How it Works
Finlux
Loading...
42S7010
User Manual [nl]
42 pgs4.2 Mb0

Finlux 42S7010 User Manual [nl]

42S7010
colour television
owner’s manual
Contents
Preparation ............................................................. 2
Safety Precautions ................................................. 2
Connection to a Television Distribution System
Environmental Information ..................................... 6
Repair Information .......................................... 6
Remote Control Buttons ......................................... 7
TV and Operating Buttons ...................................... 8
Viewing the Connections - Back Connectors ......... 8
Viewing the Connections - Side Connectors .......... 9
Aerial Connection ................................................... 9
Connecting the TV to a PC ....................................11
Using Other Connectors ....................................... 12
Switching On/Off ................................................... 12
Volume Setting .............................................. 13
Programme Selection (Previous or Next
Programme) .................................................. 14
Programme Selection (Direct Access) .......... 14
Viewing the Electronic Programme Guide (EPG) . 14
First Time Installation............................................ 15
Installation ............................................................ 16
Manual Tuning ..................................................... 17
Managing Stations: Channel List .......................... 17
Managing Stations: Favourites ............................. 18
Managing Stations: Sorting the Channel List ....... 19
On-Screen Information ......................................... 19
English - 1 -
Timeshift Recording ............................................. 22
Instant Recording ................................................. 22
Using the 3D Mode ............................................... 23
3D Settings ................................................... 24
Mode ............................................................. 24
2D Only ......................................................... 24
Virtual 3D ...................................................... 24
Supported 3D Content Resolutions .............. 24
Changing Image Size: Picture Formats ................ 24
Confi guring Picture Settings ................................. 25
Confi guring Sound Settings .................................. 26
Confi guring Your TV’s Settings ............................. 27
Using a Conditional Access Module (not
included) ............................................................... 28
Parental Control.................................................... 29
Adding a Timer .............................................. 30
Editing a Timer .............................................. 30
Deleting a Timer ............................................ 30
Confi guring Date/Time Settings ............................ 31
Confi guring Source Settings ................................. 31
Confi guring Other Settings ................................... 31
Other Features ..................................................... 32
Teletext ................................................................. 32
Appendix A: PC Input Typical Display Modes ....... 34
Appendix B: AV and HDMI Signal Compatibility
(Input Signal Types) .............................................. 34
Appendix C: Supported DVI Resolutions.............. 35
Appendix E: Software Upgrade ............................ 37
Appendix F: Supported 3D Content Resolutions .. 38
Specifi cations ....................................................... 39
3D Glasses ........................................................... 39
Important Instruction ............................................. 40
01_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076863_50208403.indd 1 07.02.2012 11:09:52
Features
3D Viewing: This product supports the 3D viewing • function via an available broadcast or via HDMI, PC,YPBPR source.
Remote controlled colour LED TV.•
Fully integra ted Terrestrial digital T V (DVB-T - • MPEG2).
HDMI connectors for digital video and audio. This • connection is also designed to accept high defi nition signals.
USB input.•
Programme recording•
Programme timeshifting•
1000 programmes (analogue+digital).•
On Screen Display (OSD) menu system.•
Integrated tuner DVB-T HD, MPEG2 compatible.•
Scart socket for external devices (such as video, • video games, audio set, etc.).
Stereo sound system. (Nicam)•
Teletext, fastext, TOP text.•
Headphone connection.•
Automatic programming system.•
Forward or backward manual tuning.•
Sleep timer / Child lock.•
Automatic sound mute when no transmission.•
NTSC playback.•
AVL (Automatic Volume Limiting).•
Auto power down.•
PLL (Frequency Search).•
PC input.•
Plug&Play for Windows 98, ME, 2000, XP, Vista • Windows 7.
Game Mode.•
100 Hz•
Introduction
Thank you for choosing this product. This manual will guide you through the proper operation of your TV. Before operating the TV, please read this manual thoroughly. Please keep this manual in a safe place for future reference.
This device is intended to receive and display TV programs. The different c onnection options make an additional expansion of the reception and display sources possible (receiver, DVD player, DVD recorder, VCR, PC etc.).
This device is only suitable for dry indoor use. This appliance is intended solely for private domestic use and may not be used for industrial and commercial purposes. We exclude liability in principle, if the device is not used as intended, or unauthorized modifi cations have been made. To operate your LED TV in extreme ambient conditions may cause the damage of the device.
Preparation
For ventilation, leave a free space of at least 10 cm all around the set. To prevent any fault and unsafe situation, please do not place any objects on top of the set. Use this device in moderate climates.
Safety Precautions
Read th e fol low ing r e co m m e n d e d sa f et y precautions carefully.
Power Source
The TV set should be operated only from a 220-240V AC, 50 Hz outlet. Ensure that you select the correct voltage setting for your convenience.
Power Cord
Do not place the set, a piece of furniture, etc. on the power cord or pinch the cord. Handle the power cord by the plug. Do not unplug the appliance by pulling from the power cord and never touch the power cord with wet hands as this could cause a short circuit or electric shock. Never make a knot in the cord or tie it with other cords. The power cord should be placed in such a way that they are not likely to be stepped on. A damaged power cord can cause fi re or give you an electric shock. When it is damaged and needs to be replaced, it should be done by qualifi ed personnel.
English - 2 -
01_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076863_50208403.indd 2 07.02.2012 11:09:58
Moisture and Water
Do not use this device in a humid and damp place (avoid the bathroom, the sink in the kitchen, etc). Do not expose this device to rain or water, as this may be dangerous and do not place objects fi lled with liquids, such as fl ower vases, on top.
If any solid object or liquid falls into the cabinet, unplug the TV and have it checked by qualifi ed personnel before operating it any further.
Cleaning
Before cleaning, unp lug the TV set from the wall outlet. Do not use liquid or aerosol cleaners. Use a soft and dry cloth.
Ventilation
The slots and openings on the TV set are intended for ventilation and to ensure reliable operation. To prevent overheating, these openings must not be blocked or covered in anyway.
Heat and Flames
The set should not be placed near to open fl ames or sources of intense heat such as an electric heater. Ensure that no open fl ame sources, such as candles, are placed on top of the TV. Batteries should not be exposed to excessive heat such as sunshine, fi re or the like.
Lightning
In case of storm and lightning or when going on holiday, disconnect the power cord from the wall outlet.
Replacement Parts
When replacement parts are required, make sure that the service technician has used replacement parts, which are specifi ed by the manufacturer or have the same specifi cations as the original one. Unauthorized substitutions may result in fi re, electrical shock or other hazards.
Servicing
Please refer all servicing to qualifi ed personnel. Do not remove the cover yourself as this may result in an electric shock.
Waste Disposal
Instructions for waste disposal:
• Pac kaging and pack agi ng aids are re cyc lab le and shou ld prin cip ally be recycled. Packaging materials, such as a foil bag, must be kept away from children. • Batteries, including those which are heavy metal-free, should not be disposed of with household waste. Please dispose of used
English - 3 -
batteries in an environmentally friendly manner. Find out about the legal regulations which apply in your area.
• Do not try to recharge batteries, there is a danger of explosion. Replace batteries only with the same or equivalent type. This symbol on the product or on its packaging means that your electrical device should be disposed at the end of its service life, separately from your household wastes. There are separate collection systems for recycling in the EU. For m ore information, please contact the local authority or the dealer where you purchased the product.
Disconnecting the Device
The mains plug is used to disconnect the TV set from the mains and therefore it must remain readily operable.
3D Mode and 3D Images
Re a d and un ders t and the foll owin g safe t y precautions carefully for your safety before using the 3D function.
You may ex per i enc e discomfo rt, he ada ches • or dizzi ness while watching 3D images. If you experience such symptoms, you should remove 3D glasses and stop watching 3D mode.
Take regular breaks while watching 3D images. The • length and frequency of breaks may change from person to person. You must decide what works best for you. If you experience discomforts such as eye strain or nausea while watching 3D images for a long time, remove 3D glasses, stop watching 3D mode and rest. You should consult a doctor if you believe it is necessary.
It is recomm ended tha t an adult shou ld check • on children if the children are using 3D function. If they experience symptoms such as dizziness, headaches or eye strain, you shou ld have the children stop watching 3D TV and you should have the children rest.
Do not use the 3D Glasses for other purposes such • as sunglasses or general eyeglasses.
Do not use the 3D mode or wear 3D Glasses while • you are moving around. Using the 3D mode or 3D Glasses while moving may lead to injuries due to running into objects, and falling.
Use only the supplied 3D glasses.•
If you experience screen fl ickering when watching • 3D images in poor light conditions, you should turn the lamp off or dim the light.
When using headphones, you should adjust the • volume so as to avoid exce ssive l evels, since hearing damage may result.
01_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076863_50208403.indd 3 07.02.2012 11:09:58
Caution
Please read these safety instructions carefully to ensure your personal safety and to prevent
damage.
If you experience difculty while viewing 3D images with the 3D glasses, you may have some problems with your eyesight.
• You may experience headaches or fatigue when viewing 3D images through the glasses for too long.
If you experience headaches, fatigue, or dizziness, stop watching immediately.
• Do not drop obje cts onto the product or import force to the product. This may result in electric shock or re.
• Do not use your product near a humidier or kitchen counter. This may result in electric shock or re.
• Do not disassemble, repair or modify the product or its parts. Failing to do so may result in damage to the product or a malfunction.
• The following people should not use this product:
Pregnant women, inrm persons, persons with heart issues, as well as persons that become nauseous easily. People with these conditions should not use this product.
• When watching 3D video, do not place anything nearby that can be easily broken. You may mistake a 3D im age for an actual object and move your body, causing you to break nearby objects and hurt yourself.
• Use this product for watching 3D video only. Do not use it for any other purpose.
• Do not use the 3D Glasses as sunglasses or reading glasses.
• Do not spray cleaner directly onto the surface of the product.This may result in discoloration and cracks and may cause the screen display to peel off.
• Do not let water come into contact with the product when cleaning it. Ensure that water does not enter the product. This may result in electric shock or re.
• Since the lens of the product is easily scratched, make sure to clean the product with a soft cloth. As the product may be scratched if there is any foreign material on the cloth, make sure to shake off any dust before using it.
• Do not scratch the surface of the Liquid crystal shutters with a sharp tool and do not clean it using chemicals. This may degrade the screen quality.
• Do not apply force to the liquid crystal.
• Do not drop or bend the product.
• If the receiving range is out of the specied range,
the screen may not be viewable as 3D video.
• Flickering may be generated by the 3D glasses (60 Hz) when watching the 3D screen when a magnetic uorescent lamp (50 Hz) is on.
• If you encounter this symptom, please turn off the light and continue watching.
Headphone Volume
Excessive sound pressure from earphones and headphones can cause hearing loss.
Installation
To prevent inj ury, this device must be secur el y attached to the wall in accordance with the installation instructions when mounted to the wall (if the option is available).
LCD Screen
The LCD panel is a very high technology product with about a million thin fi lm transistors, giving you fi ne picture details. Occasionally, a few non-active pixels may appear on the screen as a fi xed blue, green or red point. Please note that this does not affect the performance of your product.
Warning! Do not leave your TV in standby or operating mode when you leave your house.
The Standby / On button does not fully switch off this product. Moreover the device continues to consume power in standby mode. In order to separate the device completely from mains, the mains plug has to be pulled from the mains socket. Because of that the device should be set up in a way, that an unobstructed access to the mains socket is guaranteed, so that in case of emergency the mains plug can be pulled immediately. During periods of prolonged non-use, the TV should be disconnected from the mains power supply.
Electrical device not in the hands of children
Never let children use electrical devices unsupervised. Children cann ot alway s recogn ize any possible da nge rs. Batteri es / acc umul ato rs can be lif e threatening when swallowed. Store batteries out of the reach of children. In case of swallowing a battery, medical aid has to be sought immediately. Also keep the packaging away from children as there is danger of suffocation.
English - 4 -
01_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076863_50208403.indd 4 07.02.2012 11:09:58
Licence Notifi cation (optional)
Remote Control
1 X Video & Audio
Connection Cable
Manufactured under license from Dolby Laboratories.
TRADEMARK ACKNOWLEDGMENT
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Connection to a Television Distribution System (Cable TV etc.) from Tuner
Devices connected to the protective earthing of the building installation through the mains connection or through other apparatus with a connection to protective earthing-and to a television distribution system using a coaxial cable, may in some circumstances create a fi re hazard.
Conn ection to a cab le dis tr ibuti on syste m has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11).
Package Contents
LED TV
Batteries: 2 X AAA
Instruction Book
3D Glasses: 8x
Note: You should check the contents after opening your product. Make sure that every item is included.
If you need additional pairs of 3D Glasses, please purchase them from your dealer.
Note: The HDMI connection between PC and TV may cause radio interference in which case it is recommended to use VGA(DSUB-15) connection.
English - 5 -
01_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076863_50208403.indd 5 07.02.2012 11:09:58
Environmental Information
• This television is designed to consume less energy to save the environment.
You not only help to save the environment but you can also save money by reducing electricity bills thanks to the energy effi ciency features of this TV. To reduce energy consumption, you should take the following steps:
• You can use the Power Save Mode setting, located in the Picture Settings menu. If you set the Power Save Mode as On, the TV will switch to energy-saving mode and the luminance level of TV set will be decreased to optimum level. Note that some picture settings will be unavailable when the TV is in Power Save Mode.
• When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also reduce energy consumption.
• Note that annually, using the TV set in Power Save Mode has more power effi ciency than disconnecting the TV from the mains plug instead of keeping stand-by mode. Therefore disconnect the TV from the mains plug to save energy when you do not use. However it is highly recommended to activate Power Save Mode setting to reduce your annual power consumption.
• Please help us to save environment by following these steps.
Repair Information
Please refer all servicing to qualifi ed personnel. Only qualifi ed personnel must repair the TV. Please contact your local dealer, where you purchased this TV for further information.
English - 6 -
01_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076863_50208403.indd 6 07.02.2012 11:09:59
Remote Control Buttons
Standby1.
Pause / Timeshift recording2.
Stop (in Media Browser mode)3.
No function4.
Rapid advance (in Media Browser mode)5.
No function6.
Subtitle on-off / TXT subtitle (analogue TV 7. mode) / Subtitle (in Media Browser mode)
Blue button8.
Yellow buton9.
Numeric buttons(**)10.
Previous programme 11.
OK / Select / Hold (in TXT mode) / Channel List12.
Cursor right13.
Mute14.
Volume up / down15.
Exit / Return / Index page (in TXT mode)16.
Sleep timer 17.
3D Settings18.
Picture mode selection / Changes picture mode 19. (in Media Browser video mode)
Recordings Library20.
No function21.
Play (in Media Browser mode)22.
Programme recording23.
No function24.
Rapid reverse (in Media Browser mode)25.
Image size26.
Mono/Stereo - Dual I-II / Current Language27.
Red button 28.
Green button29.
Teletext / Mix30.
Cursor up31.
Cursor left32.
Cursor down33.
Programme Down - Page up / Programme Up - 34. Page down
AV / Source35.
Menu on/off36.
Electronic Programme Guide37.
Info / Reveal (in TXT mode)38.
Media Browser(optional)39.
No function40.
English - 7 -
01_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076863_50208403.indd 7 07.02.2012 11:09:59
TV and Operating Buttons
FRONT and REAR VIEW Control buttons VIEW Control Buttons
1. Standby/On button
2. TV/AV button
3. Programme Up/Down buttons
4. Volume Up/Down buttons
Note: Press “ ” and “ ” buttons at the same time to view main menu.
Viewing the Connections - Back Connectors
SCART 21. inputs or outputs for external devices. SCART 1 2. input or output for external devices. Connect the SCART cable between SCART socket on
TV and SCART socket on your external device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.
Component Video Inputs (YPbPr)3. are used for connecting component video. You can connect the component video and audio sockets with a device that has component output. Connect the component video cables between the COMPONENT VIDEO INPUTS on on the TV and the component video outputs of your device. While connecting, be sure that the letters on your TV, “Y”, “Pb”, “Pr” correspond with your device’s connectors.
PC/YPbPr Audio Inputs4. are used for connecting audio signals of a PC or a device that connects to the TV via YPbPr. Connect the PC audio cable between the AUDIO INPUTS on the TV and audio output of your PC to enable PC audio. Connect the audio cable between AUDIO INPUTS on the TV and audio outputs of your device to enable component audio.
S/PDIF Coaxial Out5. outputs digital audio signals of the currently watched source. Use an SPDIF coaxial cable to transfer audio signals to a device that has S/PDIF input.
English - 8 -
01_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076863_50208403.indd 8 07.02.2012 11:10:00
RF Input6. connects to an aerial antenna system.
Note: that if you use a decoder or a media recorder, you should connect the aerial cable through the device to the television with an appropriate antenna cable, as shown in the illustration in the following pages.
PC Input7. is for connecting a personal computer to the TV set. Connect the PC cable between the PC INPUT on the TV and the PC output on your PC
HDMI Inputs8. are for connecting a device that has an HDMI socket. Your LED TV is capable of displaying High Defi nition pictures from devices such as a High Defi nition Satellite Receiver or DVD Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets can accept either 720p or 1080p signals. No sound connection is needed for an HDMI to HDMI connection.
Viewing the Connections - Side Connectors
CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that 1. you subscribe to. For more information, see “Conditional Access” section.
Side USB Inputs. 2.
Note that programme recording feature is available via these USB inputs. You can connect external hard disk drives to this input.
Side HDMI Input.3. Headphone jack is used for connecting an external headphone to the system. Connect to 4.
the HEADPHONE jack to listen to the TV from headphones (optional). Side audio-video connection input is used for connecting video and audio signals 5.
of external devices. To make a video connection, you must use the supplied AV connection cable for enabling connection. First, plug singular jack of the cable to the TV’s Side AV socket. Afterwards, insert your video cable’s (not supplied) connector into the YELLOW input (located on the plural side) of the supplied AV connection cable. Colours of the connected jacks should match. To enable audio connection, you must use RED and WHITE inputs of the side AV connection cable. Afterwards, insert your device’s audio cable’s connectors into the RED and WHITE jack of the supplied side AV connection cable. Colours of the connected jacks should match.
Note: You should use audio inputs of side AV connection cable (RED & WHITE) to enable sound connection when connecting a device to your TV by using PC or COMPONENT VIDEO input.
Aerial Connection
IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.
After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the • mains. Plug the power cable to the mains socket outlet.
Aerial Connection
Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.•
English - 9 -
01_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076863_50208403.indd 9 07.02.2012 11:10:01
Using USB Inputs
USB Connection
You can connect a USB hard disk drive or USB • memory stick to your TV by using the USB inputs of the TV. This feature allows you to play fi les stored in a USB drive or record programmes.
2.5” and 3.5” inch (hdd with external power supply) • external hard disk drives are supported.
To record a programme, you should fi rst connect • a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable recording feature. Otherwise, recording feature will not be available.
IMPORTANT !
You may back u p your fi les before making any • connections to the TV set in order to avoid any possible data loss. Note that manufacturer will not be responsible for any fi le damage or dataloss.
It is possible that certain types of USB devices (e.g. • MP3 Players) or USB hard disk drives/memory sticks may not be compatible with this TV.
IMPORTANT: The T V supports only FAT32 and NTFS disk formatting. However, NTFS format is not supported for recording features. For recording, if you connect a USB disk with NTFS format, the TV will ask you to format the content. See the section, “Format Disk” in the following pages for more information on disk formatting.
Note that ALL the data stored on the USB disk will be lost and then the disk format will be converted to FAT32 in such a case.
USB Disk Connection
• Plug your USB device to the USB input of the TV.
Note: Plug or unplug your USB disk while the TV is switched off.
Note: If you are going to connect a USB hard disk drive to the TV set, USB connection cable used between the disk drive and the TV should have a USB logo and should be as short as possible.
Note: While formatting a USB hard disk that has 1TB (Tera Byte) or more fi le capacity, you can experience problems with the formatting process. In such a case, you should format the disk with your personal computer and the formatted disk type should be FAT32.
SIDE VIEW USB MEMORY
CAUTION !
Quickly plugging and unplugg ing USB devices, • is a very hazardous operation. Especially, do not repeatedly quickly plug and unplug the drive. This may cause physical damage to the USB player and especially the USB device itself.
Do not pull out USB modu le while pla yi ng or • recording a fi le.
Programme Recording
To record a programme, you should fi rst connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable recording feature.
IMPORTANT: When using a new USB hard disk drive, it is recommended that you fi rst format the disk using your TV’s “Format Disk” option.
For using recording function, you should connect a • USB disk or an external hard disk drive to the TV and connected USB disk should have at least 1 GB capacity and should have 2.0 speed compatibility. If the connected USB device does not support 2.0 speed, an error message will be displayed.
Note : Recorded p rogrammes are save d into the connected USB disk. If desired, you can store/copy recordings on a computer; however, these fi les will not be available to be played on a computer. You can play the recordings only via your TV.
For more information on recording programmes, • see sections “Instant Recording”, “Timeshifting”, “Electronic Programme Guide”, “Recordings Library” or “Recording Timers” in the following parts.
Reco r de d p r o g r a m m e s a r e s p l i t i n t o 4 G B • partitions.
Recorded programmes are stored in the following • directory of the connected USB disk: \DVR\RECS. All recordings are indicated with a number. A text (txt) fi le is created for each recording. This text fil e includes info rmation such as broadca st er, programme, and recording time.
Timeshifting may be stopped a ccording to USB • device write speed. If the USB device speed is not enough for video stream bitrate, timeshifting may be stopped and recording may fail. If HD service bitrate is greater than 13 Mbp/sec. some freeze can be seen during timeshifting on both USB disk and on external HDD.Recordings of HD programmes can occupy bigger size on the USB disk depending on the broadcast’s resolution. For this reason it is recommended to use USB hard disk drives for recording HD programmes.
Do not plug out the USB/HDD during the recording. • This may harm the connected USB/HDD.
English - 10 -
01_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076863_50208403.indd 10 07.02.2012 11:10:01
Multipartiton support is available. M aximum two • different partitions are supported. If the disk have more than two partitions, crash may occur. First partition of the usb disk is used for PVR ready features. It al so must be formatted as primary partition to be used for PVR ready features.
Some stream packets may not be recorded because • of signal problems, so sometimes video may freezes during playback.
Record, Play, Pause, Display (for PlayListDialog) • keys could not be used when teletext is ON. If a recording starts from timer when teletext is ON, teletext is automatically turned off. Also teletext usage is disabled when there is ongoing recording or playback.
Radio record is not supported.•
The TV can record programmes up to ten hours.•
Connecting the TV to a PC
For displaying your computer’s screen image on your TV, you can connect your computer to the TV set. Power off both computer and display before making any connections. Use a 15-pin D-sub display cable to connect a PC to the TV. When the connection is made, switch to PC source. See “Input selection” section. Set the resolution that suits your viewing requirements. Resolution information can be found in the appendix.
Connecting to a DVD Player
If you want to connect a DVD play er to your TV, you can use the connectors of th e TV set. DVD players may have different connectors. Please refer to your DVD player’s instruction book for additional information. Power off both the TV and the device before making any connections.
Note : Cabl es show n in the illustration are not supplied.
If your DVD player has a HDMI socket, you can • connect via HDMI. When you connect to a DVD player as illustrated below, switch to HDMI source. See, “Input Selection” section.
DV D player s can also be connected thr oug h • COMPONENT SOCKETS. Use a component video cable to connect video input. For enabling audio, use a component audio cable as illustrated below. When the connection is made, switch to YPbPr source. See, “Input selection” section.
You may also connect through the SCART 1 or • SCART 2. Use a SCART cable as shown below.
Note: These three methods of connection perform the same function but in different levels of quality. It is not necessary to connect by all three methods.
Note: If you connect a PC to the TV using HDMI connection, radio interference may occur. Therefore this type of connection is not recommended. You should use VGA connection instead.
English - 11 -
01_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076863_50208403.indd 11 07.02.2012 11:10:01
Using Side AV Connectors
You can connect a range of optional equipment to your LED TV using side connectors of the TV.
For connecting a camcorder or camera , you should • use AV socket (side). To do this, you must use the supplied audio/video connection cable. First, plug single jack of the cable to the TV’s AV IN socket (si de). Afterwards, insert your c amer a cable’s (not supplied) connectors into the plural part of the audio/video connection cable. Colours of the connected jacks should match (YELLOW for VIDEO connection, WHITE/RED for audio connection). See illustration below.
Afterwards, you should switch to • Side AV source. See the section Input selection in the following sections for more information.
To listen the TV sound from headph ones, you • should connect headphones to your TV by using the
HEADPHONE jack as illustrated above.
Using Other Connectors
You can connect a range of optional equipment to your TV. A possible connection is shown below. Note that cables shown in the illustration are not supplied.
For connecting to a device that has SPDIF support, • use an appropriate SPDIF cable to enable sound connection.
Remote Control Handset
Inserting Batteries
Remove the battery cover located on the back of • the handset by gently pulling backwards from the indicated part.
Insert two • AAA/R3 or equivalent type batteries inside. Observe the correct polarity (+/-) when inserting batteries and replace the battery cover.
Note: Remove the batteries from the remote control handset when it will not be used for a long period. Otherwise it can be damaged due to any leakage of batteries. Remote range is approximately 7m/23ft.
Switching On/Off
To Switch the TV On
Connect the power cord to the 220-240V AC, 50 Hz. •
Press STANDBY touch button. Then the standby • LED lights up.
To switch the TV on from standby mode either:•
Press the “• ” button, P+ / P- or a numeric button on the remote control.
Press the • -P/CH or P/CH+ touch button on the TV. The TV will then switch on.
Note: If you switch on your TV via PROGRAMME UP/ DOWN buttons on the remote control or on the TV set, the programme that you were watching last will be reselected.
To Switch the TV Off
Press the “• ” button on the remote control or press the “ ” touch button on the TV, so the TV will switch
to standby mode.
To power down the TV completely, unplug the • power cord from the mains socket.
Note: When the TV is switched to standby mode, standby LED can blink to indicate that features such as Standby Search, Over Air Download or Timer is active. The LED can also blink when you switch on the TV from standby mode.
English - 12 -
01_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076863_50208403.indd 12 07.02.2012 11:10:02
Loading...
+ 29 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use