIV TG-30 24 1260 5600 REMINGTON 209P SR7625 26.0 ACTIV TG-30 24 1320 6300

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

LEAD MUZZLE CHAMBER

12 GAUGE 23⁄4 INCH 24 GRAM LOADS (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (FT/SEC) (PSI)

SHELL: REMINGTON PREMIER, RTL, STS, NITRO 27 Grams**

WINCHESTER 209 SR7625 21. 0 WIN. WAA12SL 2 4 1160 5300 WINCHESTER 209 SR7625 22. 0 WIN. WAA12SL 2 4 1205 5900 WINCHESTER 209 SR7625 23. 0 WIN. WAA12SL 2 4 1250 6400 WINCHESTER 209 SR7625 24. 5 WIN. WAA12SL 2 4 1320 7300 WINCHESTER 209 SR7625 23. 0 CB. CB1100-12 24 1145 3800 WINCHESTER 209 SR7625 24. 5 CB. CB1100-12 24 1210 4400 WINCHESTER 209 SR7625 25. 5 CB. CB1100-12 24 1255 4900 WINCHESTER 209 SR7625 27. 0 CB. CB1100-12 24 1325 5700 WINCHESTER 209 SR7625 22.5* REM. FIG8 24 1160 4600 WINCHESTER 209 SR7625 23.5* REM. FIG8 24 1205 5100 WINCHESTER 209 SR7625 24.5* REM. FIG8 24 1245 5600 WINCHESTER 209 SR7625 26.5* REM. FIG8 24 1325 6500 WINCHESTER 209 SR7625 22. 5 FED. 12S0 24 1160 4800 WINCHESTER 209 SR7625 23. 5 FED. 12S0 24 1210 5300 WINCHESTER 209 SR7625 24. 5 FED. 12S0 24 1255 6000 WINCHESTER 209 SR7625 26. 0 FED. 12S0 24 1325 6900 WINCHESTER 209 SR7625 21.5 ACTIV TG-30 24 1145 5000 WINCHESTER 209 SR7625 23.0 ACTIV TG-30 24 1205 5600 WINCHESTER 209 SR7625 24.0 ACTIV TG-30 24 1250 6100 WINCHESTER 209 SR7625 25.5 ACTIV TG-30 24 1320 7000

SHELL: WINCHESTER AA Grams**

FEDERAL 209A “HI-SKOR” 700-X 14.5* WIN . WAA12SL 24 1145 6400 FEDERAL 209A “HI-SKOR” 700-X 15.5* WIN . WAA12SL 24 1195 7000 FEDERAL 209A “HI-SKOR” 700-X 17.0* WIN . WAA12SL 24 1260 8100 FEDERAL 209A “HI-SKOR” 700-X 18.5* WIN . WAA12SL 24 1320 9100 FEDERAL 209A “HI-SKOR” 700-X 14.5* CB. CB1100-12 24 1140 5700 FEDERAL 209A “HI-SKOR” 700-X 15.5* CB. CB1100-12 24 1190 6400 FEDERAL 209A “HI-SKOR” 700-X 17.0* CB. CB1100-12 24 1260 7400 FEDERAL 209A “HI-SKOR” 700-X 18.5* CB. CB1100-12 24 1325 8300 FEDERAL 209A “HI-SKOR” 700-X 14.5* REM. TGT12 24 1140 6000 FEDERAL 209A “HI-SKOR” 700-X 16.0* REM. TGT12 24 1210 7000 FEDERAL 209A “HI-SKOR” 700-X 17.0* REM. TGT12 24 1255 7800 FEDERAL 209A “HI-SKOR” 700-X 18.5* REM. TGT12 24 1320 8600 FEDERAL 209A “HI-SKOR” 700-X 15.0 CB. CB2100-12 24 1160 5900 FEDERAL 209A “HI-SKOR” 700-X 16.0 CB. CB2100-12 24 1210 6700 FEDERAL 209A “HI-SKOR” 700-X 17.0 CB. CB2100-12 24 1260 7500 FEDERAL 209A “HI-SKOR” 700-X 18.5 CB. CB2100-12 24 1325 8600 FEDERAL 209A “HI-SKOR” 700-X 15.0 FED. 12S0 24 1150 6400 FEDERAL 209A “HI-SKOR” 700-X 16.0 FED. 12S0 24 1200 7100 FEDERAL 209A “HI-SKOR” 700-X 17.0 FED. 12S0 24 1250 7900 FEDERAL 209A “HI-SKOR” 700-X 18.5 FED. 12S0 24 1325 9000 FEDERAL 209A “HI-SKOR” 700-X 15.0 ACTIV TG-30 24 1145 6000 FEDERAL 209A “HI-SKOR” 700-X 16.0 ACTIV TG-30 24 1205 7100 FEDERAL 209A “HI-SKOR” 700-X 17.0 ACTIV TG-30 24 1255 8000 FEDERAL 209A “HI-SKOR” 700-X 18.5 ACTIV TG-30 24 1320 9100

REMINGTON 209P “HI-SKOR” 700-X 15.0* WIN . WAA12SL 24 1140 5300 REMINGTON 209P “HI-SKOR” 700-X 16.5* WIN . WAA12SL 24 1200 6000 REMINGTON 209P “HI-SKOR” 700-X 18.0* WIN . WAA12SL 24 1265 6800 REMINGTON 209P “HI-SKOR” 700-X 19.5* WIN . WAA12SL 24 1330 7600 REMINGTON 209P “HI-SKOR” 700-X 16.0* CB. CB1100-12 24 1145 4100 REMINGTON 209P “HI-SKOR” 700-X 17.5* CB. CB1100-12 24 1200 4800 REMINGTON 209P “HI-SKOR” 700-X 19.0* CB. CB1100-12 24 1265 5500 REMINGTON 209P “HI-SKOR” 700-X 20.5* CB. CB1100-12 24 1335 6400 REMINGTON 209P “HI-SKOR” 700-X 15.5* REM. TGT12 24 1150 5000 REMINGTON 209P “HI-SKOR” 700-X 16.5* REM. TGT12 24 1190 5500 REMINGTON 209P “HI-SKOR” 700-X 18.0* REM. TGT12 24 1250 6100 REMINGTON 209P “HI-SKOR” 700-X 20.5* REM. TGT12 24 1325 6800 REMINGTON 209P “HI-SKOR” 700-X 15.0 CB. CB2100-12 24 1140 4800 REMINGTON 209P “HI-SKOR” 700-X 16.5 CB. CB2100-12 24 1200 5200 REMINGTON 209P “HI-SKOR” 700-X 18.0 CB. CB2100-12 24 1255 5600 REMINGTON 209P “HI-SKOR” 700-X 20.0 CB. CB2100-12 24 1325 6300 REMINGTON 209P “HI-SKOR” 700-X 15.0 FED. 12S0 24 1150 5000 REMINGTON 209P “HI-SKOR” 700-X 16.5 FED. 12S0 24 1190 5600 REMINGTON 209P “HI-SKOR” 700-X 18.0 FED. 12S0 24 1250 6300 REMINGTON 209P “HI-SKOR” 700-X 19.5 FED. 12S0 24 1320 7600 REMINGTON 209P “HI-SKOR” 700-X 15.5 ACTIV TG-30 24 1145 5400 REMINGTON 209P “HI-SKOR” 700-X 16.5 ACTIV TG-30 24 1200 6100 REMINGTON 209P “HI-SKOR” 700-X 18.0 ACTIV TG-30 24 1255 6700 REMINGTON 209P “HI-SKOR” 700-X 20.0 ACTIV TG-30 24 1330 7500

NOTE - ALL DATA SHOWN IS FOR LEAD SHOT. DO NOT ATTEMPT TO LOAD WITH STEEL SHOT AS DANGEROUS LOADS MAY RESULT.

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

LEAD MUZZLE CHAMBER

12 GAUGE 23⁄4 INCH 24 GRAM LOADS (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (FT/SEC) (PSI)

SHELL: WINCHESTER AA Grams**

WINCHESTER 209 “HI-SKOR” 700-X 14.5* WIN . WAA12SL 24 1140 6300 WINCHESTER 209 “HI-SKOR” 700-X 15.5* WIN . WAA12SL 24 1190 7100 WINCHESTER 209 “HI-SKOR” 700-X 17.0* WIN . WAA12SL 24 1260 8200 WINCHESTER 209 “HI-SKOR” 700-X 18.5* WIN . WAA12SL 24 1325 9100 WINCHESTER 209 “HI-SKOR” 700-X 14.5* CB. CB1100-12 24 1135 5600 WINCHESTER 209 “HI-SKOR” 700-X 15.5* CB. CB1100-12 24 1190 6300 WINCHESTER 209 “HI-SKOR” 700-X 17.0* CB. CB1100-12 24 1260 7300 WINCHESTER 209 “HI-SKOR” 700-X 18.5* CB. CB1100-12 24 1325 8400 WINCHESTER 209 “HI-SKOR” 700-X 14.5* REM . TGT12 24 1140 6000 WINCHESTER 209 “HI-SKOR” 700-X 16.0* REM . TGT12 24 1205 6900 WINCHESTER 209 “HI-SKOR” 700-X 17.0* REM . TGT12 24 1250 7600 WINCHESTER 209 “HI-SKOR” 700-X 18.5* REM . TGT12 24 1320 8700 WINCHESTER 209 “HI-SKOR” 700-X 15.0 CB. CB2100-12 24 1140 5400 WINCHESTER 209 “HI-SKOR” 700-X 16.0 CB. CB2100-12 24 1195 6400 WINCHESTER 209 “HI-SKOR” 700-X 17.0 CB. CB2100-12 24 1250 7200 WINCHESTER 209 “HI-SKOR” 700-X 18.5 CB. CB2100-12 24 1320 8600 WINCHESTER 209 “HI-SKOR” 700-X 14.5 FED. 12S0 24 1145 6600 WINCHESTER 209 “HI-SKOR” 700-X 15.5 FED. 12S0 24 1195 7300 WINCHESTER 209 “HI-SKOR” 700-X 17.0 FED. 12S0 24 1265 8300 WINCHESTER 209 “HI-SKOR” 700-X 18.5 FED. 12S0 24 1325 9300 WINCHESTER 209 “HI-SKOR” 700-X 15.0 ACTIV TG-30 24 1150 6200 WINCHESTER 209 “HI-SKOR” 700-X 16.0 ACTIV TG-30 24 1205 7200 WINCHESTER 209 “HI-SKOR” 700-X 17.0 ACTIV TG-30 24 1255 7900 WINCHESTER 209 “HI-SKOR” 700-X 18.5 ACTIV TG-30 24 1320 8900

FEDERAL 209A PB 18.0 WIN. WAA12SL 24 1160 5800 FEDERAL 209A PB 19.0 WIN. WAA12SL 24 1195 6200 FEDERAL 209A PB 20.5 WIN. WAA12SL 24 1255 6900 FEDERAL 209A PB 22.5 WIN. WAA12SL 24 1330 7800 FEDERAL 209A PB 18.5 CB. CB1100-12 24 1155 4900 FEDERAL 209A PB 20.0 CB. CB1100-12 24 1205 5300 FEDERAL 209A PB 21.0 CB. CB1100-12 24 1245 5600 FEDERAL 209A PB 23.0 CB. CB1100-12 24 1320 6600 FEDERAL 209A PB 18.0* REM. FIG8 24 1145 5200 FEDERAL 209A PB 19.5* REM. FIG8 24 1200 5800 FEDERAL 209A PB 21.0* REM. FIG8 24 1255 6500 FEDERAL 209A PB 23.0* REM. FIG8 24 1325 7200 FEDERAL 209A PB 18.5 FED. 12S0 24 1150 5500 FEDERAL 209A PB 19.5 FED. 12S0 24 1190 6000 FEDERAL 209A PB 21.0 FED. 12S0 24 1250 6600 FEDERAL 209A PB 23.0 FED. 12S0 24 1330 7900 FEDERAL 209A PB 18.5 ACTIV TG-30 24 1140 5100 FEDERAL 209A PB 20.0 ACTIV TG-30 24 1205 6000 FEDERAL 209A PB 21.0 ACTIV TG-30 24 1255 6700 FEDERAL 209A PB 23.0 ACTIV TG-30 24 1330 7700

REMINGTON 209P PB 18.5 WIN. WINAA12SL 24 1140 4800 REMINGTON 209P PB 20.0 WIN. WINAA12SL 24 1195 5400 REMINGTON 209P PB 21.5 WIN. WINAA12SL 24 1255 6100 REMINGTON 209P PB 23.5 WIN. WINAA12SL 24 1335 7200 REMINGTON 209P PB 19.5 CB. CB1100-12 24 1155 4200 REMINGTON 209P PB 20.5 CB. CB1100-12 24 1195 4500 REMINGTON 209P PB 22.0 CB. CB1100-12 24 1250 5000 REMINGTON 209P PB 24.5 CB. CB1100-12 24 1330 5700 REMINGTON 209P PB 19.5* REM. FIG8 24 1150 4500 REMINGTON 209P PB 20.5* REM. FIG8 24 1190 5000 REMINGTON 209P PB 22.0* REM. FIG8 24 1255 5800 REMINGTON 209P PB 23.5* REM. FIG8 24 1320 6700 REMINGTON 209P PB 19.5 FED. 12S0 24 1155 4900 REMINGTON 209P PB 20.5 FED. 12S0 24 1200 5400 REMINGTON 209P PB 22.0 FED. 12S0 24 1255 6100 REMINGTON 209P PB 24.0 FED. 12S0 24 1325 6800 REMINGTON 209P PB 19.5 ACTIV TG-30 24 1150 4700 REMINGTON 209P PB 20.5 ACTIV TG-30 24 1190 5100 REMINGTON 209P PB 22.0 ACTIV TG-30 24 1255 5800 REMINGTON 209P PB 23.5 ACTIV TG-30 24 1320 6500

WINCHESTER 209 PB 18.0 WIN. WAA12SL 24 1145 5500 WINCHESTER 209 PB 19.5 WIN. WAA12SL 24 1200 6000 WINCHESTER 209 PB 21.0 WIN. WAA12SL 24 1260 6500 WINCHESTER 209 PB 22.5 WIN. WAA12SL 24 1325 7500 WINCHESTER 209 PB 19.0 CB. CB1100-12 24 1155 4500 WINCHESTER 209 PB 20.5 CB. CB1100-12 24 1205 5000

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

WINCHESTER 209 PB 22.0 CB. CB1100-12 24 1260 5600 WINCHESTER 209 PB 23.5 CB. CB1100-12 24 1325 6300

NOTE - ALL DATA SHOWN IS FOR LEAD SHOT. DO NOT ATTEMPT TO LOAD WITH STEEL SHOT AS DANGEROUS LOADS MAY RESULT.

LEAD MUZZLE CHAMBER

12 GAUGE 23⁄4 INCH 24 GRAM LOADS (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (FT/SEC) (PSI)

SHELL: WINCHESTER AA Grams**

WINCHESTER 209 PB 19.0* REM. FIG8 24 1145 4900 WINCHESTER 209 PB 20.5* REM. FIG8 24 1200 5400 WINCHESTER 209 PB 22.0* REM. FIG8 24 1255 6100 WINCHESTER 209 PB 23.5* REM. FIG8 24 1320 6800 WINCHESTER 209 PB 19.0 FED. 12S0 24 1155 5200 WINCHESTER 209 PB 20.0 FED. 12S0 24 1195 5800 WINCHESTER 209 PB 21.5 FED. 12S0 24 1260 6600 WINCHESTER 209 PB 23.0 FED. 12S0 24 1325 7500 WINCHESTER 209 PB 19.0 ACTIV TG-30 24 1135 4900 WINCHESTER 209 PB 20.5 ACTIV TG-30 24 1205 5700 WINCHESTER 209 PB 21.5 ACTIV TG-30 24 1250 6300 WINCHESTER 209 PB 23.5 ACTIV TG-30 24 1330 7300

FEDERAL 209A SR7625 21.0 WIN. WAA12SL 24 1150 4600 FEDERAL 209A SR7625 22.5 WIN. WAA12SL 24 1200 5000 FEDERAL 209A SR7625 24.0 WIN. WAA12SL 24 1250 5400 FEDERAL 209A SR7625 26.0 WIN. WAA12SL 24 1330 6400 FEDERAL 209A SR7625 22.5 CB. CB1100-12 24 1155 3700 FEDERAL 209A SR7625 23.5 CB. CB1100-12 24 1195 4000 FEDERAL 209A SR7625 25.0 CB. CB1100-12 24 1250 4600 FEDERAL 209A SR7625 27.0 CB. CB1100-12 24 1335 5500 FEDERAL 209A SR7625 22.0* REM. FIG8 24 1150 4200 FEDERAL 209A SR7625 23.0* REM. FIG8 24 1195 4700 FEDERAL 209A SR7625 24.5* REM. FIG8 24 1255 5300 FEDERAL 209A SR7625 26.5* REM. FIG8 24 1330 6200 FEDERAL 209A SR7625 22.0 FED. 12S0 24 1150 4400 FEDERAL 209A SR7625 23.0 FED. 12S0 24 1195 4800 FEDERAL 209A SR7625 24.5 FED. 12S0 24 1255 5400 FEDERAL 209A SR7625 26.0 FED. 12S0 24 1320 6400 FEDERAL 209A SR7625 21.5 ACTIV TG-30 24 1145 4200 FEDERAL 209A SR7625 23.0 ACTIV TG-30 24 1205 4900 FEDERAL 209A SR7625 24.0 ACTIV TG-30 24 1250 5400 FEDERAL 209A SR7625 26.0 ACTIV TG-30 24 1325 6400

REMINGTON 209P SR7625 22.5 WIN. WAA12SL 24 1150 3700 REMINGTON 209P SR7625 24.0 WIN. WAA12SL 24 1210 4400 REMINGTON 209P SR7625 25.0 WIN. WAA12SL 24 1250 4800 REMINGTON 209P SR7625 27.0 WIN. WAA12SL 24 1320 5500 REMINGTON 209P SR7625 23.5 CB. CB1100-12 24 1145 3000 REMINGTON 209P SR7625 25.0 CB. CB1100-12 24 1205 3500 REMINGTON 209P SR7625 26.5 CB. CB1100-12 24 1265 4100 REMINGTON 209P SR7625 28.0 CB. CB1100-12 24 1330 4700 REMINGTON 209P SR7625 23.0* REM. FIG8 24 1150 3700 REMINGTON 209P SR7625 24.0* REM. FIG8 24 1195 4200 REMINGTON 209P SR7625 25.5* REM. FIG8 24 1255 4800 REMINGTON 209P SR7625 27.5* REM. FIG8 24 1335 5700 REMINGTON 209P SR7625 22.5 FED. 12S0 24 1140 4000 REMINGTON 209P SR7625 24.0 FED. 12S0 24 1190 4400 REMINGTON 209P SR7625 25.5 FED. 12S0 24 1250 5200 REMINGTON 209P SR7625 27.0 FED. 12S0 24 1320 6000 REMINGTON 209P SR7625 22.5 ACTIV TG-30 24 1150 3900 REMINGTON 209P SR7625 23.5 ACTIV TG-30 24 1195 4400 REMINGTON 209P SR7625 25.0 ACTIV TG-30 24 1250 4900 REMINGTON 209P SR7625 27.5 ACTIV TG-30 24 1325 5600

WINCHESTER 209 SR7625 22. 5 WIN. WAA12SL 2 4 1150 4200 WINCHESTER 209 SR7625 23. 5 WIN. WAA12SL 2 4 1195 4700 WINCHESTER 209 SR7625 25. 0 WIN. WAA12SL 2 4 1255 5300 WINCHESTER 209 SR7625 27. 0 WIN. WAA12SL 2 4 1330 6000 WINCHESTER 209 SR7625 23. 5 CB. CB1100-12 24 1150 3500 WINCHESTER 209 SR7625 24. 5 CB. CB1100-12 24 1190 3700 WINCHESTER 209 SR7625 26. 0 CB. CB1100-12 24 1250 4300 WINCHESTER 209 SR7625 28. 0 CB. CB1100-12 24 1330 5000 WINCHESTER 209 SR7625 22.0* REM. FIG8 24 1155 4300 WINCHESTER 209 SR7625 23.0* REM. FIG8 24 1190 4600 WINCHESTER 209 SR7625 24.5* REM. FIG8 24 1245 5100 WINCHESTER 209 SR7625 26.5* REM. FIG8 24 1320 5900 WINCHESTER 209 SR7625 22. 0 FED. 12S0 24 1140 4100 WINCHESTER 209 SR7625 23. 5 FED. 12S0 24 1195 4700 WINCHESTER 209 SR7625 25. 0 FED. 12S0 24 1255 5300 WINCHESTER 209 SR7625 27. 0 FED. 12S0 24 1335 6200 WINCHESTER 209 SR7625 22.0 ACTIV TG-30 24 1140 4200 WINCHESTER 209 SR7625 23.5 ACTIV TG-30 24 1200 4900

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

WINCHESTER 209 SR7625 25.0 ACTIV TG-30 24 1255 5500 WINCHESTER 209 SR7625 27.0 ACTIV TG-30 24 1335 6300

LEAD MUZZLE CHAMBER

*INSERT ONE 20 GA 0.135 IN CARD IN BOTTOM OF SHOTCUP ** 24 GRAM LOADS ARE 370.4 GRAINS, 7/8 OZ. EQUALS 382.8 GRAINS

12 GAUGE 23⁄4 INCH 1 OUNCE LOADS

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: FEDERAL PLASTIC GOLD MEDAL, TOP GUN, MULTI PURPOSE

FEDERAL 209A “HI-SKOR” 700-X 15.0* WIN . WAA12SL 1 1100 6000 FEDERAL 209A “HI-SKOR” 700-X 16.0* WIN . WAA12SL 1 1150 6900 FEDERAL 209A “HI-SKOR” 700-X 17.0* WIN . WAA12SL 1 1195 7600 FEDERAL 209A “HI-SKOR” 700-X 18.5* WIN . WAA12SL 1 1250 8500 FEDERAL 209A “HI-SKOR” 700-X 15.0 CB. CB2100-12 1 1110 6000 FEDERAL 209A “HI-SKOR” 700-X 16.0 CB. CB2100-12 1 1155 6700 FEDERAL 209A “HI-SKOR” 700-X 17.0 CB. CB2100-12 1 1200 7300 FEDERAL 209A “HI-SKOR” 700-X 18.0 CB. CB2100-12 1 1245 7900 FEDERAL 209A “HI-SKOR” 700-X 15.0* REM. TGT12 1 1100 5900 FEDERAL 209A “HI-SKOR” 700-X 16.0* REM. TGT12 1 1145 6500 FEDERAL 209A “HI-SKOR” 700-X 17.0* REM. TGT12 1 1190 7100 FEDERAL 209A “HI-SKOR” 700-X 18.5* REM. TGT12 1 1255 8100 FEDERAL 209A “HI-SKOR” 700-X 15.0 FED. 12S0 1 1110 6100 FEDERAL 209A “HI-SKOR” 700-X 16.0 FED. 12S0 1 1155 6700 FEDERAL 209A “HI-SKOR” 700-X 17.0 FED. 12S0 1 1195 7300 FEDERAL 209A “HI-SKOR” 700-X 18.5 FED. 12S0 1 1250 8200

REMINGTON 209P “HI-SKOR” 700-X 15.5* WIN . WAA12SL 1 1090 5800 REMINGTON 209P “HI-SKOR” 700-X 16.5* WIN . WAA12SL 1 1150 6600 REMINGTON 209P “HI-SKOR” 700-X 17.5* WIN . WAA12SL 1 1195 7300 REMINGTON 209P “HI-SKOR” 700-X 19.0* WIN . WAA12SL 1 1260 8400 REMINGTON 209P “HI-SKOR” 700-X 15.5 CB. CB2100-12 1 1095 5300 REMINGTON 209P “HI-SKOR” 700-X 16.5 CB. CB2100-12 1 1145 5800 REMINGTON 209P “HI-SKOR” 700-X 18.0 CB. CB2100-12 1 1200 6600 REMINGTON 209P “HI-SKOR” 700-X 19.5 CB. CB2100-12 1 1255 7400 REMINGTON 209P “HI-SKOR” 700-X 16.0* REM. TGT12 1 1110 5700 REMINGTON 209P “HI-SKOR” 700-X 17.0* REM. TGT12 1 1155 6200 REMINGTON 209P “HI-SKOR” 700-X 18.0* REM. TGT12 1 1195 6600 REMINGTON 209P “HI-SKOR” 700-X 19.5* REM. TGT12 1 1255 7300 REMINGTON 209P “HI-SKOR” 700-X 15.0 FED. 12S0 1 1110 5700 REMINGTON 209P “HI-SKOR” 700-X 16.0 FED. 12S0 1 1145 6300 REMINGTON 209P “HI-SKOR” 700-X 18.0 FED. 12S0 1 1210 7300 REMINGTON 209P “HI-SKOR” 700-X 19.5 FED. 12S0 1 1250 8000

WINCHESTER 209 “HI-SKOR” 700-X 15.5* WIN . WAA12SL 1 1105 6000 WINCHESTER 209 “HI-SKOR” 700-X 16.5* WIN . WAA12SL 1 1150 6700 WINCHESTER 209 “HI-SKOR” 700-X 17.5* WIN . WAA12SL 1 1200 7600 WINCHESTER 209 “HI-SKOR” 700-X 18.5* WIN . WAA12SL 1 1250 8500 WINCHESTER 209 “HI-SKOR” 700-X 15.5 CB. CB2100-12 1 1110 5700 WINCHESTER 209 “HI-SKOR” 700-X 16.5 CB. CB2100-12 1 1160 6400 WINCHESTER 209 “HI-SKOR” 700-X 17.5 CB. CB2100-12 1 1200 7000 WINCHESTER 209 “HI-SKOR” 700-X 19.0 CB. CB2100-12 1 1260 8100 WINCHESTER 209 “HI-SKOR” 700-X 15.5* REM . TGT12 1 1100 5900 WINCHESTER 209 “HI-SKOR” 700-X 16.5* REM . TGT12 1 1145 6600 WINCHESTER 209 “HI-SKOR” 700-X 17.5* REM . TGT12 1 1195 7200 WINCHESTER 209 “HI-SKOR” 700-X 18.5* REM . TGT12 1 1245 7800 WINCHESTER 209 “HI-SKOR” 700-X 15.5 FED. 12S0 1 1105 5900 WINCHESTER 209 “HI-SKOR” 700-X 16.5 FED. 12S0 1 1155 6700 WINCHESTER 209 “HI-SKOR” 700-X 17.5 FED. 12S0 1 1200 7300 WINCHESTER 209 “HI-SKOR” 700-X 18.5 FED. 12S0 1 1245 7800

FEDERAL 209A PB 18.0 WIN. WAA12SL 1 1110 6000 FEDERAL 209A PB 19.5 WIN. WAA12SL 1 1155 6600 FEDERAL 209A PB 21.0 WIN. WAA12SL 1 1205 7100 FEDERAL 209A PB 22.5 WIN. WAA12SL 1 1255 7600 FEDERAL 209A PB 20.0 CB. CB1100-12 1 1100 4600 FEDERAL 209A PB 21.5 CB. CB1100-12 1 1150 5100 FEDERAL 209A PB 23.0 CB. CB1100-12 1 1205 5700 FEDERAL 209A PB 24.0 CB. CB1100-12 1 1255 6300 FEDERAL 209A PB 19.5 REM. TGT12 1 1105 5100 FEDERAL 209A PB 20.5 REM. TGT12 1 1140 5500 FEDERAL 209A PB 22.0 REM. TGT12 1 1195 6200 FEDERAL 209A PB 24.0 REM. TGT12 1 1260 6800 FEDERAL 209A PB 19.5 FED. 12S3 1 1105 5400 FEDERAL 209A PB 20.5 FED. 12S3 1 1145 5900 FEDERAL 209A PB 22.0 FED. 12S3 1 1210 6700 FEDERAL 209A PB 23.0 FED. 12S3 1 1260 7100

REMINGTON 209P PB 20.0 WIN. WAA12SL 1 1095 4700 REMINGTON 209P PB 21.5 WIN. WAA12SL 1 1155 5300 REMINGTON 209P PB 22.5 WIN. WAA12SL 1 1195 5800 REMINGTON 209P PB 24.0 WIN. WAA12SL 1 1260 6600 REMINGTON 209P PB 21.0 CB. CB1100-12 1 1095 3800

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

REMINGTON 209P PB 22.0 CB. CB1100-12 1 1140 4300 REMINGTON 209P PB 23.5 CB. CB1100-12 1 1200 5000 REMINGTON 209P PB 25.0 CB. CB1100-12 1 1255 5600

*INSERT ONE 20 GA 0.135 IN CARD IN BOTTOM OF SHOTCUP

LEAD MUZZLE CHAMBER

12 GAUGE 23⁄4 INCH 1 OUNCE LOADS (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: FEDERAL PLASTIC GOLD MEDAL, TOP GUN, MULTI PURPOSE

REMINGTON 209P PB 20.5 REM. TGT12 1 1090 4300 REMINGTON 209P PB 22.0 REM. TGT12 1 1160 5200 REMINGTON 209P PB 23.0 REM. TGT12 1 1205 5700 REMINGTON 209P PB 24.0 REM. TGT12 1 1250 6300 REMINGTON 209P PB 20.0 FED. 12S3 1 1105 5200 REMINGTON 209P PB 21.0 FED. 12S3 1 1150 5700 REMINGTON 209P PB 22.5 FED. 12S3 1 1210 6600 REMINGTON 209P PB 23.5 FED. 12S3 1 1250 7200

WINCHESTER 209 PB 19.5 WIN. WAA12SL 1 1090 4900 WINCHESTER 209 PB 21.0 WIN. WAA12SL 1 1150 5400 WINCHESTER 209 PB 22.5 WIN. WAA12SL 1 1205 6000 WINCHESTER 209 PB 24.0 WIN. WAA12SL 1 1265 6700 WINCHESTER 209 PB 20.5 CB. CB1100-12 1 1100 4300 WINCHESTER 209 PB 21.5 CB. CB1100-12 1 1145 4800 WINCHESTER 209 PB 23.0 CB. CB1100-12 1 1205 5400 WINCHESTER 209 PB 24.5 CB. CB1100-12 1 1260 6100 WINCHESTER 209 PB 20.0 REM. TGT12 1 1110 5300 WINCHESTER 209 PB 21.0 REM. TGT12 1 1155 5900 WINCHESTER 209 PB 22.0 REM. TGT12 1 1205 6500 WINCHESTER 209 PB 23.5 REM. TGT12 1 1255 7000 WINCHESTER 209 PB 19.5 FED. 12S3 1 1105 5100 WINCHESTER 209 PB 21.0 FED. 12S3 1 1155 5800 WINCHESTER 209 PB 22.5 FED. 12S3 1 1210 6500 WINCHESTER 209 PB 23.5 FED. 12S3 1 1250 6900

FEDERAL 209A SR7625 22.5 WIN. WAA12SL 1 1105 4600 FEDERAL 209A SR7625 23.5 WIN. WAA12SL 1 1160 5200 FEDERAL 209A SR7625 24.5 WIN. WAA12SL 1 1210 5900 FEDERAL 209A SR7625 25.5 WIN. WAA12SL 1 1265 6600 FEDERAL 209A SR7625 22.5 CB. CB2100-12 1 1090 4200 FEDERAL 209A SR7625 23.5 CB. CB2100-12 1 1140 4700 FEDERAL 209A SR7625 25.0 CB. CB2100-12 1 1200 5300 FEDERAL 209A SR7625 26.0 CB. CB2100-12 1 1250 5800 FEDERAL 209A SR7625 22.0 REM. TGT12 1 1100 4200 FEDERAL 209A SR7625 23.0 REM. TGT12 1 1145 4800 FEDERAL 209A SR7625 24.0 REM. TGT12 1 1190 5500 FEDERAL 209A SR7625 25.5 REM. TGT12 1 1250 6200 FEDERAL 209A SR7625 22.0 FED. 12S3 1 1090 4500 FEDERAL 209A SR7625 23.5 FED. 12S3 1 1160 5400 FEDERAL 209A SR7625 24.5 FED. 12S3 1 1210 6000 FEDERAL 209A SR7625 25.5 FED. 12S3 1 1255 6600

WINCHESTER 209 SR7625 22. 5 WIN. WAA12SL 1 1105 4600 WINCHESTER 209 SR7625 23. 5 WIN. WAA12SL 1 1150 4900 WINCHESTER 209 SR7625 25. 0 WIN. WAA12SL 1 1210 5300 WINCHESTER 209 SR7625 26. 0 WIN. WAA12SL 1 1250 5600 WINCHESTER 209 SR7625 22. 0 CB. CB2100-12 1 1095 4300 WINCHESTER 209 SR7625 23. 5 CB. CB2100-12 1 1145 4600 WINCHESTER 209 SR7625 25. 0 CB. CB2100-12 1 1195 4900 WINCHESTER 209 SR7625 26. 5 CB. CB2100-12 1 1245 5200 WINCHESTER 209 SR7625 22. 5 REM. TG T 1 2 1 1105 4300 WINCHESTER 209 SR7625 23. 5 REM. TG T 1 2 1 1145 4700 WINCHESTER 209 SR7625 25. 0 REM. TG T 1 2 1 1205 5400 WINCHESTER 209 SR7625 26. 0 REM. TG T 1 2 1 1245 5900 WINCHESTER 209 SR7625 21. 5 FED. 12S3 1 1110 4700 WINCHESTER 209 SR7625 22. 5 FED. 12S3 1 1150 5200 WINCHESTER 209 SR7625 24. 0 FED. 12S3 1 1210 5900 WINCHESTER 209 SR7625 25. 5 FED. 12S3 1 1255 6600

LEAD MUZZLE CHAMBER

SHELL: REMINGTON PREMIER, RTL, STS, NITRO 27

FEDERAL 209A “HI-SKOR” 700-X 14.5 WI N. WAA12SL 1 1105 7700 FEDERAL 209A “HI-SKOR” 700-X 15.5 WI N. WAA12SL 1 1150 8600 FEDERAL 209A “HI-SKOR” 700-X 16.5 WI N. WAA12SL 1 1200 9500 FEDERAL 209A “HI-SKOR” 700-X 18.0 WI N. WAA12SL 1 1260 10800 FEDERAL 209A “HI-SKOR” 700-X 14.5 CB. CB1100-12 1 1090 6600 FEDERAL 209A “HI-SKOR” 700-X 16.0 CB. CB1100-12 1 1160 7900 FEDERAL 209A “HI-SKOR” 700-X 17.0 CB. CB1100-12 1 1205 8700 FEDERAL 209A “HI-SKOR” 700-X 18.0 CB. CB1100-12 1 1250 9600 FEDERAL 209A “HI-SKOR” 700-X 14.5 REM . TGT12 1 1100 7200

NOTE - ALL DATA SHOWN IS FOR LEAD SHOT. DO NOT ATTEMPT TO LOAD WITH STEEL SHOT AS DANGEROUS LOADS MAY RESULT.

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

12 GAUGE 23⁄4 INCH 1 OUNCE LOADS (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: REMINGTON PREMIER, RTL, STS, NITRO 27

FEDERAL 209A “HI-SKOR” 700-X 15.5 REM . TGT12 1 1150 8100 FEDERAL 209A “HI-SKOR” 700-X 16.5 REM . TGT12 1 1205 9100 FEDERAL 209A “HI-SKOR” 700-X 17.5 REM . TGT12 1 1245 10000 FEDERAL 209A “HI-SKOR” 700-X 14.5 FED. 12S3 1 1095 8000 FEDERAL 209A “HI-SKOR” 700-X 15.5 FED. 12S3 1 1140 8900 FEDERAL 209A “HI-SKOR” 700-X 17.0 FED. 12S3 1 1210 10300 FEDERAL 209A “HI-SKOR” 700-X 18.0 FED. 12S3 1 1250 11200

REMINGTON 209P “HI-SKOR” 700-X 14.5 WI N. WAA12SL 1 1100 7300 REMINGTON 209P “HI-SKOR” 700-X 15.5 WI N. WAA12SL 1 1145 8100 REMINGTON 209P “HI-SKOR” 700-X 16.5 WI N. WAA12SL 1 1195 9000 REMINGTON 209P “HI-SKOR” 700-X 18.0 WI N. WAA12SL 1 1255 10500 REMINGTON 209P “HI-SKOR” 700-X 15.0 CB. CB1100-12 1 1105 6500 REMINGTON 209P “HI-SKOR” 700-X 16.0 CB. CB1100-12 1 1150 7200 REMINGTON 209P “HI-SKOR” 700-X 17.0 CB. CB1100-12 1 1195 8000 REMINGTON 209P “HI-SKOR” 700-X 18.5 CB. CB1100-12 1 1260 9400 REMINGTON 209P “HI-SKOR” 700-X 14.5 REM . TGT12 1 1090 6600 REMINGTON 209P “HI-SKOR” 700-X 15.5 REM . TGT12 1 1140 7500 REMINGTON 209P “HI-SKOR” 700-X 16.5 REM . TGT12 1 1190 8400 REMINGTON 209P “HI-SKOR” 700-X 18.0 REM . TGT12 1 1250 9500 REMINGTON 209P “HI-SKOR” 700-X 14.5 FED. 12S3 1 1090 7400 REMINGTON 209P “HI-SKOR” 700-X 15.5 FED. 12S3 1 1140 8300 REMINGTON 209P “HI-SKOR” 700-X 17.0 FED. 12S3 1 1205 9700 REMINGTON 209P “HI-SKOR” 700-X 18.0 FED. 12S3 1 1250 10600

WINCHESTER 209 “HI-SKOR” 700-X 15.0 WIN. WAA12SL 1 1110 7400 WINCHESTER 209 “HI-SKOR” 700-X 16.0 WIN. WAA12SL 1 1160 8300 WINCHESTER 209 “HI-SKOR” 700-X 17.0 WIN. WAA12SL 1 1205 9300 WINCHESTER 209 “HI-SKOR” 700-X 18.0 WIN. WAA12SL 1 1250 10300 WINCHESTER 209 “HI-SKOR” 700-X 15.0 CB. CB1100-12 1 1095 6300 WINCHESTER 209 “HI-SKOR” 700-X 16.0 CB. CB1100-12 1 1150 7200 WINCHESTER 209 “HI-SKOR” 700-X 17.0 CB. CB1100-12 1 1195 8200 WINCHESTER 209 “HI-SKOR” 700-X 18.0 CB. CB1100-12 1 1240 9200 WINCHESTER 209 “HI-SKOR” 700-X 15.0 REM. TGT12 1 1110 7300 WINCHESTER 209 “HI-SKOR” 700-X 15.5 REM. TGT12 1 1140 7700 WINCHESTER 209 “HI-SKOR” 700-X 16.5 REM. TGT12 1 1195 8700 WINCHESTER 209 “HI-SKOR” 700-X 18.0 REM. TGT12 1 1255 9800 WINCHESTER 209 “HI-SKOR” 700-X 14.5 FED. 12S3 1 1090 7800 WINCHESTER 209 “HI-SKOR” 700-X 15.5 FED. 12S3 1 1135 8700 WINCHESTER 209 “HI-SKOR” 700-X 17.0 FED. 12S3 1 1210 10100 WINCHESTER 209 “HI-SKOR” 700-X 18.0 FED. 12S3 1 1255 11100

FEDERAL 209A PB 18.0 WIN. WAA12SL 1 1115 7000 FEDERAL 209A PB 19.0 WIN. WAA12SL 1 1150 7500 FEDERAL 209A PB 20.5 WIN. WAA12SL 1 1200 8200 FEDERAL 209A PB 22.0 WIN. WAA12SL 1 1255 8900 FEDERAL 209A PB 18.5 CB. CB1100-12 1 1095 5700 FEDERAL 209A PB 20.0 CB. CB1100-12 1 1155 6600 FEDERAL 209A PB 21.0 CB. CB1100-12 1 1195 7200 FEDERAL 209A PB 22.5 CB. CB1100-12 1 1255 8000 FEDERAL 209A PB 18.5 REM. TGT12 1 1105 6200 FEDERAL 209A PB 19.5 REM. TGT12 1 1145 6700 FEDERAL 209A PB 21.0 REM. TGT12 1 1200 7400 FEDERAL 209A PB 22.5 REM. TGT12 1 1255 8200 FEDERAL 209A PB 18.0 FED. 12S3 1 1100 6500 FEDERAL 209A PB 19.0 FED. 12S3 1 1140 7200 FEDERAL 209A PB 20.5 FED. 12S3 1 1200 8300 FEDERAL 209A PB 22.0 FED. 12S3 1 1260 9300

REMINGTON 209P PB 18.0 WIN. WAA12SL 1 1095 6500 REMINGTON 209P PB 19.5 WIN. WAA12SL 1 1150 7200 REMINGTON 209P PB 20.5 WIN. WAA12SL 1 1190 7700 REMINGTON 209P PB 22.5 WIN. WAA12SL 1 1265 8700 REMINGTON 209P PB 19.5 CB. CB1100-12 1 1100 5100 REMINGTON 209P PB 20.5 CB. CB1100-12 1 1150 5700 REMINGTON 209P PB 21.5 CB. CB1100-12 1 1190 6200 REMINGTON 209P PB 23.0 CB. CB1100-12 1 1250 7200 REMINGTON 209P PB 19.0 REM. TGT12 1 1110 5700 REMINGTON 209P PB 20.0 REM. TGT12 1 1150 6300 REMINGTON 209P PB 21.5 REM. TGT12 1 1210 7100 REMINGTON 209P PB 22.5 REM. TGT12 1 1250 7600 REMINGTON 209P PB 18.5 FED. 12S3 1 1095 6100 REMINGTON 209P PB 20.0 FED. 12S3 1 1155 7100

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

REMINGTON 209P PB 21.0 FED. 12S3 1 1200 7800 REMINGTON 209P PB 22.5 FED. 12S3 1 1260 8500

NOTE - ALL DATA SHOWN IS FOR LEAD SHOT. DO NOT ATTEMPT TO LOAD WITH STEEL SHOT AS DANGEROUS LOADS MAY RESULT.

LEAD MUZZLE CHAMBER

12 GAUGE 23⁄4 INCH 1 OUNCE LOADS (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: REMINGTON PREMIER, RTL, STS, NITRO 27

WINCHESTER 209 PB 18.5 WIN. WAA12 1 1100 5900 WINCHESTER 209 PB 19.5 WIN. WAA12 1 1140 6500 WINCHESTER 209 PB 21.0 WIN. WAA12 1 1195 7300 WINCHESTER 209 PB 22.5 WIN. WAA12 1 1255 8100 WINCHESTER 209 PB 19.5 CB. CB1100-12 1 1105 5400 WINCHESTER 209 PB 20.5 CB. CB1100-12 1 1150 5900 WINCHESTER 209 PB 21.5 CB. CB1100-12 1 1195 6400 WINCHESTER 209 PB 23.0 CB. CB1100-12 1 1250 7100 WINCHESTER 209 PB 19.0 REM. TGT12 1 1100 5700 WINCHESTER 209 PB 20.0 REM. TGT12 1 1145 6300 WINCHESTER 209 PB 21.0 REM. TGT12 1 1190 6800 WINCHESTER 209 PB 22.5 REM. TGT12 1 1255 7700 WINCHESTER 209 PB 19.0 FED. 12S3 1 1110 6300 WINCHESTER 209 PB 20.0 FED. 12S3 1 1150 7000 WINCHESTER 209 PB 21.0 FED. 12S3 1 1195 7700 WINCHESTER 209 PB 22.5 FED. 12S3 1 1255 8700

FEDERAL 209A SR7625 19.0 WIN. WAA12SL 1 1095 4200 FEDERAL 209A SR7625 20.5 WIN. WAA12SL 1 1150 5700 FEDERAL 209A SR7625 22.0 WIN. WAA12SL 1 1205 7200 FEDERAL 209A SR7625 23.5 WIN. WAA12SL 1 1260 8500 FEDERAL 209A SR7625 20.5 CB. CB1100-12 1 1090 5000 FEDERAL 209A SR7625 22.0 CB. CB1100-12 1 1150 5900 FEDERAL 209A SR7625 23.0 CB. CB1100-12 1 1195 6500 FEDERAL 209A SR7625 24.5 CB. CB1100-12 1 1255 7400 FEDERAL 209A SR7625 20.5 REM. TGT12 1 1095 5300 FEDERAL 209A SR7625 22.0 REM. TGT12 1 1160 6300 FEDERAL 209A SR7625 23.0 REM. TGT12 1 1200 6900 FEDERAL 209A SR7625 24.0 REM. TGT12 1 1245 7400 FEDERAL 209A SR7625 20.0 FED. 12S3 1 1095 6100 FEDERAL 209A SR7625 21.0 FED. 12S3 1 1140 6700 FEDERAL 209A SR7625 22.5 FED. 12S3 1 1205 7600 FEDERAL 209A SR7625 23.5 FED. 12S3 1 1250 8300

REMINGTON 209P SR7625 21.0 WIN. WAA12SL 1 1100 5800 REMINGTON 209P SR7625 22.0 WIN. WAA12SL 1 1150 6200 REMINGTON 209P SR7625 23.0 WIN. WAA12SL 1 1195 6800 REMINGTON 209P SR7625 24.5 WIN. WAA12SL 1 1260 8100 REMINGTON 209P SR7625 22.0 CB. CB1100-12 1 1110 4700 REMINGTON 209P SR7625 23.0 CB. CB1100-12 1 1155 5100 REMINGTON 209P SR7625 24.0 CB. CB1100-12 1 1200 5500 REMINGTON 209P SR7625 25.0 CB. CB1100-12 1 1250 5900 REMINGTON 209P SR7625 21.5 REM. TGT12 1 1110 5100 REMINGTON 209P SR7625 22.5 REM. TGT12 1 1155 5700 REMINGTON 209P SR7625 23.5 REM. TGT12 1 1195 6200 REMINGTON 209P SR7625 25.0 REM. TGT12 1 1255 7000 REMINGTON 209P SR7625 20.0 FED. 12S3 1 1105 6000 REMINGTON 209P SR7625 21.0 FED. 12S3 1 1140 6300 REMINGTON 209P SR7625 22.5 FED. 12S3 1 1190 6900 REMINGTON 209P SR7625 24.0 FED. 12S3 1 1260 7800

WINCHESTER 209 SR7625 20. 0 WIN. WAA12SL 1 1105 5700 WINCHESTER 209 SR7625 21. 5 WIN. WAA12SL 1 1150 6100 WINCHESTER 209 SR7625 23. 0 WIN. WAA12SL 1 1200 6700 WINCHESTER 209 SR7625 24. 0 WIN. WAA12SL 1 1250 7200 WINCHESTER 209 SR7625 21. 0 CB. CB1100-12 1 1090 4600 WINCHESTER 209 SR7625 22. 5 CB. CB1100-12 1 1150 5100 WINCHESTER 209 SR7625 24. 0 CB. CB1100-12 1 1195 5500 WINCHESTER 209 SR7625 25. 5 CB. CB1100-12 1 1250 5900 WINCHESTER 209 SR7625 21. 0 REM. TG T 1 2 1 1105 5300 WINCHESTER 209 SR7625 22. 0 REM. TG T 1 2 1 1145 5700 WINCHESTER 209 SR7625 23. 0 REM. TG T 1 2 1 1190 6300 WINCHESTER 209 SR7625 24. 5 REM. TG T 1 2 1 1260 7100 WINCHESTER 209 SR7625 21. 0 FED. 12S3 1 1100 5300 WINCHESTER 209 SR7625 22. 0 FED. 12S3 1 1145 6000 WINCHESTER 209 SR7625 23. 0 FED. 12S3 1 1195 6800 WINCHESTER 209 SR7625 24. 0 FED. 12S3 1 1250 7900

LEAD MUZZLE CHAMBER

SHELL: REMINGTON GUN CLUB

CHEDDITE 209 HI-SKOR 700X 16.0 REM. TGT12 1 1183 8800 CHEDDITE 209 HI-SKOR 700X 17.5 REM. TGT12 1 1237 9500 CHEDDITE 209 HI-SKOR 700X 16.0 WIN . 12SL 1 1183 9400

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

CHEDDITE 209 HI-SKOR 700X 17.0 WIN . 12SL 1 1234 10200

NOTE - ALL DATA SHOWN IS FOR LEAD SHOT. DO NOT ATTEMPT TO LOAD WITH STEEL SHOT AS DANGEROUS LOADS MAY RESULT.

12 GAUGE 23⁄4 INCH 1 OUNCE LOADS (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: REMINGTON GUN CLUB

REMINGTON STSHI-SKOR 700X 16.0 REM. TGT12 1 1181 8300 REMINGTON STSHI-SKOR 700X 17.0 REM. TGT12 1 1235 9400 REMINGTON STSHI-SKOR 700X 16.0 WIN. 12SL 1 1184 9100 REMINGTON STSHI-SKOR 700X 17.0 WIN. 12SL 1 1237 10300

WINCHESTER 209 HI-SKOR 700X 16.0 REM. TGT12 1 1180 9100 WINCHESTER 209 HI-SKOR 700X 17.5 REM. TGT12 1 1237 9600 WINCHESTER 209 HI-SKOR 700X 16.0 WIN . 12SL 1 1184 8700 WINCHESTER 209 HI-SKOR 700X 17.5 WIN . 12SL 1 1234 10000

SHELL: WINCHESTER AA

FEDERAL 209A “HI-SKOR” 700-X 15.0 WI N. WAA12SL 1 1110 7300 FEDERAL 209A “HI-SKOR” 700X 16.0 WI N. WAA12SL 1 1155 8000 FEDERAL 209A “HI-SKOR” 700-X 17.0 WI N. WAA12SL 1 1195 8700 FEDERAL 209A “HI-SKOR” 700-X 18.5 WI N. WAA12SL 1 1255 9700 FEDERAL 209A “HI-SKOR” 700-X 15.0 CB. CB1100-12 1 1100 6300 FEDERAL 209A “HI-SKOR” 700-X 16.0 CB. CB1100-12 1 1145 7000 FEDERAL 209A “HI-SKOR” 700-X 17.5 CB. CB1100-12 1 1205 8000 FEDERAL 209A “HI-SKOR” 700-X 18.5 CB. CB1100-12 1 1250 8700 FEDERAL 209A “HI-SKOR” 700-X 15.0 REM . TGT12 1 1110 6900 FEDERAL 209A “HI-SKOR” 700-X 16.0 REM . TGT12 1 1155 7500 FEDERAL 209A “HI-SKOR” 700-X 17.0 REM . TGT12 1 1195 8200 FEDERAL 209A “HI-SKOR” 700-X 18.5 REM . TGT12 1 1260 9400 FEDERAL 209A “HI-SKOR” 700-X 14.5 FED. 12S3 1 1090 7900 FEDERAL 209A “HI-SKOR” 700-X 15.5 FED. 12S3 1 1140 8700 FEDERAL 209A “HI-SKOR” 700-X 17.0 FED. 12S3 1 1210 9900 FEDERAL 209A “HI-SKOR” 700-X 18.0 FED. 12S3 1 1250 10700

REMINGTON 209P “HI-SKOR” 700-X 15.0 WI N. WAA12SL 1 1095 6400 REMINGTON 209P “HI-SKOR” 700-X 16.5 WI N. WAA12SL 1 1155 7000 REMINGTON 209P “HI-SKOR” 700-X 18.0 WI N. WAA12SL 1 1210 7600 REMINGTON 209P “HI-SKOR” 700-X 19.0 WI N. WAA12SL 1 1245 8000 REMINGTON 209P “HI-SKOR” 700-X 16.0 CB. CB1100-12 1 1110 5000 REMINGTON 209P “HI-SKOR” 700-X 17.0 CB. CB1100-12 1 1150 5600 REMINGTON 209P “HI-SKOR” 700-X 18.0 CB. CB1100-12 1 1190 6100 REMINGTON 209P “HI-SKOR” 700-X 19.5 CB. CB1100-12 1 1250 7000 REMINGTON 209P “HI-SKOR” 700-X 15.5 REM . TGT12 1 1105 5800 REMINGTON 209P “HI-SKOR” 700-X 16.5 REM . TGT12 1 1140 6200 REMINGTON 209P “HI-SKOR” 700-X 18.0 REM . TGT12 1 1205 7100 REMINGTON 209P “HI-SKOR” 700-X 19.0 REM . TGT12 1 1250 7700 REMINGTON 209P “HI-SKOR” 700-X 15.0 FED. 12S3 1 1105 7100 REMINGTON 209P “HI-SKOR” 700-X 16.5 FED. 12S3 1 1160 7900 REMINGTON 209P “HI-SKOR” 700-X 17.5 FED. 12S3 1 1200 8600 REMINGTON 209P “HI-SKOR” 700-X 18.5 FED. 12S3 1 1250 9300

WINCHESTER 209 “HI-SKOR” 700-X 14.5 WIN. WAA12SL 1 1105 7500 WINCHESTER 209 “HI-SKOR” 700-X 15.5 WIN. WAA12SL 1 1145 8200 WINCHESTER 209 “HI-SKOR” 700-X 16.5 WIN. WAA12SL 1 1195 9000 WINCHESTER 209 “HI-SKOR” 700-X 18.0 WIN. WAA12SL 1 1250 10100 WINCHESTER 209 “HI-SKOR” 700-X 14.5 CB. CB1100-12 1 1090 6500 WINCHESTER 209 “HI-SKOR” 700-X 15.5 CB. CB1100-12 1 1140 7400 WINCHESTER 209 “HI-SKOR” 700-X 17.0 CB. CB1100-12 1 1205 8500 WINCHESTER 209 “HI-SKOR” 700-X 18.0 CB. CB1100-12 1 1245 9300 WINCHESTER 209 “HI-SKOR” 700-X 14.5 REM. TGT12 1 1095 6700 WINCHESTER 209 “HI-SKOR” 700-X 15.5 REM. TGT12 1 1140 7400 WINCHESTER 209 “HI-SKOR” 700-X 16.5 REM. TGT12 1 1190 8200 WINCHESTER 209 “HI-SKOR” 700-X 18.0 REM. TGT12 1 1250 9400 WINCHESTER 209 “HI-SKOR” 700-X 14.5 FED. 12S3 1 1100 8200 WINCHESTER 209 “HI-SKOR” 700-X 15.5 FED. 12S3 1 1140 8800 WINCHESTER 209 “HI-SKOR” 700-X 17.0 FED. 12S3 1 1205 9700 WINCHESTER 209 “HI-SKOR” 700-X 18.0 FED. 12S3 1 1250 10500

FEDERAL 209A PB 18.5 WIN. WAA12 1 1110 6200 FEDERAL 209A PB 19.5 WIN. WAA12 1 1150 6900 FEDERAL 209A PB 21.0 WIN. WAA12 1 1210 7900 FEDERAL 209A PB 22.5 WIN. WAA12 1 1260 8600 FEDERAL 209A PB 18.5 CB. CB1100-12 1 1095 5200 FEDERAL 209A PB 20.0 CB. CB1100-12 1 1145 5800 FEDERAL 209A PB 21.5 CB. CB1100-12 1 1200 6400 FEDERAL 209A PB 23.0 CB. CB1100-12 1 1260 7200 FEDERAL 209A PB 18.5 REM. FIG8 1 1095 5300 FEDERAL 209A PB 20.0 REM. FIG8 1 1150 6100

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

FEDERAL 209A PB 21.0 REM. FIG8 1 1190 6600 FEDERAL 209A PB 22.5 REM. FIG8 1 1250 7400

LEAD MUZZLE CHAMBER

12 GAUGE 23⁄4 INCH 1 OUNCE LOADS (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: WINCHESTER AA

FEDERAL 209A PB 18.0 FED. 12S3 1 1095 6100 FEDERAL 209A PB 19.5 FED. 12S3 1 1155 7200

FEDERAL 209A PB 20.5 FED. 12S3 1 1195 7900 FEDERAL 209A PB 22.0 FED. 12S3 1 1255 8900

REMINGTON 209P PB 19.0 WIN. WAA12 1 1110 5700 REMINGTON 209P PB 20.0 WIN. WAA12 1 1145 6200 REMINGTON 209P PB 21.5 WIN. WAA12 1 1205 7100 REMINGTON 209P PB 22.5 WIN. WAA12 1 1250 7700 REMINGTON 209P PB 19.0 CB. CB1100-12 1 1100 4600 REMINGTON 209P PB 20.5 CB. CB1100-12 1 1150 5100 REMINGTON 209P PB 22.0 CB. CB1100-12 1 1200 5700 REMINGTON 209P PB 23.5 CB. CB1100-12 1 1260 6500

REMINGTON 209P PB 19.0 REM. FIG8 1 1085 4500 REMINGTON 209P PB 21.0 REM. FIG8 1 1150 5300 REMINGTON 209P PB 22.0 REM. FIG8 1 1190 5700 REMINGTON 209P PB 23.5 REM. FIG8 1 1255 6700 REMINGTON 209P PB 19.0 FED. 12S3 1 1095 5100 REMINGTON 209P PB 20.5 FED. 12S3 1 1150 6000 REMINGTON 209P PB 22.0 FED. 12S3 1 1205 6900 REMINGTON 209P PB 23.5 FED. 12S3 1 1260 7600

WINCHESTER 209 PB 18.5 WIN. WAA12 1 1105 5900 WINCHESTER 209 PB 20.0 WIN. WAA12 1 1150 6500 WINCHESTER 209 PB 21.5 WIN. WAA12 1 1200 7100 WINCHESTER 209 PB 23.0 WIN. WAA12 1 1260 7900 WINCHESTER 209 PB 19.0 CB. CB1100-12 1 1110 5100 WINCHESTER 209 PB 20.5 CB. CB1100-12 1 1140 5600 WINCHESTER 209 PB 22.0 CB. CB1100-12 1 1190 6100 WINCHESTER 209 PB 23.5 CB. CB1100-12 1 1255 6600 WINCHESTER 209 PB 18.0 REM. TGT12 1 1095 4800 WINCHESTER 209 PB 19.5 REM. TGT12 1 1140 5600 WINCHESTER 209 PB 21.5 REM. TGT12 1 1200 6700 WINCHESTER 209 PB 23.0 REM. TGT12 1 1260 7500 WINCHESTER 209 PB 19.0 REM. FIG8 1 1100 5400 WINCHESTER 209 PB 20.0 REM. FIG8 1 1140 5800 WINCHESTER 209 PB 21.5 REM. FIG8 1 1195 6500 WINCHESTER 209 PB 23.0 REM. FIG8 1 1255 7200 WINCHESTER 209 PB 19.0 FED. 12S3 1 1105 5900 WINCHESTER 209 PB 20.5 FED. 12S3 1 1160 6800 WINCHESTER 209 PB 21.5 FED. 12S3 1 1200 7400 WINCHESTER 209 PB 23.0 FED. 12S3 1 1250 8100

FEDERAL 209A SR7625 20.0 WIN. WAA12 1 1095 6000 FEDERAL 209A SR7625 21.5 WIN. WAA12 1 1145 6300 FEDERAL 209A SR7625 23.5 WIN. WAA12 1 1205 6900 FEDERAL 209A SR7625 25.0 WIN. WAA12 1 1260 7400 FEDERAL 209A SR7625 21.0 CB. CB1118-12 1 1100 4600 FEDERAL 209A SR7625 22.0 CB. CB1118-12 1 1145 5200 FEDERAL 209A SR7625 23.5 CB. CB1118-12 1 1210 6200 FEDERAL 209A SR7625 24.5 CB. CB1118-12 1 1250 6700 FEDERAL 209A SR7625 21.5 REM. RXP12 1 1110 5000 FEDERAL 209A SR7625 22.5 REM. RXP12 1 1150 5400 FEDERAL 209A SR7625 23.5 REM. RXP12 1 1190 5900 FEDERAL 209A SR7625 25.0 REM. RXP12 1 1250 6700 FEDERAL 209A SR7625 20.5 FED. 12S3 1 1110 5400 FEDERAL 209A SR7625 21.5 FED. 12S3 1 1145 5900 FEDERAL 209A SR7625 23.0 FED. 12S3 1 1200 6600 FEDERAL 209A SR7625 24.5 FED. 12S3 1 1255 7300

REMINGTON 209P SR7625 21.5 WIN. WAA12 1 1105 5000 REMINGTON 209P SR7625 22.5 WIN. WAA12 1 1150 5700 REMINGTON 209P SR7625 23.5 WIN. WAA12 1 1195 6200 REMINGTON 209P SR7625 25.0 WIN. WAA12 1 1255 7100 REMINGTON 209P SR7625 22.5 CB. CB1118-12 1 1110 4400 REMINGTON 209P SR7625 23.5 CB. CB1118-12 1 1145 4700 REMINGTON 209P SR7625 24.5 CB. CB1118-12 1 1190 5300 REMINGTON 209P SR7625 26.0 CB. CB1118-12 1 1265 6300

LEAD MUZZLE CHAMBER

NOTE - ALL DATA SHOWN IS FOR LEAD SHOT. DO NOT ATTEMPT TO LOAD WITH STEEL SHOT AS DANGEROUS LOADS MAY RESULT.

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

12 GAUGE 23⁄4 INCH 1 OUNCE LOADS (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: WINCHESTER AA

REMINGTON 209P SR7625 22.5 REM. RXP12 1 1100 4200 REMINGTON 209P SR7625 23.5 REM. RXP12 1 1145 4700 REMINGTON 209P SR7625 24.5 REM. RXP12 1 1190 5200 REMINGTON 209P SR7625 25.5 REM. RXP12 1 1245 6000 REMINGTON 209P SR7625 22.0 FED. 12S3 1 1095 4500 REMINGTON 209P SR7625 23.5 FED. 12S3 1 1160 5300 REMINGTON 209P SR7625 24.5 FED. 12S3 1 1210 6000 REMINGTON 209P SR7625 25.5 FED. 12S3 1 1265 6900

WINCHESTER 209 SR7625 21. 5 WIN. WAA12 1 1095 4900 WINCHESTER 209 SR7625 23. 0 WIN. WAA12 1 1150 5500 WINCHESTER 209 SR7625 24. 0 WIN. WAA12 1 1190 5800 WINCHESTER 209 SR7625 25. 5 WIN. WAA12 1 1255 6600 WINCHESTER 209 SR7625 22. 0 CB. CB1118-12 1 1095 4500 WINCHESTER 209 SR7625 23. 5 CB. CB1118-12 1 1150 5100

WINCHESTER 209 SR7625 25. 0 CB. CB1118-12 1 1210 5800 WINCHESTER 209 SR7625 26. 0 CB. CB1118-12 1 1250 6200 WINCHESTER 209 SR7625 22. 0 REM. RXP12 1 1095 4600 WINCHESTER 209 SR7625 23. 5 REM. RXP12 1 1140 5000 WINCHESTER 209 SR7625 25. 0 REM. RXP12 1 1200 5700 WINCHESTER 209 SR7625 26. 0 REM. RXP12 1 1245 6200 WINCHESTER 209 SR7625 22. 0 FED. 12S3 1 1105 5300 WINCHESTER 209 SR7625 23. 0 FED. 12S3 1 1155 5900 WINCHESTER 209 SR7625 24. 0 FED. 12S3 1 1205 6500 WINCHESTER 209 SR7625 25. 0 FED. 12S3 1 1250 7100

LEAD MUZZLE CHAMBER

12 GAUGE 23⁄4 INCH 1 1/8 OUNCE LOADS

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: FEDERAL PLASTIC GOLD MEDAL, TOP GUN, MULTI PURPOSE

FEDERAL 209A “HI-SKOR” 700-X 16.0 WI N. WAA12SL 11/8 1110 7900 FEDERAL 209A “HI-SKOR” 700-X 17.0 WI N. WAA12SL 11/8 1150 8700 FEDERAL 209A “HI-SKOR” 700-X 18.0 WI N. WAA12SL 11/8 1190 9500 FEDERAL 209A “HI-SKOR” 700-X 19.5 WI N. WAA12SL 11/8 1250 10600 FEDERAL 209A “HI-SKOR” 700-X 16.0 CB. CB2118-12 11/8 1110 7900 FEDERAL 209A “HI-SKOR” 700-X 17.0 CB. CB2118-12 11/8 1155 8600 FEDERAL 209A “HI-SKOR” 700-X 18.0 CB. CB2118-12 11/8 1195 9500 FEDERAL 209A “HI-SKOR” 700-X 19.5 CB. CB2118-12 11/8 1260 10800 FEDERAL 209A “HI-SKOR” 700-X 16.0 REM . TGT12 11/8 1100 7400 FEDERAL 209A “HI-SKOR” 700-X 17.0 REM . TGT12 11/8 1145 8200 FEDERAL 209A “HI-SKOR” 700-X 18.0 REM . TGT12 11/8 1190 9100 FEDERAL 209A “HI-SKOR” 700-X 19.5 REM . TGT12 11/8 1250 10500 FEDERAL 209A “HI-SKOR” 700-X 16.0 FED. 12S3 11 /8 1105 7900 FEDERAL 209A “HI-SKOR” 700-X 17.0 FED. 12S3 11 /8 1145 8600 FEDERAL 209A “HI-SKOR” 700-X 18.5 FED. 12S3 11 /8 1205 9500 FEDERAL 209A “HI-SKOR” 700-X 20.0 FED. 12S3 11 /8 1260 10400

REMINGTON 209P “HI-SKOR” 700-X 16.5 WI N. WAA12SL 11/8 1110 7500 REMINGTON 209P “HI-SKOR” 700-X 17.5 WI N. WAA12SL 11/8 1155 8200 REMINGTON 209P “HI-SKOR” 700-X 18.5 WI N. WAA12SL 11/8 1195 8700 REMINGTON 209P “HI-SKOR” 700-X 20.0 WI N. WAA12SL 11/8 1255 9500 REMINGTON 209P “HI-SKOR” 700-X 16.0 CB. CB2118-12 11/8 1095 7200 REMINGTON 209P “HI-SKOR” 700-X 17.0 CB. CB2118-12 11/8 1140 7900 REMINGTON 209P “HI-SKOR” 700-X 18.5 CB. CB2118-12 11/8 1195 8700 REMINGTON 209P “HI-SKOR” 700-X 20.0 CB. CB2118-12 11/8 1250 9600 REMINGTON 209P “HI-SKOR” 700-X 16.0 REM . TGT12 11/8 1090 6900 REMINGTON 209P “HI-SKOR” 700-X 17.5 REM . TGT12 11/8 1150 7800 REMINGTON 209P “HI-SKOR” 700-X 18.5 REM . TGT12 11/8 1190 8500 REMINGTON 209P “HI-SKOR” 700-X 20.0 REM . TGT12 11/8 1250 9500 REMINGTON 209P “HI-SKOR” 700-X 16.0 FED. 12S3 11 /8 1095 7500 REMINGTON 209P “HI-SKOR” 700-X 17.5 FED. 12S3 11 /8 1155 8300 REMINGTON 209P “HI-SKOR” 700-X 18.5 FED. 12S3 11 /8 1190 8900 REMINGTON 209P “HI-SKOR” 700-X 20.0 FED. 12S3 11 /8 1250 9800

WINCHESTER 209 “HI-SKOR” 700-X 16.0 WIN. WAA12SL 11/8 1100 7200 WINCHESTER 209 “HI-SKOR” 700-X 17.0 WIN. WAA12SL 11/8 1145 7900 WINCHESTER 209 “HI-SKOR” 700-X 18.5 WIN. WAA12SL 11/8 1205 9100

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

WINCHESTER 209 “HI-SKOR” 700-X 19.5 WIN. WAA12SL 11/8 1245 9900 WINCHESTER 209 “HI-SKOR” 700-X 16.0 CB. CB2118-12 11/8 1100 7200 WINCHESTER 209 “HI-SKOR” 700-X 17.0 CB. CB2118-12 11/8 1145 7900

NOTE - ALL DATA SHOWN IS FOR LEAD SHOT. DO NOT ATTEMPT TO LOAD WITH STEEL SHOT AS DANGEROUS LOADS MAY RESULT.

LEAD MUZZLE CHAMBER

12 GAUGE 23⁄4 INCH 1 1/8 OUNCE LOADS (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: FEDERAL PLASTIC GOLD MEDAL, TOP GUN, MULTI PURPOSE

WINCHESTER 209 “HI-SKOR” 700-X 18.5 CB. CB2118-12 11/8 1205 9200 WINCHESTER 209 “HI-SKOR” 700-X 19.5 CB. CB2118-12 11/8 1245 10000

WINCHESTER 209 “HI-SKOR” 700-X 16.0 REM. TGT12 11/8 1095 6800 WINCHESTER 209 “HI-SKOR” 700-X 17.0 REM. TGT12 11/8 1140 7500 WINCHESTER 209 “HI-SKOR” 700-X 18.5 REM. TGT12 11/8 1195 8600 WINCHESTER 209 “HI-SKOR” 700-X 20.0 REM. TGT12 11/8 1255 9600 WINCHESTER 209 “HI-SKOR” 700-X 16.0 FED. 12S3 11/8 1105 7800 WINCHESTER 209 “HI-SKOR” 700-X 17.0 FED. 12S3 11/8 1150 8500 WINCHESTER 209 “HI-SKOR” 700-X 18.0 FED. 12S3 11/8 1190 9400 WINCHESTER 209 “HI-SKOR” 700-X 19.5 FED. 12S3 11/8 1255 10700

FEDERAL 209A PB 19.5 WIN. WAA12 11/8 1095 6100 FEDERAL 209A PB 21.0 WIN. WAA12 11/8 1150 7000 FEDERAL 209A PB 22.5 WIN. WAA12 11/8 1205 7900 FEDERAL 209A PB 24.0 WIN. WAA12 11/8 1260 8800

FEDERAL 209A PB 20.5 WTW. WINDJAMMER 11/8 1105 5900 FEDERAL 209A PB 21.5 WTW. WINDJAMMER 11/8 1145 6400 FEDERAL 209A PB 23.0 WTW. WINDJAMMER 11/8 1205 7200 FEDERAL 209A PB 24.0 WTW. WINDJAMMER 11/8 1250 7800 FEDERAL 209A PB 20.0 CB. CB1118-12 11/8 1105 6000 FEDERAL 209A PB 21.0 CB. CB1118-12 11/8 1140 6400 FEDERAL 209A PB 22.5 CB. CB1118-12 11/8 1195 7100 FEDERAL 209A PB 24.0 CB. CB1118-12 11/8 1250 8000 FEDERAL 209A PB 20.0 REM. FIG8 11/ 8 1095 6000 FEDERAL 209A PB 21.5 REM. FIG8 11/ 8 1145 6600 FEDERAL 209A PB 23.0 REM. FIG8 11/ 8 1200 7300 FEDERAL 209A PB 24.5 REM. FIG8 11/ 8 1255 8000 FEDERAL 209A PB 19.5 FED. 12S3 11 / 8 1095 6600 FEDERAL 209A PB 21.0 FED. 12S3 11 / 8 1140 7100 FEDERAL 209A PB 22.5 FED. 12S3 11 / 8 1190 7600 FEDERAL 209A PB 24.0 FED. 12S3 11 / 8 1255 8700

REMINGTON 209P PB 20.5 WIN. WAA12SL 11/8 1095 5700 REMINGTON 209P PB 21.5 WIN. WAA12SL 11/8 1140 6400 REMINGTON 209P PB 23.0 WIN. WAA12SL 11/8 1195 7300 REMINGTON 209P PB 25.0 WIN. WAA12SL 11/8 1260 8000 REMINGTON 209P PB 21.0 WTW. WINDJAMMER 11/8 1095 5000 REMINGTON 209P PB 22.5 WTW. WINDJAMMER 11/8 1155 5900 REMINGTON 209P PB 24.0 WTW. WINDJAMMER 11/8 1205 6400 REMINGTON 209P PB 25.5 WTW. WINDJAMMER 11/8 1250 6900 REMINGTON 209P PB 21.0 CB. CB1118-12 11/8 1105 5800 REMINGTON 209P PB 22.5 CB. CB1118-12 11/8 1150 6300 REMINGTON 209P PB 23.5 CB. CB1118-12 11/8 1200 7000 REMINGTON 209P PB 25.0 CB. CB1118-12 11/8 1265 8000 REMINGTON 209P PB 21.0 REM. FIG8 11/ 8 1100 5500 REMINGTON 209P PB 22.5 REM. FIG8 11/ 8 1155 6100 REMINGTON 209P PB 23.5 REM. FIG8 11/ 8 1190 6600 REMINGTON 209P PB 25.0 REM. FIG8 11/ 8 1245 7500 REMINGTON 209P PB 20.5 FED. 12S3 11 / 8 1100 6000 REMINGTON 209P PB 22.0 FED. 12S3 11 / 8 1155 6500 REMINGTON 209P PB 23.0 FED. 12S3 11 / 8 1190 7000 REMINGTON 209P PB 25.0 FED. 12S3 11 / 8 1265 8400

WINCHESTER 209 PB 21.0 WIN. WAA12SL 11/8 1100 6000 WINCHESTER 209 PB 22.0 WIN. WAA12SL 11/8 1140 6600 WINCHESTER 209 PB 23.5 WIN. WAA12SL 11/8 1200 7500 WINCHESTER 209 PB 25.0 WIN. WAA12SL 11/8 1255 8200 WINCHESTER 209 PB 21.0 WTW. WINDJAMM E R 11/8 1105 5500 WINCHESTER 209 PB 22.0 WTW. WINDJAMM E R 11/8 1145 6000 WINCHESTER 209 PB 23.5 WTW. WINDJAMM E R 11/8 1205 7000 WINCHESTER 209 PB 24.5 WTW. WINDJAMM E R 11/8 1250 7700 WINCHESTER 209 PB 20.5 CB. CB1118-12 11/8 1100 5800 WINCHESTER 209 PB 22.0 CB. CB1118-12 11/8 1150 6400 WINCHESTER 209 PB 23.5 CB. CB1118-12 11/8 1200 7000 WINCHESTER 209 PB 25.0 CB. CB1118-12 11/8 1245 7600 WINCHESTER 209 PB 21.0 REM. FIG8 11/8 1105 5900 WINCHESTER 209 PB 22.0 REM. FIG8 11/8 1140 6300

LEAD MUZZLE CHAMBER

NOTE - ALL DATA SHOWN IS FOR LEAD SHOT. DO NOT ATTEMPT TO LOAD WITH STEEL SHOT AS DANGEROUS LOADS MAY RESULT.

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

12 GAUGE 23⁄4 INCH 1 1/8 OUNCE LOADS (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: FEDERAL PLASTIC GOLD MEDAL, TOP GUN, MULTI PURPOSE

WINCHESTER 209 PB 23.5 REM. FIG8 11/8 1200 7000 WINCHESTER 209 PB 25.0 REM. FIG8 11/8 1255 7800 WINCHESTER 209 PB 20.5 FED. 12S3 11/ 8 1090 6100 WINCHESTER 209 PB 22.0 FED. 12S3 11/ 8 1150 7000 WINCHESTER 209 PB 23.0 FED. 12S3 11/ 8 1190 7600 WINCHESTER 209 PB 24.5 FED. 12S3 11/ 8 1250 8400

FEDERAL 209A SR7625 21.5 WIN. WAA12 11/8 1100 6100 FEDERAL 209A SR7625 23.0 WIN. WAA12 11/8 1155 6700 FEDERAL 209A SR7625 24.5 WIN. WAA12 11/8 1200 7400 FEDERAL 209A SR7625 26.0 WIN. WAA12 11/8 1265 8200 FEDERAL 209A SR7625 23.0 WTW. WINDJAMMER 11 /8 1105 5100 FEDERAL 209A SR7625 24.0 WTW. WINDJAMMER 11 /8 1140 5600 FEDERAL 209A SR7625 25.5 WTW. WINDJAMMER 11 /8 1200 6400 FEDERAL 209A SR7625 27.0 WTW. WINDJAMMER 11/8 1265 7400

FEDERAL 209A SR7625 22.0 CB. CB2118-12 1 1/8 1095 5700 FEDERAL 209A SR7625 23.5 CB. CB2118-12 1 1/8 1150 6400 FEDERAL 209A SR7625 24.5 CB. CB2118-12 1 1/8 1195 6800 FEDERAL 209A SR7625 26.0 CB. CB2118-12 1 1/8 1250 7700 FEDERAL 209A SR7625 22.5 REM. FIG8 11/8 1090 5300 FEDERAL 209A SR7625 24.0 REM. FIG8 11/8 1140 5700 FEDERAL 209A SR7625 25.5 REM. FIG8 11/8 1205 6600 FEDERAL 209A SR7625 26.5 REM. FIG8 11/8 1245 7100 FEDERAL 209A SR7625 22.0 FED. 12S3 1 1/ 8 1090 5600 FEDERAL 209A SR7625 23.5 FED. 12S3 1 1/ 8 1150 6400 FEDERAL 209A SR7625 24.5 FED. 12S3 1 1/ 8 1190 6900 FEDERAL 209A SR7625 26.5 FED. 12S3 1 1/ 8 1260 7700

REMINGTON 209P SR7625 22.0 WIN. WAA12 11/8 1100 5600 REMINGTON 209P SR7625 23.5 WIN. WAA12 11/8 1145 6000 REMINGTON 209P SR7625 25.5 WIN. WAA12 11/8 1205 6600 REMINGTON 209P SR7625 27.5 WIN. WAA12 11/8 1255 7200 REMINGTON 209P SR7625 24.0 WTW. WINDJAMMER 11 /8 1095 4300 REMINGTON 209P SR7625 25.5 WTW. WINDJAMMER 11 /8 1140 4700 REMINGTON 209P SR7625 27.0 WTW. WINDJAMMER 11 /8 1200 5400 REMINGTON 209P SR7625 28.5 WTW. WINDJAMMER 11 /8 1265 6100 REMINGTON 209P SR7625 22.5 CB. CB2118-12 1 1/8 1105 5300 REMINGTON 209P SR7625 24.5 CB. CB2118-12 1 1/8 1150 5900 REMINGTON 209P SR7625 26.0 CB. CB2118-12 1 1/8 1205 6600 REMINGTON 209P SR7625 27.0 CB. CB2118-12 1 1/8 1250 7300 REMINGTON 209P SR7625 24.0 REM. FIG8 11/8 1100 5000 REMINGTON 209P SR7625 25.5 REM. FIG8 11/8 1155 5700 REMINGTON 209P SR7625 27.0 REM. FIG8 11/8 1205 6000 REMINGTON 209P SR7625 28.5 REM. FIG8 11/8 1260 6300 REMINGTON 209P SR7625 23.0 FED. 12S3 1 1/ 8 1095 5200 REMINGTON 209P SR7625 24.5 FED. 12S3 1 1/ 8 1155 6000 REMINGTON 209P SR7625 25.5 FED. 12S3 1 1/ 8 1195 6400 REMINGTON 209P SR7625 27.0 FED. 12S3 1 1/ 8 1255 7400

WINCHESTER 209 SR7625 22. 5 WIN. WAA12 11/8 1100 5600 WINCHESTER 209 SR7625 24. 0 WIN. WAA12 11/8 1155 6200 WINCHESTER 209 SR7625 25. 0 WIN. WAA12 11/8 1190 6600 WINCHESTER 209 SR7625 26. 5 WIN. WAA12 11/8 1250 7400 WINCHESTER 209 SR7625 23. 0 WTW. WINDJAMMER 11/8 1095 4900 WINCHESTER 209 SR7625 24. 5 WTW. WINDJAMMER 11/8 1140 5400 WINCHESTER 209 SR7625 26. 0 WTW. WINDJAMMER 11/8 1200 6200 WINCHESTER 209 SR7625 27. 0 WTW. WINDJAMMER 11/8 1245 6900 WINCHESTER 209 SR7625 22. 5 CB. CB2118-12 11/8 1095 5400 WINCHESTER 209 SR7625 24. 0 CB. CB2118-12 11/8 1150 6000 WINCHESTER 209 SR7625 25. 5 CB. CB2118-12 11/8 1200 6700 WINCHESTER 209 SR7625 27. 0 CB. CB2118-12 11/8 1250 7300 WINCHESTER 209 SR7625 23. 0 REM. FIG8 11/8 1095 5200 WINCHESTER 209 SR7625 24. 5 REM. FIG8 11/8 1150 5800 WINCHESTER 209 SR7625 25. 5 REM. FIG8 11/8 1190 6300 WINCHESTER 209 SR7625 27. 0 REM. FIG8 11/8 1250 7100 WINCHESTER 209 SR7625 23. 0 FED. 12S3 11/8 1100 5400 WINCHESTER 209 SR7625 24. 5 FED. 12S3 11/8 1155 6200 WINCHESTER 209 SR7625 25. 5 FED. 12S3 11/8 1195 6700 WINCHESTER 209 SR7625 27. 0 FED. 12S3 11/8 1255 7500

CCI 209 “HI-SKOR” 800-X 21.5 WIN . WAA12 11/8 1105 5200 CCI 209 “HI-SKOR” 800-X 22.5 WIN . WAA12 11/8 1145 5600

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

CCI 209 “HI-SKOR” 800-X 24.0 WIN . WAA12 11/8 1200 6300 CCI 209 “HI-SKOR” 800-X 25.5 WIN . WAA12 11/8 1265 7100 CCI 209 “HI-SKOR” 800-X 22.5 WT W WINDJ AM ME R 11/8 1100 4200

LEAD MUZZLE CHAMBER

12 GAUGE 23⁄4 INCH 1 1/8 OUNCE LOADS (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: FEDERAL PLASTIC GOLD MEDAL, TOP GUN, MULTI PURPOSE

CCI 209 “HI-SKOR” 800-X 23.5 WT W WINDJ AM ME R 11/8 1145 4800 CCI 209 “HI-SKOR” 800-X 25.0 WT W WINDJ AM ME R 11/8 1205 5700 CCI 209 “HI-SKOR” 800-X 26.0 WT W WINDJ AM ME R 11/8 1250 6300 CCI 209 “HI-SKOR” 800-X 21.5 CB CB2118-12 11/8 1095 5000 CCI 209 “HI-SKOR” 800-X 23.0 CB CB2118-12 11/8 1145 5500 CCI 209 “HI-SKOR” 800-X 24.5 CB CB2118-12 11/8 1205 6200 CCI 209 “HI-SKOR” 800-X 26.0 CB CB2118-12 11/8 1265 6800 CCI 209 “HI-SKOR” 800-X 21.0 REM . FIG 8 11/8 1105 5500 CCI 209 “HI-SKOR” 800-X 22.5 REM . FIG 8 11/8 1150 5900 CCI 209 “HI-SKOR” 800-X 24.0 REM . FIG 8 11/8 1200 6300 CCI 209 “HI-SKOR” 800-X 26.0 REM . FIG 8 11/8 1260 6900 CCI 209 “HI-SKOR” 800-X 21.0 FED. 12S3 11 / 8 1095 5800 CCI 209 “HI-SKOR” 800-X 22.5 FED. 12S3 11 / 8 1155 6400 CCI 209 “HI-SKOR” 800-X 24.0 FED. 12S3 11 / 8 1200 6800 CCI 209 “HI-SKOR” 800-X 26.0 FED. 12S3 11 / 8 1260 7300

FEDERAL 209A “HI-SKOR” 800-X 20.5 WI N. WAA12 11/8 1100 5800 FEDERAL 209A “HI-SKOR” 800-X 21.5 WI N. WAA12 11/8 1140 6300 FEDERAL 209A “HI-SKOR” 800-X 23.0 WI N. WAA12 11/8 1195 7000 FEDERAL 209A “HI-SKOR” 800-X 24.5 WI N. WAA12 11/8 1255 7700 FEDERAL 209A “HI-SKOR” 800-X 22.0 WT W WIND JA MM ER 11/8 1100 4900 FEDERAL 209A “HI-SKOR” 800-X 23.0 WT W WIND JA MM ER 11/8 1145 5400 FEDERAL 209A “HI-SKOR” 800-X 24.0 WT W WIND JA MM ER 11/8 1190 5900 FEDERAL 209A “HI-SKOR” 800-X 25.5 WT W WIND JA MM ER 11/8 1260 6700 FEDERAL 209A “HI-SKOR” 800-X 20.5 CB CB2118-12 11/8 1090 5500 FEDERAL 209A “HI-SKOR” 800-X 22.5 CB CB2118-12 11/8 1150 6200 FEDERAL 209A “HI-SKOR” 800-X 23.0 CB CB2118-12 11/8 1195 6700 FEDERAL 209A “HI-SKOR” 800-X 24.5 CB CB2118-12 11/8 1250 7400 FEDERAL 209A “HI-SKOR” 800-X 21.0 REM . FIG8 11/8 1100 5400 FEDERAL 209A “HI-SKOR” 800-X 22.5 REM . FIG8 11/8 1155 6000 FEDERAL 209A “HI-SKOR” 800-X 24.0 REM . FIG8 11/8 1205 6600 FEDERAL 209A “HI-SKOR” 800-X 25.5 REM . FIG8 11/8 1255 7100 FEDERAL 209A “HI-SKOR” 800-X 20.5 FED. 12S3 11 /8 1090 5700 FEDERAL 209A “HI-SKOR” 800-X 22.0 FED. 12S3 11 /8 1155 6400 FEDERAL 209A “HI-SKOR” 800-X 23.0 FED. 12S3 11 /8 1195 6900 FEDERAL 209A “HI-SKOR” 800-X 25.0 FED. 12S3 11 /8 1265 7700

WINCHESTER 209 “HI-SKOR” 800-X 20.5 WIN. WAA12 11/8 1100 5800 WINCHESTER 209 “HI-SKOR” 800-X 21.5 WIN. WAA12 11/8 1140 6300 WINCHESTER 209 “HI-SKOR” 800-X 23.0 WIN. WAA12 11/8 1195 7000 WINCHESTER 209 “HI-SKOR” 800-X 25.0 WIN. WAA12 11/8 1265 7700 WINCHESTER 209 “HI-SKOR” 800-X 22.0 WTW. WINDJA MM ER 11/8 1105 4900 WINCHESTER 209 “HI-SKOR” 800-X 23.0 WTW. WINDJA MM ER 11/8 1150 5400 WINCHESTER 209 “HI-SKOR” 800-X 24.0 WTW. WINDJA MM ER 11/8 1190 5900 WINCHESTER 209 “HI-SKOR” 800-X 25.5 WTW. WINDJA MM ER 11/8 1255 6700 WINCHESTER 209 “HI-SKOR” 800-X 20.5 CB. CB2118-12 11/8 1095 5500 WINCHESTER 209 “HI-SKOR” 800-X 22.0 CB. CB2118-12 11/8 1145 6000 WINCHESTER 209 “HI-SKOR” 800-X 23.5 CB. CB2118-12 11/8 1200 6700 WINCHESTER 209 “HI-SKOR” 800-X 25.0 CB. CB2118-12 11/8 1260 7400 WINCHESTER 209 “HI-SKOR” 800-X 21.0 REM. FIG8 11/8 1100 5400 WINCHESTER 209 “HI-SKOR” 800-X 22.0 REM. FIG8 11/8 1140 5900 WINCHESTER 209 “HI-SKOR” 800-X 23.5 REM. FIG8 11/8 1200 6500 WINCHESTER 209 “HI-SKOR” 800-X 25.0 REM. FIG8 11/8 1255 7100 WINCHESTER 209 “HI-SKOR” 800-X 20.5 FED. 12S3 11/8 1095 5700 WINCHESTER 209 “HI-SKOR” 800-X 22.0 FED. 12S3 11/8 1155 6300 WINCHESTER 209 “HI-SKOR” 800-X 23.0 FED. 12S3 11/8 1195 6800 WINCHESTER 209 “HI-SKOR” 800-X 24.5 FED. 12S3 11/8 1250 7500

LEAD MUZZLE CHAMBER

SHELL: REMINGTON PREMIER, RTL, STS, NITRO 27

FEDERAL 209A “HI-SKOR” 700-X 15.0 WI N. WAA12 11/8 1100 9500 FEDERAL 209A “HI-SKOR” 700-X 16.5 WI N. WAA12 11/8 1160 10900 FEDERAL 209A “HI-SKOR” 700-X 15.5 WT W. WINDJ AM ME R 11/8 1110 8400 FEDERAL 209A “HI-SKOR” 700-X 16.5 WT W. WINDJ AM ME R 11/8 1155 9500 FEDERAL 209A “HI-SKOR” 700-X 17.5 WT W. WINDJ AM ME R 11/8 1200 10400 FEDERAL 209A “HI-SKOR” 700-X 18.5 WT W. WINDJ AM ME R 11/8 1240 11100 FEDERAL 209A “HI-SKOR” 700-X 15.5 CB. CB1118-12 11/8 1110 8500 FEDERAL 209A “HI-SKOR” 700-X 16.5 CB. CB1118-12 11/8 1160 9700 FEDERAL 209A “HI-SKOR” 700-X 17.5 CB. CB1118-12 11/8 1200 10800 FEDERAL 209A “HI-SKOR” 700-X 15.5 REM . FIG8 11/8 1105 8900

NOTE - ALL DATA SHOWN IS FOR LEAD SHOT. DO NOT ATTEMPT TO LOAD WITH STEEL SHOT AS DANGEROUS LOADS MAY RESULT.

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

12 GAUGE 23⁄4 INCH 1 1/8 OUNCE LOADS (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: REMINGTON PREMIER, RTL, STS, NITRO 27

FEDERAL 209A “HI-SKOR” 700-X 16.5 REM . FIG8 11/8 1150 10000 FEDERAL 209A “HI-SKOR” 700-X 17.5 REM . FIG8 11/8 1195 11000 FEDERAL 209A “HI-SKOR” 700-X 15.0 FED. 12S3 11 /8 1095 9300 FEDERAL 209A “HI-SKOR” 700-X 16.0 FED. 12S3 11 /8 1135 10200 FEDERAL 209A “HI-SKOR” 700-X 17.5 FED. 12S3 11 /8 1200 11500

REMINGTON 209P “HI-SKOR” 700-X 15.0 WI N. WAA12 11/8 1090 8500 REMINGTON 209P “HI-SKOR” 700-X 16.0 WI N. WAA12 11/8 1140 9600 REMINGTON 209P “HI-SKOR” 700-X 17.5 WI N. WAA12 11/8 1205 11200 REMINGTON 209P “HI-SKOR” 700-X 15.5 WT W. WINDJ AM ME R 11/8 1090 7600 REMINGTON 209P “HI-SKOR” 700-X 16.5 WT W. WINDJ AM ME R 11/8 1135 8400 REMINGTON 209P “HI-SKOR” 700-X 18.0 WT W. WINDJ AM ME R 11/8 1200 9600 REMINGTON 209P “HI-SKOR” 700-X 19.0 WT W. WINDJ AM ME R 11/8 1245 10500 REMINGTON 209P “HI-SKOR” 700-X 15.5 CB. CB1118-12 11/8 1110 8000 REMINGTON 209P “HI-SKOR” 700-X 16.5 CB. CB1118-12 11/8 1155 8900

REMINGTON 209P “HI-SKOR” 700-X 17.5 CB. CB1118-12 11/8 1195 9800 REMINGTON 209P “HI-SKOR” 700-X 19.0 CB. CB1118-12 11/8 1250 11100

REMINGTON 209P “HI-SKOR” 700-X 15.5 REM . FIG8 11/8 1095 8100 REMINGTON 209P “HI-SKOR” 700-X 16.5 REM . FIG8 11/8 1140 9000 REMINGTON 209P “HI-SKOR” 700-X 18.0 REM . FIG8 11/8 1205 10400 REMINGTON 209P “HI-SKOR” 700-X 19.0 REM . FIG8 11/8 1250 11300 REMINGTON 209P “HI-SKOR” 700-X 15.0 FED. 12S3 11 /8 1095 8900 REMINGTON 209P “HI-SKOR” 700-X 16.5 FED. 12S3 11 /8 1150 10200 REMINGTON 209P “HI-SKOR” 700-X 17.5 FED. 12S3 11 /8 1195 11100

WINCHESTER 209 “HI-SKOR” 700-X 15.5 WIN. WAA12 11/8 1105 9300 WINCHESTER 209 “HI-SKOR” 700-X 16.5 WIN. WAA12 11/8 1145 10200 WINCHESTER 209 “HI-SKOR” 700-X 17.5 WIN. WAA12 11/8 1190 11200 WINCHESTER 209 “HI-SKOR” 700-X 15.5 WTW. WINDJA MM ER 11/8 1100 8000 WINCHESTER 209 “HI-SKOR” 700-X 16.5 WTW. WINDJA MM ER 11/8 1150 8900 WINCHESTER 209 “HI-SKOR” 700-X 17.5 WTW. WINDJA MM ER 11/8 1190 9800 WINCHESTER 209 “HI-SKOR” 700-X 19.0 WTW. WINDJA MM ER 11/8 1255 11100 WINCHESTER 209 “HI-SKOR” 700-X 15.5 CB. CB1118-12 11/8 1095 7700 WINCHESTER 209 “HI-SKOR” 700-X 16.5 CB. CB1118-12 11/8 1145 8700 WINCHESTER 209 “HI-SKOR” 700-X 17.5 CB. CB1118-12 11/8 1190 9800 WINCHESTER 209 “HI-SKOR” 700-X 19.0 CB. CB1118-12 11/8 1250 11400 WINCHESTER 209 “HI-SKOR” 700-X 15.5 REM. FIG8 11/8 1095 8500 WINCHESTER 209 “HI-SKOR” 700-X 16.5 REM. FIG8 11/8 1140 9400 WINCHESTER 209 “HI-SKOR” 700-X 18.0 REM. FIG8 11/8 1205 10800 WINCHESTER 209 “HI-SKOR” 700-X 15.5 FED. 12S3 11/8 1100 9000 WINCHESTER 209 “HI-SKOR” 700-X 16.5 FED. 12S3 11/8 1145 9800 WINCHESTER 209 “HI-SKOR” 700-X 17.5 FED. 12S3 11/8 1190 10900

FEDERAL 209A PB 18.5 WIN. WAA12 11/8 1100 8200 FEDERAL 209A PB 20.0 WIN. WAA12 11/8 1155 9200 FEDERAL 209A PB 21.0 WIN. WAA12 11/8 1190 9900 FEDERAL 209A PB 23.0 WIN. WAA12 11/8 1260 11000 FEDERAL 209A PB 19.5 WTW. WINDJAMMER 11/8 1100 6800 FEDERAL 209A PB 20.5 WTW. WINDJAMMER 11/8 1145 7500 FEDERAL 209A PB 22.0 WTW. WINDJAMMER 11/8 1200 8500 FEDERAL 209A PB 23.5 WTW. WINDJAMMER 11/8 1260 9500 FEDERAL 209A PB 19.0 CB. CB1118-12 11/8 1100 7300 FEDERAL 209A PB 20.5 CB. CB1118-12 11/8 1150 7900 FEDERAL 209A PB 22.0 CB. CB1118-12 11/8 1205 8700 FEDERAL 209A PB 23.5 CB. CB1118-12 11/8 1260 9500 FEDERAL 209A PB 19.5 REM. FIG8 11/ 8 1110 7500 FEDERAL 209A PB 20.5 REM. FIG8 11/ 8 1150 8100 FEDERAL 209A PB 22.0 REM. FIG8 11/ 8 1200 8900 FEDERAL 209A PB 23.5 REM. FIG8 11/ 8 1255 9600 FEDERAL 209A PB 18.5 FED. 12S4 11 / 8 1105 8400 FEDERAL 209A PB 19.5 FED. 12S4 11 / 8 1140 8800 FEDERAL 209A PB 21.0 FED. 12S4 11 / 8 1190 9600 FEDERAL 209A PB 23.0 FED. 12S4 11 / 8 1265 10900

REMINGTON 209P PB 19.5 WIN. WAA12 11/8 1105 7300 REMINGTON 209P PB 20.5 WIN. WAA12 11/8 1145 8000 REMINGTON 209P PB 22.0 WIN. WAA12 11/8 1200 8700 REMINGTON 209P PB 23.5 WIN. WAA12 11/8 1255 9500 REMINGTON 209P PB 20.0 WTW. WINDJAMMER 11/8 1100 6300 REMINGTON 209P PB 21.0 WTW. WINDJAMMER 11/8 1140 6900 REMINGTON 209P PB 22.5 WTW. WINDJAMMER 11/8 1205 7900 REMINGTON 209P PB 24.0 WTW. WINDJAMMER 11/8 1265 8900

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

REMINGTON 209P PB 19.5 CB. CB1118-12 11/8 1090 6400

LEAD MUZZLE CHAMBER

NOTE - ALL DATA SHOWN IS FOR LEAD SHOT. DO NOT ATTEMPT TO LOAD WITH STEEL SHOT AS DANGEROUS LOADS MAY RESULT.

12 GAUGE 23⁄4 INCH 1 1/8 OUNCE LOADS (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: REMINGTON PREMIER, RTL, STS, NITRO 27

REMINGTON 209P PB 21.0 CB. CB1118-12 11/8 1150 7400 REMINGTON 209P PB 22.5 CB. CB1118-12 11/8 1200 8000

REMINGTON 209P PB 24.0 CB. CB1118-12 11/8 1250 8600 REMINGTON 209P PB 20.0 REM. FIG8 11/ 8 1100 6800 REMINGTON 209P PB 21.5 REM. FIG8 11/ 8 1150 7500 REMINGTON 209P PB 23.0 REM. FIG8 11/ 8 1205 8400 REMINGTON 209P PB 24.5 REM. FIG8 11/ 8 1260 9300 REMINGTON 209P PB 19.0 FED. 12S4 11 / 8 1100 7700 REMINGTON 209P PB 20.0 FED. 12S4 11 / 8 1140 8400 REMINGTON 209P PB 21.5 FED. 12S4 11 / 8 1195 9300 REMINGTON 209P PB 23.0 FED. 12S4 11 / 8 1245 10000

WINCHESTER 209 PB 19.0 WIN. WAA12 11/8 1100 7700 WINCHESTER 209 PB 20.0 WIN. WAA12 11/8 1140 8400 WINCHESTER 209 PB 22.0 WIN. WAA12 11/8 1205 9400 WINCHESTER 209 PB 23.5 WIN. WAA12 11/8 1255 10200 WINCHESTER 209 PB 20.0 WTW. WINDJAMM E R 11/8 1105 6700 WINCHESTER 209 PB 21.0 WTW. WINDJAM ME R 11/8 1145 7300 WINCHESTER 209 PB 22.5 WTW. WINDJAMM E R 11/8 1205 8200 WINCHESTER 209 PB 24.0 WTW. WINDJAMM E R 11/8 1260 9100 WINCHESTER 209 PB 20.0 CB. CB1118-12 11/8 1100 6700 WINCHESTER 209 PB 21.0 CB. CB1118-12 11/8 1140 7200 WINCHESTER 209 PB 22.5 CB. CB1118-12 11/8 1200 8000 WINCHESTER 209 PB 24.0 CB. CB1118-12 11/8 1255 8800 WINCHESTER 209 PB 19.5 REM. FIG8 11/8 1095 6900 WINCHESTER 209 PB 21.0 REM. FIG8 11/8 1155 7900 WINCHESTER 209 PB 22.0 REM. FIG8 11/8 1190 8400 WINCHESTER 209 PB 23.5 REM. FIG8 11/8 1250 9300 WINCHESTER 209 PB 19.0 FED. 12S4 11/ 8 1095 7700 WINCHESTER 209 PB 20.5 FED. 12S4 11/ 8 1155 8500 WINCHESTER 209 PB 21.5 FED. 12S4 11/ 8 1190 9100 WINCHESTER 209 PB 23.5 FED. 12S4 11/ 8 1260 10400

LEAD MUZZLE CHAMBER

FEDERAL 209A SR7625 19.5 WIN. WAA12 11/8 1100 7900 FEDERAL 209A SR7625 20.5 WIN. WAA12 11/8 1140 8500 FEDERAL 209A SR7625 22.0 WIN. WAA12 11/8 1205 9700 FEDERAL 209A SR7625 23.0 WIN. WAA12 11/8 1245 10500 FEDERAL 209A SR7625 21.0 WTW. WINDJAMMER 11 /8 1105 6500 FEDERAL 209A SR7625 22.0 WTW. WINDJAMMER 11 /8 1150 7200 FEDERAL 209A SR7625 23.5 WTW. WINDJAMMER 11 /8 1205 7800 FEDERAL 209A SR7625 25.0 WTW. WINDJAMMER 11 /8 1255 8400 FEDERAL 209A SR7625 20.0 CB. CB1118-12 1 1/8 1090 6900 FEDERAL 209A SR7625 21.5 CB. CB1118-12 1 1/8 1150 7900 FEDERAL 209A SR7625 22.5 CB. CB1118-12 1 1/8 1190 8400 FEDERAL 209A SR7625 24.0 CB. CB1118-12 1 1/8 1250 9200 FEDERAL 209A SR7625 20.5 REM. RXP12 11/8 1095 7200 FEDERAL 209A SR7625 22.0 REM. RXP12 11/8 1155 8000 FEDERAL 209A SR7625 23.0 REM. RXP12 11/8 1190 8600 FEDERAL 209A SR7625 24.5 REM. RXP12 11/8 1250 9400 FEDERAL 209A SR7625 20.0 FED. 12S3 1 1/ 8 1095 7300 FEDERAL 209A SR7625 21.0 FED. 12S3 1 1/ 8 1140 8100 FEDERAL 209A SR7625 22.5 FED. 12S3 1 1/ 8 1195 9100 FEDERAL 209A SR7625 24.0 FED. 12S3 1 1/ 8 1250 10000

REMINGTON 209P SR7625 20.0 WIN. WAA12 11/8 1090 7100 REMINGTON 209P SR7625 21.5 WIN. WAA12 11/8 1150 8000 REMINGTON 209P SR7625 23.0 WIN. WAA12 11/8 1200 8700 REMINGTON 209P SR7625 24.5 WIN. WAA12 11/8 1255 9400 REMINGTON 209P SR7625 21.5 WTW. WINDJAMMER 11 /8 1095 6000 REMINGTON 209P SR7625 23.0 WTW. WINDJAMMER 11 /8 1150 6700 REMINGTON 209P SR7625 24.0 WTW. WINDJAMMER 11/8 1195 7300 REMINGTON 209P SR7625 25.5 WTW. WINDJAMMER 11 /8 1260 8400 REMINGTON 209P SR7625 20.5 CB. CB1118-12 1 1/8 1095 6400 REMINGTON 209P SR7625 22.0 CB. CB1118-12 1 1/8 1155 7400 REMINGTON 209P SR7625 23.0 CB. CB1118-12 1 1/8 1195 8000 REMINGTON 209P SR7625 24.5 CB. CB1118-12 1 1/8 1250 8800 REMINGTON 209P SR7625 21.0 REM. RXP12 11/8 1095 6500 REMINGTON 209P SR7625 22.5 REM. RXP12 11/8 1150 7400 REMINGTON 209P SR7625 24.0 REM. RXP12 11/8 1205 8200

NOTE - ALL DATA SHOWN IS FOR LEAD SHOT. DO NOT ATTEMPT TO LOAD WITH STEEL SHOT AS DANGEROUS LOADS MAY RESULT.

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

12 GAUGE 23⁄4 INCH 1 1/8 OUNCE LOADS (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: REMINGTON PREMIER, RTL, STS, NITRO 27

REMINGTON 209P SR7625 25.5 REM. RXP12 11/8 1250 9000 REMINGTON 209P SR7625 21.0 FED. 12S3 1 1/ 8 1110 7200 REMINGTON 209P SR7625 22.0 FED. 12S3 1 1/ 8 1150 7800 REMINGTON 209P SR7625 23.5 FED. 12S3 1 1/ 8 1210 8700 REMINGTON 209P SR7625 24.5 FED. 12S3 1 1/ 8 1250 9500

WINCHESTER 209 SR7625 20. 5 WIN. WAA12 11/8 1090 7000 WINCHESTER 209 SR7625 22. 0 WIN. WAA12 11/8 1155 7900 WINCHESTER 209 SR7625 23. 0 WIN. WAA12 11/8 1195 8600 WINCHESTER 209 SR7625 24. 5 WIN. WAA12 11/8 1250 9500 WINCHESTER 209 SR7625 21. 5 WTW. WINDJAMMER 11/8 1095 5900 WINCHESTER 209 SR7625 22. 5 WTW. WINDJAMMER 11/8 1140 6500 WINCHESTER 209 SR7625 24. 0 WTW. WINDJAMMER 11/8 1205 7700 WINCHESTER 209 SR7625 25. 0 WTW. WINDJAMMER 11/8 1250 8500 WINCHESTER 209 SR7625 21. 0 CB. CB1118-12 11/8 1090 6200 WINCHESTER 209 SR7625 22. 5 CB. CB1118-12 11/8 1155 7200 WINCHESTER 209 SR7625 23. 0 CB. CB1118-12 11/8 1200 7600 WINCHESTER 209 SR7625 24. 5 CB. CB1118-12 11/8 1245 8600 WINCHESTER 209 SR7625 21. 0 REM. RXP12 11/8 1090 6200 WINCHESTER 209 SR7625 22. 5 REM. RXP12 11/8 1155 7400 WINCHESTER 209 SR7625 23. 5 REM. RXP12 11/8 1195 7900 WINCHESTER 209 SR7625 25. 0 REM. RXP12 11/8 1250 8800 WINCHESTER 209 SR7625 20. 5 FED. 12S3 11/8 1090 6700 WINCHESTER 209 SR7625 22. 0 FED. 12S3 11/8 1145 7800 WINCHESTER 209 SR7625 23. 5 FED. 12S3 11/8 1205 8800 WINCHESTER 209 SR7625 24. 5 FED. 12S3 11/8 1255 9600

CCI 209 “HI-SKOR” 800-X 19.5 WIN . WAA12 11/8 1105 6900 CCI 209 “HI-SKOR” 800-X 20.5 WIN . WAA12 11/8 1150 7500 CCI 209 “HI-SKOR” 800-X 21.5 WIN . WAA12 11/8 1190 8200 CCI 209 “HI-SKOR” 800-X 23.0 WIN . WAA12 11/8 1255 9100 CCI 209 “HI-SKOR” 800-X 20.0 WT W WINDJ AM ME R 11/8 1095 6000 CCI 209 “HI-SKOR” 800-X 21.0 WT W WINDJ AM ME R 11/8 1145 6700 CCI 209 “HI-SKOR” 800-X 22.0 WT W WINDJ AM ME R 11/8 1195 7300 CCI 209 “HI-SKOR” 800-X 23.5 WT W WINDJ AM ME R 11/8 1250 8200 CCI 209 “HI-SKOR” 800-X 19.5 CB CB1118-12 11/8 1095 6200 CCI 209 “HI-SKOR” 800-X 21.0 CB CB1118-12 11/8 1155 7000 CCI 209 “HI-SKOR” 800-X 22.0 CB CB1118-12 11/8 1195 7500 CCI 209 “HI-SKOR” 800-X 23.5 CB CB1118-12 11/8 1255 8400 CCI 209 “HI-SKOR” 800-X 19.5 REM. FIG8 11/8 1095 6500 CCI 209 “HI-SKOR” 800-X 21.0 REM. FIG8 11/8 1155 7200 CCI 209 “HI-SKOR” 800-X 22.0 REM. FIG8 11/8 1190 7600 CCI 209 “HI-SKOR” 800-X 24.0 REM. FIG8 11/8 1265 8700 CCI 209 “HI-SKOR” 800-X 19.5 FED. 12S3 11 / 8 1100 7000 CCI 209 “HI-SKOR” 800-X 20.5 FED. 12S3 11 / 8 1140 7600 CCI 209 “HI-SKOR” 800-X 22.0 FED. 12S3 11 / 8 1200 8500 CCI 209 “HI-SKOR” 800-X 23.5 FED. 12S3 11 / 8 1260 9400

FEDERAL 209A “HI-SKOR” 800-X 19.0 WI N. WAA12 11/8 1095 7200 FEDERAL 209A “HI-SKOR” 800-X 20.0 WI N. WAA12 11/8 1145 8000 FEDERAL 209A “HI-SKOR” 800-X 21.0 WI N. WAA12 11/8 1190 8700 FEDERAL 209A “HI-SKOR” 800-X 22.5 WI N. WAA12 11/8 1250 9700 FEDERAL 209A “HI-SKOR” 800-X 20.0 WT W WIND JA MM ER 11/8 1110 6500 FEDERAL 209A “HI-SKOR” 800-X 21.0 WT W WIND JA MM ER 11/8 1160 7200 FEDERAL 209A “HI-SKOR” 800-X 22.0 WT W WIND JA MM ER 11/8 1205 7900 FEDERAL 209A “HI-SKOR” 800-X 23.0 WT W WIND JA MM ER 11/8 1250 8600 FEDERAL 209A “HI-SKOR” 800-X 19.5 CB CB1118-12 11/8 1105 6800 FEDERAL 209A “HI-SKOR” 800-X 20.5 CB CB1118-12 11/8 1150 7500 FEDERAL 209A “HI-SKOR” 800-X 21.5 CB CB1118-12 11/8 1200 8200 FEDERAL 209A “HI-SKOR” 800-X 23.0 CB CB1118-12 11/8 1250 9000 FEDERAL 209A “HI-SKOR” 800-X 19.5 REM . FIG8 11/8 1100 6900 FEDERAL 209A “HI-SKOR” 800-X 20.5 REM . FIG8 11/8 1140 7500 FEDERAL 209A “HI-SKOR” 800-X 22.0 REM . FIG8 11/8 1200 8400 FEDERAL 209A “HI-SKOR” 800-X 23.5 REM . FIG8 11/8 1260 9200 FEDERAL 209A “HI-SKOR” 800-X 19.0 FED. 12S3 11 /8 1100 7300 FEDERAL 209A “HI-SKOR” 800-X 20.0 FED. 12S3 11 /8 1140 8000 FEDERAL 209A “HI-SKOR” 800-X 21.5 FED. 12S3 11 /8 1205 9000 FEDERAL 209A “HI-SKOR” 800-X 23.0 FED. 12S3 11 /8 1260 9900

WINCHESTER 209 “HI-SKOR” 800-X 19.0 WIN. WAA12 11/8 1090 6900 WINCHESTER 209 “HI-SKOR” 800-X 20.0 WIN. WAA12 11/8 1140 7800 WINCHESTER 209 “HI-SKOR” 800-X 21.0 WIN. WAA12 11/8 1190 8600 WINCHESTER 209 “HI-SKOR” 800-X 22.5 WIN. WAA12 11/8 1250 9600

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

WINCHESTER 209 “HI-SKOR” 800-X 20.0 WTW WINDJ AM ME R 11/8 1095 6200 WINCHESTER 209 “HI-SKOR” 800-X 21.0 WTW WINDJ AM ME R 11/8 1145 6900 WINCHESTER 209 “HI-SKOR” 800-X 22.0 WTW WINDJ AM ME R 11/8 1190 7500

LEAD MUZZLE CHAMBER

12 GAUGE 23⁄4 INCH 1 1/8 OUNCE LOADS (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: REMINGTON PREMIER, RTL, STS, NITRO 27

WINCHESTER 209 “HI-SKOR” 800-X 23.5 WTW WINDJ AM ME R 11/8 1250 8400 WINCHESTER 209 “HI-SKOR” 800-X 19.5 CB CB1118-12 11/8 1100 6500 WINCHESTER 209 “HI-SKOR” 800-X 20.5 CB CB1118-12 11/8 1145 7200 WINCHESTER 209 “HI-SKOR” 800-X 21.5 CB CB1118-12 11/8 1190 7800 WINCHESTER 209 “HI-SKOR” 800-X 23.0 CB CB1118-12 11/8 1250 8700 WINCHESTER 209 “HI-SKOR” 800-X 19.5 REM. FIG8 11/8 1095 6500 WINCHESTER 209 “HI-SKOR” 800-X 20.5 REM. FIG8 11/8 1140 7200 WINCHESTER 209 “HI-SKOR” 800-X 22.0 REM. FIG8 11/8 1205 8100

WINCHESTER 209 “HI-SKOR” 800-X 23.5 REM. FIG8 11/8 1265 8900 WINCHESTER 209 “HI-SKOR” 800-X 19.0 FED. 12S3 11/8 1090 6800 WINCHESTER 209 “HI-SKOR” 800-X 20.0 FED. 12S3 11/8 1135 7500 WINCHESTER 209 “HI-SKOR” 800-X 21.5 FED. 12S3 11/8 1205 8500 WINCHESTER 209 “HI-SKOR” 800-X 23.0 FED. 12S3 11/8 1260 9600

SHELL: REMINGTON GUN CLUB

CHEDDITE 209 HI-SKOR 700X 16.0 FED. 12S3 11/8 1144 10300 CHEDDITE 209 HI-SKOR 700X 16.5 REM. FIG8 11/8 1143 9600 CHEDDITE 209 HI-SKOR 700X 18.0 REM. FIG8 11/8 1204 10600 CHEDDITE 209 HI-SKOR 700X 16.0 WIN . WAA12 11/8 1146 10200 CHEDDITE 209 HI-SKOR 700X 17.5 WIN . WAA12 11/8 1204 11400

REMINGTON STSHI-SKOR 700X 16.0 FED. 12S3 11/8 1148 10700 REMINGTON STSHI-SKOR 700X 16.5 REM. FIG8 11/8 1147 9400 REMINGTON STSHI-SKOR 700X 17.5 REM. FIG8 11/8 1198 10700 REMINGTON STSHI-SKOR 700X 16.0 WIN. WAA12 11/8 1149 10200 REMINGTON STSHI-SKOR 700X 17.0 WIN. WAA12 11/8 1199 11300

LEAD MUZZLE CHAMBER

SHELL: WINCHESTER AA

FEDERAL 209A “HI-SKOR” 700-X 15.0 WI N. WAA12 11/8 1090 9100 FEDERAL 209A “HI-SKOR” 700-X 16.0 WI N. WAA12 11/8 1135 10000 FEDERAL 209A “HI-SKOR” 700-X 17.5 WI N. WAA12 11/8 1200 11300 FEDERAL 209A “HI-SKOR” 700-X 15.0 WT W . WIN DJ AM MER 11/8 1095 8200 FEDERAL 209A “HI-SKOR” 700-X 16.0 WT W . WIN DJ AM MER 11/8 1140 9000 FEDERAL 209A “HI-SKOR” 700-X 17.5 WT W . WIN DJ AM MER 11/8 1200 10100 FEDERAL 209A “HI-SKOR” 700-X 19.0 WT W . WIN DJ AM MER 11/8 1255 11000 FEDERAL 209A “HI-SKOR” 700-X 15.0 CB. CB1118-12 11/8 1095 8500 FEDERAL 209A “HI-SKOR” 700-X 16.0 CB. CB1118-12 11/8 1140 9400 FEDERAL 209A “HI-SKOR” 700-X 17.5 CB. CB1118-12 11/8 1200 10700 FEDERAL 209A “HI-SKOR” 700-X 18.5 CB. CB1118-12 11/8 1245 11500 FEDERAL 209A “HI-SKOR” 700-X 15.5 REM . FIG8 11/8 1100 8900 FEDERAL 209A “HI-SKOR” 700-X 16.5 REM . FIG8 11/8 1145 9600 FEDERAL 209A “HI-SKOR” 700-X 18.0 REM . FIG8 11/8 1205 10600 FEDERAL 209A “HI-SKOR” 700-X 19.0 REM . FIG8 11/8 1240 11200 FEDERAL 209A “HI-SKOR” 700-X 15.5 FED. 12S3 11 /8 1100 9000 FEDERAL 209A “HI-SKOR” 700-X 16.5 FED. 12S3 11 /8 1145 9900 FEDERAL 209A “HI-SKOR” 700-X 18.0 FED. 12S3 11 /8 1205 11200

REMINGTON 209P “HI-SKOR” 700-X 15.5 WI N. WAA12 11/8 1095 8200 REMINGTON 209P “HI-SKOR” 700-X 17.0 WI N. WAA12 11/8 1150 9000 REMINGTON 209P “HI-SKOR” 700-X 18.5 WI N. WAA12 11/8 1205 9800 REMINGTON 209P “HI-SKOR” 700-X 20.0 WI N. WAA12 11/8 1260 10800 REMINGTON 209P “HI-SKOR” 700-X 16.0 WT W. WINDJ AM ME R 11/8 1090 6800 REMINGTON 209P “HI-SKOR” 700-X 17.5 WT W. WINDJ AM ME R 11/8 1145 7600 REMINGTON 209P “HI-SKOR” 700-X 19.0 WT W. WINDJ AM ME R 11/8 1195 8500 REMINGTON 209P “HI-SKOR” 700-X 20.5 WT W. WINDJ AM ME R 11/8 1245 9300 REMINGTON 209P “HI-SKOR” 700-X 15.5 CB. CB1118-12 11/8 1090 6900 REMINGTON 209P “HI-SKOR” 700-X 17.0 CB. CB1118-12 11/8 1150 7900 REMINGTON 209P “HI-SKOR” 700-X 18.0 CB. CB1118-12 11/8 1195 8900 REMINGTON 209P “HI-SKOR” 700-X 19.5 CB. CB1118-12 11/8 1255 10400 REMINGTON 209P “HI-SKOR” 700-X 16.0 REM . FIG8 11/8 1100 7900 REMINGTON 209P “HI-SKOR” 700-X 17.0 REM . FIG8 11/8 1145 8400 REMINGTON 209P “HI-SKOR” 700-X 18.5 REM . FIG8 11/8 1205 9500 REMINGTON 209P “HI-SKOR” 700-X 19.5 REM . FIG8 11/8 1250 10200 REMINGTON 209P “HI-SKOR” 700-X 15.5 FED. 12S3 11 /8 1090 7800 REMINGTON 209P “HI-SKOR” 700-X 16.5 FED. 12S3 11 /8 1135 8600 REMINGTON 209P “HI-SKOR” 700-X 18.0 FED. 12S3 11 /8 1190 9700 REMINGTON 209P “HI-SKOR” 700-X 19.5 FED. 12S3 11 /8 1250 10900

NOTE - ALL DATA SHOWN IS FOR LEAD SHOT. DO NOT ATTEMPT TO LOAD WITH STEEL SHOT AS DANGEROUS LOADS MAY RESULT.

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

12 GAUGE 23⁄4 INCH 1 1/8 OUNCE LOADS (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: WINCHESTER AA

WINCHESTER 209 “HI-SKOR” 700-X 15.5 WIN. WAA12 11/8 1105 9200 WINCHESTER 209 “HI-SKOR” 700-X 16.5 WIN. WAA12 11/8 1150 10100 WINCHESTER 209 “HI-SKOR” 700-X 17.5 WIN. WAA12 11/8 1190 10800 WINCHESTER 209 “HI-SKOR” 700-X 15.5 WTW. WINDJA MM ER 11/8 1110 8100 WINCHESTER 209 “HI-SKOR” 700-X 16.5 WTW. WINDJA MM ER 11/8 1150 8900 WINCHESTER 209 “HI-SKOR” 700-X 17.5 WTW. WINDJA MM ER 11/8 1195 9700 WINCHESTER 209 “HI-SKOR” 700-X 19.0 WTW. WINDJA MM ER 11/8 1250 11000 WINCHESTER 209 “HI-SKOR” 700-X 15.5 CB. CB1118-12 11/8 1105 8600 WINCHESTER 209 “HI-SKOR” 700-X 16.5 CB. CB1118-12 11/8 1150 9500 WINCHESTER 209 “HI-SKOR” 700-X 17.5 CB. CB1118-12 11/8 1195 10200 WINCHESTER 209 “HI-SKOR” 700-X 19.0 CB. CB1118-12 11/8 1255 11200 WINCHESTER 209 “HI-SKOR” 700-X 15.5 REM. FIG8 11/8 1090 8300 WINCHESTER 209 “HI-SKOR” 700-X 16.5 REM. FIG8 11/8 1135 9000 WINCHESTER 209 “HI-SKOR” 700-X 18.0 REM. FIG8 11/8 1200 10200 WINCHESTER 209 “HI-SKOR” 700-X 19.5 REM. FIG8 11/8 1255 11400 WINCHESTER 209 “HI-SKOR” 700-X 15.5 FED. 12S3 11/8 1100 9500 WINCHESTER 209 “HI-SKOR” 700-X 16.5 FED. 12S3 11/8 1150 10400 WINCHESTER 209 “HI-SKOR” 700-X 17.5 FED. 12S3 11/8 1190 11100

FEDERAL 209A PB 19.0 WIN. WAA12 11/8 1100 7500 FEDERAL 209A PB 20.5 WIN. WAA12 11/8 1150 8200 FEDERAL 209A PB 22.0 WIN. WAA12 11/8 1205 8900 FEDERAL 209A PB 23.5 WIN. WAA12 11/8 1260 9700 FEDERAL 209A PB 19.5 WTW. WINDJAMMER 11/8 1100 6400 FEDERAL 209A PB 21.0 WTW. WINDJAMMER 11/8 1155 7000 FEDERAL 209A PB 22.5 WTW. WINDJAMMER 11/8 1205 7800 FEDERAL 209A PB 24.0 WTW. WINDJAMMER 11/8 1260 8700 FEDERAL 209A PB 19.5 CB. CB1118-12 11/8 1105 6600 FEDERAL 209A PB 21.0 CB. CB1118-12 11/8 1155 7400 FEDERAL 209A PB 22.5 CB. CB1118-12 11/8 1205 7900 FEDERAL 209A PB 24.0 CB. CB1118-12 11/8 1255 8600 FEDERAL 209A PB 19.5 REM. RXP12 11/8 1105 7100 FEDERAL 209A PB 20.5 REM. RXP12 11/8 1140 7600 FEDERAL 209A PB 22.0 REM. RXP12 11/8 1195 8400 FEDERAL 209A PB 23.5 REM. RXP12 11/8 1250 9300 FEDERAL 209A PB 19.0 FED. 12S4 11 / 8 1100 7600 FEDERAL 209A PB 20.5 FED. 12S4 11 / 8 1150 8300 FEDERAL 209A PB 22.0 FED. 12S4 11 / 8 1200 9100 FEDERAL 209A PB 23.5 FED. 12S4 11 / 8 1255 10100

REMINGTON 209P PB 20.0 WIN. WAA12 11/8 1100 6500 REMINGTON 209P PB 21.0 WIN. WAA12 11/8 1140 7100 REMINGTON 209P PB 23.0 WIN. WAA12 11/8 1200 7700 REMINGTON 209P PB 24.5 WIN. WAA12 11/8 1260 8800 REMINGTON 209P PB 20.0 WTW. WINDJAMMER 11/8 1095 5700 REMINGTON 209P PB 21.5 WTW. WINDJAMMER 11/8 1145 6400 REMINGTON 209P PB 23.0 WTW. WINDJAMMER 11/8 1205 7300 REMINGTON 209P PB 24.5 WTW. WINDJAMMER 11/8 1255 7900 REMINGTON 209P PB 20.5 CB. CB1118-12 11/8 1100 5500 REMINGTON 209P PB 21.5 CB. CB1118-12 11/8 1140 6100 REMINGTON 209P PB 23.0 CB. CB1118-12 11/8 1200 7100 REMINGTON 209P PB 24.5 CB. CB1118-12 11/8 1250 7700 REMINGTON 209P PB 20.0 REM. RXP12 11/8 1100 6400 REMINGTON 209P PB 21.0 REM. RXP12 11/8 1140 7000 REMINGTON 209P PB 22.5 REM. RXP12 11/8 1200 8000 REMINGTON 209P PB 24.0 REM. RXP12 11/8 1255 8900 REMINGTON 209P PB 19.5 FED. 12S4 11 / 8 1095 6900 REMINGTON 209P PB 20.5 FED. 12S4 11 / 8 1140 7700 REMINGTON 209P PB 22.0 FED. 12S4 11 / 8 1195 8600 REMINGTON 209P PB 24.0 FED. 12S4 11 / 8 1260 9600

WINCHESTER 209 PB 19.5 WIN. WAA12 11/8 1095 6900 WINCHESTER 209 PB 21.0 WIN. WAA12 11/8 1150 7700 WINCHESTER 209 PB 22.5 WIN. WAA12 11/8 1205 8600 WINCHESTER 209 PB 24.0 WIN. WAA12 11/8 1265 9400 WINCHESTER 209 PB 20.0 WTW. WINDJAMM E R 11/8 1100 6200 WINCHESTER 209 PB 21.5 WTW. WINDJAMM E R 11/8 1155 6900 WINCHESTER 209 PB 23.0 WTW. WINDJAMM E R 11/8 1205 7400 WINCHESTER 209 PB 24.5 WTW. WINDJAMM E R 11/8 1260 8400 WINCHESTER 209 PB 20.0 CB. CB1118-12 11/8 1100 6300 WINCHESTER 209 PB 21.5 CB. CB1118-12 11/8 1155 7000 WINCHESTER 209 PB 23.0 CB. CB1118-12 11/8 1210 7900 WINCHESTER 209 PB 24.0 CB. CB1118-12 11/8 1250 8500

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

WINCHESTER 209 PB 20.0 REM. RXP12 11/8 1110 6900 WINCHESTER 209 PB 21.0 REM. RXP12 11/8 1155 7500 WINCHESTER 209 PB 22.5 REM. RXP12 11/8 1205 8500

NOTE - ALL DATA SHOWN IS FOR LEAD SHOT. DO NOT ATTEMPT TO LOAD WITH STEEL SHOT AS DANGEROUS LOADS MAY RESULT.

LEAD MUZZLE CHAMBER

12 GAUGE 23⁄4 INCH 1 1/8 OUNCE LOADS (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: WINCHESTER AA

WINCHESTER 209 PB 24.0 REM. RXP12 11/8 1265 9500 WINCHESTER 209 PB 19.5 FED. 12S4 11/ 8 1105 7400 WINCHESTER 209 PB 20.5 FED. 12S4 11/ 8 1145 8000 WINCHESTER 209 PB 22.0 FED. 12S4 11/ 8 1200 8900 WINCHESTER 209 PB 23.5 FED. 12S4 11/ 8 1255 9900

FEDERAL 209A SR7625 21.0 WIN. WAA12 11/8 1100 6800 FEDERAL 209A SR7625 22.5 WIN. WAA12 11/8 1155 7400 FEDERAL 209A SR7625 23.5 WIN. WAA12 11/8 1190 7900 FEDERAL 209A SR7625 25.5 WIN. WAA12 11/8 1260 9100 FEDERAL 209A SR7625 22.0 WTW. WINDJAMMER 11 /8 1095 5400 FEDERAL 209A SR7625 23.5 WTW. WINDJAMMER 11 /8 1155 6400 FEDERAL 209A SR7625 24.5 WTW. WINDJAMMER 11 /8 1200 7200 FEDERAL 209A SR7625 25.5 WTW. WINDJAMMER 11 /8 1245 7900 FEDERAL 209A SR7625 21.5 CB. CB1118-12 1 1/8 1105 6300 FEDERAL 209A SR7625 22.5 CB. CB1118-12 1 1/8 1145 6800 FEDERAL 209A SR7625 24.0 CB. CB1118-12 1 1/8 1195 7600 FEDERAL 209A SR7625 25.5 CB. CB1118-12 1 1/8 1250 8400 FEDERAL 209A SR7625 21.5 REM. RXP12 11/8 1095 6100 FEDERAL 209A SR7625 22.5 REM. RXP12 11/8 1140 6800 FEDERAL 209A SR7625 24.0 REM. RXP12 11/8 1195 7700 FEDERAL 209A SR7625 25.5 REM. RXP12 11/8 1250 8600 FEDERAL 209A SR7625 21.0 FED. 12S4 1 1/ 8 1100 6800 FEDERAL 209A SR7625 22.5 FED. 12S4 1 1/ 8 1155 7600 FEDERAL 209A SR7625 23.5 FED. 12S4 1 1/ 8 1195 8300 FEDERAL 209A SR7625 25.0 FED. 12S4 1 1/ 8 1255 9300

REMINGTON 209P SR7625 22.0 WIN. WAA12 11/8 1110 6000 REMINGTON 209P SR7625 23.0 WIN. WAA12 11/8 1145 6400 REMINGTON 209P SR7625 24.5 WIN. WAA12 11/8 1195 7200 REMINGTON 209P SR7625 26.0 WIN. WAA12 11/8 1255 8000 REMINGTON 209P SR7625 22.0 WTW. WINDJAMMER 11 /8 1095 5100 REMINGTON 209P SR7625 23.5 WTW. WINDJAMMER 11 /8 1150 5900 REMINGTON 209P SR7625 24.5 WTW. WINDJAMMER 11 /8 1190 6400 REMINGTON 209P SR7625 26.0 WTW. WINDJAMMER 11 /8 1250 7200 REMINGTON 209P SR7625 22.0 CB. CB1118-12 1 1/8 1105 5600 REMINGTON 209P SR7625 23.0 CB. CB1118-12 1 1/8 1145 6300 REMINGTON 209P SR7625 24.5 CB. CB1118-12 1 1/8 1205 7300 REMINGTON 209P SR7625 25.5 CB. CB1118-12 1 1/8 1250 8000 REMINGTON 209P SR7625 22.0 REM. RXP12 11/8 1105 5800 REMINGTON 209P SR7625 23.0 REM. RXP12 11/8 1145 6300 REMINGTON 209P SR7625 24.5 REM. RXP12 11/8 1205 7400 REMINGTON 209P SR7625 25.5 REM. RXP12 11/8 1250 8200 REMINGTON 209P SR7625 21.5 FED. 12S4 1 1/ 8 1100 6500 REMINGTON 209P SR7625 22.5 FED. 12S4 1 1/ 8 1145 7200 REMINGTON 209P SR7625 24.0 FED. 12S4 1 1/ 8 1205 8100 REMINGTON 209P SR7625 25.5 FED. 12S4 1 1/ 8 1255 9100

WINCHESTER 209 SR7625 21. 0 WIN. WAA12 1 1/8 1090 6400 WINCHESTER 209 SR7625 22. 5 WIN. WAA12 1 1/8 1150 7300 WINCHESTER 209 SR7625 23. 5 WIN. WAA12 1 1/8 1190 7900 WINCHESTER 209 SR7625 25. 5 WIN. WAA12 1 1/8 1265 9600 WINCHESTER 209 SR7625 22. 0 WTW. WINDJAMMER 1 1/8 1105 5700 WINCHESTER 209 SR7625 23. 0 WTW. WINDJAMMER 1 1/8 1140 6200 WINCHESTER 209 SR7625 24. 5 WTW. WINDJAMMER 1 1/8 1200 6900 WINCHESTER 209 SR7625 26. 0 WTW. WINDJAMMER 1 1/8 1255 7900 WINCHESTER 209 SR7625 21. 5 CB. CB1118-12 1 1/8 1100 6000 WINCHESTER 209 SR7625 22. 5 CB. CB1118-12 1 1/8 1145 6500 WINCHESTER 209 SR7625 24. 0 CB. CB1118-12 1 1/8 1195 7300 WINCHESTER 209 SR7625 26. 0 CB. CB1118-12 1 1/8 1265 8200 WINCHESTER 209 SR7625 22. 0 REM. RXP12 1 1/8 1105 6200 WINCHESTER 209 SR7625 23. 0 REM. RXP12 1 1/8 1145 6600 WINCHESTER 209 SR7625 24. 5 REM. RXP12 1 1/8 1200 7500 WINCHESTER 209 SR7625 26. 0 REM. RXP12 1 1/8 1255 8300 WINCHESTER 209 SR7625 21. 0 FED. 12S4 1 1/8 1095 6700 WINCHESTER 209 SR7625 22. 5 FED. 12S4 1 1/8 1145 7500 WINCHESTER 209 SR7625 24. 0 FED. 12S4 1 1/8 1200 8400 WINCHESTER 209 SR7625 25. 5 FED. 12S4 1 1/8 1260 9200

LEAD MUZZLE CHAMBER

NOTE - ALL DATA SHOWN IS FOR LEAD SHOT. DO NOT ATTEMPT TO LOAD WITH STEEL SHOT AS DANGEROUS LOADS MAY RESULT.

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

12 GAUGE 23⁄4 INCH 1 1/8 OUNCE LOADS (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: WINCHESTER AA

CCI 209 "HI-SKOR" 800-X 20.5 WIN . WAA12 1 1/8 1095 5800 CCI 209 "HI-SKOR" 800-X 22. 0 WIN. WAA12 1 1/8 1155 6500 CCI 209 "HI-SKOR" 800-X 23.0 WIN . WAA12 1 1/8 1195 7000 CCI 209 "HI-SKOR" 800-X 24.5 WIN . WAA12 1 1/8 1250 7700 CCI 209 "HI-SKOR" 800-X 21.5 WTW . WINDJ AMME R 1 1/8 1100 4800 CCI 209 "HI-SKOR" 800-X 22.5 WTW . WINDJ AMME R 1 1/8 1150 5400 CCI 209 "HI-SKOR" 800-X 24.0 WTW . WINDJ AMME R 1 1/8 1195 5800 CCI 209 "HI-SKOR" 800-X 26.0 WTW . WINDJ AMME R 1 1/8 1260 6200 CCI 209 "HI-SKOR" 800-X 21.0 CB. CB1118-12 1 1/8 1095 5000 CCI 209 "HI-SKOR" 800-X 22.5 CB. CB1118-12 1 1/8 1150 5400 CCI 209 "HI-SKOR" 800-X 24.0 CB. CB1118-12 1 1/8 1200 6100 CCI 209 "HI-SKOR" 800-X 25.5 CB. CB1118-12 1 1/8 1250 6700 CCI 209 "HI-SKOR" 800-X 21.0 REM. FIG8 1 1/8 1095 5200 CCI 209 "HI-SKOR" 800-X 22.0 REM. FIG8 1 1/8 1135 5700 CCI 209 "HI-SKOR" 800-X 23.5 REM. FIG8 1 1/8 1195 6300 CCI 209 "HI-SKOR" 800-X 25.5 REM. FIG8 1 1/8 1260 6900 CCI 209 "HI-SKOR" 800-X 20.5 FED. 12S3 1 1/8 1090 5800 CCI 209 "HI-SKOR" 800-X 22.0 FED. 12S3 1 1/8 1150 6400 CCI 209 "HI-SKOR" 800-X 23.0 FED. 12S3 1 1/8 1190 6800 CCI 209 "HI-SKOR" 800-X 24.5 FED. 12S3 1 1/8 1255 7800

FEDERAL 209A "HI-SKOR" 800-X 20. 0 WIN. WAA12 1 1/8 1105 6600 FEDERAL 209A "HI-SKOR" 800-X 21. 0 WIN. WAA12 1 1/8 1140 7000 FEDERAL 209A "HI-SKOR" 800-X 22. 5 WIN. WAA12 1 1/8 1200 7800 FEDERAL 209A "HI-SKOR" 800-X 24. 0 WIN. WAA12 1 1/8 1260 8600 FEDERAL 209A "HI-SKOR" 800-X 21. 0 WTW WINDJAMMER 1 1/ 8 1105 5100 FEDERAL 209A "HI-SKOR" 800-X 22. 0 WTW WINDJAMMER 1 1/ 8 1150 5800 FEDERAL 209A "HI-SKOR" 800-X 23. 0 WTW WINDJAMMER 1 1/ 8 1195 6500 FEDERAL 209A "HI-SKOR" 800-X 24. 5 WTW WINDJAMMER 1 1/ 8 1265 7600 FEDERAL 209A "HI-SKOR" 800-X 20.5 CB CB1118-2 1 1/8 1095 5600 FEDERAL 209A "HI-SKOR" 800-X 22.0 CB CB1118-2 1 1/8 1155 6300 FEDERAL 209A "HI-SKOR" 800-X 23.0 CB CB1118-2 1 1/8 1195 6800 FEDERAL 209A "HI-SKOR" 800-X 24.5 CB CB118-2 1 1/8 1250 7500 FEDERAL 209A "HI-SKOR" 800-X 20. 5 REM. FIG8 1 1/8 1090 5200 FEDERAL 209A "HI-SKOR" 800-X 21. 5 REM. FIG8 1 1/8 1135 5700 FEDERAL 209A "HI-SKOR" 800-X 23. 0 REM. FIG8 1 1/8 1200 6700 FEDERAL 209A "HI-SKOR" 800-X 24. 5 REM. RIG8 1 1/8 1260 7700 FEDERAL 209A "HI-SKOR" 800-X 19.5 FED. 12S3 1 1/8 1095 6400 FEDERAL 209A "HI-SKOR" 800-X 21.0 FED. 12S3 1 1/8 1150 7100 FEDERAL 209A "HI-SKOR" 800-X 22.5 FED. 12S3 1 1/8 1200 7800 FEDERAL 209A "HI-SKOR" 800-X 24.0 FED. 12S3 1 1/8 1255 8500

WINCHESTER 209 "HI-SKOR" 800-X 20.0 WIN . WAA12 1 1/8 1100 6600 WINCHESTER 209 "HI-SKOR" 800-X 21.0 WIN . WAA12 1 1/8 1145 7200 WINCHESTER 209 "HI-SKOR" 800-X 22.0 WIN . WAA12 1 1/8 1190 7800 WINCHESTER 209 "HI-SKOR" 800-X 24.0 WIN . WAA12 1 1/8 1265 8800 WINCHESTER 209 "HI-SKOR" 800-X 20.5 WTW WINDJ AMME R 1 1/8 1095 5400 WINCHESTER 209 "HI-SKOR" 800-X 21.5 WTW WINDJ AMME R 1 1/8 1145 6000 WINCHESTER 209 "HI-SKOR" 800-X 22.5 WTW WINDJ AMME R 1 1/8 1190 6700 WINCHESTER 209 "HI-SKOR" 800-X 24.0 WTW WINDJ AMME R 1 1/8 1260 7700 WINCHESTER 209 "HI-SKOR" 800-X 20.0 CB CB1118-12 1 1/8 1095 5800 WINCHESTER 209 "HI-SKOR" 800-X 21.5 CB CB1118-12 1 1/8 1150 6500 WINCHESTER 209 "HI-SKOR" 800-X 23.0 CB CB1118-12 1 1/8 1205 7100 WINCHESTER 209 "HI-SKOR" 800-X 24.5 CB CB1118-12 1 1/8 1260 7800 WINCHESTER 209 "HI-SKOR" 800-X 20.0 REM. FIG8 1 1/8 1105 6100 WINCHESTER 209 "HI-SKOR" 800-X 21.0 REM. FIG8 1 1/8 1150 6600 WINCHESTER 209 "HI-SKOR" 800-X 22.5 REM. FIG8 1 1/8 1195 7000 WINCHESTER 209 "HI-SKOR" 800-X 24.5 REM. FIG8 1 1/8 1255 7700 WINCHESTER 209 "HI-SKOR" 800-X 20.0 FED. 12S3 1 1/8 1100 6500 WINCHESTER 209 "HI-SKOR" 800-X 21.5 FED. 12S3 1 1/8 1155 7100 WINCHESTER 209 "HI-SKOR" 800-X 22.5 FED. 12S3 1 1/8 1195 7600 WINCHESTER 209 "HI-SKOR" 800-X 24.0 FED. 12S3 1 1/8 1250 8400

LEAD MUZZLE CHAMBER

SHELL: FIOCCHI (PURPLE)

FIOCCHI 616 "HI-SKOR" 700-X 17.0 FIOCCHI 1 2GW 1 1/8 1145 9100 FIOCCHI 616 "HI-SKOR" 700-X 17.5 CLAYBUSTER CB-1100-12 1 1/8 1145 8000

FEDERAL 209A "HI-SKOR" 700-X 16 .5 FIOCCHI 12GW 1 1/8 1145 9700 FEDERAL 209A "HI-SKOR" 700-X 17.0 CLAYBUSTER CB-1100-12 1 1/8 1145 8300

REMINGTON 209STS "HI-SKOR" 700-X 1 7. 0 FIOCCHI 12GW 1 1/ 8 1145 8900

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

REMINGTON 209STS "HI-SKOR" 700-X 17.0 CLAYBUSTER CB-1100-12 1 1/8 1145 7900

NOTE - ALL DATA SHOWN IS FOR LEAD SHOT. DO NOT ATTEMPT TO LOAD WITH STEEL SHOT AS DANGEROUS LOADS MAY RESULT.

20 GAUGE 23⁄4 INCH 7/8 OUNCE LOADS

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: FIOCCHI (PURPLE)

WINCHESTER 209 "HI-SKOR" 700-X 17.0 FIOCCHI 12GW 1 1/8 1145 8800 WINCHESTER 209 "HI-SKOR" 700-X 17.5 CLAYBUSTER CB-1100-12 1 1/8 1145 8000

FIOCCHI 616 "HI-SKOR" 700-X 18.0 FIOCCHI 12GW 1 1/8 1200 9800 FIOCCHI 616 "HI-SKOR" 700-X 18.5 CLAYBUSTER CB-1100-12 1 1/8 1200 9000

FEDERAL 209A "HI-SKOR" 700-X 17. 5 FIOCCHI 12GW 1 1 /8 1200 10600 FEDERAL 209A "HI-SKOR" 700-X 18.0 CLAYBUSTER CB-1100-12 1 1/8 1200 9700

REMINGTON 209STS "HI-SKOR" 700-X 18 .0 FIOCCHI 12GW 1 1/8 1200 9900 REMINGTON 209STS "HI-SKOR" 700-X 18.0 CLAYBUSTER CB-1100-12 1 1/8 1200 8800

WINCHESTER 209 "HI-SKOR" 700-X 18.0 FIOCCHI 12GW 1 1/8 1200 10000 WINCHESTER 209 "HI-SKOR" 700-X 18.5 CLAYBUSTER CB-1100-12 1 1/8 1200 8800

SHELL: FEDERAL 2 3/4" PLASTIC TARGET/HUNTING

FEDERAL 209A "HI-SKOR" 700-X 14.5 WIN. WAA20 7/8 1210 11700 FEDERAL 209A "HI-SKOR" 700-X 14.5 WTW WINDJAMMER 7/8 1210 11800 FEDERAL 209A "HI-SKOR" 700-X 14.0 CB. CB1078-20 7/8 1190 11400 FEDERAL 209A "HI-SKOR" 700-X 14.5 REM. RXP 20 7/8 1210 11500 FEDERAL 209A "HI-SKOR" 700-X 14.0 FED. 20S1 7/8 1190 11900

REMINGTON 209P "HI-SKOR" 700-X 14.5 WIN. WAA20 7/8 1210 11200 REMINGTON 209P "HI-SKOR" 700-X 14.5 WTW WINDJAMMER 7/8 1205 11400 REMINGTON 209P "HI-SKOR" 700-X 14.5 CB. CB1078-20 7/8 1205 11300 REMINGTON 209P "HI-SKOR" 700-X 15.0 REM. RXP 20 7/8 1215 11100 REMINGTON 209P "HI-SKOR" 700-X 14.5 FED. 20S1 7/8 1205 11600

WINCHESTER 209 "HI-SKOR" 700-X 14.5 WIN. WAA20 7/8 1210 11200 WINCHESTER 209 "HI-SKOR" 700-X 14.5 WTW WINDJA MME R 7/8 1205 11200 WINCHESTER 209 "HI-SKOR" 700-X 14.0 CB. CB1078-20 7/8 1190 11000 WINCHESTER 209 "HI-SKOR" 700-X 14.5 REM . RXP 20 7/8 1205 11000 WINCHESTER 209 "HI-SKOR" 700-X 14.5 FED. 20S1 7/8 1210 11800

FEDERAL 209A PB 17.5 WIN. WAA20 7 / 8 1200 9400 FEDERAL 209A PB 17.5 WTW WINDJAMMER 7/8 1200 9500 FEDERAL 209A PB 17.0 CB. CB1078-20 7/8 1195 9800 FEDERAL 209A PB 17.5 RE M . RXP 20 7/8 1205 9300 FEDERAL 209A PB 17.5 FED. 20S1 7/8 1210 10000

REMINGTON 209P PB 17.5 WIN. WAA20 7 / 8 1200 9300 REMINGTON 209P PB 18.0 WTW WINDJAMMER 7/8 1210 9500 REMINGTON 209P PB 17.5 CB. CB1078-20 7/8 1200 9300 REMINGTON 209P PB 17.5 RE M . RXP 20 7/8 1200 8900 REMINGTON 209P PB 17.5 FED. 20S1 7/8 1200 9400

WINCHESTER 209 PB 17.5 WIN. WAA20 7/8 1200 9400 WINCHESTER 209 PB 17.5 WTW WINDJAMMER 7/8 1195 9500 WINCHESTER 209 PB 17.5 CB. CB1078-20 7/8 1200 9500 WINCHESTER 209 PB 18.0 REM. RXP 20 7/8 1195 9000 WINCHESTER 209 PB 17.5 FED. 20S1 7 / 8 1210 10100

FEDERAL 209A SR7625 18.5 WIN. WAA20 7 /8 1210 9200 FEDERAL 209A SR7625 18.5 WTW WINDJAMMER 7/8 1190 8600 FEDERAL 209A SR7625 18.5 CB. CB1078-20 7/8 1210 9500 FEDERAL 209A SR7625 19.0 REM. RXP 20 7/8 1210 8700 FEDERAL 209A SR7625 18.5 FED. 20S1 7 / 8 1195 8700

REMINGTON 209P SR7625 18.5 WIN. WAA20 7 /8 1195 8500 REMINGTON 209P SR7625 19.0 WTW WINDJAMMER 7/8 1200 8300 REMINGTON 209P SR7625 18.5 CB. CB1078-20 7/8 1195 8600 REMINGTON 209P SR7625 19.5 REM. RXP 20 7/8 1205 8300 REMINGTON 209P SR7625 19.0 FED. 20S1 7 / 8 1200 8300

WINCHESTER 209 SR7625 18. 5 WIN. WAA20 7/ 8 1195 8400 WINCHESTER 209 SR7625 19. 0 WTW WINDJAMMER 7/8 1200 9100 WINCHESTER 209 SR7625 18. 5 CB. CB1078-20 7/8 1210 9000 WINCHESTER 209 SR7625 18.5 RE M. RXP 20 7/8 1195 8500 WINCHESTER 209 SR7625 18. 5 FED. 20S1 7/ 8 1195 8600

NOTE - ALL DATA SHOWN IS FOR LEAD SHOT. DO NOT ATTEMPT TO LOAD WITH STEEL SHOT AS DANGEROUS LOADS MAY RESULT.

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

LEAD MUZZLE CHAMBER

20 GAUGE 23⁄4 INCH 7/8 OUNCE LOADS (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: FEDERAL 2 3/4" PLASTIC TARGET/HUNTING

FEDERAL 209A "HI-SKOR" 800-X 17.5 WIN. WAA20 7/8 1205 8000 FEDERAL 209A "HI-SKOR" 800-X 17.5 WTW WINDJAMMER 7/8 1205 8000 FEDERAL 209A "HI-SKOR" 800-X 17.0 CB. CB1078-20 7/8 1190 7800 FEDERAL 209A "HI-SKOR" 800-X 17.5 REM. RXP 20 7/8 1200 7600 FEDERAL 209A "HI-SKOR" 800-X 17.0 FED. 20S1 7/8 1190 8200

REMINGTON 209P "HI-SKOR" 800-X 17.5 WIN. WAA20 7/8 1200 7600 REMINGTON 209P "HI-SKOR" 800-X 17.0 WTW WINDJAMMER 7/8 1195 7300 REMINGTON 209P "HI-SKOR" 800-X 17.5 CB. CB1078-20 7/8 1205 7900 REMINGTON 209P "HI-SKOR" 800-X 18.0 REM. RXP 20 7/8 1210 7600 REMINGTON 209P "HI-SKOR" 800-X 17.5 FED. 20S1 7/8 1195 7900

WINCHESTER 209 "HI-SKOR" 800-X 17.5 WIN. WAA20 7/8 1210 8100 WINCHESTER 209 "HI-SKOR" 800-X 17.5 WTW WINDJA MME R 7/8 1200 8000 WINCHESTER 209 "HI-SKOR" 800-X 17.0 CB. CB1078-20 7/8 1195 8100 WINCHESTER 209 "HI-SKOR" 800-X 17.5 REM . RXP 20 7/8 1210 8000 WINCHESTER 209 "HI-SKOR" 800-X 17.5 FED. 20S1 7/8 1200 8300

FEDERAL 209A SR4756 20.5 WIN. WAA20F1 7/8 1205 8500 FEDERAL 209A SR4756 20.5 WTW WINDJAMMER 7/8 1210 8700 FEDERAL 209A SR4756 21.0 REM. RXP 20 7/8 1200 7800 FEDERAL 209A SR4756 20.5 FED. 20S1 7 / 8 1210 8700

REMINGTON 209P SR4756 21.5 WIN. WAA20F1 7/8 1200 7900 REMINGTON 209P SR4756 21.5 WTW WINDJAMMER 7/8 1200 7900 REMINGTON 209P SR4756 21.5 REM. RXP 20 7/8 1180 7000 REMINGTON 209P SR4756 21.5 FED. 20S1 7 / 8 1205 7600

WINCHESTER 209 SR4756 20. 5 WIN. WAA20F1 7/8 1195 8200 WINCHESTER 209 SR4756 20. 5 WTW WINDJAMMER 7/8 1195 8300 WINCHESTER 209 SR4756 21.0 RE M. RXP 20 7/8 1205 7900 WINCHESTER 209 SR4756 20. 5 FED. 20S1 7/8 1205 8500

LEAD MUZZLE CHAMBER

SHELL: REMINGTON PREMIER (RTL)

FEDERAL 209A PB 15.5 WTW WINDJAMMER 7/8 1185 11900 FEDERAL 209A PB 16.0 RE M . RXP 20 7/8 1195 11600 FEDERAL 209A PB 15.0 REM. 20S1 7/8 1160 11900 FEDERAL 209A PB 16.0 WIN. WAA20F1 7/8 1210 11900

REMINGTON 209P PB 16.0 WTW WINDJAMMER 7/8 1210 11700 REMINGTON 209P PB 16.0 CB. CB1078-20 7/8 1195 11800 REMINGTON 209P PB 16.0 RE M . RXP 20 7/8 1195 11000 REMINGTON 209P PB 15.5 FED. 20S1 7 / 8 1185 11800 REMINGTON 209P PB 16.0 WIN. WAA20F1 7/8 1195 11400

WINCHESTER 209 PB 16.0 WTW WINDJAMMER 7/8 1200 11700 WINCHESTER 209 PB 16.0 CB. CB1078-20 7/8 1195 11700 WINCHESTER 209 PB 16.0 REM. RXP 20 7/8 1190 11100 WINCHESTER 209 PB 16.0 WIN. WAA20F1 7/8 1190 11100

FEDERAL 209A SR7625 16.5 WIN. WAA20 7/8 1205 12000 FEDERAL 209A SR7625 16.5 WTW WINDJAMMER 7/8 1200 11400 FEDERAL 209A SR7625 16.5 CB. CB1078-20 7/8 1195 11400 FEDERAL 209A SR7625 17.0 REM. RXP 20 7/8 1210 11000 FEDERAL 209A SR7625 16.5 FED. 20S1 7 / 8 1190 12000

REMINGTON 209P SR7625 17.0 WIN. WAA20 7/8 1205 11000 REMINGTON 209P SR7625 17.0 WTW WINDJAMMER 7/8 1210 11000 REMINGTON 209P SR7625 17.0 CB. CB1078-20 7/8 1205 11000 REMINGTON 209P SR7625 17.0 REM. RXP 20 7/8 1190 10100 REMINGTON 209P SR7625 17.0 FED. 20S1 7 / 8 1195 11100

WINCHESTER 209 SR7625 17. 0 WIN. WAA20 7/8 1200 10900 WINCHESTER 209 SR7625 17. 0 WTW WINDJAMMER 7/8 1200 10800 WINCHESTER 209 SR7625 17. 0 CB. CB1078-20 7/8 1205 11100 WINCHESTER 209 SR7625 17.0 RE M. RXP 20 7/8 1195 10300 WINCHESTER 209 SR7625 17. 0 FED. 20S1 7/8 1210 11800

FEDERAL 209A "HI-SKOR" 800-X 16.0 WIN. WAA20 7/8 1195 9300 FEDERAL 209A "HI-SKOR" 800-X 16.0 WTW WINDJAMMER 7/8 1200 9500 FEDERAL 209A "HI-SKOR" 800-X 16.0 CB. CB1078-20 7/8 1215 9900 FEDERAL 209A "HI-SKOR" 800-X 16.0 REM. RXP 20 7/8 1190 9100

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

FEDERAL 209A "HI-SKOR" 800-X 16.0 FED. 20S1 7/8 1210 10000

NOTE - ALL DATA SHOWN IS FOR LEAD SHOT. DO NOT ATTEMPT TO LOAD WITH STEEL SHOT AS DANGEROUS LOADS MAY RESULT.

20 GAUGE 23⁄4 INCH 7/8 OUNCE LOADS (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: REMINGTON PREMIER (RTL)

REMINGTON 209P "HI-SKOR" 800-X 16.5 WIN. WAA20 7/8 1205 9100 REMINGTON 209P "HI-SKOR" 800-X 16.5 WTW WINDJAMMER 7/8 1210 9500 REMINGTON 209P "HI-SKOR" 800-X 16.0 CB. CB1078-20 7/8 1205 9500 REMINGTON 209P "HI-SKOR" 800-X 16.5 REM. RXP 20 7/8 1200 9100 REMINGTON 209P "HI-SKOR" 800-X 16.0 FED. 20S1 7/8 1195 9600

WINCHESTER 209 "HI-SKOR" 800-X 16.0 WIN. WAA20 7/8 1190 9300 WINCHESTER 209 "HI-SKOR" 800-X 16.0 WTW WINDJA MME R 7/8 1190 9500 WINCHESTER 209 "HI-SKOR" 800-X 16.0 CB. CB1078-20 7/8 1205 9600 WINCHESTER 209 "HI-SKOR" 800-X 16.5 REM . RXP 20 7/8 1210 9500 WINCHESTER 209 "HI-SKOR" 800-X 16.0 FED. 20S1 7/8 1200 9600

FEDERAL 209A SR4756 17.5 WIN. WAA20F1 7/8 1190 10200 FEDERAL 209A SR4756 17.5 REM SP20 7/8 1195 10600

REMINGTON 209P SR4756 18.5 WIN. WAA20F1 7/8 1195 9500 REMINGTON 209P SR4756 18.5 REM SP20 7/8 1205 10200

WINCHESTER 209 SR4756 19. 0 WIN. WAA20F1 7/8 1205 9600 WINCHESTER 209 SR4756 18. 5 REM SP20 7/8 1205 10300

SHELL: WINCHESTER AA

REMINGTON 209P "HI-SKOR" 700-X 13.0 REM. RXP 20 7/8 1160 11800 FEDERAL 209A PB 15.5 WIN. WAA20 7 / 8 1180 11700

FEDERAL 209A PB 15.5 WTW WINDJAMMER 7/8 1185 11900 FEDERAL 209A PB 16.0 RE M . RXP 20 7/8 1205 11900 FEDERAL 209A PB 15.0 FED. 20S1 7/8 1160 11900

REMINGTON 209P PB 16.0 WIN. WAA20 7 / 8 1200 11600 REMINGTON 209P PB 16.0 WTW WINDJAMMER 7/8 1200 11300 REMINGTON 209P PB 16.0 CB. CB1078-20 7/8 1200 11900 REMINGTON 209P PB 16.0 RE M . RXP 20 7/8 1195 10900 REMINGTON 209P PB 15.5 FED. 20S1 7/8 1175 11600

WINCHESTER 209 PB 16.0 WIN. WAA20 7/8 1195 11700 WINCHESTER 209 PB 16.5 WTW WINDJAMMER 7/8 1200 11800 WINCHESTER 209 PB 16.0 REM. RXP 20 7/8 1195 11400 WINCHESTER 209 PB 15.5 FED. 20S1 7 / 8 1175 11800

FEDERAL 209A SR7625 16.5 WIN. WAA20 7 /8 1205 11700 FEDERAL 209A SR7625 16.5 WTW WINDJAMMER 7/8 1200 11900 FEDERAL 209A SR7625 16.5 CB. CB1078-20 7/8 1195 11700 FEDERAL 209A SR7625 17.0 REM. RXP 20 7/8 1200 10800 FEDERAL 209A SR7625 16.5 FED. 20S1 7 / 8 1190 11700

REMINGTON 209P SR7625 17.0 WIN. WAA20 7 /8 1200 10900 REMINGTON 209P SR7625 17.5 WTW WINDJAMMER 7/8 1210 10300 REMINGTON 209P SR7625 17.0 CB. CB1078-20 7/8 1210 11300 REMINGTON 209P SR7625 17.0 REM. RXP 20 7/8 1190 10100 REMINGTON 209P SR7625 16.5 FED. 20S1 7 / 8 1185 11100

WINCHESTER 209 SR7625 17. 0 WIN. WAA20 7/ 8 1205 10600 WINCHESTER 209 SR7625 17. 0 WTW WINDJAMMER 7/8 1205 10900 WINCHESTER 209 SR7625 16. 5 CB. CB1078-20 7/8 1190 10800 WINCHESTER 209 SR7625 17.0 RE M. RXP 20 7/8 1210 10600 WINCHESTER 209 SR7625 16. 5 FED. 20S1 7/ 8 1195 11700

FEDERAL 209A "HI-SKOR" 800-X 16.5 WIN. WAA20 7/8 1205 9400 FEDERAL 209A "HI-SKOR" 800-X 16.5 WTW WINDJAMMER 7/8 1215 10100 FEDERAL 209A "HI-SKOR" 800-X 16.0 CB. CB1078-20 7/8 1190 9400 FEDERAL 209A "HI-SKOR" 800-X 16.5 REM. RXP 20 7/8 1200 8800 FEDERAL 209A "HI-SKOR" 800-X 16.0 FED. 20S1 7/8 1190 9700

REMINGTON 209P "HI-SKOR" 800-X 16.5 WIN. WAA20 7/8 1210 9300 REMINGTON 209P "HI-SKOR" 800-X 16.5 WTW WINDJAMMER 7/8 1190 8400 REMINGTON 209P "HI-SKOR" 800-X 16.5 CB. CB1078-20 7/8 1195 8400 REMINGTON 209P "HI-SKOR" 800-X 16.5 REM. RXP 20 7/8 1190 7500 REMINGTON 209P "HI-SKOR" 800-X 16.5 FED. 20S1 7/8 1190 8200

LEAD MUZZLE CHAMBER

NOTE - ALL DATA SHOWN IS FOR LEAD SHOT. DO NOT ATTEMPT TO LOAD WITH STEEL SHOT AS DANGEROUS LOADS MAY RESULT.

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

28 GAUGE 23⁄4 INCH 3⁄4 OUNCE LOADS (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: WINCHESTER AA

WINCHESTER 209 "HI-SKOR" 800-X 16.5 WIN. WAA20 7/8 1205 9900 WINCHESTER 209 "HI-SKOR" 800-X 16.5 WTW WINDJA MME R 7/8 1200 10300 WINCHESTER 209 "HI-SKOR" 800-X 16.0 CB. CB1078-20 7/8 1190 9600 WINCHESTER 209 "HI-SKOR" 800-X 16.5 REM . RXP 20 7/8 1210 9400 WINCHESTER 209 "HI-SKOR" 800-X 16.0 FED. 20S1 7/8 1190 9600

FEDERAL 209A SR4756 18.0 WIN. WAA20F1 7/8 1190 10000 FEDERAL 209A SR4756 18.5 WTW WINDJAMMER 7/8 1185 10000 FEDERAL 209A SR4756 18.0 CB. CB1078-20 7/8 1195 10300 FEDERAL 209A SR4756 18.5 REM. SP20 7 /8 1215 10700 FEDERAL 209A SR4756 18.0 FED. 20S1 7 / 8 1190 10600

REMINGTON 209P SR4756 18.5 WIN. WAA20F1 7/8 1200 9800 REMINGTON 209P SR4756 18.5 CB. CB1078-20 7/8 1200 10000 REMINGTON 209P SR4756 19.0 REM. SP20 7 /8 1210 9700 REMINGTON 209P SR4756 18.5 FED. 20S1 7 / 8 1190 10100

WINCHESTER 209 SR4756 18. 5 WIN. WAA20F1 7/8 1200 9900 WINCHESTER 209 SR4756 18. 5 WTW WINDJAMMER 7/8 1195 9900 WINCHESTER 209 SR4756 18. 0 CB. CB1078-20 7/8 1180 9700 WINCHESTER 209 SR4756 18. 5 REM. SP20 7/8 1200 9900 WINCHESTER 209 SR4756 18. 0 FED. 20S1 7/8 1205 10700

SHELL: FEDERAL PLASTIC TARGET/HUNTING

FEDERAL 209A PB 13.0 WIN. WAA28 3 / 4 1165 12400 FEDERAL 209A PB 13.0 CB. CB-1034-28 3/4 1165 12100 FEDERAL 209A PB 13.0 REM. PT28 3/4 1160 12300

REMINGTON 209P PB 14.5 WIN. WAA28 3 / 4 1205 11400 REMINGTON 209P PB 14.5 PATCTL. PC-28 3/4 1200 11500 REMINGTON 209P PB 14.5 REM. PT28 3/4 1200 11700 REMINGTON 209P PB 14.0 FED. 28S1 3 / 4 1190 12200

WINCHESTER 209 PB 14.5 WIN. WAA28 3/4 1215 11900 WINCHESTER 209 PB 14.5 PATCTL. PC-28 3/4 1210 12000 WINCHESTER 209 PB 14.5 REM. PT28 3/4 1205 12100 WINCHESTER 209 PB 14.0 FED. 28S1 3 / 4 1185 12500

FEDERAL 209A SR7625 14.5 WIN. WAA28 3/4 1215 12300 FEDERAL 209A SR7625 14.0 PATCTL. PC-28 3/4 1195 11900 FEDERAL 209A SR7625 14.0 CB. CB-1034-28 3/4 1195 12000 FEDERAL 209A SR7625 15.5 REM. PT28 3/ 4 1195 11800 FEDERAL 209A SR7625 14.0 FED. 28S1 3 / 4 1185 12000

REMINGTON 209P SR7625 14.5 WIN. WAA28 3/4 1185 10500 REMINGTON 209P SR7625 15.0 PATCTL. PC-28 3/4 1205 10100 REMINGTON 209P SR7625 15.0 REM. PT28 3/ 4 1190 10200 REMINGTON 209P SR7625 14.5 FED. 28S1 3 / 4 1190 10800

WINCHESTER 209 SR7625 14. 5 WIN. WAA28 3/4 1185 10800 WINCHESTER 209 SR7625 15. 0 PATCTL. PC-28 3/4 1205 10900 WINCHESTER 209 SR7625 15. 0 REM. PT28 3/4 1200 11100 WINCHESTER 209 SR7625 15. 0 FED. 28S1 3/4 1205 11200

FEDERAL 209A "HI-SKOR" 800-X 13.5 WIN. WAA28 3/4 1195 10100 FEDERAL 209A "HI-SKOR" 800-X 13.5 PATCTL. PC-28 3/4 1215 10600 FEDERAL 209A "HI-SKOR" 800-X 13.5 CB. CB1034-28 3/4 1200 10000 FEDERAL 209A "HI-SKOR" 800-X 13.5 REM. PT28 3 / 4 1205 10700 FEDERAL 209A "HI-SKOR" 800-X 13.5 FED. 28S1 3/4 1205 11000

REMINGTON 209P "HI-SKOR" 800-X 14.5 WIN. WAA28 3/4 1210 9500 REMINGTON 209P "HI-SKOR" 800-X 14.0 PATCTL. PC-28 3/4 1200 9600 REMINGTON 209P "HI-SKOR" 800-X 14.0 CB. CB1034-28 3/4 1205 9800 REMINGTON 209P "HI-SKOR" 800-X 14.0 REM. PT28 3 / 4 1195 9900 REMINGTON 209P "HI-SKOR" 800-X 14.0 FED. 28S1 3/4 1210 10400

WINCHESTER 209 "HI-SKOR" 800-X 14.0 WIN. WAA28 3/4 1210 10000 WINCHESTER 209 "HI-SKOR" 800-X 13.5 PATCTL. PC-28 3/4 1190 9900 WINCHESTER 209 "HI-SKOR" 800-X 13.5 CB. CB1034-28 3/4 1190 9800 WINCHESTER 209 "HI-SKOR" 800-X 13.5 REM. PT28 3/ 4 1190 10100 WINCHESTER 209 "HI-SKOR" 800-X 13.5 FED. 28S1 3/4 1200 10500

FEDERAL 209A SR4756 15.5 PATCTL. PC-28 3/4 1210 11400

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

FEDERAL 209A SR4756 15.5 REM. PT28 3/ 4 1200 11400 FEDERAL 209A SR4756 15.5 FED. 28S1 3 / 4 1205 11900

LEAD MUZZLE CHAMBER

NOTE - ALL DATA SHOWN IS FOR LEAD SHOT. DO NOT ATTEMPT TO LOAD WITH STEEL SHOT AS DANGEROUS LOADS MAY RESULT.

28 GAUGE 23⁄4 INCH 3⁄4 OUNCE LOADS (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: FEDERAL PLASTIC TARGET/HUNTING

REMINGTON 209P SR4756 16.0 PATCTL. PC-28 3/4 1185 9600 REMINGTON 209P SR4756 17.0 REM. PT28 3/ 4 1170 10300 REMINGTON 209P SR4756 16.5 FED. 28S1 3 / 4 1195 9800

WINCHESTER 209 SR4756 16. 0 PATCTL. PC-28 3/4 1200 10300 WINCHESTER 209 SR4756 16. 0 REM. PT28 3/4 1190 10500 WINCHESTER 209 SR4756 16. 0 FED. 28S1 3/ 4 1195 10600

SHELL: REMINGTON PREMIER (RTL)

REMINGTON 209P PB 13.5 WIN. WAA28 3 / 4 1205 12300 REMINGTON 209P PB 13.0 PATCTL. PC-28 3/4 1185 12100 REMINGTON 209P PB 13.0 REM. PT28 3/4 1175 12500

REMINGTON 209P SR7625 14.0 WIN. WAA28 3 /4 1205 11800 REMINGTON 209P SR7625 14.0 PATCTL. PC-28 3/4 1200 11700 REMINGTON 209P SR7625 13.5 REM. PT28 3/ 4 1190 12400 REMINGTON 209P SR7625 13.5 FED. 28S1 3 / 4 1185 12400

WINCHESTER 209 SR7625 14. 0 WIN. WAA28 3/ 4 1210 12200 WINCHESTER 209 SR7625 14. 0 PATCTL. PC-28 3/4 1210 12200 WINCHESTER 209 SR7625 14. 0 REM. PT28 3/4 1200 12500

FEDERAL 209A "HI-SKOR" 800-X 13.0 WIN. WAA28 3/4 1195 11000 FEDERAL 209A "HI-SKOR" 800-X 13.0 PATCT.L PC-28 3/4 1210 11400 FEDERAL 209A "HI-SKOR" 800-X 13.0 CB. CB1034-28 3/4 1200 10800 FEDERAL 209A "HI-SKOR" 800-X 13.0 REM. PT28 3/4 1205 11400 FEDERAL 209A "HI-SKOR" 800-X 13.0 FED. 28S1 3/4 1205 11700

REMINGTON 209P "HI-SKOR" 800-X 13.5 WIN. WAA28 3/4 1205 10300 REMINGTON 209P "HI-SKOR" 800-X 13.0 PATCTL. PC-28 3/4 1190 10300 REMINGTON 209P "HI-SKOR" 800-X 13.5 CB. CB1034-28 3/4 1205 10300 REMINGTON 209P "HI-SKOR" 800-X 13.5 REM. PT28 3/4 1205 10700 REMINGTON 209P "HI-SKOR" 800-X 13.5 FED. 28S1 3/4 1215 11600

WINCHESTER 209 "HI-SKOR" 800-X 13.0 WIN. WAA28 3/4 1185 10400 WINCHESTER 209 "HI-SKOR" 800-X 13.0 PATCTL. PC-28 3/4 1185 10300 WINCHESTER 209 "HI-SKOR" 800-X 13.5 CB. CB1034-28 3/4 1215 10800 WINCHESTER 209 "HI-SKOR" 800-X 13.5 REM. PT28 3 / 4 1210 11100 WINCHESTER 209 "HI-SKOR" 800-X 13.0 FED. 28S1 3/4 1195 11300

FEDERAL 209A SR4756 14.5 PATCTL. PC-28 3/4 1200 12200 FEDERAL 209A SR4756 14.0 REM. PT28 3/ 4 1185 12500 FEDERAL 209A SR4756 14.0 FED. 28S1 3 / 4 1175 12300

REMINGTON 209P SR4756 15.0 PATCTL. PC-28 3/4 1165 9900 REMINGTON 209P SR4756 14.0 FED. 28S1 3 / 4 1140 10300

WINCHESTER 209 SR4756 15. 0 PATCTL. PC-28 3/4 1200 11200 WINCHESTER 209 SR4756 14. 0 REM. PT28 3/4 1155 11000 WINCHESTER 209 SR4756 14. 0 FED. 28S1 3/ 4 1160 11500

LEAD MUZZLE CHAMBER

SHELL: WINCHESTER COMPRESSION FORMED "DOUBLE-A" & "SUPER-X"

REMINGTON 209P SR7625 14.0 WIN. WAA28 3 /4 1205 12300 REMINGTON 209P SR7625 13.5 PATCTL. PC-28 3/4 1170 12000 REMINGTON 209P SR7625 14.0 CB. CB1034-28 3/4 1190 12300 REMINGTON 209P SR7625 13.5 FED. 28S1 3 / 4 1170 12400

FEDERAL 209A "HI-SKOR" 800-X 12.5 WIN. WAA28 3/4 1185 11600 FEDERAL 209A "HI-SKOR" 800-X 13.0 PATCTL. PC-28 3/4 1210 12300 FEDERAL 209A "HI-SKOR" 800-X 12.5 CB. CB1034-28 3/4 1185 11700 FEDERAL 209A "HI-SKOR" 800-X 12.0 FED. 28S1 3/4 1150 12000

REMINGTON 209P "HI-SKOR" 800-X 14.0 WIN. WAA28 3/4 1200 9700 REMINGTON 209P "HI-SKOR" 800-X 13.0 PATCTL. PC-28 3/4 1200 11400 REMINGTON 209P "HI-SKOR" 800-X 13.5 CB. CB1034-28 3/4 1200 10200 REMINGTON 209P "HI-SKOR" 800-X 13.5 FED. 28S1 3/4 1205 11500

WINCHESTER 209 "HI-SKOR" 800-X 13.0 WIN. WAA28 3/4 1195 11400 WINCHESTER 209 "HI-SKOR" 800-X 13.0 PATCTL. PC-28 3/4 1205 12000 WINCHESTER 209 "HI-SKOR" 800-X 13.0 CB. CB1034-28 3/4 1190 11200 WINCHESTER 209 "HI-SKOR" 800-X 12.5 FED. 28S1 3/4 1175 12200

NOTE - ALL DATA SHOWN IS FOR LEAD SHOT. DO NOT ATTEMPT TO LOAD WITH STEEL SHOT AS DANGEROUS LOADS MAY RESULT.

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

28 GAUGE 23⁄4 INCH 3⁄4 OUNCE LOADS (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: WINCHESTER COMPRESSION FORMED "DOUBLE-A" & "SUPER-X"

REMINGTON 209P SR4756 14.0 WIN. WAA28 3/4 1150 11500 REMINGTON 209P SR4756 14.5 PATCTL. PC-28 3/4 1185 12200 REMINGTON 209P SR4756 14.0 CB. CB1034-28 3/4 1165 12000

WINCHESTER 209 SR4756 14. 0 WIN. WAA28 3/4 1150 11400 WINCHESTER 209 SR4756 14. 5 PATCTL. PC-28 3/4 1190 12000 WINCHESTER 209 SR4756 14. 0 CB. CB1034-28 3/4 1170 12200 WINCHESTER 209 SR4756 14. 0 FED. 28S1 3/4 1155 12500

LEAD MUZZLE CHAMBER

.410 BORE 21⁄2 INCH 1⁄2 OUNCE LOADS

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: FEDERAL 2 1/2" PLASTIC TARGET/HUNTING

FEDERAL 209A IMR4227 17 . 0 PATCTL. PC-410 1/2 1170 12500 FEDERAL 209A IMR4227 17 .0 REM. SP410 1/2 1155 12000 FEDERAL 209A IMR4227 17 . 5 CB. CB1050-41 1/2 1190 12200 FEDERAL 209A IMR4227 17 .5 FED. 410SC 1/2 1195 12200

REMINGTON 209P IMR4227 18 .5 REM. SP410 1/2 1180 10700 WINCHESTER 209 IMR4227 1 8 .5 PATCTL. PC-410 1/2 1215 11800

WINCHESTER 209 IMR4227 1 8. 0 REM. SP410 1/2 1200 12000 WINCHESTER 209 IMR4227 1 8 .0 CB. CB1050-41 1/2 1165 11300

LEAD MUZZLE CHAMBER

SHELL: REMINGTON 2 1/2" EXPRESS

FEDERAL 209A IMR4227 17 . 5 PATCTL. PC-410 1/2 1195 12500 FEDERAL 209A IMR4227 18 . 0 CB. CB1050-41 1/2 1210 12500 FEDERAL 209A IMR4227 17 .5 FED. 410SC 1/2 1195 12400

WINCHESTER 209 IMR4227 1 7 .5 PATCTL. PC-410 1/2 1160 11200 WINCHESTER 209 IMR4227 1 8 .0 CB. CB1050-41 1/2 1160 11000

SHELL: WINCHESTER COMPRESSION FORMED "DOUBLE-A" & "SUPER-X"

WINCHESTER 209 IMR4227 1 6 .5 PATCTL. PC-410 1/2 1140 12300

SHOTSHELL FIELD

10 GAUGE 31⁄2 INCH RELOADING DATA

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: FEDERAL 3 1/2" MAGNUM PAPER BASEWAD

FEDERAL 209A "HI-SKOR" 800-X 29.0 REM SP10+(2) 20GA 0.125" CARDS 2 1/4 1085 10700 FEDERAL 209A SR4756 33.0 REM SP10 2 1/4 1065 10600

FEDERAL 209A "HI-SKOR" 800-X 32.0 REM SP10+(4)20GA 0.125" CARDS 2 1180 10900 FEDERAL 209A SR4756 37.0 REM SP10+(2)20GA 0.125" CARDS 2 1175 10800 REMINGTON 209PSTS SR4756 41.5 REM SP10+(2)20GA 0.125" CARDS 2 1230 10800

SHELL: REMINGTON 3 1/2" NITRO MAGNUM PLASTIC BASEWAD

REMINGTON 209PSTS "HI-SKOR" 800-X 28.0 REM SP10+(3)20GA 0.125" CARDS 2 1/4 1055 10800 REMINGTON 209PSTS SR4756 34.5 REM SP10 2 1/4 1095 10900

REMINGTON 209PSTS SR7625 32.5 REM SP10+(3)20GA 0.125" CARDS 2 1115 10800 REMINGTON 209PSTS "HI-SKOR" 800-X 30.0 REM SP10+(4)20GA 0.125" CARDS 2 1145 10900 REMINGTON 209PSTS SR4756 39.5 REM SP10+(2)20GA 0.125" CARDS 2 1210 10800

LEAD MUZZLE CHAMBER

SHELL: WINCHESTER 3 1/2" SUPER MAGNUM PLASTIC BASEWAD

WINCHESTER 209 "HI-SKOR" 800-X 3 2.0 REM SP10 2 1/4 1135 10900 WINCHESTER 209 SR4756 37. 0 REM SP10 2 1/4 1130 11000

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

WINCHESTER 209 "HI-SKOR" 800-X 35.0 REM SP10+(2)20 GA 0.125" CARDS 2 1230 10800 WINCHESTER 209 SR4756 42 .0 REM SP10+(1)20GA 0.125" CARD 2 1245 10700

12 GAUGE BUCKSHOT RELOADING DATA

PRIMER IMR POWDER WAD COLUMN SDC BUFFER NO. SIZE VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (GRAINS) OF PELLETS (FT/SEC) (PSI)

SHELL: FEDERAL 2 3/4" PLASTIC GOLD MEDAL

FEDERAL 209A "HI-SKOR" 700-X 17.5 FED 12S3 2 0 8 00 1230 10900 FEDERAL 209A PB 25.0 FED 12S4 20 8 00 1340 10900 FEDERAL 209A SR7625 30.0 FED 12S4 20 8 00 1410 10800 FEDERAL 209A "HI-SKOR" 800-X 29.0 FED 12S4 2 0 8 00 1465 10800 FEDERAL 209A SR4756 37.0 WIN WAA12R 18 8 00 1545 10900

SHELL: REMINGTON 2 3/4" NITRO 27

REMINGTON 209PSTS "HI-SKOR" 700-X 17.5 REM FIG8 20 8 00 1225 10700 FEDERAL 209A "HI-SKOR" 700-X 17.0 REM FIG8 20 8 00 1210 10800 REMINGTON 209PSTS PB 25.0 REM SP12 20 8 00 1340 10600

REMINGTON 209PSTS SR7625 30.5 REM SP12 20 8 00 1425 10800 FEDERAL 209A SR7625 27.0 REM SP12 20 8 00 1360 10800

REMINGTON 209PSTS "HI-SKOR" 800-X 30.0 REM SP12 20 8 00 1475 10900 REMINGTON 209PSTS SR4756 37.0 WIN WAA12R 18 8 00 1545 11000

SHELL: WINCHESTER 2 3/4" AA

WINCHESTER 209 "HI-SKOR" 700-X 18.0 WIN WAA12R 20 8 00 1245 10800 WINCHESTER 209 PB 27.5 WIN WAA12R 20 8 00 1410 10800 WINCHESTER 209 SR7625 33. 0 WIN WAA12R 20 8 00 1495 10600

FEDERAL 209A SR7625 29.5 WIN WAA12R 20 8 00 1430 11000 WINCHESTER 209 "HI-SKOR" 800-X 32.0 WIN WAA12R 20 8 00 1545 10700 WINCHESTER 209 SR4756 39. 5 WIN WAA12R 18 8 00 1595 10800

BP BUCKSHOT MUZZLE CHAMBER

12 GAUGE FIELD RELOADING DATA

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: FEDERAL 2 3/4" PLASTIC GOLD MEDAL, TOP GUN, MULTI PURPOSE

FEDERAL 209A "HI-SKOR" 700-X 18.0 FED. 12S4 1 1/4 1165 11500 FEDERAL 209A "HI-SKOR" 700-X 20. 0 WINJ. WINDJAMMER 1 1/4 1230 11300 FEDERAL 209A "HI-SKOR" 700-X 19. 0 REM. FIG8 1 1/ 4 1200 11300 FEDERAL 209A "HI-SKOR" 700-X 18. 0 WIN. WAA12 1 1/4 1180 11500

REMINGTON 209P "HI-SKOR" 700-X 19.5 FED. 12S3 1 1/4 1205 11500 REMINGTON 209P "HI-SKOR" 700-X 21. 0 WINJ. WINDJAMMER 1 1/4 1260 11500 REMINGTON 209P "HI-SKOR" 700-X 21. 0 REM. FIG8 1 1/ 4 1255 11500 REMINGTON 209P "HI-SKOR" 700-X 19. 5 WIN. WAA12 1 1/4 1215 11400

WINCHESTER 209 "HI-SKOR" 700-X 19.0 FED. 12S3 1 1/4 1195 11500 WINCHESTER 209 "HI-SKOR" 700-X 21.0 WINJ . WINDJA MME R 1 1/4 1250 11500 WINCHESTER 209 "HI-SKOR" 700-X 19.5 REM. FIG8 1 1/4 1210 11100 WINCHESTER 209 "HI-SKOR" 700-X 19.0 WIN . WAA12 1 1/4 1200 11500

FEDERAL 209A PB 23.5 FED. 12S4 1 1/4 1225 10500 FEDERAL 209A PB 25.0 FED. 12S4 1 1/4 1270 11300 FEDERAL 209A PB 25.5 REM. FIG8 1 1/4 1270 10500 FEDERAL 209A PB 27.0 REM. FIG8 1 1/4 1315 11500 FEDERAL 209A PB 25.5 CLAYB. CB3118-12AR 1 1/4 1275 11100 FEDERAL 209A PB 26.0 CLAYB. CB3118-12AR 1 1/4 1295 11500

REMINGTON 209P PB 26.5 FED. 12S4 1 1/4 1295 10000 REMINGTON 209P PB 28.0 FED. 12S4 1 1/4 1325 11100 REMINGTON 209P PB 27.5 REM. SP12 1 1/4 1270 9200 REMINGTON 209P PB 29.0 REM. SP12 1 1/4 1330 10500 REMINGTON 209P PB 26.5 CLAYB. CB3118-12AR 1 1/4 1275 9600 REMINGTON 209P PB 28.0 CLAYB. CB3118-12AR 1 1/4 1305 10200

WINCHESTER 209 PB 26.0 FED. 12S4 1 1/4 1275 10800 WINCHESTER 209 PB 27.5 FED. 12S4 1 1/4 1320 11500 WINCHESTER 20 9 PB 2 6.5 REM. S P12 1 1/4 1280 9800

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

WINCHESTER 209 PB 28.0 REM. SP1 2 1 1/4 1320 10600 WINCHESTER 209 PB 26.5 CLAYB. CB3118-12AR 1 1/4 1270 10000 WINCHESTER 209 PB 28.0 CLAYB. CB3118-12AR 1 1/4 1330 11400

LEAD MUZZLE CHAMBER

12 GAUGE FIELD RELOADING DATA (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: FEDERAL 2 3/4" PLASTIC GOLD MEDAL, TOP GUN, MULTI PURPOSE

FEDERAL 209A SR7625 27.0 FED. 12S3 1 1/4 1270 10100 FEDERAL 209A SR7625 29.0 FED. 12S3 1 1/4 1325 11000 FEDERAL 209A SR2725 27.0 WIN. WAA12 1 1/4 1275 10100 FEDERAL 209A SR7625 28.5 WIN. WAA12 1 1/4 1330 11400 FEDERAL 209A SR7625 27.0 REM. SP12 1 1/4 1280 10000 FEDERAL 209A SR7625 28.5 REM. SP12 1 1/4 1330 11000 FEDERAL 209A SR7625 26.5 CLAYB. CB3118-12AR 1 1/4 1270 10100 FEDERAL 209A SR7625 28.0 CLAYB. CB3118-12AR 1 1/4 1320 10800

REMINGTON 209P SR7625 28.0 FED. 12S3 1 1/4 1270 8900 REMINGTON 209P SR7625 30.0 FED. 12S3 1 1/4 1330 9700 REMINGTON 209P SR7625 29.0 DINJ. WINDJAMMER 1 1/4 1280 8300 REMINGTON 209P SR7625 30.5 WINJ. WINDJAMMER 1 1/4 1325 9000 REMINGTON 209P SR7625 29.0 REM. SP12 1 1/4 1270 8200 REMINGTON 209P SR7625 30.5 REM. SP12 1 1/4 1315 8900

WINCHESTER 209 SR7625 28. 0 FED. 12S3 1 1/4 1270 9200 WINCHESTER 209 SR7625 30. 0 FED. 12S3 1 1/4 1330 10300 WINCHESTER 209 SR7625 28. 5 WINJ. WINDJAMMER 1 1/4 1270 8300 WINCHESTER 209 SR7625 30. 0 WINJ. WINDJAMMER 1 1/4 1315 9000 WINCHESTER 209 SR7625 28. 0 WIN. WAA12 1 1/4 1270 9100 WINCHESTER 209 SR7625 29. 5 WIN. WAA12 1 1/4 1325 10200

FEDERAL 209A SR4756 30.0 FED. 12S4 1 1/4 1285 9700 FEDERAL 209A SR4756 31.5 FED. 12S4 1 1/4 1330 10400 FEDERAL 209A SR4756 30.5 WIN. WAA12R 1 1 /4 1285 8900 FEDERAL 209A SR4756 31.5 WIN. WAA12R 1 1/4 1325 9700 FEDERAL 209A SR4756 30.0 REM. SP12 1 1/4 1270 9000 FEDERAL 209A SR4756 31.5 REM. SP12 1 1/4 1325 9800

REMINGTON 209P SR4756 31.5 FED. 12S4 1 1/4 1220 7100 REMINGTON 209P SR4756 33.0 FED. 12S4 1 1/4 1265 7600 REMINGTON 209P SR4756 33.0 WIN. WAA12R 1 1 /4 1285 8000 REMINGTON 209P SR4756 34.0 WIN. WAA12R 1 1 /4 1325 8900 REMINGTON 209P SR4756 33.0 REM. SP12 1 1/4 1315 7400 REMINGTON 209P SR4756 35.0 REM. SP12 1 1/4 1335 8300

WINCHESTER 209 SR4756 31. 0 FED. 12S4 1 1/4 1280 9100 WINCHESTER 209 SR4756 32. 0 FED. 12S4 1 1/4 1325 9800 WINCHESTER 209 SR4756 30. 5 WIN. WAA12R 1 1/4 1275 8400 WINCHESTER 209 SR4756 32. 0 WIN. WAA12R 1 1/4 1315 8900 WINCHESTER 209 SR4756 32. 0 REM. RP12 1 1/4 1290 8800 WINCHESTER 209 SR4756 33. 0 REM. RP12 1 1/4 1330 9400

FEDERAL 209A "HI-SKOR" 800-X 25.0 FED. 12S4 1 1/4 1280 9500 FEDERAL 209A "HI-SKOR" 800-X 26.5 FED. 12S4 1 1/4 1335 10400 FEDERAL 209A "HI-SKOR" 800-X 26. 0 WIN. WAA12 1 1/4 1285 9200 FEDERAL 209A "HI-SKOR" 800-X 27. 5 WIN. WAA12 1 1/4 1335 10100 FEDERAL 209A "HI-SKOR" 800-X 25. 5 REM. SP12 1 1/4 1280 9100 FEDERAL 209A "HI-SKOR" 800-X 27. 0 REM. SP12 1 1/4 1335 9900 FEDERAL 209A "HI-SKOR" 800-X 26.0 CLAYB. CB3118-12AR 1 1/4 1280 8900 FEDERAL 209A "HI-SKOR" 800-X 27.5 CLAYB. CB3118-12AR 1 1/4 1335 9800

REMINGTON 209P "HI-SKOR" 800-X 26.5 FED. 12S4 1 1/4 1285 8900 REMINGTON 209P "HI-SKOR" 800-X 28.0 FED. 12S4 1 1/4 1335 9700 REMINGTON 209P "HI-SKOR" 800-X 27. 0 WIN. WAA12 1 1/4 1275 7900 REMINGTON 209P "HI-SKOR" 800-X 28. 5 WIN. WAA12 1 1/4 1335 9000 REMINGTON 209P "HI-SKOR" 800-X 27. 0 REM. SP12 1 1/4 1270 7700 REMINGTON 209P "HI-SKOR" 800-X 29. 0 REM. SP12 1 1/4 1335 8500 REMINGTON 209P "HI-SKOR" 800-X 27.0 CLAYB. CB3118-12AR 1 1/4 1275 7700 REMINGTON 209P "HI-SKOR" 800-X 29.0 CLAYB. CB3118-12AR 1 1/4 1330 8500

WINCHESTER 209 "HI-SKOR" 800-X 26.0 FED. 12S3 1 1/4 1280 8800 WINCHESTER 209 "HI-SKOR" 800-X 27.5 FED. 12S3 1 1/4 1330 9700 WINCHESTER 209 "HI-SKOR" 800-X 25.5 WIN . WAA12 1 1/4 1265 8600 WINCHESTER 209 "HI-SKOR" 800-X 27.5 WIN . WAA12 1 1/4 1330 9600 WINCHESTER 209 "HI-SKOR" 800-X 2 6.0 REM. SP1 2 1 1/4 1275 8200 WINCHESTER 209 "HI-SKOR" 800-X 2 7.5 REM. SP1 2 1 1/4 1330 9100 WINCHESTER 209 "HI-SKOR" 800-X 26.0 CLAYB. CB3118-12AR 1 1/4 1270 8100 WINCHESTER 209 "HI-SKOR" 800-X 28.0 CLAYB. CB3118-12AR 1 1/4 1335 9300

LEAD MUZZLE CHAMBER

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

12 GAUGE FIELD RELOADING DATA (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: FEDERAL 2 3/4" PLASTIC GOLD MEDAL, TOP GUN, MULTI PURPOSE

FEDERAL 209A PB 22.5 WIN. WAA12R 1 3/ 8 1170 10800 FEDERAL 209A PB 22.5 REM. SP12 1 3/8 1160 10900

REMINGTON 209P PB 26.5 WIN. WAA12R 1 3/ 8 1255 11000 REMINGTON 209P PB 24.5 REM. SP12 1 3/8 1205 11000

WINCHESTER 20 9 PB 2 4.0 WIN. WAA12R 1 3/8 1200 11000 WINCHESTER 20 9 PB 2 3.5 REM. S P12 1 3/8 1185 11100

FEDERAL 209A SR7625 26.0 WIN. WAA12R 1 3/8 1210 11000 FEDERAL 209A SR7625 25.0 REM. SP12 1 3/8 1180 11200

REMINGTON 209P SR7625 28.5 WIN. WAA12R 1 3/8 1255 11000 REMINGTON 209P SR7625 28.0 REM. RP12 1 3/8 1240 11100

WINCHESTER 209 SR7625 27. 0 WIN. WAA12R 1 3/8 1225 11000 WINCHESTER 209 SR7625 26. 5 REM. SP12 13/8 1210 11200

FEDERAL 209A "HI-SKOR" 800-X 26.0 WIN. WAA12R 1 3/8 1280 11000 FEDERAL 209A "HI-SKOR" 800-X 26. 5 REM. SP12 1 3/8 1285 11000 FEDERAL 209A "HI-SKOR" 800-X 25.0 FED. 12S4 1 3/8 1240 10900

REMINGTON 209P "HI-SKOR" 800-X 30.5 WIN. WAA12R 1 3/8 1375 11000 REMINGTON 209P "HI-SKOR" 800-X 32. 0 REM. SP12 1 3/8 1390 11000 REMINGTON 209P "HI-SKOR" 800-X 27.0 FED. 12S4 1 3/8 1260 9700

WINCHESTER 209 "HI-SKOR" 800-X 27.5 WIN . WAA12R 1 3 /8 1310 11000 WINCHESTER 209 "HI-SKOR" 800-X 2 9.0 REM. SP1 2 1 3/ 8 1335 10900 WINCHESTER 209 "HI-SKOR" 800-X 26.0 FED. 12S4 1 3/8 1270 11000

FEDERAL 209A SR4756 31.5 WIN. WAA12R 1 3/8 1305 11000 FEDERAL 209A SR4756 30.0 REM. RP12 1 3/8 1265 10900

REMINGTON 209P SR4756 35.0 WIN. WA12R 1 3/8 1365 10500 REMINGTON 209P SR4756 34.5 REM. RP12 1 3/8 1350 10900

WINCHESTER 209 SR4756 34. 0 WIN. WAA12R 1 3/8 1335 11000 WINCHESTER 209 SR4756 33. 0 REM. RP12 1 3/8 1320 11200

FEDERAL 209A SR7625 25.0 REM. RP12 1 1/2 1140 11400 FEDERAL 209A SR7625 25.5 WIN. WAA12R 1 1/2 1150 11200

REMINGTON 209P SR7625 27.5 REM. RP12 1 1/2 1185 11100 REMINGTON 209P SR7625 28.0 WIN. WAA12R 1 1/2 1170 11000

WINCHESTER 209 SR7625 25. 5 REM. RP12 1 1/2 1140 11000 WINCHESTER 209 SR7625 26. 5 WIN. WAA12R 1 1/2 1160 11000

FEDERAL 209A "HI-SKOR" 800-X 26. 5 REM. SP12 1 1/2 1220 11000 FEDERAL 209A "HI-SKOR" 800-X 26.0 WIN. WAA12R 1 1/2 1215 11200 FEDERAL 209A "HI-SKOR" 800-X 24.5 FED. 12S4 1 1/2 1180 11200

REMINGTON 209P "HI-SKOR" 800-X 28. 5 REM. RP12 1 1/2 1265 11000 REMINGTON 209P "HI-SKOR" 800-X 26.0 RED. 12S4 1 1/2 1190 10400

WINCHESTER 209 "HI-SKOR" 800-X 2 7.0 REM. SP1 2 1 1/ 2 1225 11100 WINCHESTER 209 "HI-SKOR" 800-X 27.0 WIN . WAA12R 1 1 /2 1245 11000 WINCHESTER 209 "HI-SKOR" 800-X 25.0 FED. 12S4 1 1/2 1170 11000

FEDERAL 209A SR4756 27.5 REM. RP12 1 1/2 1160 11000 FEDERAL 209A SR4756 28.0 WIN. WAA12R 1 1/2 1175 11100

REMINGTON 209P SR4756 30.5 REM. RP12 1 1/2 1220 11100 REMINGTON 209P SR4756 30.0 WIN. WAA12R 1 1/2 1165 9000

WINCHESTER 209 SR4756 28. 5 REM. RP12 1 1/2 1175 11000 WINCHESTER 209 SR4756 30. 0 WIN. WAA12R 1 1/2 1205 10800

LEAD MUZZLE CHAMBER

NOTE - ALL DATA SHOWN IS FOR LEAD SHOT. DO NOT ATTEMPT TO LOAD WITH STEEL SHOT AS DANGEROUS LOADS MAY RESULT.

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

12 GAUGE FIELD RELOADING DATA (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: FEDERAL 3" PLASTIC HUNTING CASE PAPER BASEWAD

FEDERAL 209A "HI-SKOR" 800-X 29. 0 REM. R12H 1 1/2 1270 10700 FEDERAL 209A "HI-SKOR" 800-X 27.5 FED. 12S4 1 1/2 1230 10800

REMINGTON 209P "HI-SKOR" 800-X 33. 0 REM. R12H 1 1/2 1335 10600 REMINGTON 209P "HI-SKOR" 800-X 31.0 FED. 12S4 1 1/2 1290 10600

WINCHESTER 209 "HI-SKOR" 800-X 3 0.0 REM. R12H 1 1/ 2 1290 10500 WINCHESTER 209 "HI-SKOR" 800-X 29.0 FED. 12S4 1 1/2 1260 10600

FEDERAL 209A SR4756 33.0 WIN. WAA12R 1 1 /2 1255 10700 FEDERAL 209A SR4756 33.5 REM. RP12 1 1/2 1285 10800

REMINGTON 209P SR4756 37.0 WIN. WAA12R 1 1 /2 1305 9600 REMINGTON 209P SR4756 37.0 REM. RP12 1 1/2 1295 9100

WINCHESTER 209 SR4756 37. 0 WIN. WAA12R 1 1/2 1315 10400 WINCHESTER 209 SR4756 37. 0 REM. RP12 1 1/2 1305 9900

FEDERAL 209A "HI-SKOR" 800-X 26.0 WIN. WAA12R 1 5 /8 1175 10800 FEDERAL 209A "HI-SKOR" 800-X 26. 0 REM. SP12 1 5/8 1175 10800

REMINGTON 209PSTS "HI-SKOR" 800-X 27.5 WI N. WAA12R 1 5/8 1200 10900 REMINGTON 209PSTS "HI-SKOR" 800-X 2 8.0 REM. SP 12 1 5/ 8 1200 10800

WINCHESTER 209 "HI-SKOR" 800-X 28.5 WIN . WAA12R 1 5/ 8 1230 11000 WINCHESTER 209 "HI-SKOR" 800-X 2 9.0 REM. SP1 2 1 5/8 1230 10900

FEDERAL 209A SR4756 31.0 WIN. WAA12R 1 5 /8 1185 10800 FEDERAL 209A SR4756 31.0 REM. RP12 1 5/8 1185 11000

REMINGTON 209PSTS SR4756 35.5 WIN. WAA12R 1 5/8 1250 10900 REMINGTON 209PSTS SR4756 34.5 REM. RP12 1 5/8 1235 10800

WINCHESTER 209 SR4756 35. 5 WIN. WAA12R 1 5/8 1260 10800 WINCHESTER 209 SR4756 36. 0 REM. RP12 1 5/8 1260 10800

FEDERAL 209A "HI-SKOR" 800-X 25.5 WIN. WAA12R 1 3/4 1130 10700 FEDERAL 209A "HI-SKOR" 800-X 25. 0 REM. RP12 1 3 /4 1115 10800

REMINGTON 209P "HI-SKOR" 800-X 28.0 WIN. WAA12R 1 3/4 1175 10600 REMINGTON 209P "HI-SKOR" 800-X 28. 0 REM. RP12 1 3 /4 1170 10500

WINCHESTER 209 "HI-SKOR" 800-X 27.5 WIN . WAA12R 1 3/ 4 1165 10800 WINCHESTER 209 "HI-SKOR" 800-X 2 7.5 REM. RP12 1 3/4 1155 10600

LEAD MUZZLE CHAMBER

SHELL: REMINGTON 2 3/4" PREMIER, RTL, STS, NITRO 27

REMINGTON 209P PB 23.0 REM. SP12 1 1/4 1215 10600 REMINGTON 209P PB 24.5 REM. SP12 1 1/4 1270 11500

FEDERAL 209A SR7625 24.0 REM. SP12 1 1/4 1215 10600 FEDERAL 209A SR7625 25.5 REM. SP12 1 1/4 1265 11500 FEDERAL 209A SR7625 24.0 WIN. WAA12R 1 1 /4 1210 9900 FEDERAL 209A SR7625 26.0 WIN. WAA12R 1 1 /4 1280 11300

REMINGTON 209P SR7625 27.5 REM. SP12 1 1/4 1280 10600 REMINGTON 209P SR7625 28.5 REM. SP12 1 1/4 1330 11500 REMINGTON 209P SR7625 27.0 WIN. WAA12R 1 1 /4 1280 10300 REMINGTON 209P SR7625 28.5 WIN. WAA12R 1 1 /4 1335 11400

WINCHESTER 209 SR7625 26. 5 REM. SP12 1 1/4 1280 10800 WINCHESTER 209 SR7625 27. 5 REM. SP12 1 1/4 1315 11500 WINCHESTER 209 SR7625 27. 0 WIN. WAA12R 1 1/4 1280 10200 WINCHESTER 209 SR7625 29. 0 WIN. WAA12R 1 1/4 1340 11500

FEDERAL 209A SR4756 26.5 REM. RP12 1 1/4 1235 10500 FEDERAL 209A SR4756 28.0 REM. RP12 1 1/4 1300 11500 FEDERAL 209A SR4756 28.0 WIN. WAA12R 1 1 /4 1270 10600 FEDERAL 209A SR4756 29.0 WIN. WAA12R 1 1 /4 1315 11400 FEDERAL 209A SR4756 26.5 FED. 12S4 1 1/4 1230 10700 FEDERAL 209A SR4756 27.5 FED. 12S4 1 1/4 1270 11400

REMINGTON 209P SR4756 30.0 REM. SP12 1 1/4 1275 9300 REMINGTON 209P SR4756 31.5 REM. SP12 1 1/4 1335 10400

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

12 GAUGE FIELD RELOADING DATA (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: REMINGTON 2 3/4" PREMIER, RTL, STS, NITRO 27

FEDERAL 209A "HI-SKOR" 800-X 24. 0 REM. FIG8 1 1/ 4 1270 10200 FEDERAL 209A "HI-SKOR" 800-X 25. 5 REM. FIG8 1 1/ 4 1325 11100 FEDERAL 209A "HI-SKOR" 800-X 24. 0 WINJ. WINDJAMMER 1 1/4 1275 9900 FEDERAL 209A "HI-SKOR" 800-X 25. 5 WINJ. WINDJAMMER 1 1/4 1330 10900 FEDERAL 209A "HI-SKOR" 800-X 24. 0 WIN. WAA12 1 1/4 1275 11400 FEDERAL 209A "HI-SKOR" 800-X 24.0 FED. 12S3 1 1/4 1275 11200

REMINGTON 209P "HI-SKOR" 800-X 24. 5 REM. SP12 1 1/4 1265 9500 REMINGTON 209P "HI-SKOR" 800-X 26. 0 REM. SP12 1 1/4 1320 10200 REMINGTON 209P "HI-SKOR" 800-X 25. 0 WINJ. WINDJAMMER 1 1/4 1265 9000 REMINGTON 209P "HI-SKOR" 800-X 26. 5 WINJ. WINDJAMMER 1 1/4 1325 10000 REMINGTON 209P "HI-SKOR" 800-X 24. 5 WIN. WAA12 1 1/4 1275 10300 REMINGTON 209P "HI-SKOR" 800-X 26. 0 WIN. WAA12 1 1/4 1325 11100 REMINGTON 209P "HI-SKOR" 800-X 24.5 FED. 12S3 1 1/4 1270 10500 REMINGTON 209P "HI-SKOR" 800-X 26.0 FED. 12S3 1 1/4 1320 11400

WINCHESTER 209 "HI-SKOR" 800-X 2 4.5 REM. SP1 2 1 1/ 4 1280 10100 WINCHESTER 209 "HI-SKOR" 800-X 2 6.0 REM. SP1 2 1 1/ 4 1335 11000 WINCHESTER 209 "HI-SKOR" 800-X 24.5 WINJ . WINDJA MME R 1 1/4 1275 9700 WINCHESTER 209 "HI-SKOR" 800-X 24.5 WIN . WAA12 1 1/4 1285 11000 WINCHESTER 209 "HI-SKOR" 800-X 25.5 WIN . WAA12 1 1/4 1320 11500 WINCHESTER 209 "HI-SKOR" 800-X 24.5 FED. 12S4 1 1/4 1275 10600 WINCHESTER 209 "HI-SKOR" 800-X 26.0 FED. 12S4 1 1/4 1330 11500

FEDERAL 209A PB 19.5 WIN. WAA12R 1 3/ 8 1105 10900 FEDERAL 209A PB 19.5 REM. SP12 1 3/8 1090 11000

REMINGTON 209P PB 21.5 WIN. WAA12R 1 3/ 8 1150 10900 REMINGTON 209P PB 21.0 REM. SP12 1 3/8 1130 11000

WINCHESTER 20 9 PB 2 1.5 WIN. WAA12R 1 3/8 1145 11000 WINCHESTER 20 9 PB 2 0.5 REM. RP 12 1 3/8 1120 11100

FEDERAL 209A SR7625 21.5 WIN. WAA12R 1 3/8 1100 10800 FEDERAL 209A SR7625 22.0 REM. SP12 1 3/8 1110 11200

REMINGTON 209P SR7625 25.0 WIN. WAA12R 1 3/8 1185 11000 REMINGTON 209P SR7625 24.5 REM. RP12 1 3/8 1165 10800

WINCHESTER 209 SR7625 23. 5 WIN. WAA12R 1 3/8 1145 10900 WINCHESTER 209 SR7625 23. 0 REM. RP12 1 3/8 1140 11100

FEDERAL 209A "HI-SKOR" 800-X 23.0 WIN. WAA12R 1 3/8 1215 11000 FEDERAL 209A "HI-SKOR" 800-X 22. 5 REM. RP12 1 3/8 1205 11000 FEDERAL 209A "HI-SKOR" 800-X 21.5 FED. 12S4 1 3/8 1155 10900

REMINGTON 209P "HI-SKOR" 800-X 25.5 WIN. WAA12R 1 3/8 1270 11100 REMINGTON 209P "HI-SKOR" 800-X 26. 5 REM. SP12 1 3/8 1275 11000 REMINGTON 209P "HI-SKOR" 800-X 24.0 FED. 12S4 1 3/8 1225 11100

WINCHESTER 209 "HI-SKOR" 800-X 24.5 WIN . WAA12R 1 3 /8 1240 10900 WINCHESTER 209 "HI-SKOR" 800-X 2 4.0 REM. SP1 2 1 3/ 8 1230 11000 WINCHESTER 209 "HI-SKOR" 800-X 22.5 FED. 12S3 1 3/8 1180 11100

FEDERAL 209A SR4756 26.0 WIN. WAA12R 1 3/8 1205 11100 FEDERAL 209A SR4756 26.0 REM. SP12 1 3/8 1175 11000

REMINGTON 209P SR4756 30.5 WIN. WAA12R 1 3/8 1290 11100 REMINGTON 209P SR4756 30.0 REM. SP12 1 3/8 1260 10900

WINCHESTER 209 SR4756 28. 5 WIN. WAA12R 1 3/8 1230 10900 WINCHESTER 209 SR4756 29. 0 REM. RP12 1 3/8 1250 11100

FEDERAL 209A SR7625 21.0 REM. RP12 1 1/2 1040 11000 FEDERAL 209A SR7625 21.5 WIN. WAA12R 1 1/2 1055 11000

REMINGTON 209P SR7625 23.5 REM. RP12 1 1/2 1090 11200 REMINGTON 209P SR7625 23.5 WIN. WAA12R 1 1/2 1085 11000

WINCHESTER 209 SR7625 22. 5 REM. RP12 1 1/2 1080 11200 WINCHESTER 209 SR7625 23. 0 WIN. WAA12R 1 1/2 1080 11000

LEAD MUZZLE CHAMBER

NOTE - ALL DATA SHOWN IS FOR LEAD SHOT. DO NOT ATTEMPT TO LOAD WITH STEEL SHOT AS DANGEROUS LOADS MAY RESULT.

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

12 GAUGE FIELD RELOADING DATA (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: REMINGTON 2 3/4" PREMIER, RTL, STS, NITRO 27

FEDERAL 209A "HI-SKOR" 800-X 22. 0 REM. RP12 1 1 /2 1130 11200 FEDERAL 209A "HI-SKOR" 800-X 22.5 WIN. WAA12R 1 1/2 1140 11300

REMINGTON 209P "HI-SKOR" 800-X 23. 0 REM. RP12 1 1 /2 1155 11200 REMINGTON 209P "HI-SKOR" 800-X 23.5 WIN. WAA12R 1 1/2 1170 11200

WINCHESTER 209 "HI-SKOR" 800-X 2 2.5 REM. RP12 1 1/2 1140 11300 WINCHESTER 209 "HI-SKOR" 800-X 23.0 WIN . WAA12R 1 1/ 2 1150 11200

FEDERAL 209A SR4756 23.5 REM. RP12 1 1/2 1075 11000 FEDERAL 209A SR4756 24.0 WIN. WAA12R 1 1 /2 1090 11000

REMINGTON 209P SR4756 27.0 REM. RP12 1 1/2 1150 11200 REMINGTON 209P SR4756 27.5 WIN. WAA12R 1 1 /2 1160 11000

WINCHESTER 209 SR4756 25. 5 REM. RP12 1 1/2 1115 11000 WINCHESTER 209 SR4756 26. 5 WIN. WAA12R 1 1/2 1130 11200

SHELL: REMINGTON 3" NITRO PLASTIC BASEWAD

WINCHESTER 209 SR7625 33. 5 REM. SP12 1 1/2 1280 10700 WINCHESTER 209 SR7625 34. 0 REM. RXP12 1 1/2 1285 10600

WINCHESTER 209 SR4756 38. 5 REM. SP12 1 1/2 1345 10500 WINCHESTER 209 "HI-SKOR" 800-X 29.5 WIN . WAA12 1 1/2 1285 10800

WINCHESTER 209 "HI-SKOR" 800-X 3 0.5 REM. SP1 2 1 1/2 1300 10600 FEDERAL 209A "HI-SKOR" 800-X 25. 5 WIN. WAA12 1 5/8 1160 10900

FEDERAL 209A "HI-SKOR" 800-X 25. 5 REM. R12H 1 5/8 1160 10900 REMINGTON 209PSTS "HI-SKOR" 800-X 2 7.5 WIN. WAA12 1 5/8 1205 10800

REMINGTON 209PSTS "HI-SKOR" 800-X 2 8.0 REM. SP 12 1 5/ 8 1210 10900 WINCHESTER 209 "HI-SKOR" 800-X 28.0 WIN . WAA12 1 5/8 1210 10800

WINCHESTER 209 "HI-SKOR" 800-X 2 8.0 REM. SP1 2 1 5/8 1210 10800 FEDERAL 209A SR4756 30.0 WIN. WAA12R 1 5 /8 1180 11000

FEDERAL 209A SR4756 30.5 REM. RP12 1 5/8 1175 10900 REMINGTON 209PSTS SR4756 34.0 WIN. WAA12R 1 5/8 1240 10900

REMINGTON 209PSTS SR4756 34.0 REM. RP12 1 5/8 1235 10900 WINCHESTER 209 SR4756 35. 0 WIN. WAA12R 1 5/8 1250 11000

WINCHESTER 209 SR4756 33. 5 REM. RP12 1 5/8 1230 10800

LEAD MUZZLE CHAMBER

SHELL: WINCHESTER 2 3/4" AA

FEDERAL 209A "HI-SKOR" 700-X 17. 0 WINJ. WINDJAMMER 1 1/4 1140 11500 REMINGTON 209P "HI-SKOR" 700-X 19. 0 WINJ. WINDJAMMER 1 1/4 1200 11200 WINCHESTER 209 "HI-SKOR" 700-X 17.5 WINJ . WINDJA MME R 1 1/4 1150 11400

WINCHESTER 20 9 PB 2 3.5 WIN. WAA12R 1 1/4 1220 10500 WINCHESTER 20 9 PB 2 5.0 WIN. WAA12R 1 1/4 1270 11500

FEDERAL 209A SR7625 26.5 WIN. WAA12R 1 1 /4 1285 10900 FEDERAL 209A SR7625 27.5 WIN. WAA12R 1 1 /4 1320 11500 FEDERAL 209A SR7625 26.0 REM. SP12 1 1/4 1275 11000 FEDERAL 209A SR7625 27.0 REM. SP12 1 1/4 1310 11500

REMINGTON 209P SR7625 28.0 WIN. WAA12R 1 1 /4 1270 9100 REMINGTON 209P SR7625 29.5 WIN. WAA12R 1 1/4 1325 10300 REMINGTON 209P SR7625 28.0 REM. SP12 1 1/4 1290 10200 REMINGTON 209P SR7625 29.0 REM. SP12 1 1/4 1325 10900 REMINGTON 209P SR7625 26.5 FED. 12S4 1 1/4 1265 10700 REMINGTON 209P SR7625 28.0 FED. 12S4 1 1/4 1315 11500

WINCHESTER 209 SR7625 27. 0 WIN. WAA12 1 1/4 1275 11000 WINCHESTER 209 SR7625 28. 0 WIN. WAA12 1 1/4 1310 11500 WINCHESTER 209 SR7625 27. 5 REM. SP12 1 1/4 1275 10300 WINCHESTER 209 SR7625 29. 0 REM. SP12 1 1/4 1325 11400 WINCHESTER 209 SR7625 25. 0 FED. 12S4 1 1/4 1215 10200 WINCHESTER 209 SR7625 26. 5 FED. 12S4 1 1/4 1270 11400

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

FEDERAL 209A SR4756 28.5 WIN. WAA12R 1 1 /4 1280 10600 FEDERAL 209A SR4756 30.0 WIN. WAA12R 1 1 /4 1330 11500 FEDERAL 209A SR4756 26.0 FED. 12S4 1 1/4 1225 10700 FEDERAL 209A SR4756 27.5 FED. 12S4 1 1/4 1270 11500 FEDERAL 209A SR4756 28.5 REM. SP12 1 1/4 1285 10800 FEDERAL 209A SR4756 29.5 REM. SP12 1 1/4 1325 11500

12 GAUGE FIELD RELOADING DATA (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: WINCHESTER 2 3/4" AA

REMINGTON 209P SR4756 31.5 WIN. WAA12R 1 1/4 1270 8200 REMINGTON 209P SR4756 33.0 WIN. WAA12R 1 1/4 1330 9000 REMINGTON 209P SR4756 29.5 FED. 12S4 1 1/4 1230 8400 REMINGTON 209P SR4756 30.5 REM. RP12 1 1/4 1275 9600 REMINGTON 209P SR4756 31.5 REM. RP12 1 1/4 1330 10600

WINCHESTER 209 SR4756 30. 5 WIN. WAA12R 1 1/4 1280 9400 WINCHESTER 209 SR4756 32. 0 WIN. WAA12R 1 1/4 1335 10300 WINCHESTER 209 SR4756 26. 5 FED. 12S4 1 1/4 1180 9000 WINCHESTER 209 SR4756 27. 5 FED. 12S4 1 1/4 1220 9500 WINCHESTER 209 SR4756 30. 0 REM. SP12 1 1/4 1285 10000 WINCHESTER 209 SR4756 31. 5 REM. SP12 1 1/4 1340 11000

FEDERAL 209A "HI-SKOR" 800-X 24. 5 WIN. WAA12 1 1/4 1270 10400 FEDERAL 209A "HI-SKOR" 800-X 26. 0 WIN. WAA12 1 1/4 1325 11400 FEDERAL 209A "HI-SKOR" 800-X 24. 5 WINJ. WINDJAMMER 1 1/4 1270 9300 FEDERAL 209A "HI-SKOR" 800-X 26. 0 WINJ. WINDJAMMER 1 1/4 1320 10000 FEDERAL 209A "HI-SKOR" 800-X 25. 0 REM. SP12 1 1/4 1275 9800 FEDERAL 209A "HI-SKOR" 800-X 26. 5 REM. SP12 1 1/4 1325 10700 FEDERAL 209A "HI-SKOR" 800-X 24.5 FED. 12S4 1 1/4 1270 10600 FEDERAL 209A "HI-SKOR" 800-X 26.0 FED. 12S4 1 1/4 1325 11500

REMINGTON 209P "HI-SKOR" 800-X 27. 0 WIN. WAA12 1 1/4 1275 8200 REMINGTON 209P "HI-SKOR" 800-X 28. 5 WIN. WAA12 1 1/4 1335 9600 REMINGTON 209P "HI-SKOR" 800-X 26. 0 WINJ. WINDJAMMER 1 1/4 1270 8100 REMINGTON 209P "HI-SKOR" 800-X 28. 5 WINJ. WINDJAMMER 1 1/4 1325 9000 REMINGTON 209P "HI-SKOR" 800-X 27. 5 REM. SP12 1 1/4 1280 7800 REMINGTON 209P "HI-SKOR" 800-X 29. 0 REM. SP12 1 1/4 1325 8500 REMINGTON 209P "HI-SKOR" 800-X 26.0 FED. 12S4 1 1/4 1265 8600 REMINGTON 209P "HI-SKOR" 800-X 27.5 FED. 12S4 1 1/4 1320 9600

WINCHESTER 209 "HI-SKOR" 800-X 25.0 WIN . WAA12 1 1/4 1270 9900 WINCHESTER 209 "HI-SKOR" 800-X 26.5 WIN . WAA12 1 1/4 1320 10700 WINCHESTER 209 "HI-SKOR" 800-S 25.5 WINJ . WINDJA MME R 1 1/4 1275 9000 WINCHESTER 209 "HI-SKOR" 800-X 27.0 WINJ . WINDJA MME R 1 1/4 1330 10000 WINCHESTER 209 "HI-SKOR" 800-X 2 5.0 REM. SP1 2 1 1/ 4 1270 9400 WINCHESTER 209 "HI-SKOR" 800-X 2 6.5 REM. SP1 2 1 1/ 4 1325 10200 WINCHESTER 209 "HI-SKOR" 800-X 25.0 FED. 12S3 1 1/4 1275 10000 WINCHESTER 209 "HI-SKOR" 800-X 26.5 FED. 12S3 1 1/4 1330 10900

FEDERAL 209A PB 20.0 WIN. WAA12R 1 3/ 8 1105 11200 FEDERAL 209A PB 19.5 REM. RP12 1 3/8 1090 11100

REMINGTON 209P PB 22.5 WIN. WAA12R 1 3/ 8 1165 11100 REMINGTON 209P PB 22.0 REM. RP12 1 3/8 1150 11200

WINCHESTER 20 9 PB 2 1.0 WIN. WAA12R 1 3/8 1125 10900 WINCHESTER 20 9 PB 2 0.5 REM. S P12 1 3/8 1115 11100

FEDERAL 209A SR7625 22.5 WIN. WAA12R 1 3/8 1130 11000 FEDERAL 209A SR7625 23.0 REM. SP12 1 3/8 1130 11100

REMINGTON 209P SR7625 26.0 WIN. WAA12R 1 3/8 1190 11000 REMINGTON 209P SR7625 24.5 REM. SP12 1 3/8 1155 10900

WINCHESTER 209 SR7625 24. 0 WIN. WAA12R 1 3/8 1155 11200 WINCHESTER 209 SR7625 24. 0 REM. SP12 1 3/8 1150 10900

FEDERAL 209A "HI-SKOR" 800-X 25.5 WIN. WAA12R 1 3/8 1260 11000 FEDERAL 209A "HI-SKOR" 800-X 25. 0 REM. SP12 1 3/8 1245 11100 FEDERAL 209A "HI-SKOR" 800-X 22.5 FED. 12S4 1 3/8 1180 11100

REMINGTON 209P "HI-SKOR" 800-X 29.0 WIN. WAA12R 1 3/8 1320 10100 REMINGTON 209P "HI-SKOR" 800-X 30. 0 REM. RP12 1 3/8 1345 11200 REMINGTON 209P "HI-SKOR" 800-X 27.0 FED. 12S4 1 3/8 1280 11100

WINCHESTER 209 "HI-SKOR" 800-X 26.0 WIN . WAA12R 1 3 /8 1275 11000 WINCHESTER 209 "HI-SKOR" 800-X 2 6.0 REM. SP1 2 1 3/ 8 1270 11100 WINCHESTER 209 "HI-SKOR" 800-X 23.5 FED. 12S4 1 3/8 1200 11100

LEAD MUZZLE CHAMBER

NOTE - ALL DATA SHOWN IS FOR LEAD SHOT. DO NOT ATTEMPT TO LOAD WITH STEEL SHOT AS DANGEROUS LOADS MAY RESULT.

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

12 GAUGE FIELD RELOADING DATA (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: WINCHESTER 2 3/4" AA

FEDERAL 209A SR4756 27.0 WIN. WAA12R 1 3 /8 1185 10900 FEDERAL 209A SR4756 27.5 REM. SP12 1 3/8 1210 11200

REMINGTON 209P SR4756 32.0 WIN. WAA12R 1 3 /8 1290 10600 REMINGTON 209P SR4756 31.0 REM. RP12 1 3/8 1265 10900

WINCHESTER 209 SR4756 30. 0 WIN. WAA12R 1 3/8 1265 11200 WINCHESTER 209 SR4756 28. 5 REM. SP12 1 3/8 1230 11000

SHELL: WINCHESTER 3" AA PLASTIC BASEWAD

FEDERAL 209A "HI-SKOR" 800-X 28. 0 WIN. WAA12 1 5/8 1210 10800 FEDERAL 209A "HI-SKOR" 800-X 28. 5 REM. RXP12 1 5/8 1220 11000

REMINGTON 209PSTS "HI-SKOR" 800-X 3 0.0 WIN. WAA12 1 5/8 1250 10900 REMINGTON 209PSTS "HI-SKOR" 800-X 3 1.5 REM. RXP12 1 5/8 1265 11000

WINCHESTER 209 "HI-SKOR" 800-X 30.5 WIN . WAA12 1 5/8 1260 11000 WINCHESTER 209 "HI-SKOR" 800-X 30.5 REM. RXP12 1 5/8 1255 11000

FEDERAL 209A SR4756 31.0 WIN. WAA12F114 1 5/8 1180 10800 FEDERAL 209A SR4756 33.0 REM. SP12 1 5/8 1225 10900

REMINGTON 209PSTS SR4756 37.5 2IN. WAA12R 1 5/ 8 1290 11000 REMINGTON 209PSTS SR4756 35.5 REM. RP12 1 5/8 1265 10900

WINCHESTER 209 SR4756 38. 5 WIN. WAA12R 1 5/8 1295 10900 WINCHESTER 209 SR4756 37. 5 REM. RP12 1 5/8 1290 11000

LEAD MUZZLE CHAMBER

16 GAUGE FIELD RELOADING DATA

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: FEDERAL 2 3/4" GAME

FEDERAL 209A "HI-SKOR" 700-X 15.5 WIN. WAA16 1 1175 11000 REMINGTON 209P "HI-SKOR" 700-X 16.5 WIN. WAA16 1 1210 11200 WINCHESTER 209 "HI-SKOR" 700-X 16.0 WIN. WAA16 1 1195 11200

FEDERAL 209A PB 21.5 WIN. WAA16 1 1280 11000 REMINGTON 209P PB 25.0 REM. SP16 1 1360 11200 WINCHESTER 209 PB 23.5 WIN. WAA16 1 1330 11200

FEDERAL 209A SR7625 24.5 WIN. WAA16 1 1340 11000 REMINGTON 209P SR7625 26.5 REM. SP16 1 1375 10400 WINCHESTER 209 SR7625 25. 0 WIN. WAA16 1 1330 9900

FEDERAL 209A "HI-SKOR" 800-X 24.0 REM. SP16 1 1385 10400 REMINGTON 209P "HI-SKOR" 800-X 25.0 REM. SP16 1 1350 8300 WINCHESTER 209 "HI-SKOR" 800-X 24.5 WIN. WAA16 1 1390 10200

FEDERAL 209A SR4756 25.0 WIN. WAA16 1 1240 8500 REMINGTON 209P SR4756 27.0 REM. SP16 1 1210 6400 WINCHESTER 209 SR4756 25. 0 WIN. WAA16 1 1210 7200

FEDERAL 209A PB 19.0 REM. SP16 1 1/8 1145 10800 REMINGTON 209P PB 21.0 REM. SP16 1 1/8 1205 10500 WINCHESTER 20 9 PB 20 .5 REM. SP 16 1 1/8 1195 11000

FEDERAL 209A SR7625 22.0 REM. SP16 1 1/8 1220 11000 REMINGTON 209P SR7625 23.0 REM. SP16 1 1/8 1200 9000 WINCHESTER 209 SR7625 23. 0 REM. SP16 1 1/8 1240 10800

FEDERAL 209A "HI-SKOR"800-X 22. 5 REM. SP16 1 1/8 1285 11000 REMINGTON 209P "HI-SKOR" 800-X 24. 5 REM. SP16 1 1/8 1310 10100 WINCHESTER 209 "HI-SKOR" 800-X 2 2.5 REM. SP1 6 1 1/8 1285 10800

FEDERAL 209A SR4756 23.0 REM. SP16 1 1/8 1150 8400 REMINGTON 209P SR4756 23.0 REM. SP16 1 1/8 1045 6200 WINCHESTER 209 SR4756 23. 0 REM. SP16 1 1/8 1120 7700

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

LEAD MUZZLE CHAMBER

16 GAUGE FIELD RELOADING DATA (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: REMINGTON 2 3/4" GAME (BLACK)

FEDERAL 209A "HI-SKOR" 700-X 13.0 WIN. WAA16 1 1095 11000 REMINGTON 209P "HI-SKOR" 700-X 14.5 WIN. WAA16 1 1150 11000 WINCHESTER 209 "HI-SKOR" 700-X 13.5 WIN. WAA16 1 1120 11200

FEDERAL 209A PB 17.5 REM. SP16 1 1180 11200 REMINGTON 209P PB 20.0 REM. SP16 1 1240 10700 WINCHESTER 209 PB 19.0 WIN. WAA16 1 1210 11000

FEDERAL 209A SR7625 21.0 REM. SP16 1 1250 11200 REMINGTON 209P SR7625 23.5 REM. SP16 1 1310 11200 WINCHESTER 209 SR7625 22. 5 WIN. WAA16 1 1285 11200

FEDERAL 209A "HI-SKOR" 800-X 20.5 REM. SP16 1 1295 11200 REMINGTON 209P "HI-SKOR" 800-X 24.0 REM. SP16 1 1390 11100 WINCHESTER 209 "HI-SKOR" 800-X 21.5 WIN. WAA16 1 1315 11000

FEDERAL 209A SR4756 23.5 REM. SP16 1 1280 11000 REMINGTON 209P SR4756 29.0 REM. SP16 1 1380 10100 WINCHESTER 209 SR4756 22. 0 WIN. WAA16 1 1160 8200

FEDERAL 209A PB 16.5 REM. SP16 1 1/8 1090 11000 REMINGTON 209P PB 18.5 REM. SP16 1 1/8 1140 11000 WINCHESTER 20 9 PB 1 8.0 REM. S P16 1 1/8 1120 11100

FEDERAL 209A SR7625 19.5 REM. SP16 1 1/8 1140 11000 REMINGTON 209P SR7625 22.0 REM. SP16 1 1/8 1210 11000 WINCHESTER 209 SR7625 21. 0 REM. SP16 1 1/8 1180 10900

FEDERAL 209A "HI-SKOR" 800-X 19. 0 REM. SP16 1 1/8 1195 10800 REMINGTON 209P "HI-SKOR" 800-X 21. 0 REM. SP16 1 1/8 1240 10800 WINCHESTER 209 "HI-SKOR" 800-X 1 9.5 REM. SP1 6 1 1/ 8 1220 10900

FEDERAL 209A SR4756 22.0 REM. SP16 1 1/8 1185 10900 REMINGTON 209P SR4756 24.0 REM. SP16 1 1/8 1175 9500 WINCHESTER 209 SR4756 23. 5 REM. SP16 1 1/8 1220 11000

LEAD MUZZLE CHAMBER

SHELL: WINCHESTER 2 3/4" X-PERT

FEDERAL 209A "HI-SKOR" 700-X 12.5 WIN. WAA16 1 1085 11000 REMINGTON 209P "HI-SKOR" 700-X 14.5 WIN. WAA16 1 1145 11000 WINCHESTER 209 "HI-SKOR" 700-X 13.0 WIN. WAA16 1 1105 11000

FEDERAL 209A PB 19.5 WIN. WAA16 1 1240 11200 REMINGTON 209P PB 21.0 REM. SP16 1 1265 10800 WINCHESTER 209 PB 19.0 WIN. WAA16 1 1220 10900

FEDERAL 209A SR7625 20.5 WIN. WAA16 1 1230 10900 REMINGTON 209P SR7625 23.0 REM. SP16 1 1290 11200 WINCHESTER 209 SR7625 22. 0 WIN. WAA16 1 1270 11000

FEDERAL 209A "HI-SKOR" 800-X 22.5 WIN. WAA16 1 1350 10800 REMINGTON 209P "HI-SKOR" 800-X 24.0 REM. SP16 1 1350 9000 WINCHESTER 209 "HI-SKOR" 800-X 23.0 WIN. WAA16 1 1360 11200

FEDERAL 209A SR4756 22.5 REM. SP16 1 1245 10900 REMINGTON 209P SR4756 27.0 REM. SP16 1 1335 9900 WINCHESTER 209 SR4756 21. 0 WIN. WAA16 1 1130 7800

FEDERAL 209A PB 16.0 REM. SP16 1 1/8 1075 11100 REMINGTON 209P PB 18.5 REM. SP16 1 1/8 1145 11100 WINCHESTER 20 9 PB 1 7.0 REM. S P16 1 1/8 1100 10800

FEDERAL 209A SR7625 18.0 REM. SP16 1 1/8 1100 10800 REMINGTON 209P SR7625 19.5 REM. SP16 1 1/8 1160 10900 WINCHESTER 209 SR7625 19. 0 REM. SP16 1 1/8 1140 10900

FEDERAL 209A "HI-SKOR" 800-X 19. 0 REM. SP16 1 1/8 1180 10900 REMINGTON 209P "HI-SKOR" 800-X 22. 0 REM. SP16 1 1/8 1245 10100 WINCHESTER 209 "HI-SKOR" 800-X 2 0.0 REM. SP1 6 1 1/ 8 1210 11000

FEDERAL 209A SR4756 20.5 REM. SP16 1 1/8 1150 10800 REMINGTON 209P SR4756 23.0 REM. SP16 1 1/8 1150 8900 WINCHESTER 209 SR4756 22. 5 REM. SP16 1 1/8 1200 11100

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

NOTE - ALL DATA SHOWN IS FOR LEAD SHOT. DO NOT ATTEMPT TO LOAD WITH STEEL SHOT AS DANGEROUS LOADS MAY RESULT.

20 GAUGE FIELD RELOADING DATA

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: FEDERAL 2 3/4" PLASTIC TARGET/HUNTING

FEDERAL 209A SR7625 19.0 WIN. WAA20F1 1 1205 11700 REMINGTON 209P SR7625 21.0 REM SP20 1 1240 11400 WINCHESTER 209 SR7625 20. 5 WIN. WAA20F1 1 1235 11600

FEDERAL 209A "HI-SKOR" 800-X 19.0 FED 20S1 1 1255 11500 FEDERAL 209A "HI-SKOR" 800-X 18.5 REM. SP20 1 1245 11600 FEDERAL 209A "HI-SKOR" 800-X 19.0 WIN.WAA20F1 1 1270 11800

REMINGTON 209P "HI-SKOR" 800-X 20.0 FED. 20S1 1 1275 11100 REMINGTON 209P "HI-SKOR" 800-X 21.0 REM. SP20 1 1320 11400 REMINGTON 209P "HI-SKOR" 800-X 21.0 WIN.WAA20F1 1 1330 11600

WINCHESTER 209 "HI-SKOR" 800-X 19.5 FED. 20S1 1 1270 11600 WINCHESTER 209 "HI-SKOR" 800-X 20.0 REM . SP20 1 1290 11700 WINCHESTER 209 "HI-SKOR" 800-X 19.5 WIN . WAA20F1 1 1285 11500

SHELL: FEDERAL 3" MAGNUM PAPER BASE WAD

FEDERAL 209A PB 17.0 FED. 20S1 1 1/8 1080 11300 FEDERAL 209A PB 18.0 REM. RXP20 1 1/8 1130 11500 FEDERAL 209A PB 17.5 2IN. WAA20 1 1/8 1110 11600

REMINGTON 209P PB 19.0 FED. 2051 1 1/8 1140 11600 REMINGTON 209P PB 20.0 REM. RXP20 1 1/8 1175 11400

WINCHESTER 209 PB 19.0 FED. 20S1 1 1/8 1160 11700 WINCHESTER 209 PB 18.0 REM. RXP20 1 1/8 1120 11400 WINCHESTER 20 9 PB 17 .0 WIN. WAA20 1 1/8 1090 11400

FEDERAL 209A "HI-SKOR" 800-X 19.0 FED. 20S1 1 1/8 1200 11600 FEDERAL 209A "HI-SKOR" 800-X 19. 5 REM. RXP20 1 1/8 1215 11500 FEDERAL 209A "HI-SKOR" 800-X 19. 5 WIN. WAA20 1 1/8 1210 11500

REMINGTON 209P "HI-SKOR" 800-X 22.0 FED. 20S1 1 1/8 1275 11700 REMINGTON 209P "HI-SKOR" 800-X 21. 0 REM. SP20 1 1/8 1255 11600 REMINGTON 209P "HI-SKOR" 800-X 22. 0 WIN. WAA20 1 1/8 1275 11400

WINCHESTER 209 "HI-SKOR" 800-X 19.5 FED. 20S1 1 1/8 1210 11600 WINCHESTER 209 "HI-SKOR" 800-X 1 9.5 REM. SP2 0 1 1/8 1210 11500 WINCHESTER 209 "HI-SKOR" 800-X 19.0 WIN . WAA20 1 1/8 1200 11400

FEDERAL 209A SR4756 21.0 FED. 20S1 1 1/8 1165 11400 FEDERAL 209A SR4756 21.5 REM. SP20 1 1/8 1190 11700 FEDERAL 209A SR4756 20.5 WIN. WAA20 1 1/8 1160 11700

REMINGTON 209P SR4756 24.0 FED. 20S1 1 1/8 1235 11200 REMINGTON 209P SR4756 24.5 REM. SP20 1 1/8 1250 11200 REMINGTON 209P SR4756 24.0 WIN. WAA20 1 1/8 1240 11000

WINCHESTER 209 SR4756 21. 5 FED. 20S1 1 1/8 1185 11300 WINCHESTER 209 SR4756 23. 0 REM. SP20 1 1/8 1215 11500 WINCHESTER 209 SR4756 22. 5 WIN. WAA20 1 1/8 1215 11700

FEDERAL 209A "HI-SKOR" 800-X 17. 5 REM. SP20 1 1/4 1095 11500 FEDERAL 209A "HI-SKOR" 800-X 18.0 WIN. WAA20F1 1 1/4 1115 11700

REMINGTON 209P "HI-SKOR" 800-X 19. 5 REM. SP20 1 1/4 1155 11400 REMINGTON 209P "HI-SKOR" 800-X 20.0 WIN. WAA20F1 1 1/4 1170 11000

WINCHESTER 209 "HI=SKOR" 800-X 18.0 REM. SP20 1 1/4 1105 11400 WINCHESTER 209 "HI-SKOR" 800-X 18.5 WIN . WAA20F1 1 1/4 1130 11400

LEAD MUZZLE CHAMBER

SHELL: REMINGTON 2 3/4" PREMIER (RTL)

FEDERAL 209A SR7625 14.5 WIN. WAA20F1 1 1060 11400 FEDERAL 209A SR7625 14.5 REM. SP20 1 1055 11500

REMINGTON 209P SR7625 16.5 WIN. WAA20F1 1 1125 11800 REMINGTON 209P SR7625 16.0 REM. SP20 1 1105 11600

WINCHESTER 209 SR7626 16. 0 WIN. WAA20F1 1 1110 11800 WINCHESTER 209 SR7625 16. 0 REM. SP20 1 1105 11400

FEDERAL 209A "HI-SKOR" 800-X 15.0 FED. 20S1 1 1115 11400

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

FEDERAL 209A "HI-SKOR" 800-X 16.0 REM. SP20 1 1170 11800 FEDERAL 209A "HI-SKOR" 800-X 15.5 WIN.WAA20F1 1 1150 11800

REMINGTON 209P "HI-SKOR" 800-X 16.0 FED. 20S1 1 1160 11200 REMINGTON 209P "HI-SKOR" 800-X 17.5 REM. SP20 1 1220 11900 REMINGTON 209P "HI-SKOR" 800-X 17.0 WIN.WAA20F1 1 1205 11700

20 GAUGE FIELD RELOADING DATA (Cont'd)

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: REMINGTON 2 3/4" PREMIER (RTL)

WINCHESTER 209 "HI-SKOR" 800-X 16.0 FED. 20S1 1 1160 11700 WINCHESTER 209 "HI-SKOR" 800-X 17.0 REM. RXP20 1 1200 11800 WINCHESTER 209 "HI-SKOR" 800-X 16.5 WIN . WAA20F1 1 1185 11800

FEDERAL 209A SR4756 17.0 REM. SP20 1 1125 11800 REMINGTON 209P SR4756 19.5 REM. SP20 1 1185 11500 WINCHESTER 209 SR4756 18. 5 REM. SP20 1 1160 11700

SHELL: REMINGTON 3" UNIBODY

FEDERAL 209A "HI-SKOR" 800-X 15.5 FED. 20C1 1 1/8 1095 11600 FEDERAL 209A "HI-SKOR" 800-X 15. 5 REM. SP20 1 1/8 1105 11800 FEDERAL 209A "HI-SKOR" 800-X 15. 5 WIN. WAA20 1 1/8 1095 11600

REMINGTON 209P "HI-SKOR" 800-X 17.0 FED. 20C1 1 1/8 1145 11600 REMINGTON 209P "HI-SKOR" 800-X 17. 0 REM. SP20 1 1/8 1150 11700 REMINGTON 209P "HI-SKOR" 800-X 16. 0 WIN. WAA20 1 1/8 1110 11100

WINCHESTER 209 "HI-SKOR" 800-X 16.5 FED. 20C1 1 1/8 1120 11500 WINCHESTER 209 "HI-SKOR" 800-X 1 6.0 REM. SP2 0 1 1/ 8 1100 11600 WINCHESTER 209 "HI-SKOR" 800-X 16.0 WIN . WAA20 1 1/8 1110 11600

SHELL: REMINGTON 3" UNIBODY

FEDERAL 209A "HI-SKOR" 800-X 14. 5 REM. SP20 1 1/4 1020 11700 REMINGTON 209P "HI-SKOR" 800-X 16. 0 REM. SP20 1 1/4 1070 11700 WINCHESTER 209 "HI-SKOR" 800-X 1 5.0 REM. SP2 0 1 1/ 4 1035 11600

LEAD MUZZLE CHAMBER

SHELL: WINCHESTER 2 3/4" SUPER-X

FEDERAL 209A SR7625 14.0 WIN. WAA20F1 1 1040 11400 FEDERAL 209A SR7625 14.5 REM. RXP20 1 1060 11600

REMINGTON 209P SR7625 15.0 WIN. WAA20F1 1 1065 10900 REMINGTON 209P SR7625 15.0 REM. RXP20 1 1050 9800

WINCHESTER 209 SR7625 14. 5 WIN. WAA20F1 1 1060 11400 WINCHESTER 209 SR7625 15. 0 REM. RXP20 1 1065 11300

FEDERAL 209A "HI-SKOR" 800-X 14.5 WIN.WAA20F1 1 1130 11800 FEDERAL 209A "HI-SKOR" 800-X 15.0 REM. RXP20 1 1135 11700

REMINGTON 209P "HI-SKOR" 800-X 17.0 WIN.WAA20F1 1 1200 11500 REMINGTON 209P "HI-SKOR" 800-X 17.0 REM. RXP20 1 1185 10800

WINCHESTER 209 "HI-SKOR" 800-X 15.5 WIN . WAA20F1 1 1150 11500 WINCHESTER 209 "HI-SKOR" 800-X 16.0 REM. RXP20 1 1160 11600

WINCHESTER 209 SR4756 17. 0 WIN. WAA20F1 1 1105 11100 WINCHESTER 209 SR4756 17. 0 REM. RXP20 1 1100 10700

NOTE - ALL DATA SHOWN IS FOR LEAD SHOT. DO NOT ATTEMPT TO LOAD WITH STEEL SHOT AS DANGEROUS LOADS MAY RESULT.

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

.410 BORE FIELD RELOADING DATA

PRIMER IMR POWDER WAD COLUMN SHOT VELOCITY PRESSURE

MFR. NO. DESIGNATION GRAINS MFR. DESIGNATION (OZ.) (FT/SEC) (PSI)

SHELL: REMINGTON 3" SP "EXPRESS"

REMINGTON 209PSTS IMR4198 26.5 REM. SP410 1/2 1455 11100 FEDERAL 209A IMR4227 19 .0 REM. SP410 11/16 1175 13300 REMINGTON 209P IMR4227 19 .0 REM. SP410 11/16 1115 10900 WINCHESTER 209 IMR4227 1 9. 0 REM. SP410 11/16 1120 11600

SHELL: WINCHESTER 3" COMPRESSION-FORMED "SUPER-X"

WINCHESTER 209 `IMR4198 22.0 WIN. WAA41 1/2 1260 9100 FEDERAL 209A IMR4227 16 . 5 WIN. WAA41 5 /8 1055 10700 WINCHESTER 209 IMR4227 1 6 .5 WIN. WAA41 5 /8 1015 9200

NOTE - ALL DATA SHOWN IS FOR LEAD SHOT. DO NOT ATTEMPT TO LOAD WITH STEEL SHOT AS DANGEROUS LOADS MAY RESULT.

LEAD MUZZLE CHAMBER

ABBREVIATIONS AND MANUFACTURERS’ TRADEMARKS

FEDERAL

Shotgun Shells: Hi-Power*, Gold Medal*, Paper Champion*.

Abbreviations Used Trade Names

FC Fiber Cushion Wad SC Shot Cup

*Registered trademarks of Federal Cartridge Co., Minneapolis, MN

REMINGTON*

Shotgun Shells: “Express,” “RXP,” “PREMIER.”

*Registered trademarks of Remington Arms Co., Maddison, NC

WINCHESTER*

Shotgun Shells: Double A*, Super-X*, Upland*.

*Registered trademarks of Olin Corp., East Alton, IL

BALLISTIC PRODUCTS, INC.

20015 75 Ave. No. Corcoran, MN 55340

Abbreviations Used Trade Names

BP Ballistic Products

BPGS Ballistic Products

Gas Seal Wad

BPSB Ballistic Products

Shot Buffer Material

DANGER! Smokeless powder is an extremely flammable solid and can be dangerous if improperly handled. It should not be exposed to heat, sparks, or open flame. In accordance with good handloading practices, all reloading components including smokeless pwoder should be kept out of reach of children at all times.

REFERENCE TABLES

POWDER TABLE

GRAINS LOADS GRAINS LOADS GRAINS LOADS

PER LOAD PER PO0UND PER LOAD PER POUND PER LOAD PER POUND

12 583 23 304 34 205 13 538 24 291 35 200 14 500 25 280 36 194 15 466 26 269 37 189 16 437 27 259 38 184 17 411 28 250 39 179 18 388 29 241 40 175 19 368 30 233 41 170 20 350 31 255 42 166 21 333 32 218 43 162 22 318 33 212

CHILLED SHOT TABLE

Weight Ounces 1 /2 5 /8 3/ 4 7/ 8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4 1 7/8 2 2 1/8 Weight Grains 219 273 328 383 438 492 547 602 656 711 766 820 875 930 Loads per Lb. 32 26 21 18 16 14 13 12 11 10 9988 Size Dia. In. Approximate No. of Pellets per load BB .18 25 3138445056636975818894100106

2.154455 66 77 88 99 110 121 132 143 154 165 176 187

4.136885 102 119 136 153 170 187 204 221 238 255 171 189

2.1286108 129 151 172 194 215 137 258 280 301 323 344 366

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

6.11112 139 167 195 223 251 279 307 335 362 390 418 446 474

7.10150 187 224 262 299 336 374 411 449 486 523 561 598 635 7 1/2 .095 173 216 259 302 345 388 431 474 518 564 604 647 690 733

8.085 240 300 360 420 480 540 600 660 20 780 840 900 960 1020

9.08 293 366 439 512 585 658 731 804 878 951 1024 1097 1170 1243

RIFLE

IMPORTANT: Recommended uses of IMR powder relate only to the appropriate IMR powder and not to those available from other

firms. Although the four digit numerical designations of other manufacturers’ products may be identical to those preceded by the IMR prefix, the powders are different. To avoid potential confusion, gun damage and personal injury, therefore, handloaders should be careful to note the prefix of recommended powder designations.

KEY TO ABBREVIATIONS FOR RIFLE DATA

BP Bronze Point IMR Improved Military Rifle PT D Pointed BR Bench Rest M Ma gnum RN Round Nose BT Boat Tail PL “Power-Lokt” SP Soft Point C Compressed Charge PR Primer SPCL Solf Point “Core-Lokt” C.O.L. Cartridge Overall Length PSP Pointed Soft Point HP Hollow Point PSPCL Pointed Soft Point “Core-Lokt”

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

.17 REMINGTON

REM. CASE; REM. 7 1/2 PR

REM. 25 GR. PL HP

.1722" DIA.; 24" BBL.; 2.100" C.O.L.

IMR 3031 22.5 4015 51700 IMR 4064 24.0C 4005 50700 IMR 4895 23.5 3995 51400 IMR 4350 24.5C 3470 39000 IMR 4831 25.0C 3330 33500

.22 HORNET

REM. CASE; REM. 6 1/2 PR

HORNADY 45 GR.

.224" DIA.; 25" BBL.; 1.720" C.O.L.

SR 4759 8.0C 2000 24700 IMR 4227 11.5C 2515 38900 IMR 4198 10.5C 2010 20100 IMR 3031 11.0C 1675 14100 IMR 4064 11.0C 1545 13100 IMR 4895 12.0C 1735 15500 IMR 4320 12.0C 1650 14900 IMR 4350 11.5C 1280 11700 IMR 4831 11.5C 1085 10700

.220 SWIFT

REM. CASE; REM. 9 1/2 PR

SIERRA 50 GR. SPITZER

.224" DIA.; 24" BBL.; 2.680" C.O.L.

SR 4759 25.5 3345 53000 IMR 4227 24.5 3295 52500 IMR 4198 32.0 3685 53000 IMR 3031 37.5 3845 51400 IMR 4064 39.5 3895 52500 IMR 4895 38.5 3805 52100 IMR 4320 40.0 3790 53000 IMR 4350 43.5C 3740 49100 IMR 4831 43.5C 3560 41700

.220 SWIFT

REM. CASE; REM. 9 1/2 PR

HORNADY 60 GR. SPIRE PT

.224" DIA.; 24" BBL.; 2.680" C.O.L.

SR 4759 23.5 2980 52500 IMR 4227 23.5 3000 53000 IMR 4198 28.5 3265 52200 IMR 3031 34.0 3470 52300 IMR 4064 35.5 3505 52300 IMR 4895 34.5 3470 53000 IMR 4320 36.5 3480 52800 IMR 4350 39.5 3500 53000 IMR 4831 42.5C 3555 53000

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

.222 REMINGTON

REM. CASE; REM. 7 1/2 PR

HORNANDY 45 GR.

.224" DIA.; 25" BBL.; 2.130" C.O.L.

SR 4759 16.5 2925 44000 IMR 4227 17.5 3055 44000 IMR 4198 21.5 3315 45000 IMR 3031 24.0C 3065 33100 IMR 4064 24.0C 2910 31700 IMR 4895 25.5C 3165 39500 IMR 4320 26.0C 3115 39700 IMR 4350 25.0C 2545 24700 IMR 4831 25.0C 2375 22300

.222 REMINGTON

REM. CASE; REM. 7 1/2 PR

HORNADY 50 GR. SPIRE PT . SX

.224" DIA.; 25" BBL.; 2.130" C.O.L.

SR 4759 16.5 2845 45000 IMR 4227 17.5 2965 45500 IMR 4198 20.5 3130 44500 IMR 3031 23.5C 3045 38400 IMR 4064 23.5C 2875 34200 IMR 4895 25.0C 3085 43100 IMR 4320 26.0C 3065 40800 IMR 4350 24.5C 2495 23400 IMR 4831 24.5C 2320 21500

.222 REMINGTON

REM. CASE; REM. 7 1/2 PR

REM. 55 GR. PTD. SP

.224" DIA.; 25" BBL.; 2.130" C.O.L.

SR 4759 15.5 2665 44200 IMR 4227 17.0 2835 45800 IMR 4198 20.0 2990 42600 IMR 3031 23.0C 2945 38300 IMR 4064 23.5C 2825 34100 IMR 4895 25.0C 3085 45900 IMR 4320 25.5C 2985 43500 IMR 4350 24.5C 2475 26800 IMR 4831 24.5C 2300 24100

.22-250 REMINGTON

REM. CASE; REM. 9 1/2 PR

SIERRA 50 GR. SPITZER

.224" DIA.; 24" BBL.; 2.350" C.O.L.

SR 4759 23.0 3205 52500 IMR 4227 21.5 3140 49300 IMR 4198 28.5 3565 53000 IMR 3031 35.0 3785 52700 IMR 4064 35.0 3745 52100 IMR 4895 36.0 3755 52700 IMR 4320 37.0 3700 53000 IMR 4350 40.0C 3565 47000 IMR 4831 40.0C 3390 41600

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

.22-250 REMINGTON

REM. CASE; REM. 9 1/2 PR

REM. 55 GR. PTD. SP

.224" DIA.; 24" BBL.; 2.350" C.O.L.

SR 4759 22.0 3100 53000 IMR 4227 21.5 3030 42300 IMR 4198 27.5 3375 52200 IMR 3031 34.0 3640 53000 IMR 4064 35.5 3625 52500 IMR 4895 35.5 3645 53000 IMR 4320 36.0 3540 51500 IMR 4350 39.5C 3495 47700 IMR 4831 39.5C 3320 42500

.223 REMINGTON

REM. CASE; REM. 7 1/2 PR

SIERRA 45 GR. SPITZER

.224" DIA.; 24" BBL.; 2.190" C.O.L.

SR 4759 17.5 3040 51000 IMR 4227 17.5 3085 51400 IMR 4198 22.0 3360 50300 IMR 3031 25.5C 3300 42200 IMR 4064 25.5C 3180 42500 IMR 4895 26.5C 3280 45900 IMR 4320 27.5C 3200 45100

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

6 MM REMINGTON

REM. CASE; REM. 9 1/2 PR

REM. 80 GR. PTD. SP

.243" DIA.; 22" BBL.; 2.790" C.O.L.

SR 4759 24.5 2640 50600 IMR 4227 24.5 2650 50200 IMR 4198 31.5 3015 51500 IMR 3031 39.5 3275 52000 IMR 4064 41.0 3295 52000 IMR 4895 36.5 3105 51300 IMR 4320 40.0 3180 52000 IMR 4350 46.0 3310 52000 IMR 4831 48.0 3300 51900

6 MM REMINGTON

REM. CASE; REM. 9 1/2 PR

REM. 100 GR. PTD. SPCL

.243" DIA.; 22" BBL.; 2.735" C.O.L.

SR 4759 23.5 2400 51600 IMR 4227 23.5 2395 51500 IMR 4198 29.0 2660 52000 IMR 3031 36.5 2925 52000 IMR 4064 38.0 2945 51000 IMR 4895 35.5 2880 51600 IMR 4320 37.0 2875 51300 IMR 4350 43.5 3055 52000 IMR 4831 45.5 3095 52000 IMR 7828 48.0C 3040 48000

.223 REMINGTON

REM. CASE; REM. 7 1/2 PR

SIERRA 50 GR. SPITZER

.224" DIA.; 24" BBL.; 2.260" C.O.L.

IMR 3031 25.5C 3225 45300 IMR 4064 25.5C 3150 44200 IMR 4895 26.5C 3270 48800 IMR 4320 27.5C 3200 48300

.223 REMINGTON

REM. CASE; REM. 7 1/2 PR

HORNADY 55 GR. SPIRE PT . SX

.224" DIA.; 24" BBL.; 2.260" C.O.L.

IMR 3031 25.0C 3165 50900 IMR 4064 25.5C 3090 49200 IMR 4895 26.0 3120 51100 IMR 4320 27.0C 3075 50300

Velocity and pressure readings represent average values obtained under controlled conditions. The values shown may vary substantially with the components and the reloading techniques employed. We suggest the charge weights shown be reduced initially by 10% to compensate for possible variations from the published data. The loads may then be increased as pressure indications permit.

.25-06 REMINGTON

REM. CASE; REM. 9 1/2 PR

SIERRA 120 GR. HOLLOW PT . BT

.257" DIA.; 24" BBL.; 3.100" C.O.L.

SR 4759 27.5 2315 52000 IMR 4227 28.0 2370 53000 IMR 4198 34.0 2615 51400 IMR 3031 40.5 2800 52000 IMR 4064 43.5 2885 52300 IMR 4895 40.5 2805 52600 IMR 4320 43.0 2850 51700 IMR 4350 48.5 2950 51500 IMR 4831 50.0 2945 52000 IMR 7828 55.0 3105 52800

RIFLE

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

.257 ROBERTS

REM. CASE; REM. 9 1/2 PR

SIERRA 100 GR. SPITZER

.257" DIA.; BBL.; 2.775" C.O.L.

IMR 4227 23.5 2930 44000 IMR 4064 39.5 2945 44800 IMR 4895 36.5 2850 45000 IMR 4350 44.5 2930 44600 IMR 4831 46.5 2950 44300

.257 ROBERTS

REM. CASE; REM. 9 1/2 PR

SIERRA 120 GR. HP BT

.257" DIA.; 24" BBL.; 2.775" C.O.L.

IMR 4227 22.0 2180 44400 IMR 4198 27.5 2440 45000 IMR 3031 33.0 2635 44200 IMR 4064 35.5 2695 44000 IMR 4895 33.5 2615 45000 IMR 4320 34.5 2615 44800 IMR 4350 41.5 2780 45000 IMR 4831 44.0 2810 45000 IMR 7828 47.0C 2745 43900

6.5 x 55 SWEDISH

REM. CASE; REM. 9 1/2 PR

85 GR. SIERRA H.P .

.264" DIA.; 24" BBL.; 2.800" C.O.L.

IMR 3031 43.5 3310 46000 IMR 4064 47.0 3350 45000 IMR 4895 46.0 3335 45900 IMR 4320 45.5 3260 45100 IMR 4350 51.0C 3230 43700

6.5 x 55 SWEDISH

REM. CASE; REM. 9 1/2 PR

140 GR SIERRA SPITZER B.T.,

.264" DIA.; 24" BBL.; 3.000" C.O.L.

IMR 3031 34.5 2355 45800 IMR 4064 37.5 2465 45600 IMR 4895 36.5 2430 45000 IMR 4320 37.5 2465 45500 IMR 4350 42.5 2525 45400 IMR 4831 43.5 2530 45800 IMR 7828 47.5 2600 45000

.270 WINCHESTER

REM. CASE; REM. 9 1/2 PR

REM. 100 GR. PSP

.277" DIA.; 24" BBL.; 3.075" C.O.L.

SR 4759 30.5 2720 41200 IMR 3031 48.5 3320 51300 IMR 4064 52.0 3400 50900 IMR 4895 49.0 3310 52000 IMR 4320 51.0 3340 51000 IMR 4350 57.5 3300 51500 IMR 4831 59.5C 3325 51300 IMR 7828 61.0C 3300 52000

.270 WINCHESTER

REM. CASE; REM. 9 1/2 PR

NOSLER 130 GR. PARTITION

.277" DIA.; 24" BBL.; 3.250" C.O.L.

SR 4759 27.5 2260 51300 IMR 3031 45.5 2945 51700 IMR 4064 48.0 3030 51200 IMR 4895 46.0 2945 52000 IMR 4320 45.5 2880 51400 IMR 4350 55.0 3075 51100 IMR 4831 56.5 3080 51200 IMR 7828 60.0C 3140 52000

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

.270 WINCHESTER

REM. CASE; REM. 9 1/2 PR

REM. 150 GR. SPCL

.277" DIA.; 24" BBL.; 3.250" C.O.L.

SR 4759 26.0 2045 51600 IMR 3031 42.0 2690 51800 IMR 4064 47.0 2770 51800 IMR 4895 44.0 2715 52000 IMR 4320 44.5 2700 51000 IMR 4350 53.5 2920 51800 IMR 4831 55.0 2920 51400 IMR 7828 59.0C 2985 51000

7 x 57 MM MAUSER

REM. CASE; REM. 9 1/2 PR

SPEER 130 GR. SPITZER

.284" DIA.; 24" BBL.; 2.965" C.O.L.

SR 4759 23.5 2055 46000 IMR 4227 22.5 2080 44300 IMR 4198 29.0 2365 45100 IMR 3031 38.0 2640 45500 IMR 4064 41.0 2675 44900 IMR 4895 36.5 2540 45300 IMR 4320 37.5 2540 46000 IMR 4350 47.0 2710 45500 IMR 4831 50.0C 2750 46000

7 x 57 MM MAUSER

REM. CASE; REM. 9 1/2 PR

SPEER 145 GR. SPITZER

.284" DIA.; BBL.; 3.065" C.O.L.

SR 4759 23.0 1835 45100 IMR 4227 22.5 1840 44400 IMR 4198 29.0 2260 45800 IMR 3031 38.0 2530 46000 IMR 4064 40.0 2555 45300 IMR 4895 35.0 2475 46000 IMR 4320 36.0 2365 45100 IMR 4350 47.0 2650 46000 IMR 4831 48.0C 2625 46000

7 x 57 MM MAUSER

REM. CASE; REM. 9 1/2 PR

SPEER 160 GR. SPITZER

.284" DIA.; 24" BBL.; 3.065" C.O.L.

SR 4759 22.5 1855 45700 IMR 4227 22.5 1890 46000 IMR 4198 28.5 2135 44900 IMR 3031 38.0 2430 45800 IMR 4064 40.0 2480 46000 IMR 4895 35.0 2325 45800 IMR 4320 36.0 2295 45200 IMR 4350 45.0 2510 45800 IMR 4831 47.5C 2540 45600

.280 REMINGTON

REM. CASE; REM. 9 1/2 PR

REM. 125 GR. PTD. SPCL

.283" DIA.; 24" BBL.; 3.250" C.O.L.

SR 4759 30.0 2445 49700 IMR 4227 28.5 2375 48400 IMR 4198 36.0 2680 50000 IMR 3031 47.0 2975 48900 IMR 4064 50.0 3055 49700 IMR 4895 44.0 2745 49100 IMR 4320 46.5 2880 49900 IMR 4350 56.5 3055 48600 IMR 4831 60.0C 3115 50000

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

.280 REMINGTON

REM. CASE; REM. 9 1/2 PR

REM. 150 GR. PTD. SPCL

.284" DIA.; 24" BBL.; 3.325" C.O.L.

SR 4759 29.5 2200 50000 IMR 4227 27.5 2115 49500 IMR 4198 34.5 2375 49200 IMR 3031 45.5 2745 48800 IMR 4064 48.0 2810 50000 IMR 4895 42.5 2635 49300 IMR 4320 44.5 2655 50000 IMR 4350 55.0 2895 50000 IMR 4831 57.0 2930 50000

7 MM-08 REMINGTON

REM. CASE; REM 9 1/2 PR

HORNADY 139 GR. SPIRE PT .

.284" DIA.; 24" BBL.; 2.800" C.O.L.

SR 4759 26.5 2270 51800 IMR 4227 25.5 2285 51800 IMR 4198 32.0 2565 51500 IMR 3031 40.5 2830 51900 IMR 4064 42.5 2835 51300 IMR 4895 40.5 2790 51000 IMR 4320 41.5 2800 50400 IMR 4350 46.0C 2750 44200 IMR 4831 46.0C 2645 38800

7 MM-08 REMINGTON

REM. CASE; REM. 9 1/2 PR

HORNADY 162 GR. BTHP

.284" DIA.; 24" BBL.; 2.800" C.O.L.

SR 4759 24.5 2060 51800 IMR 4227 24.0 2095 51900 IMR 4198 29.5 2330 50300 IMR 3031 38.0C 2585 51100 IMR 4064 39.0C 2535 46500 IMR 4895 38.5 2595 52000 IMR 4320 40.0 2625 51500 IMR 4350 41.5C 2440 40800 IMR 4831 41.5C 2355 35900

7 MM-08 REMINGTON

REM. CASE; REM. 9 1/2 PR

SIERRA 168 GR. MATCH KING HP

.284" DIA.; 24" BBL.; 2.800" C.O.L.

SR 4759 24.0 1995 50500 IMR 4227 23.5 2025 51400 IMR 4198 29.5 2290 51100 IMR 3031 37.0C 2515 50500 IMR 4064 38.0C 2475 46000 IMR 4895 38.0C 2535 51400 IMR 4320 40.0C 2590 51800 IMR 4350 40.0C 2365 39800 IMR 4831 40.0C 2255 34200

.284 WINCHESTER

WIN. CASE; WIN. 8 1/2-120 PR

SPEER 130 GR. SPITZER

.284" DIA.; 24" BBL.; 2.800" C.O.L.

SR 4759 30.0 2425 51900 IMR 4227 30.0 2460 52300 IMR 4198 38.0 2775 52400 IMR 3031 48.0 3055 54000 IMR 4064 50.0 3085 54000 IMR 4895 45.0 2905 52800 IMR 4320 46.0 2890 52300 IMR 4350 57.0 3130 53600 IMR 4831 59.0C 3100 50600

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

.284 WINCHESTER

WIN. CASE; WIN. 8 1/2-120 PR

SPEER 160 GR. SPITZER

.284" DIA.; 24" BBL.; 2.800" C.O.L.

SR 4759 27.5 2105 53500 IMR 4227 28.0 2170 52200 IMR 4198 34.5 2440 52500 IMR 3031 45.0 2660 52700 IMR 4064 47.0 2760 53700 IMR 4895 41.0 2584 53500 IMR 4320 43.5 2635 53900 IMR 4350 52.0C 2720 47700 IMR 4831 52.0C 2635 43800

7 MM REMINGTON MAG.

REM. CASE; REM. 9 1/2 M PR

HORNADY 120 GR. SPIRE PT .

.284" DIA.; 24" BBL.; 3.290" C.O.L.

SR 4759 36.5 2695 51900 IMR 4227 37.0 2705 51300 IMR 4198 44.0 2980 51000 IMR 3031 52.5 3180 51200 IMR 4064 55.5 3245 51200 IMR 4895 54.5 3215 52000 IMR 4320 55.5 3185 51400 IMR 4350 65.0 3300 51400 IMR 4831 68.5 3335 51400

7 MM REMINGTON MAG.

REM. CASE; REM.. M 9 1/2 PR

REM. 175 GR. PTD. SPCL

.284" DIA.; 24" BBL.; 3.290" C.O.L.

SR 4759 34.0 2220 51200 IMR 4227 35.5 2240 51800 IMR 4198 41.5 2440 52000 IMR 3031 47.5 2555 50700 IMR 4064 51.0 2645 51500 IMR 4895 50.0 2645 52000 IMR 4320 50.5 2665 52000 IMR 4350 59.5 2765 51800 IMR 4831 63.0 2790 52000 IMR 7828 66.0 2910 52000

.30 M1 CARBINE

REM. CASE; REM. 6 1/2 PR

HORNADY 100 GR. SHORT JACKET

.3085 DIA.; 18" BBL.; 1.760" C.O.L.

SR 4759 11.0C 1575 23700 IMR 4227 16.0C 2005 40000 IMR 4198 14.5C 1530 20700

.30 M1 CARBINE

REM. CASE; REM. 6 1/2 PR

HORNADY 110 GR. RN

.308" DIA.; 18" BBL.; 1.680" C.O.L.

SR 4759 11.0C 1545 26100 IMR 4227 15.0C 1900 40000 IMR 4198 14.5C 1495 20900

.300 SAVAGE

REM. CASE; REM. 9 1/2 PR

SPEER 150 GR. SPITZER

.308" DIA.; 24" BBL.; 2.600" C.O.L.

SR 4759 23.5 2095 45500 IMR 4227 24.0 2105 44800 IMR 4198 30.0 2365 44100 IMR 3031 38.5 2575 44500 IMR 4064 40.0 2565 45400 IMR 4895 40.0 2470 45900 IMR 4320 41.5 2555 46000 IMR 4350 44.0C 2415 39800 IMR 4831 44.0C 2260 36200

RIFLE

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

.300 SAVAGE

REM. CASE; REM. 9 1/2 PR

SPEER 180 GR. RN

.308" DIA.; 24" BBL.; 2.600" C.O.L.

SR 4759 22.5 1910 45500 IMR 4227 23.0 1965 44800 IMR 4198 29.5 2190 45200 IMR 3031 37.0 2390 45900 IMR 4064 38.5 2395 45900 IMR 4895 38.5 2390 45700 IMR 4320 40.0 2390 46000 IMR 4350 44.0C 2350 41900 IMR 4831 44.0C 2240 39300

.308 WINCHESTER

REM. CASE; REM. 9 1/2 PR

HORNADY 110 GR. SPIRE PT .

.308" DIA.; 23" BBL.; 2.600: C.O.L.

SR 4759 31.0 2710 51600 IMR 4227 32.0 2835 51900 IMR 4198 38.5 3015 51100 IMR 3031 45.0C 2990 42200 IMR 4064 47.0C 2955 43300 IMR 4895 49.0C 3130 49200 IMR 4320 49.0C 3010 49200 IMR 4350 47.0C 2500 32000 IMR 4831 47.0C 2330 29200

.308 WINCHESTER

REM. CASE; REM. 9 1/2 PR

REM. 180 GR. PTD. SPCL

.308" DIA.; 23" BBL.; 2.725" C.O.L.

SR 4759 26.5 2085 51200 IMR 4227 27.0 2110 52000 IMR 4198 33.5 2350 51600 IMR 3031 41.5C 2550 51700 IMR 4064 43.5C 2580 51700 IMR 4895 42.5C 2540 50900 IMR 4320 44.5C 2550 52000 IMR 4350 46.0C 2365 38900 IMR 4831 46.0C 2225 36900

.30-40 KRAG

WIN. CASE; WIN. 8 1/2-120 PR

SPEER 150 GR. SPITZER

.308" DIA.; 25.5" BBL.; 3.00" C.O.L.

SR 4759 24.5 2080 37300 IMR 4227 23.5 2090 37700 IMR 4198 30.0 2355 38100 IMR 3031 42.0 2695 39500 IMR 4064 44.0 2695 39000 IMR 4895 36.0 2435 39700 IMR 4320 37.0 2420 39700 IMR 4350 48.5C 2615 36300 IMR 4831 48.5C 2430 29800

.30-40 KRAG

WIN. CASE; WIN. 8 1/2-120 PR

REM. 180 GR. SPCL

.308" DIA.; 25.5" BBL.; 3.00" C.O.L.

SR 4759 24.0 1940 39100 IMR 4227 23.0 1900 37800 IMR 4198 29.5 2150 39800 IMR 3031 38.0 2375 39300 IMR 4064 41.0 2435 39000 IMR 4895 35.5 2270 38800 IMR 4320 35.5 2210 38100 IMR 4350 46.0C 2445 38700 IMR 4831 49.0C 2425 3590

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

.30-06

REM. CASE; REM. 9 1/2 PR

HORNADY 110 GR. SPIRE PT.

.308" DIA.; 23" BBL.; 3.130" C.O.L.

SR 4759 35.0 2820 49700 IMR 4227 32.0 2730 49400 IMR 4198 39.5 2980 49400 IMR 3031 56.0 3365 49300 IMR 4064 58.0C 3320 49400 IMR 4895 54.5 3265 49300 IMR 4320 57.5 3255 49100 IMR 4350 59.0C 2960 36900 IMR 4831 59.0C 2780 32500

.30-06

REM. CASE; REM. 9 1/2 PR

REM. 150 GR. PTD. SPCL

.308" DIA.; 23" BBL.; 3.200" C.O.L.

SR 4759 31.0 2365 49700 IMR 4227 30.0 2310 50000 IMR 4198 38.0 2600 50000 IMR 3031 49.5 2850 49800 IMR 4064 52.0 2885 50000 IMR 4895 49.5 2845 50000 IMR 4320 51.0 2825 50000 IMR 4350 59.0C 2825 47800 IMR 4831 59.0C 2715 42900

.30-06

REM. CASE; REM. 9 1/2 PR

SIERRA 200 GR. MATCH KING HP

.308" DIA.; 23" BBL.; 3.340" C.O.L.

SR 4759 28.5 2000 49800 IMR 4227 28.5 2045 50000 IMR 4198 36.0 2285 48400 IMR 3031 44.5 2450 49700 IMR 4895 43.0 2445 49700 IMR 4320 46.0 2445 48800 IMR 7828 55.0C 2385 44100

.30-06

REM. CASE; REM 9 1/2 PR

HORNADY 220 GR. RN

.308" DIA.; 23" BBL.; 3.185" C.O.L.

SR 4759 27.0 1835 50000 IMR 4227 27.0 1850 50000 IMR 4198 33.0 2055 48800 IMR 3031 42.5 2300 49000 IMR 4064 46.0 2370 50000 IMR 4895 40.5 2230 50000 IMR 4320 44.0 2295 49500 IMR 4350 53.5C 2470 50000 IMR 7828 55.0C 2285 41900

.300 H & H MAG.

REM. CASE; REM. 9 1/2 M PR

REM. 150 GR. PTD. SPCL

.308" DIA.; 24" BBL.; 3.550" C.O.L.

SR 4759 40.0 2455 53600 IMR 4227 37.0 2515 54000 IMR 4198 44.0 2715 53500 IMR 3031 60.0 3100 51000 IMR 4064 64.0 3170 53800 IMR 4895 55.0 2960 54000 IMR 4320 58.0 2970 53700 IMR 4350 73.0 3215 53600 IMR 4831 75.5C 3200 53100

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

.300 H & H MAG.

REM. CASE; REM. 9 1/2 M PR

REM. 180 GR. PTD. SPCL

.308" DIA.; 24" BBL.; 3.520" C.O.L.

SR 4759 38.0 2330 54000 IMR 4227 36.0 2300 54000 IMR 4198 43.0 2515 53000 IMR 3031 57.0 2815 53400 IMR 4064 60.0 2875 53400 IMR 4895 54.5 2760 53800 IMR 4320 57.5 2795 53800 IMR 4350 69.0 2990 54000 IMR 4831 73.0C 3035 53500

.300 H & H MAG.

REM. CASE; REM. 9 1/2 M PR

REM. 220 GR. SPCL

.308" DIA.; 24" BBL.; 3.575" C.O.L.

SR 4759 36.5 2030 54000 IMR 4227 35.5 2015 53600 IMR 4198 42.0 2240 52600 IMR 3031 52.5 2485 53300 IMR 4064 56.5 2565 53300 IMR 4895 51.5 2465 53300 IMR 4320 54.0 2495 53000 IMR 4350 65.0 2695 54000 IMR 4831 67.0 2710 54000

.300 WINCHESTER MAG.

REM. CASE; REM. 9 1/2 M PR

REM. 150 GR. PTD. SPCL

.308" DIA.; 24" BBL.; 3.340" C.O.L.

SR 4759 41.5 2660 53400 IMR 4227 39.5 2590 52400 IMR 4198 49.0 2900 53600 IMR 4064 65.5 3240 53700 IMR 4895 64.0 3240 53000 IMR 4350 76.0 3335 53900 IMR 4831 80.0 3365 54000

7.62 MM X 39

IMI CASE; CCI 200 PR

SPEER 125 GR. SP; .311 DIA.

20" BBL.; 2.180" C.O.L.

IMR 4227 18.5 1995 44100 IMR 4198 24.0 2250 42500

7.62 MM X39

IMI CASE; CCI 200 PR

REM. 150 GR. PSPCL; .308" DIA.

20" BBL.; 2.210" C.O.L.

IMR 4227 18.0 1885 44400 IMR 4198 22.5 2070 43600

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

8 x 57 MM MAUSER

WIN. CASE; WIN 8 1/2-120 PR

HORNADY 170 GR. RN

.323" DIA.; 25" BBL.; 2.840" C.O.L.

SR 4759 20.5 1855 37000 IMR 4227 21.5 1860 36600 IMR 4198 27.5 4 2075 37000 IMR 3031 32.5 2105 36100 IMR 4064 35.0 2175 36900 IMR 4895 33.5 2145 37000 IMR 4320 34.5 2105 36200 IMR 4350 42.0 2180 37000 IMR 4831 46.0 2255 37000

.338 WINCHESTER MAG.

WIN. CASE; WIN 8 1/2-120 PR

WIN. 200 GR. POWDER PT. SP

.338" DIA.; 25" BBL.; 3.330" C.O.L.

SR 4759 39.5 2335 54000 IMR 4227 38.0 2300 53500 IMR 4198 47.5 2565 53500 IMR 3031 61.0 2860 54000 IMR 4064 64.0 2920 54000 IMR 4895 61.0 2880 53700 IMR 4320 63.0 2875 54000 IMR 4350 73.0 3030 53900 IMR 4831 76.0C 3020 51000

.338 WINCHESTER MAG.

REM. CASE; REM. 9 1/2 M PR

NOSLER 250 GR. SPITZER

.338" DIA.; 24" BBL.; 3.340" C.O.L.

IMR 7828 74.0C 2565 44400

.338 WINCHESTER MAG.

REM. CASE; REM. 9 1/2 M PR

SPEER 275 GR. SPITZER

.338" DIA.; 24" BBL.; 3.340" C.O.L.

IMR 7828 71.0C 2430 43400

.338 WINCHESTER MAG.

WIN. CASE; WIN 8 1/2-120 PR

WIN. 300 GR. POWER PT. SP

.338" DIA.; 25" BBL.; 3.330" C.O.L.

SR 4759 34.5 1795 54000 IMR 4227 34.0 1800 53600 IMR 4198 42.5 2050 53500 IMR 3031 53.5 2260 53800 IMR 4064 56.0 2305 53800 IMR 4895 52.5 2265 54000 IMR 4320 54.5 2275 53700 IMR 4350 64.5 2410 53800 IMR 4831 68.5C 2480 54000

.357 MAGNUM (RIFLE)

8 X 57 MM MAUSER

WIN. CASE; WIN. 8 1/2-120 PR

SPEER 150 GR. SPITZER

.323" DIA.; 25" BBL.; 2.945" C.O.L.

SR 4759 21.5 1960 37000 IMR 4227 22.5 2015 36700 IMR 4198 28.5 2225 37000 IMR 3031 34.5 2335 37000 IMR 4064 36.0 2305 37000 IMR 4895 36.0 2310 37000 IMR 4320 36.0 2270 36900 IMR 4350 43.0 2315 36800 IMR 4831 47.0 2325 36800

REM. CASE; REM. 5 1/2 PR

HORNADY 125 GR. HP

.357" DIA.; 18.5" BBL.; 1.590" C.O.L.

“Hi-Skor”

700-X 6.7 1455 35700

PB 7.2 1435 34600 SR 7625 7.4 1460 35300 SR 4756 9.2 1615 35800

IMR 4227 20.0X 1935 34100

RIFLE

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

.357 MAGNUM (RIFLE)

REM. CASE; REM. 5 1/2 PR

HORNADY 158 GR. HP

.357" DIA.; 18.5" BBL.; 1.590" C.O.L.

“Hi-Skor”

700-X 5.7 1185 35200

PB 6.0 1160 35600 SR 7625 6.5 1215 36000 SR 4756 8.0 1340 36000

IMR 4227 16.3C 1605 34900

.35 REMINGTON

REM. CASE; REM. 9 1/2 PR

REM. 150 GR. PTD. SPCL

.358" DIA.; 23" BBL.; 2.500" C.O.L.

SR 4759 23.0 1985 35000

IMR 4227 22.0 1935 33600 IMR 4198 29.0 2190 35000 IMR 3031 42.0C 2390 34200 IMR 4064 43.0C 2390 34200 IMR 4895 43.0C 2340 34600 IMR 4320 42.5 2295 34700 IMR 4350 43.5C 1985 24100 IMR 4831 43.5C 1850 21300

.35 REMINGTON

REM. CASE; REM. 9 1/2 PR

HORNADY 200 GR. RN

.358" DIA.; 23" BBL.; 2.500" C.O.L.

SR 4759 20.5 1770 35000

IMR 4227 21.0 1760 35000 IMR 4198 27.0 1915 33500 IMR 3031 37.5 2110 34700 IMR 4064 39.5C 2080 34200 IMR 4895 36.5 2030 3490 IMR 4320 38.5 2020 35000 IMR 4350 43.0C 1915 29200 IMR 4831 43.0C 1780 25900

.358 WINCHESTER

WIN. CASE; WIN. 8 1/2-120 PR

WEST. 200 GR. SILVER TIP

.358" DIA.; 25" BBL.; 2.765" C.O.L.

SR 4759 29.5 2170 52000

IMR 4227 28.5 2130 50800 IMR 4198 40.0 2495 52000 IMR 3031 49.0C 2630 51800 IMR 4064 49.0C 2525 46200 IMR 4895 49.0C 2565 50800 IMR 4320 51.0C 3656 62800 IMR 4350 51.0C 2270 37600 IMR 4831 51.0C 2115 32300

.358 WINCHESTER

WIN. CASE; WIN. 8 1/2-120 PR

WEST. 250 GR. SILVER TIP

.358" DIA.; 25" BBL.; 2.780" C.O.L.

SR 4759 26.0 1845 51400

IMR 4227 26.5 1860 52000 IMR 4198 32.5 2045 51700 IMR 3031 42.0 2260 50800 IMR 4064 44.0C 2270 52000 IMR 4895 43.0 2235 51200 IMR 4320 44.5 2210 51400 IMR 4350 47.0C 2115 41700 IMR 4831 47.0C 1975 37100

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

.375 H & H MAG.

WIN. CASE; WIN. 8 1/2-120 PR

REM. 270 GR. SP

.375" DIA.; 25" BBL.; 3.600" C.O.L.

SR 4759 41.5 2085 53000 IMR 4227 39.5 2070 53000 IMR 4198 49.0 2300 53000 IMR 3031 65.5 2610 53000 IMR 4064 69.0 2655 52500 IMR 4895 65.0 2565 53000 IMR 4320 66.5 2545 52000 IMR 4350 78.5C 2710 53000 IMR 4831 82.5C 2690 50700

.375 H & H MAG.

WIN. CASE; WIN. 8 1/2-120 PR

WIN. 300 GR. SILVER TIP

.375" DIA.; 25" BBL.; 3.600" C.O.L.

SR 4759 39.0 1925 53000 IMR 4227 3805 1935 52600 IMR 4198 47.0 2145 53000 IMR 3031 63.0 2465 52500 IMR 4064 67.0 2525 52500 IMR 4895 61.0 2400 52800 IMR 4320 63.0 2405 53000 IMR 4350 78.0C 2620 52700 IMR 4831 80.0C 2560 48300

.416 REMINGTON MAGNUM

REM. CASE; REM. 9 1/2 M PR

SWIFT 350 GR SSSP ,

.416" DIA.; 24" BBL.; 3.545" C.O.L.

IMR 3031 76.5 2450 53000 IMR 4064 81.0 2485 51600 IMR 4895 77.0 2425 53700

.416 REMINGTON MAGNUM

REM. CASE; REM. 9 1/2 M PR

HORNADY 400 GR, FMJ,

.416" DIA.; 24" BBL.; 3.555" C.O.L.

IMR 3031 75.0 2315 52100 IMR 4064 78.0 2335 52000 IMR 4895 76.5 2325 53800

.44 REMINGTON MAG.

REM. CASE; REM. 2 1/2 PR

REM. 240 GR. SP

.430" DIA.; 22" BBL; 1.610" C.O.L.

SR 4759 21.0C 1630 38500 IMR 4227 23.5C 1680 39500 IMR 4198 25.5C 1515 26400 IMR 3031 27.0C 1190 18900 IMR 4064 27.5C 1145 16600 IMR 4895 28.0C 1225 18300 IMR 4320 28.5C 1200 20900 IMR 4350 27.0C 850 13900 IMR 4831 27.0C 720 12500

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

.444 MARLIN

REM. CASE; REM. 9 1/2 PR

REM. 240 GR. SP

.430" DIA.; 25" BBL.; 2.570" C.O.L.

SR 4759 33.0 2055 43600 IMR 4227 32.5 2030 44000 IMR 4198 47.0 2335 44000 IMR 3031 54.5C 2175 35900 IMR 4064 54.5C 2055 32200 IMR 4895 56.0C 2200 38600 IMR 4320 56.0C 2125 37500 IMR 4350 55.5C 1775 24200

.45-70 GOVT.

WIN. CASE; WIN. 8 1/2-120 PR

WIN. 405 GR. SP

.457" DIA.; 25" BBL.; 2.550" C.O.L.

SR 4759 29.0 1500 26900 IMR 4227 30.0 1465 26500 IMR 4198 38.0 1620 27400 IMR 3031 51.4 5 1795 27000 IMR 4064 55.0C 1780 26700 IMR 4895 52.5 1785 26900 IMR 4320 53.5 1720 27300 IMR 4350 56.0C 1555 20000 IMR 4831 56.0C 1390 17800

*Note - These loads must not be used

in any trapdoor single shot rifle.

.458 WINCHESTER MAG.

WIN. CASE; WIN. 8 1/2-120 PR

WIN. 510 GR. SP

.457" DIA.; 25" BBL.; 3.340" C.O.L.

SR 4759 44.5 1645 52400 IMR 4227 45.0 1665 52700 IMR 4198 58.0 1925 52500 IMR 3031 69.0C 2030 43900 IMR 4064 71.0C 2020 41300 IMR 4895 72.5 2100 53000 IMR 4320 74.0C 2070 51500 IMR 4350 72.0C 1810 30300 IMR 4831 72.0C 1680 24900

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

IMR 7828

WEATHERBY CARTRIDGES RELOADING DATA

CARTRIDGE POWD E R CHAMBER CALIBER PRIMER BULLET LENGTH (IN.) POW DE R GRAINS FT/SEC(CUP) .240 Weatherby Magnum Fed. 210 Nosler 100 gr. Spitzer 3.063 IMR-7828 53.5C 3240 52000 7mm Weatherby Magnum Fed. 215 Hornady 139 gr. Flat Spire Point 3.068 IMR-7828 76.0C 3335 51500

.300 Weatherby Magnum Fed. 215 Nosler 150 gr. Spitzer 3.560 IMR-7828 89.0C 3425 49900

.340 Weatherby Magnum Fed. 215 Nosler 210 gr. Spitzer 3.608 IMR-7828 90.5C 3070 51600

Notes:

· Brass—Weatherby Factory Shells

· C = Compressed Load

· Barrel Length—26 inch

· All Nosler bullets used were partition type

· Recommended using only primer shown for each load

Nosler 140 gr. Spitzer 3.250 IMR-7828 76.5C 3390 53300 Hornady 154 gr. Spire Point 3.337 IMR-7828 74.5 3250 53400 Nosler 160 gr. Spitzer 3.337 IMR-7828 73.5 3210 53500 Hornady 175 gr. Spire Point 3.360 IMR-7828 70.5 2975 53000

Nosler 180 gr. Spitzer 3.560 IMR-7828 86.0C 3240 52500 Nosler 200 gr. Spitzer 3.560 IMR-7828 83.0C 3065 50600

Hornady 225 gr. Spire Point 3.645 IMR-7828 89.0C 2965 51000 Hornady 250 gr. Round Nose 3.658 IMR-7828 87.5C 2860 53100

OVERALL IMR CHARGE VELOCITY PRESSURE

RIFLE DATA SHOWING CHAMBER PRESSURE IN PSI

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (psi)

243 WINCHESTER

WIN. CASE; FED. 210 PR

NOSLER 55 GR. BALLISTIC TIP

.243" DIA.; 24" BBL.; 2.580" C.O.L.

IMR 4064 44.0 3900 56000

243 WINCHESTER

WIN. CASE; FED. 210 PR

BARNES 85 GR. XBTLC

.243" DIA.; 24" BBL.; 2.670" C.O.L.

IMR 4895 38.0 3100 55600 IMR 4320 38.5 3100 57000 IMR 4350 45.0 3170 55000 IMR 4831 46.0 3170 54000

243 WINCHESTER

WIN. CASE; FED. 210 PR

HORNADY 100 GR. SP

.243" DIA.; 24" BBL.; 2.670" C.O.L.

IMR 4895 34.0 2790 56000 IMR 4350 38.2 2850 56000 IMR 4831 39.5 2880 57000

25-06 REMINGTON

REM. CASE; FED. 210 PR

BARNES 115 GR. X

.257" DIA.; 24" BBL.; 3.175" C.O.L.

IMR 4350 45.3 2860 60000 IMR 4831 46.2 2830 60000 IMR 7828 51.5 2900 57000

25-06 REMINGTON

REM. CASE; FED. 210 PR

NOSLER 115 GR. BALLISTIC TIP

.257" DIA.; 24" BBL.; 3.175" C.O.L.

IMR 4350 48.7 3000 59000 IMR 4831 50.7 3030 60000 IMR 7828 55.5 3040 57000

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (psi)

260 REMINGTON

REM. CASE; WIN. WLR PR

SIERRA 100 GR. HOLLOW PT.

.264" DIA.; 24" BBL.; 2.700" C.O.L.

IMR 3031 35.5 2995 57100 IMR 4064 39.5 3095 57000 IMR 4895 38.0 3045 57300 IMR 4320 39.0 3040 57300 IMR 4350 45.0 3120 57500 IMR 4831 46.5 3130 58300 IMR 7828 49.0C 3025 53300

260 REMINGTON

REM. CASE; WIN. WLR PR SIERRA 120 GR. SPITZER

.264" DIA.; 24" BBL.; 2.780" C.O.L.

SR 4759 17.0 1755 37500

SR 4759 23.5 2280 57600 IMR 3031 34.0 2720 57600 IMR 4064 37.0 2805 57700 IMR 4895 36.0 2770 57100 IMR 4320 37.5 2805 58400 IMR 4350 43.0 2885 58000 IMR 4831 44.0 2885 58400 IMR 7828 47.0C 2895 57800

260 REMINGTON

REM. CASE; WIN. WLR PR

HORNADY129 GR. SPIRE PT.

.264" DIA.; 24" BBL.; 2.780" C.O.L.

IMR 3031 33.0 2590 56800 IMR 4064 36.5 2690 58300 IMR 4895 36.5 2725 58100 IMR 4320 36.5 2685 58600 IMR 4350 41.5 2765 57300 IMR 4831 43.0 2785 58300 IMR 7828 45.0 2775 57200

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (psi)

260 REMINGTON

REM. CASE; WIN. WLR PR

REM. 140 GR. PSPCL

.264" DIA.; 24" BBL.; 2.780" C.O.L.

SR 4759 18.0 1735 39800

SR 4759 23.0 2135 56500 IMR 3031 32.5 2505 56200 IMR 4064 36.0 2615 56900 IMR 4895 35.5 2605 57600 IMR 4320 36.0 2600 57600 IMR 4350 43.0 2715 57000 IMR 4831 44.0 2715 57000 IMR 7828 47.0C 2755 57200

260 REMINGTON

REM. CASE; WIN. WLR PR

HORNADY 160 GR. RN

.264" DIA.; 24" BBL.; 2.800" C.O.L.

IMR 4350 40.5 2520 57400 IMR 4831 41.5 2520 57200 IMR 7828 45.0 2580 58100

270 WIN SHORT MAG

WIN. CASE; REM. 9 1/2 M

NOSLER 130 GR. BALLISTIC TIP

.277" DIA.; 24" BBL.; 2.800" C.O.L.

IMR 4350 62.5 3244 63100 IMR 4831 63.8 3234 62900 IMR 7828 68.0 3244 61500

270 WIN SHORT MAG

WIN. CASE; REM. 9 1/2 M

SWIFT 140 GR. A-FRAME

.277" DIA.; 24" BBL.; 2.800" C.O.L.

IMR 4350 58.3 3074 62700 IMR 4831 60.3 3096 62900 IMR 7828 65.2 3135 62000

270 WIN SHORT MAG

WIN. CASE; REM. 9 1/2 M

NOSLER 150 GR. BALLISTIC TIP

.277" DIA.; 24" BBL.; 2.800" C.O.L.

IMR 4350 60.0 3016 62600 IMR 4831 61.6 3021 62900 IMR 7828 66.5c 3059 60800

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (psi)

270 WINCHESTER

REM. CASE; FED. 210 PR

SIERRA 140 GR. HPBT

.277" DIA.; 24" BBL.; 3.252" C.O.L.

IMR 4831 55.0 2980 62000 IMR 7828 56.5 2860 55000

7MM REM SAUM

REM. CASE; REM. 9 1/2 M

NOSLER 140 GR. PARTITION

.284" DIA.; 24" BBL.; 2.815" C.O.L.

IMR 4350 61.2 3174 62000 IMR 4831 62.3 3173 62700 IMR 7828 65.0c 3104 58600

7MM REM SAUM

REM. CASE; REM. 9 1/2 M

BARNES 140 GR. XBT

.284" DIA.; 24" BBL.; 2.815" C.O.L.

IMR 4350 59.2 3115 63100 IMR 4831 60.6 3099 62300 IMR 7828 63.5c 3035 58700

7MM REM SAUM

REM. CASE; REM. 9 1/2 M SWIFT 150 GR. SCIROCCO

.284" DIA.; 24" BBL.; 2.815" C.O.L.

IMR 4350 57.8 3023 63000 IMR 4831 59.3 3022 63200 IMR 7828 63.5c 3028 61700

7MM REM SAUM

REM. CASE; REM. 9 1/2 M

HORNADY 154 GR. SP

.284" DIA.; 24" BBL.; 2.815" C.O.L.

IMR 4350 57.3 2964 62400 IMR 4831 58.7 2963 62200 IMR 7828 63.4 3016 63400

7MM REM SAUM

REM. CASE; REM. 9 1/2 M

NOSLER 160 GR. PARTITION

.284" DIA.; 24" BBL.; 2.815" C.O.L.

IMR 4350 56.9 2929 63000 IMR 4831 58.6 2928 62400 IMR 7828 63.3 2996 63600

RIFLE

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (psi)

7MM WIN SHORT MAG

WIN. CASE; REM. 9 1/2 M

BARNES 140 GR. XBT

.284" DIA.; 24" BBL.; 2.830" C.O.L.

IMR 4350 63.2 3155 63200 IMR 4831 64.3 3130 63000 IMR 7828 68.0c 3104 59600

7MM WIN SHORT MAG

WIN. CASE; REM. 9 1/2 M

NOSLER 150 GR. BALLISTIC TIP

.284" DIA.; 24" BBL.; 2.830" C.O.L.

IMR 4350 62.0 3072 62800 IMR 4831 63.5 3068 63000 IMR 7828 68.0c 3089 61900

7MM WIN SHORT MAG

WIN. CASE; REM. 9 1/2 M

NOSLER 160 GR. PARTITION

.284" DIA.; 24" BBL.; 2.830" C.O.L.

IMR 4350 58.3 2925 62800 IMR 4831 59.3 2922 62700 IMR 7828 65.5 3004 62900

7MM WIN SHORT MAG

WIN. CASE; REM. 9 1/2 M

HORNADY 175 GR. SP

.284" DIA.; 24" BBL.; 2.830" C.O.L.

IMR 4350 56.5 2760 62800 IMR 4831 57.0 2753 63400 IMR 7828 62.1 2811 62600

7MM REMINGTON MAG

REM. CASE; FED. 215 PR

BARNES 140 GR. XBTLC

.284" DIA.; 24" BBL.; 3.270" C.O.L.

IMR 4350 65.3 3060 58000 IMR 4831 66.5 3040 56000 IMR 7828 72.3c 3100 58000

7MM REMINGTON MAG

REM. CASE; FED. 215 PR

NOSLER 150 GR. BALLISTIC TIP

.284" DIA.; 24" BBL.; 3.290" C.O.L.

IMR 4350 60.6 2940 56000 IMR 4831 63.2 2960 57000 IMR 7828 68.2 3000 57000

7MM REMINGTON MAG

REM. CASE; FED. 215 PR

SWIFT 150 GR. SCIROCCO

.284" DIA.; 24" BBL.; 3.270" C.O.L.

IMR 4350 58.8 2930 56000 IMR 4831 62.0 2940 57000 IMR 7828 67.1 2980 56000

7MM REMINGTON MAG

REM. CASE; FED. 215 PR

NOSLER 160 GR. PARTITION

.284" DIA.; 24" BBL.; 3.290" C.O.L.

IMR 4350 58.7 2880 57000 IMR 4831 60.2 2860 56000 IMR 7828 66.0 2940 57000

7MM REMINGTON MAG

REM. CASE; FED. 215 PR SWIFT 160 GR. A-FRAME

.284" DIA.; 24" BBL.; 3.250" C.O.L.

IMR 7828 66.5 2940 59000

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (psi)

7 MM SHOOTING TIMES

WESTERNER

REM. CASE; FED. 215 PR

BARNES 120 GR. XFB

.284" DIA.; 24" BBL.; 3.580" C.O.L.

IMR 4350 73.0 3460 63000 IMR 4831 74.0 3445 63400 IMR 7828 80.0 3495 62900

7 MM SHOOTING TIMES

WESTERNER

REM. CASE; FED. 215 PR

NOSLER 140 GR. BALLISTIC TIP

.284" DIA.; 24" BBL.; 3.580" C.O.L.

IMR 4350 71.5 3285 62700 IMR 4831 74.0 3285 62500 IMR 7828 79.5 3335 62100

7 MM SHOOTING TIMES

WESTERNER

REM. CASE; FED. 215 PR

NOSLER 150 GR. BALLISTIC TIP

.284" DIA.; 24" BBL.; 3.580" C.O.L.

IMR 4350 67.5 3110 62300 IMR 4831 69.5 3110 61700 IMR 7828 77.0 3190 61600

7 MM SHOOTING TIMES

WESTERNER

REM. CASE; FED. 215 PR SWIFT 160 GR. A-FRAME

.284" DIA.; 24" BBL.; 3.600" C.O.L.

IMR 4350 66.5 2995 62000 IMR 4831 68.5 3010 62400 IMR 7828 76.0 3110 62300

7MM REM ULTRA MAG

REM. CASE; FED. 215 PR

NOSLER 140 GR. PARTITION

.284" DIA.; 24" BBL.; 3.600" C.O.L.

IMR 4831 80.2 3270 62000 IMR 7828 88.6 3350 62000

7MM REM ULTRA MAG

REM. CASE; FED. 215 PR

BARNES 140 GR. XBT

.284" DIA.; 24" BBL.; 3.600" C.O.L.

IMR 4831 79.3 3220 62000 IMR 7828 86.8 3290 62000

7MM REM UL TRA MAG

REM. CASE; FED. 215 PR

BARNES 140 GR. XLC

.284" DIA.; 24" BBL.; 3.600" C.O.L.

IMR 4831 81.2 3230 62000 IMR 7828 88.6 3300 61000

7MM REM ULTRA MAG

REM. CASE; FED. 215 PR

SWIFT 150 GR. SCIROCCO

.284" DIA.; 24" BBL.; 3.600" C.O.L.

IMR 4831 76.8 3150 62000 IMR 7828 86.0 3230 61000

7MM REM UL TRA MAG

REM. CASE; FED. 215 PR

NOSLER 160 GR. PARTITION

.284" DIA.; 24" BBL.; 3.600" C.O.L.

IMR 4831 76.5 3050 61000 IMR 7828 84.5 3140 62000

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (psi)

7MM REM ULTRA MAG

REM. CASE; FED. 215 PR

HORNADY 175 GR. SP

.284" DIA.; 24" BBL.; 3.600" C.O.L.

IMR 4831 73.3 2870 61000 IMR 7828 80.5 2950 61000

30-30 WINCHESTER

REM. CASE; REM. 9˚ PR

SIERRA 150 GR. FN

.308" DIA.; 24" BBL.; 2.550" C.O.L.

IMR 4198 24.6 2190 40000 IMR 3031 31.1 2300 39000 IMR 4064 33.7 2300 40000 IMR 4895 33.3 2310 40000 IMR 4320 33.0 2250 38000

30-30 WINCHESTER

REM. CASE; REM. 9˚ PR

HORNADAY 170 GR. FP

.308" DIA.; 24" BBL.; 2.545" C.O.L.

IMR 4198 23.6 2020 40000 IMR 3031 29.7 2110 39000 IMR 4064 31.6 2120 40000 IMR 4895 31.5 2130 40000 IMR 4320 32.0 2090 39000

308 WINCHESTER

REM. CASE; FED. 210 PR

NOSLER 150 GR. BALLISTIC TIP

.308" DIA.; 24" BBL.; 2.755" C.O.L.

IMR 3031 42.5 2750 57000 IMR 4064 45.0c 2840 58000 IMR 4895 45.5 2880 59000 IMR 4320 45.8 2830 59000

308 WINCHESTER

REM. CASE; FED. 210 PR

BARNES 165 GR. X

.308" DIA.; 24" BBL.; 2.800" C.O.L.

IMR 4064 42.5 2600 58000 IMR 4895 43.7 2650 59000 IMR 4320 43.0 2600 58000

308 WINCHESTER

REM. CASE; FED. 210 PR

NOSLER 165 GR. BALLISTIC TIP

.308" DIA.; 24" BBL.; 2.755" C.O.L.

IMR 4064 43.0c 2640 57000

308 WINCHESTER

REM. CASE; FED. 210 PR

SIERRA 165 GR. HPBT

.308" DIA.; 24" BBL.; 2.755" C.O.L.

IMR 4064 42.5 2640 57000 IMR 4895 43.3 2680 59000

30-06 SPRG

REM. CASE; FED. 210 PR

NOSLER 150 GR. BALLISTIC TIP

.308" DIA.; 24" BBL.; 3.300" C.O.L.

IMR 4064 51.3 2940 57000 IMR 4895 49.0 2880 57000 IMR 4350 59.0c 2960 57000

30-06 SPRG

REM. CASE; FED. 210 PR

NOSLER 165 GR. BALLISTIC TIP

.308" DIA.; 24" BBL.; 3.335" C.O.L.

IMR 4064 48.7 2750 57000 IMR 4895 47.0 2710 57000 IMR 4350 57.2 2840 57000 IMR 4831 56.0 2760 56000

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (psi)

30-06 SPRG

REM. CASE; FED. 210 PR

SIERRA 165 GR. HPBT

.308" DIA.; 24" BBL.; 3.215" C.O.L.

IMR 4064 47.5 2740 57000 IMR 4895 46.0 2700 57000 IMR 4350 54.0 2760 55000 IMR 4831 57.4 2830 57000

30-06 SPRG

REM. CASE; FED. 210 PR SWIFT 165 GR. A-FRAME

.308" DIA.; 24" BBL.; 3.205" C.O.L.

IMR 4895 48.5 2710 56000 IMR 4350 56.0 2790 55000 IMR 4831 59.0c 2770 54000

30-06 SPRG

REM. CASE; FED. 210 PR

SWIFT 180 GR. SCIROCCO

.308" DIA.; 24" BBL.; 3.340" C.O.L.

IMR 4064 44.7 2460 55000 IMR 4350 53.0 2590 57000 IMR 4831 54.3c 2580 56000

30-06 SPRG

REM. CASE; FED. 210 PR

NOSLER 180 GR. PARTITION

.308" DIA.; 24" BBL.; 3.290" C.O.L.

IMR 4064 45.5 2530 56000 IMR 4350 53.5 2630 56000 IMR 4831 54.0 2600 55000

30-06 SPRG

REM. CASE; FED. 210 PR

SIERRA 180 GR. SPITZER BT

.308" DIA.; 24" BBL.; 3.325" C.O.L.

IMR 4064 46.0 2600 55000 IMR 4350 54.3 2670 55000 IMR 4831 55.8 2700 57000 IMR 4831 55.3 2670 56000

300 REM SAUM

REM. CASE; REM. 9 1/2 M

NOSLER 150 GR. BALLISTIC TIP

.308" DIA.; 24" BBL.; 2.815" C.O.L.

IMR 3031 53.5 3085 62400 IMR 4064 57.5 3148 62100 IMR 4350 65.0c 3140 60100 IMR 4831 65.0c 3050 55700

300 REM SAUM

REM. CASE; REM. 9 1/2 M

HORNADY 150 GR. SP

.308" DIA.; 24" BBL.; 2.760" C.O.L.

IMR 4064 58.1 3138 62500 IMR 4350 65.5c 3131 60500 IMR 4831 65.5c 3028 54800

300 REM SAUM

REM. CASE; REM. 9 1/2 M

SPEER 165 GR. GS-SP

.308" DIA.; 24" BBL.; 2.690" C.O.L.

IMR 4064 56.6 2989 63100 IMR 4350 64.0c 3029 62600

300 REM SAUM

REM. CASE; REM. 9 1/2 M

NOSLER 165 GR. BALLISTIC TIP

.308" DIA.; 24" BBL.; 2.815" C.O.L.

IMR 4064 56.0 2968 61800 IMR 4350 63.5c 3015 61800

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (psi)

RIFLE

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (psi)

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (psi)

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (psi)

300 REM SAUM

REM. CASE; REM. 9 1/2 M

SPEER 180 GR. GS-SP

.308" DIA.; 24" BBL.; 2.695" C.O.L.

IMR 4064 54.8 2822 62400 IMR 4350 62.7 2902 62800 IMR 4831 63.0c 2836 58500

300 REM SAUM

REM. CASE; REM. 9 1/2 M

BARNES 180 GR. XBT

.308" DIA.; 24" BBL.; 2.815" C.O.L.

IMR 4064 53.3 2807 62200 IMR 4350 60.9c 2859 63400 IMR 4831 60.9c 2763 56000

300 REM SAUM

REM. CASE; REM. 9 1/2 M

SPEER 200 GR. GS-SP

.308" DIA.; 24" BBL.; 2.695" C.O.L.

IMR 4064 52.5 2663 63100 IMR 4350 59.5c 2732 61800 IMR 4831 59.5c 2649 56300

300 WIN SHORT MAG

WIN. CASE; FED. 215 PR

NOSLER 150 GR. PARITION

.308" DIA.; 24" BBL.; 2.860" C.O.L.

IMR 4350 68.8 3240 62000 IMR 4831 70.0c 3230 62000

300 WIN SHORT MAG

WIN. CASE; FED. 215 PR

NOSLER 165 GR. PARITION

.308" DIA.; 24" BBL.; 2.860" C.O.L.

IMR 4350 65.5 3080 62000 IMR 4831 67.0 3070 62000

300 WIN SHORT MAG

WIN. CASE; FED. 215 PR

NOSLER 180 GR. BALLISTIC TIP

.308" DIA.; 24" BBL.; 2.860" C.O.L.

IMR 4350 65.0 2970 62000 IMR 4831 65.6c 2940 62000

300 WIN SHORT MAG

WIN. CASE; FED. 215 PR

SPEER 200 GR. GRAND SLAM

.308" DIA.; 24" BBL.; 2.860" C.O.L.

IMR 4350 60.0 2740 62000 IMR 4831 61.1 2722 62000

300 WINCHESTER MAG

WIN. CASE; FED. 215 PR

NOSLER 165 GR. PARITION

.308" DIA.; 24" BBL.; 3.330" C.O.L.

IMR 4350 71.5 3110 61000 IMR 4831 73.0 3100 61000 IMR 7828 79.3 3110 60000

300 WINCHESTER MAG

WIN. CASE; FED. 215 PR

SIERRA 165 GR. HPBT

.308" DIA.; 24" BBL.; 3.330" C.O.L.

IMR 4350 70.5 3080 59000 IMR 4831 73.2 3100 61000 IMR 7828 78.8 3110 60000

300 WINCHESTER MAG

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

WIN. CASE; FED. 215 PR

NOSLER 180 GR. PARTITION

.308" DIA.; 24" BBL.; 3.330" C.O.L.

IMR 4350 69.0 2970 61000 IMR 4831 71.5 2950 59000 IMR 7828 77.0c 2930 56000

300 WINCHESTER MAG

WIN. CASE; FED. 215 PR SWIFT 180 GR. A-FRAME

.308" DIA.; 24" BBL.; 3.310" C.O.L.

IMR 4350 70.0 2970 58000 IMR 4831 71.5 2950 59000 IMR 7828 77.0c 2930 56000

300 WINCHESTER MAG

WIN. CASE; FED. 215 PR

SWIFT 180 GR. SCIROCCO

.308" DIA.; 24" BBL.; 3.340" C.O.L.

IMR 4350 67.8 2930 60000 IMR 4831 69.7 2930 60000 IMR 7828 74.5 2880 56000

300 WEATHERBY

REM. CASE; FED. 215

NOSLER 165 GR. BALLISTIC TIP

.308" DIA.; 24" BBL.; 3.560" C.O.L.

IMR 4350 75.0 3142 60300 IMR 4831 76.5 3187 62300 IMR 7828 81.5 3155 61000

300 WEATHERBY

REM. CASE; FED. 215

SWIFT 165 GR. A-FRAME

.308" DIA.; 24" BBL.; 3.520" C.O.L.

IMR 4350 74.5 3139 61100 IMR 4831 78.5 3192 62400 IMR 7828 82.0 3173 62000

300 WEATHERBY

REM. CASE; FED. 215

BARNES 165 GR. XBT

.308" DIA.; 24" BBL.; 3.560" C.O.L.

IMR 4350 75.0 3127 61600 IMR 4831 77.0 3120 60600 IMR 7828 81.7 3146 61300

300 WEATHERBY

REM. CASE; FED. 215

NOSLER 180 GR. PARTITION

.308" DIA.; 24" BBL.; 3.560" C.O.L.

IMR 4350 71.5 3000 61700 IMR 4831 76.0 3036 60600 IMR 7828 80.3 3079 61400

300 WEATHERBY

REM. CASE; WIN. WLR

SPEER 200 GR. GRAND SLAM

.308" DIA.; 24" BBL.; 3.500" C.O.L.

IMR 7828 80.0 2912 60900

300 REM ULTRA MAG

REM. CASE; FED. 215 PR

BARNES 165 GR. XSP

.308" DIA.; 24" BBL.; 3.600" C.O.L.

IMR 4350 81.7 3170 61000 IMR 4831 82.5 3150 61000 IMR 7828 89.0 3200 61000

300 REM UL TRA MAG

REM. CASE; FED. 215 PR SWIFT 165 GR. A-FRAME

.308" DIA.; 24" BBL.; 3.550" C.O.L.

IMR 4350 83.0 3250 62000 IMR 4831 85.5 3240 62000 IMR 7828 91.2 3260 60000

300 REM ULTRA MAG

REM. CASE; FED. 215 PR SWIFT 180 GR. A-FRAME

.308" DIA.; 24" BBL.; 3.565" C.O.L.

IMR 4350 81.2 3120 62000 IMR 4831 82.8 3090 61000 IMR 7828 89.0 3140 61000

300 REM ULTRA MAG

REM. CASE; FED. 215 PR

SWIFT 180 GR. SCIROCCO

.308" DIA.; 24" BBL.; 3.600" C.O.L.

IMR 4350 79.0 3070 62000 IMR 4831 82.9 3060 60000 IMR 7828 88.6 3100 59000

300 REM ULTRA MAG

REM. CASE; FED. 215 PR

NOSLER 180 GR. PARTITION

.308" DIA.; 24" BBL.; 3.600" C.O.L.

IMR 4350 80.5 3110 62000 IMR 4831 81.4 3070 60000 IMR 7828 87.0 3140 61000

300 REM ULTRA MAG

REM. CASE; FED. 215 PR

NOSLER 200 GR. PARTITION

.308" DIA.; 24" BBL.; 3.600" C.O.L.

IMR 4350 78.0 2940 62000 IMR 4831 80.2 2920 61000 IMR 7828 85.8 2990 61000

303 BRITISH

WIN. CASE; REM. 9 1/2

SPEER 150 GR. SPITZER

.311" DIA.; 24" BBL.; 3.035" C.O.L.

IMR 3031 41.0 2632 46100 IMR 4064 44.7 2699 46400 IMR 4895 44.2 2689 46600

303 BRITISH

WIN. CASE; REM. 9 1/2

SIERRA 180 GR. SPITZER

.311" DIA.; 24" BBL.; 3.035" C.O.L.

IMR 3031 38.3 2341 46500 IMR 4064 41.1 2400 45700 IMR 4895 41.0 2399 46100

338 WINCHESTER MAG

WIN. CASE; FED. 215 PR

NOSLER 210 GR. PARTITION

.338" DIA.; 24" BBL.; 3.300" C.O.L.

IMR 4350 68.7 2830 60000 IMR 4831 72.0 2860 60000 IMR 7828 75.0c 2790 56000

338 WINCHESTER MAG

WIN. CASE; FED. 215 PR

NOSLER 250 GR. PARTITION

.338" DIA.; 24" BBL.; 3.325" C.O.L.

IMR 4350 65.2 2560 60000 IMR 4831 67.0 2570 61000 IMR 7828 71.0c 2590 59000

338 WINCHESTER MAG

WIN. CASE; FED. 215 PR

SWIFT 250 GR. A-FRAME

.338" DIA.; 24" BBL.; 3.300" C.O.L.

IMR 4350 65.0 2560 60000 IMR 4831 66.8 2550 60000 IMR 7828 71.5c 2590 59000

338 REM ULTRA MAG

REM. CASE; FED. 215 PR

NOSLER 200 GR. BALLISTIC TIP

.338" DIA.; 26" BBL.; 3.600" C.O.L.

IMR 4350 85.6 3150 62000 IMR 4831 88.7 3160 62000 IMR 7828 94.2 3180 62000

338 REM ULTRA MAG

REM. CASE; FED. 215 PR

NOSLER 225 GR. PARTITION

.338" DIA.; 26" BBL.; 3.595" C.O.L.

IMR 4350 81.4 2940 62000 IMR 4831 84.2 2940 61000 IMR 7828 92.0 3000 61000

338 REM ULTRA MAG

REM. CASE; FED. 215 PR SWIFT 250 GR. A-FRAME

.338" DIA.; 26" BBL.; 3.525" C.O.L.

IMR 4350 79.5 2750 61000 IMR 4831 81.8 2770 61000 IMR 7828 88.3 2820 61000

338 REM ULTRA MAG

REM. CASE; FED. 215 PR

SPEER 250 GR. GRAND SLAM

.338" DIA.; 26" BBL.; 3.580" C.O.L.

IMR 7828 87.0 2810 61000

45-70 GOVT

FED. CASE; FED. 210 PR

HORNADY 300 GR. HP

.458" DIA.; 2.540" C.O.L.

IMR 4198 41.2 1900 27000 IMR 3031 54.0 1960 28000

45-70 GOVT

FED. CASE; FED. 210 PR

NOSLER 300 GR. FN PARTITION

.458" DIA.; 2.500" C.O.L.

IMR 4198 41.2 1880 28000 IMR 3031 51.5 1890 27000

45-70 GOVT

FED. CASE; FED. 210 PR

SIERRA 300 GR. FN HP

.458" DIA.; 2.530" C.O.L.

IMR 4198 43.0 1940 26000 IMR 3031 55.2 2010 28000

*Note - These loads must not be used

in any trapdoor single shot rifle.

450 MARLIN

HORNADY CASE; FED. 210 PR

BARNES 300 GR. XFN

.458" DIA.; 24" BBL.; 2.512" C.O.L.

IMR 4198 44.2 2000 39000 IMR 3031 52.5C 1870 35000

450 MARLIN

HORNADY CASE; FED. 210 PR

NOSLER 300 GR. PARTITION

.458" DIA.; 24" BBL.; 2.505" C.O.L.

IMR 3031 57.0c 2100 35000

450 MARLIN

HORNADY CASE; FED. 210 PR

HORNADY 350 GR. FP

.458" DIA.; 24" BBL.; 2.550" C.O.L.

IMR 4198 45.0 2050 40000 IMR 3031 56.0c 2030 38000

450 MARLIN

HORNADY CASE; FED. 210 PR

BARNES 400 GR. FN

.458" DIA.; 24" BBL.; 2.512" C.O.L.

IMR 4198 40.0 1820 40000 IMR 3031 50.8c 1860 40000

HANDGUN

IMPORTANT: Recommended uses of IMR powder relate only to the appropriate IMR powder and not to those available from other firms. Although the four digit numerical designations of other manufacturers’ products may be idential to those preceded by the IMR prefix, the powders are different. To avoid potential confusion, gun damage and personal injury, therefore, handloaders should be careful to note the prefix of recommended powder designations.

Great care must be taken to insure that the correct ammunition is used in your gun.

KEY TO ABBREVIATIONS FOR HANDGUN DATA

BB Bevel Base GC Gas Check PSP Pointed Soft Point BRPR Bench Rest Primer H C Hollow Cavity RN Round Nose BT Boat Tail HP Hollo w Point SJ Semi-Jacketed C Compressed Charge J Jacketed SP Soft Point C.O.L. Cartridge Overall Length M M agnum SWC Semi-Wadcutter FMJ Full Metal Jacket M C Metal Case WC Wadcutter FP Flat Point PR Prim er

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

.22 REMINGTON JET CF MAG.

REM. CASE; REM. 6 1/2 PR

.222" DIA.; 10.0" BBL.; 1.645" C.O.L.

REM. 40 GR. (J)

“Hi-Skor”

700-X 4.7 1755 32000

PB 5.1 1690 32200 SR 7625 5.3 1745 31200 SR 4756 6.7 1925 31200

IMR 4227 13.5 2290 32900

.221 REMINGTON FIREBALL

REM. CASE; REM. 7 1/2 BR PR

REM. 45 GR. PSP; .224" DIA.;

10.75" PISTOL BBL.; 1.800" C.O.L.

“Hi-Skor”

700-X 6.5 1950 51800

PB 7.58 1990 50600 SR 7625 7.8 2010 51700 SR 4756 8.3 2105 52000

“Hi-Skor”

800-X 9.4 2370 51600

SR 4759 13.2C 2235 36200

IMR 4227 14.9 2535 50000 IMR 4198 17.7C 2575 44500 IMR 3031 17.8C 2015 26800 IMR 4064 18.0C 1905 24700 IMR 4895 18.6C 2055 28600

.221 REMINGTON FIREBALL

REM. CASE; REM. 7 1/2 BR PR

REM. 50 GR. PSP; .224" DIA.;

10.75" PISTOL BBL.; 1.825" C.O.L.

“Hi-Skor”

700-X 6.0 1775 51700

PB 7.1 1835 51800 SR 7625 7.1 1850 52000 SR 4756 7.7 1925 51200

“Hi-Skor”

800-X 9.1 2265 51700

SR 4759 12.7C 2105 38000

IMR 4227 14.7 2390 51400 IMR 4198 16.7C 2380 44000 IMR 3031 17.3C 1960 28200 IMR 4064 17.5C 1835 27500 IMR 4895 18.1C 1995 29900

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

.221 REMINGTON FIREBALL

REM. CASE; REM. 7 1/2 BR PR

REM. 55 GR. PSP; .224" DIA.;

10.75" PISTOL BBL.; 1.825" C.O.L.

“Hi-Skor”

700-X 5.8 1655 51300

PB 6.6 1700 51800 SR 7625 6.6 1710 51500 SR 4756 7.2 1790 51600

“Hi-Skor”

800-X 8.9 2135 50700

SR 4759 12.2C 2000 37700

IMR 4227 14.4 2315 51700 IMR 4198 16.4C 2315 51700 IMR 3031 16.8C 1900 28000 IMR 4064 17.0C 1740 26300 IMR 4895 17.5C 1950 28700

.221 REMINGTON FIREBALL

REM. CASE; REM. 7 1/2 BR PR

HORNADY 60 GR. HP; .224" DIA.;

10.75" PISTOL BBL.; 1.825" C.O.L.

“Hi-Skor”

700-X 5.9 1635 50800

PB 6.7 1685 51200 SR 7625 6.7 1675 51900 SR 4756 7.3 1745 50900

“Hi-Skor”

800-X 8.6 2025 52000

SR 4759 11.7C 1915 38000

IMR 4227 15.1 2315 51800 IMR 4198 15.7C 5124 37100 IMR 3031 16.1C 1770 23600 IMR 4064 16.3C 1710 22800 IMR 4895 16.8C 1845 28400

.221 REMINGTON FIREBALL

REM. CASE; REM. 7 1/2 BR PR SPEER 70 GR. SEMI SPITZER;

.224" DIA.; 10.75" PISTOL BBL.;

1.740" C.O.L.

“Hi-Skor”

700-X 5.6 1455 50700

PB 6.2 1490 51300 SR 7625 6.3 1510 51500 SR 4756 7.0 1580 51100

“Hi-Skor”

800-X 7.9 1790 52000

SR 4759 10.8C 1790 52000

IMR 4227 12.5 2015 51500 IMR 4198 14.7C 2045 43200 IMR 3031 14.7C 1685 25900 IMR 4064 15.0C 1575 24200 IMR 4895 15.5C 1725 29100

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

.357 MAGNUM

REM. CASE; REM. 5 1/2 DIA.;

HORNADY 110 GR. JHP; 357" DIA.;

6.0" REVOLVER BBL.; 1.590" C.O.L.

“Hi-Skor”

700-X 6.6 1165 35600

PB 7.6 1195 36000 SR 7625 7.9 1230 35600 SR 4756 9.5 1330 35800

“Hi-Skor”

800-X 10.9 1475 33600

IMR 4227 21.0C 1510 35600

.357 MAGNUM

REM. CASE; REM. 5 1/2 PR

REM. 125 GR. SJHP; .357" DIA.;

6.0" REVOLVER BBL.; 1.580" C.O.L.

“Hi-Skor”

700-X 6.2 1075 36000

PB 6.8 1060 35800 SR 7625 7.4 1100 35800 SR 4756 8.6 1180 35800

“Hi-Skor”

800-X 10.2 1360 35300

IMR 4227 18.5C 1325 34500

.357 MAGNUM

REM. CASE; REM. 5 1/2 PR

SPEER 140 GR. JHP; .357" DIA.;

6.0 REVOLVER BBL.; 1.590" C.O.L.

“Hi-Skor”

700-X 6.00 960 35700

PB 6.4 910 36000 SR 7625 7.0 9 55 36000 SR 4756 8.2 1025 35500

“Hi-Skor”

800-X 9.7 1230 35200

IMR 4227 17.2 1210 35700

.357 MAGNUM

REM. CASE; REM. 5 1/2 PR

SPEER 148 GR. LEAD WC; .358" DIA.;

6.0" REVOLVER BBL.; 1.420" C.O.L.

“Hi-Skor”

700-X 3.0 720 13100

“Hi-Skor”

700-X 5.1 980 34800

PB 3.3 720 12300

PB 5.7 1010 35400

“Hi-Skor”

800-X 4.5 710 13500

“Hi-Skor”

800-X 8.3 1215 35500 SR 7625 6.0 1030 35600 SR 4756 8.5 1215 35600

IMR 4227 15.0C 1185 32700

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

.357 MAGNUM

REM. CASE; REM. 5 1/2 PR

REM. 158 GR. LEAD SWC; .358" DIAL;

6.0" REVOLVER BBL.; 1.580" C.O.L.

“Hi-Skor”

700-X 5.5 980 35600

PB 5.9 985 35700 SR 7625 6.5 1020 35800 SR 4756 7.7 1110 35800

“Hi-Skor”

800-X 8.9 1215 36000

.357 MAGNUM

REM. CASE; REM. 5 1/2 PR

REM. 158 GR. SJHP; .357" DIA.;

6.0" REVOLVER BBL.; 1.580" C.O.L.

“Hi-Skor”

700-X 5.2 885 35800

PB 5.7 875 36000

IMR 7625 6. 2 855 35700

SR 4756 7.5 9 40 35700

“Hi-Skor”

800-X 8.6 1080 35400

.38 SPECIAL

REM. CASE; REM. 1 1/2 PR

REM. 95 GR. SJHP; .357" DIA.;

6.0" REVOLVER BBL.; 1.470" C.O.L.

“Hi-Skor”

700-X 4.6 1025 15600

PB 5.1 1055 15600 SR 7625 5.6 1065 15700 SR 4756 6.5 1080 15900

“Hi-Skor”

800-X 7.8 1195 15700

.38 SPECIAL

REM. CASE; REM. 1 1/2 PR

HORNADY 110 GR. HP; .357" DIA.;

6.0" REVOLVER BBL.; 1.460" C.O.L.

“Hi-Skor”

700-X 4.2 970 15400

PB 4.8 990 15200 SR 7625 5.5 1060 15400 SR 4756 6.2 1040 15600

HANDGUN

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

.38 SPECIAL

REM. CASE; REM. 1 1/2 PR

REM. 125 GR. SJHP; .357" DIA.;

6.0" REVOLVER BBL.; 1.525" C.O.L.

“Hi-Skor”

700-X 4.1 840 15600

PB 4.6 865 15500 SR 7625 5.3 935 15900 SR 4756 6.1 925 15900

“Hi-Skor”

800-X 6.9 980 15500

.38 SPECIAL

REM. CASE; REM. 1 1/2 PR

SPEER 140 GR. JHP; .357" DIA.;

6.0" REVOLVER BBL.; 1.455" C.O.L.

“Hi-Skor”

700-X 3.7 730 15900

PB 4.2 735 15700 SR 7625 4.6 480 15800 SR 4756 5.6 765 16000

“Hi-Skor”

800-X 6.0 830 15700

.38 SPECIAL

REM. CASE; REM. 1 1/2 PR

SPEER 148 GR. LEAD BBWC;

.358" DIA.; 6.0" REVOLVER BBL.;

1.295" C.O.L.

“Hi-Skor”

700-X 2.6 710 8700

“Hi-Skor”

700-X 3.5 850 16000

PB 2.8 705 8400

PB 3.8 855 15800 SR 7625 3.2 715 8200 SR 7625 4.2 845 16000

“Hi-Skor”

800-X 4.3 710 8600

“Hi-Skor”

800-X 5.5 905 15900

SR 4756 5.2 905 16000

.38 SPECIAL

REM. CASE; REM. 1 1/2 PR

REM. 148 GR. LEAD WC; .358" DIA.;

6.0" REVOLVER BBL.; 1.225" C.O.L.

“Hi-Skor”

700-X 2.4 715 8800

PB 2.7 710 7900 SR 7625 2.9 700 6900

“Hi-Skor”

800-X 4.0 705 9400

.38 SPECIAL

REM. CASE; REM. 1 1/2 PR

SIERRA 150 GR. JHC; .357" DIA.;

6.0" REVOLVER BBL.; 1.445" C.O.L.

“Hi-Skor”

700-X 3.5 755 15900

PB 4.0 765 15900 SR 7625 4.3 770 15700 SR 4756 5.4 765 16000

“Hi-Skor”

800-X 5.7 795 15600

.38 SPECIAL

REM. CASE; REM. 1 1/2 PR

HORNADY 158 GR. JFP; .357" DIA.;

6.0" REVOLVER BBL.; 1.465" C.O.L.

“Hi-Skor”

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

700-X 3.4 585 15300

PB 3.9 620 16000 SR 7625 4.3 660 15700 SR 4756 5.2 705 15300

“Hi-Skor”

800-X 5.5 695 15400

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

.38 SPECIAL

REM. CASE; REM. 1 1/2 PR

REM. 158 GR. LEAD RN; .358" DIA.;

6.0" REVOLVER BBL.; 1.520" C.O.L.

“Hi-Skor”

700-X 3.0 740 11700

“Hi-Skor”

700-X 3.6 790 15800

PB 3.4 745 11700

PB 4.0 775 15500 SR 7625 3.7 745 10000 SR 7625 4.3 790 15200

“Hi-Skor”

800-X 4.8 750 11500

“Hi-Skor”

800-X 5.7 875 16000

SR 4756 5.2 825 15800

.38 SPECIAL

REM. CASE; REM. 1 1/2 PR

REM. 158 GR. LEAD SWC; .358" DIA.;

6.0: REVOLVER BBL.; 1.550" C.O.L.

“Hi-Skor”

700-X 3.2 745 13100

“Hi-Skor”

700-X 3.5 790 15400

PB 3.6 750 12200

PB 4.0 800 15800 SR 7625 3.8 750 11000 SR 7625 4.5 790 16000

“Hi-Skor”

800-X 5.0 750 11600

“Hi-Skor”

800-X 5.9 880 16000

SR 4756 5.4 840 15900

.38 SPECIAL

REM. CASE; REM. 1 1/2 PR

REM. 200 GR. LEAD RN; .358" DIA.;

6.0" REVOLVER BBL.; 1.500" C.O.L.

“Hi-Skor”

700-X 3.0 725 15000

PB 3.4 760 15800 SR 7625 3.5 755 15800 SR 4756 4.3 740 15700

“Hi-Skor”

800-X 4.6 725 15500

10 MM AUTO

REM. CASE; REM. 2 1/2 PR

REM. 155 GR. JHP; .400" DIA.

5.0" BBL.; 1.250" C.O.L.

“Hi-Skor”

700-X 6.4 1220 34300

PB 7.2 1235 35000 SR 7625 7.8 1275 34300 SR 4756 8.5 1310 34400

“Hi-Skor”

800-X 9.8 1350 30000

10 MM AUTO

REM. CASE; REM. 2 1/2 PR

WIN. 180 GR. JHP; .400 DIA.

5.0" BBL.; 1.250" C.O.L.

“Hi-Skor”

700-X 6.0 1105 34400

PB 6.4 1105 34900 SR 7625 7.0 1140 35100 SR 4756 7.6 1155 34400

“Hi-Skor”

800-X 8.7 1210 30000

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

10 MM AUTO

REM. CASE; REM. 2 1/2 PR

HORNADY 200 GR. HP/XTP; .400 DIA.

5.0" BBL.; 1.250" C.O.L.

“Hi-Skor”

700-X 5.2 975 33000

PB 5.5 970 34300 SR 7625 6.2 1040 35700 SR 4756 6.6 1045 35800

“Hi-Skor”

800-X 7.8 1130 32500

40 S & W

WIN. CASE; WIN WSP PR

NOSLER 135 GR. HP; .400" DIA.

4.0" PISTOL BBL.; 1.125" C.O.L.

“Hi-Skor”

700-X 6.2 1210 32900

PB 7.5 1230 31000 SR 7625 7.8 1250 30200 SR 4756 9.0 1285 30000

“Hi-Skor”

800-X 10.5 1305 24000

40 S & W

WIN. CASE; WIN WSP PR

SIERRA 150 FR. JHP; .400" DIA.

4.0" PISTOL BBL.; 1.125" C.O.L.

“Hi-Skor”

700-X 5.5 1120 34000

PB 6.5 1135 33500 SR 7625 7.2 1165 32500 SR 4756 7.8 1195 32700

“Hi-Skor”

800-X 8.8 1205 25000

40 S & W

WIN. CASE; WIN WSP PR

HORNADY 180 GR. HP/XTP; .400" DIA.

4.0" PISTOL BBL.; 1.125" C.O.L.

“Hi-Skor”

700-X 4.6 970 34600

PB 5.1 975 34400 SR 7625 5.7 990 33300 SR 4756 6.0 1000 33100

“Hi-Skor”

800-X 7.2 1030 26000

40 S & W

WIN. CASE; WIN WSP PR

SPEER 200 GR. TMJ; .400" DIA.

4.0" PISTOL BBL.; 1.125" C.O.L.

“Hi-Skor”

700-X 4.3 840 33800

PB 4.5 845 33900 SR 7625 5.2 885 34100 SR 4756 5.6 905 34200

“Hi-Skor”

800-X 6.3 925 26100

.41 REMINGTON MAGNUM

REM. CASE; REM. 2 1/2 PR

SIERRA 170 GR. JHC; .410" DIA.;

10" PISTOL BBL.; 1.575" C.O.L.

“Hi-Skor”

700-X 8.4 1375 39800

.41 REMINGTON MAGNUM

REM. CASE; REM. 2 1/2 PR

REM. 210 GR. JSP; .410" DIA.;

10" PISTOL BBL.; 1.590" C.O.L.

“Hi-Skor”

700-X 7.6 1185 39000

SR 7625 9.1 1245 39700

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (psi)

.44 S & W SPECIAL

REM. CASE; REM. 2 1/2 PR

HORNADY 240 GR. LEAD SWC;

.430" DIA.; 6.5" REVOLVER BBL.;

1.470" C.O.L.

“Hi-Skor”

700-X 4.9 740 13900

PB 5.7 750 14000

SR 7625 6.2 770 13800

“Hi-Skor”

800-X 6.9 695 13900

SR 4756 7.5 760 13600

IMR 4227 14.3 790 13700

.44 S & W SPECIAL

REM. CASE; REM. 2 1/2 PR

REM. 246 GR. LEAD RN; .431" DIA.;

6.5" REVOLVER BBL.; 1.570" C.O.L.

“Hi-Skor”

700-X 4.8 740 13600

PB 5.6 745 13600

SR 7625 6.2 780 14000

“Hi-Skor”

800-X 7.2 730 13900

SR 4756 7.7 775 13800

IMR 4227 14.2 815 14000

.44 REMINGTON MAGNUM

REM. CASE; REM. 2 1/2 PR SPEER 200 GR. J MAG. HP;

.429" DIA.; 8.25" PISTOL BBL.;

1.610" C.O.L.

“Hi-Skor”

700-X 10.1 1300 40000 SR 7625 12.1 1350 39700 SR 4756 14.6 1475 39800

“Hi-Skor”

800-X 15.5 1600 39800

IMR 4227 27.0C 1520 33800

.44 REMINGTON MAGNUM

REM. CASE; REM. 2 1/2 PR

SPEER 225 GR. JHP; .429" DIA.

8.25" PISTOL BBL.; 1.585" C.O.L.

“Hi-Skor”

700-X 9.8 1235 40000 SR 7625 11.7 1260 39900

“Hi-Skor”

800-X 15.4 1525 39800

IMR 4227 23.0C 1295 30700

.44 REMINGTON MAGNUM

REM. CASE; REM. 2 1.2 PR

SIERRA 240 GR. JHC; .4295" DIA.;

8.25" PISTOL BBL.; 1.590" C.O.L.

SR 4756 13.3 1260 39800

“Hi-Skor”

800-X 14.2 1415 39600

IMR 4227 22.0C 1275 32600

.44 REMINGTON MAGNUM

REM. CASE; REM. 2 1/2 PR

REM. 240 GR. JSP; .430" DIA.;

8.25" PISTOL BBL.; 1.610" C.O.L.

SR 4756 13.6 1315 39900

“Hi-Skor”

800-X 14.3 1415 40000

IMR 4227 24.0C 1370 34900

HANDGUN

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

.44 REMINGTON

MAGNUM

REM. CASE; REM. 2 1/2 PR

REM. 240 GR. LEAD GC; .423" DIA.;

8.25" PISTOL BBL.; 1.610" C.O.L.

“Hi-Skor”

700-X 9.5 1205 39600

SR 7625 11.3 1260 39700

“Hi-Skor”

800-X 13.5 1400 39600

SR 4756 13.9 1385 39800

IMR 4227 24.0C 1420 35200

.44 REMINGTON MAGNUM

REM. CASE; REM. 2 1/2 PR

HORNADY 240 GR. LEAD SWC;

.430" DIA.; 8.25" PISTOL BBL.;

1.585" C.O.L.

“Hi-Skor”

700-X 9.5 1185 40000

SR 7625 10.7 1190 39700

“Hi-Skor”

800-X 13.4 1395 39600

IMR 4227 22.0C 1310 33300

.45 A.C.P.

REM. CASE; REM. 2 1/2 PR

REM. 185 GR. MC HP; .451" DIA.;

5.0" PISTOL BBL.; 1.210" C.O.L.

IMR 422717.7 890 14000

“Hi-Skor”

700-X 5.3 845 17500

PB 6.1 855 17900

SR 7625 6.9 890 18000

“Hi-Skor”

800-X 8.6 975 18000

SR 4756 8.7 920 17900

.45 A.C.P .

REM. CASE; REM. 2 1/2 PR REM. 185 GR MC SWC MATCH; .451" DIA.; 5.0" PISTOL BBL.;

1.150" C.O.L.

“Hi-Skor”

700-X 4.4 760 14300

“Hi-Skor”

700-X 5.5 950 17900

PB 5.1 755 13600

PB 5.9 890 17900 SR 7625 5.7 760 13100 SR 7625 6.5 895 17700

“Hi-Skor”

800-X 6.8 785 12400

“Hi-Skor”

800-X 8.2 980 17700

SR 4756 8.4 940 17900

.45 A.C.P .

REM. CASE; REM. 2 1/2 PR

SPEER 200 GR. JHP; .451" DIA.;

5.0" PISTOL BBL.; 1.170" C.O.L.

“Hi-Skor”

700-X 5.1 815 17500

PB 6.0 825 17200 SR 7625 6.4 825 17200 SR 4756 8.1 880 17700

“Hi-Skor”

800-X 8.3 840 18000

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

.45 A.C.P.

REM. CASE; REM. 2 1/2 PR

HORNADY 200 GR. LEAD SWC;

.452" DIA.; 5.0" PISTOL BBL.;

1.170" C.O.L.

“Hi-Skor”

700-X 4.4 775 12000

“Hi-Skor”

700-X 5.5 930 17700

PB 5.1 770 11900 PB 5.9 885 17900

SR 7625 5.6 770 12600

“Hi-Skor”

800-X 6.4 775 12700

“Hi-Skor”

800-X 7.9 950 18000 SR 7625 6.5 900 18000 SR 4756 7.0 765 12000 SR 4756 8.2 30 17900

.45 A.C.P.

REM. CASE; REM. 2 1/2 PR

REM. 230 GR. LEAD; .451" DIA.;

5.0" PISTOL BBL.; 1.270" C.O.L.

“Hi-Skor”

700-X 4.7 775 17700

PB 5.2 765 15500

PB 5.5 810 17900 SR 7625 5.8 775 13600 SR 7625 6.2 825 17700

“Hi-Skor”

800-X 6.2 760 13800

“Hi-Skor”

800-X 7.2 860 18000 SR 4756 6.9 770 14000 SR 4756 7.5 960 17800

.45 A.C.P .

REM. CASE; REM. 2 1/2 PR

REM. 230 GR. MC; .450" DIA.;

5.0" PISTOL BBL.; 1.260" C.O.L.

“Hi-Skor”

700-X 5.0 770 17700

PB 5.5 750 17900

SR 7625 6.0 745 17400

“Hi-Skor”

800-X 7.3 840 17800 SR 4756 7.4 795 17600

.45 COLT

REM. CASE; REM. 2 1/2 PR

REM. 250 GR. LEAD; .454" DIA.;

7.25" PISTOL BBL.; 1.600" C.O.L.

“Hi-Skor”

700-X 6.3 815 13710

PB 7.2 830 13600

SR 7625 8.7 895 13900

“Hi-Skor”

800-X 9.5 915 13700 SR 4756 10.0 885 13500

IMR 4227 17.7 890 14000

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

.357 SIG

REM. CASE; REM. 1 1/2

SPEER 125 GR. GD-HP; .355" DIA.;

5" PISTOL BBL.; 1.135" C.O.L.

“Hi-Skor”

800-X 10.0c 1438 36100

PB 6.7 1237 38700 SR-7625 7.9 1304 37100 SR-4756 9.1 1376 38900

.357 SIG

REM. CASE; REM. 1 1/2

SPEER 147 GR. GD-HP; .355" DIA.;

5" PISTOL BBL.; 1.140" C.O.L.

“Hi-Skor”

700-X 5.6 1119 38400

“Hi-Skor”

800-X 9.0 1317 38000

PB 5.0 1012 38600

.38 SUPER AUTO +P

REM. CASE; REM. 2 1/2

SPEER 124 GR. GD-HP; .355" DIA.;

5" PISTOL BBL.; 1.260" C.O.L.

“Hi-Skor”

700-X 5.3 1199 34600

“Hi-Skor”

800-X 8.0c 1314 31300

PB 5.0 1122 33900 SR-7625 6.3 1219 34300 SR-4756 7.4 1284 34900

.38 SUPER AUTO +P

REM. CASE; REM. 2 1/2

SPEER 147 GR. GD-HP; .355" DIA.;

5" PISTOL BBL.; 1.260" C.O.L.

“Hi-Skor”

700-X 4.5 1028 34400

“Hi-Skor”

800-X 6.4 1159 34600

PB 4.1 912 33500 SR-7625 5.1 1004 34000 SR-4756 5.9 1053 33600

9 MM LUGER

REM. CASE; REM. 1 1/2 PR.

REM. 115 GR. JHP; .354" DIA.;

4.0" PISTOL BBL.; 1.110" C.O.L.

SR 7625 5.1 1095 32400 SR 4756 6.3C 1175 30600

“Hi-Skor”

800-X 6.5 1150 30300

9 MM LUGER

REM. CASE; CCI 500 PR.

REM. 124 GR. MC; .354" DIA.;

4.0" PISTOL BBL.; 1.125" C.O.L.

SR 7625 4.9 1040 32300 SR 4756 6.3C 1160 32400

“Hi-Skor”

800-X 6.5C 1115 28600

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

9 MM LUGER

REM. CASE; FED. 100 PR HORNADY 147 GR. BTHP/XTP .355" DIA.; 4.0" PISTOL BBL.;

1.130" C.O.L.

SR 4756 4.4 950 32700

.25 A.C.P.

REM. CASE; CCI 500 PR

HORNADY 50 GR. FMJ; .251" DIA.;

2.0" PISTOL BBL.; .900" C.O.L.

“Hi-Skor”

700-X 1.1 740 14400

PB 1.1 740 17700 SR 7625 1.2 755 17900 SR 4756 1.4 770 16900

“Hi-Skor”

800-X 1.8 815 17800

380 A.C.P.

REM. CASE; REM. 1 1/2 PR.

HORNADY 90 GR. HP; .355" DIA.;

3.75" PISTOL BBL.; .970" C.O.L.

“Hi-Skor”

700-X 2.9 985 15900

PB 3.0 890 15700 SR 7625 3.2 880 14700 SR 4756 3.6 880 15500

“Hi-Skor”

800-X 4.1 870 15500

380 A.C.P.

REM. CASE; CCI 500 PR.

HORNADY 100 GR. FMJ; .355" DIA.;

3.75" PISTOL BBL.; .980" C.O.L.

“Hi-Skor”

700-X 2.7 840 15200

PB 2.8 835 15400 SR 7625 3.0 855 15500 SR 4756 3.5 875 15900

“Hi-Skor”

800-X 4.0 840 14700

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

HANDGUN

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

38 SPECIAL

(COWBOY ACTION)

REM. CASE; REM. 1 1/2

HORNADY 140 GR. FPCOWBOY; .127" DIA.;

8" PISTOL BBL.; 1.510" C.O.L.

“Hi-Skor”

700-X 3.0 789 11700

“Hi-Skor”

800-X 4.0 778 10300

38 SPECIAL

(COWBOY ACTION)

REM. CASE; REM. 1 1/2 REM 158 GR. SWC; .127" DIA.; 8" PISTOL BBL.; 1.510" C.O.L.

“Hi-Skor”

700-X 3.0 770 12400

“Hi-Skor”

800-X 3.8 764 11400

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

44 REM MAG

(COWBOY ACTION)

REM. CASE; REM. 2 1/2

D & J 200 GR. LRN FP; .430" DIA.;

8.25" PISTOL BBL.; 1.565" C.O.L.

“Hi-Skor”

700-X 4.3 818 11700

“Hi-Skor”

800-X 5.9 813 10500

PB 5.1 781 10700 SR-7625 5. 9 812 11100 SR-4756 7. 0 797 10700

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

45 COLT

(COWBOY ACTION)

REM. CASE; REM. 2 1/2

D & J 200 GR. LRN FP; .452" DIA.;

7.5" PISTOL BBL.; 1.585" C.O.L.

“Hi-Skor”

700-X 5.0 780 7200

“Hi-Skor”

800-X 7.3 800 6600

PB 6.3 766 7000 SR-7625 7. 3 795 8300 SR-4756 8. 5 768 6700

IMR CHARGE VELOCITY CHAMBER

POWDER (grains) (ft/sec) PRESS. (cup)

45 COLT

(COWBOY ACTION)

REM. CASE; REM. 2 1/2

D & J 250 GR. LRN FP; .452" DIA.;

7.5" PISTOL BBL.; 1.580" C.O.L.

“Hi-Skor”

700-X 5.2 772 11900

“Hi-Skor”

800-X 7.0 773 10500

PB 6.3 767 10800 SR-7625 7.0 769 10300 SR-4756 8.2 756 10200

THOMPSON/CENTER CONTENDER RELOADING DATA

(ALL DATA DEVELOPED IN T/C CONTENDER COMMERCIAL BARRELS)

KEY TO ABBREVIATIONS FOR T/C CONTENDER DATA

BR Bench Rest FMJ Full Metal Jacket PSP Pointed Soft Point BR PR Bench Rest Primer FP Flat Point SPCL Soft Point “Cole-Lokt” BT Boat Tail HP Hollow Point T/C Thompson Center C Compressed Charge J Jacketed C.O.L. Cartridge Overall Length

BULLET IMR CHARGE VELOCITY (FT/SEC) CHAMBER OVERALL

WT.DIA. POWDER(GRAINS 10" BARREL 14" BARREL PRESSURE (CUP) LENGTH (IN.)

.222 REMINGTON—REM. CASE, REM. 7 1/2 BR PR

45 GR. .224" IMR 4227 17.1 2500 - 45200 2.130"

SIERRA SPITZER IMR 4198 21.1 2640 - 45800

50 GR. .224" IMR 4227 16.1 2365 - 45800 2.130"

REMINGTON PSP IMR 4198 20.0 2510 - 45600

52 GR. .224" IMR 4227 15.8 2300 - 45600 2.190"

SIERRA HPBT BR IMR 4198 19.8 2455 - 45800

55 GR. .224" IMR 4198 19.0 2375 - 45200 2.085"

SPEER FMJ IMR 3031 21.5C 2225 - 37800

60 GR. .224" IMR 4227 14.7 2105 - 45000 2.245"

HORNADY HP IMR 4198 19.1 2330 - 45800

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

70 GR. .224" IMR 4198 17.9 2145 - 45700 2.060"

SPEER IMR 3031 20.5C 2000 - 34900

SEMI-SPITZER IMR 4895 21.5C 2050 - 37900

IMR 4895 24.2C 2380 - 37400

IMR 4895 24.2C 2365 - 39300

IMR 4895 23..8C 2325 - 40500

IMR 4895 23.0C 2275 - 41200

IMR 4895 23.0C 2235 - 42400

CARTRIDGE

THOMPSON/CENTER CONTENDER RELOADING DATA

(ALL DATA DEVELOPED IN T/C CONTENDER COMMERCIAL BARRELS)

BULLET IMR CHARGE VELOCITY (FT/SEC) CHAMBER OVERALL

WT.DIA. POWDER(GRAINS 10" BARREL 14" BARREL PRESSURE (CUP) LENGTH (IN.)

CARTRIDGE

.25/.35 WINCHESTER—REM. CASE, FED. 210 BR PR

60 GR. .257" IMR 3031 28.3 2325 - 36900 2.390"

SPEER SPIRE POINT IMR 4064 30.5C 2285 - 36000

87 GR. .257" IMR 3031 23.4 1965 - 36800 2.690"

HORNADY SPIRE POINT IMR 4064 25.7 1960 - 36500

100 GR. .257" IMR 3031 22.1 1845 - 36500 2.700"

SPEER SPITZER IMR 4064 25.2 1875 - 37000

117 GR. .257" IMR 3031 21.5 1760 - 36700 2.700"

SIERRA IMR 4895 22.2 1750 - 37000

SPITZER BT IMR 4350 28.3C 1760 - 35900

IMR 4350 31.0C 1900 - 36400

.30 HERRETT—REM. (FORMED BY T/C), CASE, FED. 210 BR PR

110 GR. .308" IMR 4227 18.8 1910 2035 44600 2.020"

HORNADY FMJ IMR 4198 24.3 2075 2210 44600

130 GR. .308" IMR 4227 18.0 1775 1885 44800 2.175"

HORNADY IMR 4198 22.5 1895 2015 44400

SPIRE POINT IMR 3031 26.0C 1765 1875 36300

150 GR. .308" IMR 4198 21.3 1760 1870 44200 2.300"

SIERRA SPITZER IMR 3031 25.2C 1680 1785 36700

170 GR. .308" IMR 4198 19.2 1575 1670 44600 2.165"

REMINGTON SPCL IMR 3031 24.5C 1590 1690 37800

IMR 3031 28.0C 1940 2070 36000

IMR 4895 27.0C 1735 1845 40700

IMR 4895 26.0C 1625 1725 41200

.30/.30 WINCHESTER—REM. CASE, FED. 210 BR PR

110 GR. .308" IMR 3031 36.0C 2110 34000 2.450"

HORNADY FMJ IMR 4895 34.6 2080 2235 37800

130 GR. .308" IMR 3031 36.0C 2025 2175 37000 2.725" HORNADY SPIRE POINT IMR 4064 36.5C 1965 2110 36500

150 GR. .308" IMR 3031 33.0 1895 2035 37500 2.855"

SIERRA SPITZER IMR 4064 34.4 1855 1995 37400

170 GR. .308" IMR 3031 27.4 1660 1780 37600 2.700"

REMINGTON SPECIAL IMR 4064 32.8 1750 1875 37900 2.700"

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

IMR 4064 36.5C 2020 2170 33200

THOMPSON/CENTER CONTENDER RELOADING DATA

(ALL DATA DEVELOPED IN T/C CONTENDER COMMERCIAL BARRELS)

BULLET IMR CHARGE VELOCITY (FT/SEC) CHAMBER OVERALL

WT.DIA. POWDER(GRAINS 10" BARREL 14" BARREL PRESSURE (CUP) LENGTH (IN.)

CARTRIDGE

.357 HERRETT—WIN. (FORMED BY T/C) CASE, FED. 210 BR PR

110 GR. .357" SR 4759 24.5C 1950 2070 35600 2.080"

HORNADY JHP IMR 4227 23.8 2095 2225 44500

125 GR. .357" SR 4759 24.0C 1880 1990 38400 2.080"

HORNADY JHP IMR 4227 22.3 1995 2070 44900

158 GR. .357" SR 4759 23.0C 1705 1810 42000 2.150"

HORNADY JFP IMR 4227 20.2 1710 1815 44900

170 GR. .357" SR 4759 23.0C 1655 1750 41400 2.230"

SIERRA FMJ IMR 4227 20.1 1640 1735 45000

SILHOUETTE IMR 4198 30.0C 1835 1940 44600

200 GR. .358" SR 4759 23.0C 1575 1675 44100 2.540"

HORNADY IMR 4198 28.2 1715 1820 45000

SPIRE POINT IMR 3031 31.0C 1540 1635 32400

IMR 4198 32.0C 2070 2200 33900

IMR 4198 31.0C 2015 2135 38100

IMR 4198 29.9C 1925 2045 44900

IMR 4895 34.0C 1605 1705 38300

.35 REMINGTON—REM. CASE, FED. 210 BR PR

158 GR. .357" IMR 3031 38.4c - 2030 34500 2.300"

HORNADY JFP IMR 3895 37.8-1975 34700

170 GR. .357" IMR 3031 38.5C - 1985 33700 2.405"

SIERRA FMJ IMR 4895 37.8-1920 34100

SILHOUETTE IMR 4064 38.1-1850 35000

250 GR. .358" IMR 3031 31.0-1620 35000 2.800"

SPEER SPITZER IMR 4064 33.0-1610 34800

IMR 4064 39.5C - 1925 32600

IMR HANDLOADING POWDER SELECTION GUIDE

The following table lists the IMR Handloading Powders and the general area of use for each powder. Whenever a specific powder appears in more than one section ofthis Guide (for example, shotshell and handgun), the same powder can be used for all recommended loads shown with this powder. Powders can be used in case bullet rifle loads as specified in reliable published loading data.

POWDER CONTAINER NET WEIGHT LBS.

DESIGNATION SHOTSHELL (GAUGE) HANDGUN RIFLE CANISTER CADDY KEG

10 12 16 20 28 410 “HI-SKOR” 700-X x x x x x 1/ 2 5 1 2 “HI-SKOR” 800-X x x x x x x 1/2 5 1 2 PB x x x x x x 1/2 5 1 2 SR 7625 x x x x x x 1 /2 5 1 2 SR 4756 x x x x x x 1 /2 5 1 2 SR 4759 x x 1 /2 5 1 2 IMR 4227 x x x 1 8 20 IMR 4198 x x x 1 8 20 IMR 3031 x x 1 8 20 IMR 4064 x x 1 8 20 IMR 4895 x x 1 8 20 IMR 4320 x x 1 8 20

Downloading, printing and use of the information on this page signifies acceptance of and compliance with all IMR Handloader's Guide cautions and safety recommendations.

IMR 4350 x x 1 8 20 IMR 4831 x 1 8 2 0 IMR 7828 x 1 8 2 0

IMR

SMOKELESS POWDER DISTRIBUTORS

Camfour, Inc.

Westfield Industrial Park

Westfield, MA 01085-1693

Phone: (413) 568-3371

Fax: (413) 568-9663

Email: sales@camfour.com

Website: http://www.camfour.com

Dole Explosives Inc.

Box 71

Rosemount, MN 55068

Phone: (651) 423-1141

Fax: (651) 322-6168

Email: dolepowder@aol.com

Hall Explosives, Inc.

RR 1, Box 148B

Hershey, PA 17033

Phone: (717) 533-6565

Fax: (717) 533-6716

Terryreigle@aol.com

W. A. Murphy, Inc.

P. O. Box 4607

El Monte, CA 91734-0607

Phone: (626) 444-9271

Fax: (626) 575-2848

Website: www.murphypowder.com

E-mail: reloadit@murphypowder.com

Western Powders, Inc.

P. O . Box 158

Miles City, MT 59301

Phone: (406) 232-0422

Fax: (406) 232-0430

Website: www.westernpowder.com

(CANADA)

Hummason Mfg. Ltd.

P. O. Box 81047

623 Trinity Road

Ancaster, Ont. L9G 4X1

Phone: (905) 648-3430

Fax: (905) 648-4616

The information presented in this booklet is based upon results obtained in our ballistics laboratory, and is offered without charge as an aid to handloaders, to be employed at their own discretion and risk. Safe loading practices should be observed at all times. Since we have no control over the circumstances of loading, we assume no liability for the results obtained, and we guarantee only that powder meets our manufacturing standards.

IMR POWDER COMPANY

PLATTSBURGH, NY 12901

Website: www.imrpowder.com

TOLL FREE 1-877-IMRDATA

05/03

FIREARMS imr reloading User Guide

Specifications and Main Features

Frequently Asked Questions

User Manual