Finlux 42F7010 User Manual
42F7010
colour television
owner’s manual
Contents
Features ................................................................. 2
Introduction ............................................................. 2
Preparation ............................................................. 2
Safety Precautions ................................................. 2
Package Contents .................................................. 5
Environmental Information ..................................... 6
Remote Control Buttons ......................................... 7
TV and Operating Buttons ...................................... 8
Viewing the Connections - Back Connectors ......... 8
Viewing the Connections - Side Connectors .......... 9
Aerial Connection ................................................... 9
Aerial Connection ............................................... 9
Using USB Inputs ................................................. 10
Connecting the TV to a PC ....................................11
Connecting to a DVD Player..................................11
Using Side AV Connectors ................................... 12
Using Other Connectors ....................................... 12
Remote Control Handset ...................................... 12
Inserting Batteries ............................................. 12
Switching On/Off ................................................... 12
To Switch the TV On ......................................... 12
To Switch the TV Off ......................................... 12
Digital Teletext .................................................. 13
Analogue Teletext ............................................. 13
Input Selection ...................................................... 13
Operation with the Buttons on the TV ............... 13
Operation with the Remote Control .................. 13
Viewing the Electronic Programme Guide (EPG) .... 14
Recording via EPG Screen ............................... 15
Programme Options.......................................... 15
First Time Installation............................................ 15
Installation ............................................................ 16
Auto Channel Scan Menu Operation ................ 16
Manual Tuning ..................................................... 17
Digital Manual Search....................................... 17
Analogue Manual Search ................................. 17
Analog Fine Tune.............................................. 17
Clear Service List (*) ......................................... 17
Managing Stations: Channel List .......................... 17
Operating the Channel List ............................... 18
Moving a Channel ............................................. 18
Deleting a Channel ........................................... 18
Renaming a Channel ........................................ 18
Locking a Channel ............................................ 18
Managing Stations: Favourites ............................. 18
Button Functions ............................................... 18
Managing Stations: Sorting the Channel List ....... 19
On-Screen Information ......................................... 19
Media Playback Using Media Browser ................. 19
Viewing Videos via USB .................................. 20
Viewing Photos via USB ................................... 20
Slideshow Options ............................................ 20
English - 1 -
Playing Music via USB ..................................... 21
Recordings Library............................................ 21
Media Browser Settings .................................... 22
Timeshift Recording ............................................. 22
Instant Recording ................................................. 22
Watching Recorded Programmes ....................... 23
Using the 3D Mode ............................................... 23
3D Mode ........................................................... 23
Changing Image Size: Picture Formats ................ 24
Confi guring Picture Settings ................................. 25
Operating Picture Settings Menu Items ............ 25
Picture Settings Menu Items ............................. 25
PC Picture Settings Operation .......................... 26
Confi guring Sound Settings .................................. 26
Operating Sound Settings Menu Items ............. 26
Sound Settings Menu Items.............................. 26
Confi guring Your TV’s Settings ............................. 27
Operating Settings Menu Items ........................ 27
Settings Menu Items ......................................... 27
Using a Conditional Access Module (not
included) ............................................................... 27
Viewing Conditional Access Menu (*) ............... 27
Confi guring Language Preferences ...................... 28
Language Settings ............................................ 28
Parental Control.................................................... 28
Parental Settings Menu Operation (*) ............... 29
Timers ................................................................... 29
Setting Sleep Timer .......................................... 29
Recording Confi guration ....................................... 30
Confi guring Date/Time Settings ............................ 30
Confi guring Source Settings ................................. 31
Confi guring Other Settings ................................... 31
Operation .......................................................... 31
Other Features ..................................................... 32
Teletext ................................................................. 32
Tips ....................................................................... 33
Appendix A: PC Input Typical Display Modes ....... 34
Appendix B: AV and HDMI Signal Compatibility
(Input Signal Types) .............................................. 34
Appendix C: Supported DVI Resolutions.............. 35
Appendix D: Supported File Formats for USB
Mode..................................................................... 36
Appendix E: Software Upgrade ............................ 37
Appendix F: Supported 3D Content Resolutions .. 38
Specifi cations ....................................................... 39
3D Glasses ........................................................... 39
Digital Reception (DVB-T) .................................... 39
Important Instruction ............................................. 40
01_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076864_50208406.indd 101_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076864_50208406.indd 1 26.12.2011 14:28:0526.12.2011 14:28:05
Features
3D Viewing: This product supports the 3D viewing •
function via an available broadcast or via HDMI,
PC,YPBPR source.
Remote controlled colour LED TV.•
Fully integrated Terrestrial digital TV (DVB-T - •
MPEG2).
HDMI connectors for digital video and audio. This •
connection is also designed to accept high defi nition
signals.
USB input.•
Programme recording•
Programme timeshifting•
1000 programmes (analogue+digital).•
On Screen Display (OSD) menu system.•
Integrated tuner DVB-T HD, MPEG2 compatible.•
Scart socket for external devices (such as video, •
video games, audio set, etc.).
Stereo sound system. (Nicam)•
Teletext, fastext, TOP text.•
Headphone connection.•
Automatic programming system.•
Forward or backward manual tuning.•
Sleep timer / Child lock.•
Automatic sound mute when no transmission.•
NTSC playback.•
AVL (Automatic Volume Limiting).•
Auto power down.•
PLL (Frequency Search).•
PC input.•
Plug&Play for Windows 98, ME, 2000, XP, Vista •
Windows 7.
Game Mode.•
Introduction
Thank you for choosing this product. This manual
will guide you through the proper operation of your
TV. Before operating the TV, please read this manual
thoroughly. Please keep this manual in a safe place
for future reference.
This device is intended to receive and display TV
programs. The different connection options make
an additional expansion of the reception and display
sources possible (receiver, DVD player, DVD recorder,
VCR, PC etc.).
This device is only suitable for dry indoor use. This
appliance is intended solely for private domestic use
and may not be used for industrial and commercial
purposes. We exclude liability in principle, if the device
is not used as intended, or unauthorized modifi cations
have been made. To operate your LED TV in extreme
ambient conditions may cause the damage of the
device.
Preparation
For ventilation, leave a free space of at least 10 cm
all around the set. To prevent any fault and unsafe
situation, please do not place any objects on top of
the set. Use this device in moderate climates.
10 cm
10 cm
10 cm
Safety Precautions
Read the following recommended safety
precautions carefully.
Power Source
The TV set should be operated only from a 220-240V
AC, 50 Hz outlet. Ensure that you select the correct
voltage setting for your convenience.
Power Cord
Do not place the set, a piece of furniture, etc. on the
power cord or pinch the cord. Handle the power cord
by the plug. Do not unplug the appliance by pulling from
the power cord and never touch the power cord with wet
hands as this could cause a short circuit or electric shock.
Never make a knot in the cord or tie it with other cords.
The power cord should be placed in such a way that they
are not likely to be stepped on. A damaged power cord
can cause fi re or give you an electric shock. When it is
damaged and needs to be replaced, it should be done
by qualifi ed personnel.
English - 2 -
01_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076864_50208406.indd 201_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076864_50208406.indd 2 26.12.2011 14:28:0626.12.2011 14:28:06
Moisture and Water
Do not use this device in a humid and
damp place (avoid the bathroom, the
sink in the kitchen, etc). Do not expose
this device to rain or water, as this may
be dangerous and do not place objects
fi lled with liquids, such as fl ower vases,
on top.
If any solid object or liquid falls into the cabinet, unplug
the TV and have it checked by qualifi ed personnel
before operating it any further.
Cleaning
Before cleaning, unplug the TV set
from the wall outlet. Do not use liquid
or aerosol cleaners. Use a soft and
dry cloth.
Ventilation
The slots and openings on the TV set are intended for
ventilation and to ensure reliable operation. To prevent
overheating, these openings must not be blocked or
covered in anyway.
Heat and Flames
The set should not be placed near to
open fl ames or sources of intense heat
such as an electric heater. Ensure that
no open fl ame sources, such as candles,
are placed on top of the TV. Batteries should not be
exposed to excessive heat such as sunshine, fi re or
the like.
Lightning
In case of storm and lightning or when
going on holiday, disconnect the power
cord from the wall outlet.
Replacement Parts
When replacement parts are required, make sure that
the service technician has used replacement parts,
which are specifi ed by the manufacturer or have the
same specifi cations as the original one. Unauthorized
substitutions may result in fi re, electrical shock or
other hazards.
Servicing
Please refer all servicing to qualifi ed
personnel. Do not remove the cover
yourself as this may result in an electric
shock.
Waste Disposal
Instructions for waste disposal:
• Packaging and packaging aids are
recyclable and should principally be
recycled. Packaging materials, such as a
foil bag, must be kept away from children. •
Batteries, including those which are heavy
metal-free, should not be disposed of with
household waste. Please dispose of used
English - 3 -
batteries in an environmentally friendly manner. Find
out about the legal regulations which apply in your
area.
• Do not try to recharge batteries, there is a danger
of explosion. Replace batteries only with the same
or equivalent type.
This symbol on the product or on its packaging means
that your electrical device should be disposed at the
end of its service life, separately from your household
wastes. There are separate collection systems for
recycling in the EU. For more information, please
contact the local authority or the dealer where you
purchased the product.
Disconnecting the Device
The mains plug is used to disconnect the TV set
from the mains and therefore it must remain readily
operable.
3D Mode and 3D Images
Read and understand the following safety
precautions carefully for your safety before using
the 3D function.
You may experience discomfort, headaches •
or dizziness while watching 3D images. If you
experience such symptoms, you should remove 3D
glasses and stop watching 3D mode.
Take regular breaks while watching 3D images. The •
length and frequency of breaks may change from
person to person. You must decide what works best
for you. If you experience discomforts such as eye
strain or nausea while watching 3D images for a
long time, remove 3D glasses, stop watching 3D
mode and rest. You should consult a doctor if you
believe it is necessary.
It is recommended that an adult should check •
on children if the children are using 3D function.
If they experience symptoms such as dizziness,
headaches or eye strain, you should have the
children stop watching 3D TV and you should have
the children rest.
Do not use the 3D Glasses for other purposes such •
as sunglasses or general eyeglasses.
Do not use the 3D mode or wear 3D Glasses while •
you are moving around. Using the 3D mode or 3D
Glasses while moving may lead to injuries due to
running into objects, and falling.
Use only the supplied 3D glasses.•
If you experience screen fl ickering when watching •
3D images in poor light conditions, you should turn
the lamp off or dim the light.
When using headphones, you should adjust the •
volume so as to avoid excessive levels, since
hearing damage may result.
01_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076864_50208406.indd 301_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076864_50208406.indd 3 26.12.2011 14:28:0726.12.2011 14:28:07
Caution
Please read these safety instructions carefully to
ensure your personal safety and to prevent
damage.
If you experience difficulty while viewing 3D images
with the 3D glasses, you may have some problems
with your eyesight.
• You may experience headaches or fatigue when
viewing 3D images through the glasses for too long.
If you experience headaches, fatigue, or dizziness,
stop watching immediately.
• Do not drop objects onto the product or import
force to the product. This may result in electric shock
or fire.
• Do not use your product near a humidifier or kitchen
counter. This may result in electric shock or fire.
• Do not disassemble, repair or modify the product or
its parts. Failing to do so may result in damage to the
product or a malfunction.
• The following people should not use this product:
Pregnant women, infirm persons, persons with heart
issues, as well as persons that become nauseous
easily. People with these conditions should not use
this product.
• When watching 3D video, do not place anything
nearby that can be easily broken. You may mistake
a 3D image for an actual object and move your
body, causing you to break nearby objects and hurt
yourself.
• Use this product for watching 3D video only. Do not
use it for any other purpose.
• Do not use the 3D Glasses as sunglasses or reading
glasses.
• Do not spray cleaner directly onto the surface of the
product.This may result in discoloration and cracks
and may cause the screen display to peel off.
• Do not let water come into contact with the product
when cleaning it. Ensure that water does not enter the
product. This may result in electric shock or fire.
• Since the lens of the product is easily scratched,
make sure to clean the product with a soft cloth. As
the product may be scratched if there is any foreign
material on the cloth, make sure to shake off any dust
before using it.
• Do not scratch the surface of the Liquid crystal
shutters with a sharp tool and do not clean it using
chemicals. This may degrade the screen quality.
• Do not apply force to the liquid crystal.
• Do not drop or bend the product.
• If the receiving range is out of the specified range,
the screen may not be viewable as 3D video.
• Flickering may be generated by the 3D glasses (60
Hz) when watching the 3D screen when a magnetic
fluorescent lamp (50 Hz) is on.
• If you encounter this symptom, please turn off the
light and continue watching.
Headphone Volume
Excessive sound pressure from earphones
and headphones can cause hearing loss.
Installation
To prevent injury, this device must be securely
attached to the wall in accordance with the installation
instructions when mounted to the wall (if the option
is available).
LCD Screen
The LCD panel is a very high technology product with
about a million thin fi lm transistors, giving you fi ne
picture details. Occasionally, a few non-active pixels
may appear on the screen as a fi xed blue, green or
red point. Please note that this does not affect the
performance of your product.
Warning! Do not leave your TV in standby or operating
mode when you leave your house.
The Standby / On button does not fully switch off this
product. Moreover the device continues to consume
power in standby mode. In order to separate the
device completely from mains, the mains plug has to
be pulled from the mains socket. Because of that the
device should be set up in a way, that an unobstructed
access to the mains socket is guaranteed, so that
in case of emergency the mains plug can be pulled
immediately. During periods of prolonged non-use,
the TV should be disconnected from the mains power
supply.
Electrical device not in the hands of children
Never let children use electrical devices unsupervised.
Children cannot always recognize any possible
dangers. Batteries / accumulators can be life
threatening when swallowed. Store batteries out of
the reach of children. In case of swallowing a battery,
medical aid has to be sought immediately. Also keep
the packaging away from children as there is danger
of suffocation.
English - 4 -
01_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076864_50208406.indd 401_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076864_50208406.indd 4 26.12.2011 14:28:0726.12.2011 14:28:07
Licence Notifi cation (optional)
Manufactured under license from Dolby Laboratories.
TRADEMARK ACKNOWLEDGMENT
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
Connection to a Television Distribution
System (Cable TV etc.) from Tuner
Devices connected to the protective earthing of the
building installation through the mains connection or
through other apparatus with a connection to protective
earthing-and to a television distribution system using
a coaxial cable, may in some circumstances create
a fi re hazard.
Connection to a cable distribution system has
therefore to be provided through a device providing
electrical isolation below a certain frequency range
(galvanic isolator, see EN 60728-11).
Package Contents
SCREEN LANG SUBTITLE
ZOOM ROOT
REPEAT TITLE
1
3
2
4
6
5
9
7
8
0
TEXT
SWAP
OK
P/CH
MENU SOURCE RETURN
EPG INFO SLEEP
DISPLAY PRESETS
SEARCH
MODE
Remote Control
Batteries: 2 X AAA
Instruction Book
LED TV
1 X Video & Audio
3D Glasses: 8x
Connection Cable
Note: You should check the contents after opening
your product. Make sure that every item is included.
If you need additional pairs of 3D Glasses, please
purchase them from your dealer.
Note: The HDMI connection between PC and TV
may cause radio interference in which case it is
recommended to use VGA(DSUB-15) connection.
English - 5 -
01_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076864_50208406.indd 501_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076864_50208406.indd 5 26.12.2011 14:28:0726.12.2011 14:28:07
Environmental Information
• This television is designed to consume less energy to save the environment.
You not only help to save the environment but you can also save money by reducing electricity bills thanks to the
energy effi ciency features of this TV. To reduce energy consumption, you should take the following steps:
• You can use the Power Save Mode setting, located in the Picture Settings menu. If you set the Power Save
Mode as On, the TV will switch to energy-saving mode and the luminance level of TV set will be decreased to
optimum level. Note that some picture settings will be unavailable when the TV is in Power Save Mode.
• When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also reduce
energy consumption.
• Note that annually, using the TV set in Power Save Mode has more power effi ciency than disconnecting
the TV from the mains plug instead of keeping stand-by mode. Therefore disconnect the TV from the mains
plug to save energy when you do not use. However it is highly recommended to activate Power Save Mode
setting to reduce your annual power consumption.
• Please help us to save environment by following these steps.
Repair Information
Please refer all servicing to qualifi ed personnel. Only qualifi ed personnel must repair the TV. Please contact
your local dealer, where you purchased this TV for further information.
English - 6 -
01_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076864_50208406.indd 601_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076864_50208406.indd 6 26.12.2011 14:28:0826.12.2011 14:28:08
Remote Control Buttons
Standby1.
Pause / Timeshift recording2.
Stop (in Media Browser mode)3.
No function4.
Rapid advance (in Media Browser mode)5.
No function6.
Subtitle on-off / TXT subtitle (analogue TV 7.
mode) / Subtitle (in Media Browser mode)
Blue button8.
Yellow buton9.
Numeric buttons(**)10.
Previous programme 11.
OK / Select / Hold (in TXT mode) / Channel List12.
Cursor right13.
Mute14.
Volume up / down15.
Exit / Return / Index page (in TXT mode)16.
Sleep timer 17.
3D Settings18.
Picture mode selection / Changes picture mode 19.
(in Media Browser video mode)
Recordings Library20.
No function21.
Play (in Media Browser mode)22.
Programme recording23.
No function24.
Rapid reverse (in Media Browser mode)25.
Image size26.
Mono/Stereo - Dual I-II / Current Language27.
Red button 28.
Green button29.
Teletext / Mix30.
Cursor up31.
Cursor left32.
Cursor down33.
Programme Down - Page up / Programme Up - 34.
Page down
AV / Source35.
Menu on/off36.
Electronic Programme Guide37.
Info / Reveal (in TXT mode)38.
Media Browser(optional)39.
No function40.
SCREEN LANG SUBTITLE
ZOOM ROOT
REPEAT TITLE
1
2
4
5
7
8
0
TEXT
P/CH
MENU SOURCE RETURN
EPG INFO SLEEP
SEARCH
MODE
SWAP
OK
DISPLAY PRESETS
3
6
9
English - 7 -
01_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076864_50208406.indd 701_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076864_50208406.indd 7 26.12.2011 14:28:0826.12.2011 14:28:08
TV and Operating Buttons
FRONT and REAR VIEW Control buttons VIEW Control Buttons
1. Standby/On button
2. TV/AV button
3. Programme Up/Down buttons
4. Volume Up/Down buttons
Note: Press “
” and “ ”
buttons at the same time to view
main menu.
Viewing the Connections - Back Connectors
HDMI 3
SCART 21. inputs or outputs for external devices.
SCART 1 2. input or output for external devices. Connect the SCART cable between SCART socket on
TV and SCART socket on your external device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV
mode.
Component Video Inputs (YPbPr)3. are used for connecting component video.
You can connect the component video and audio sockets with a device that has component output.
Connect the component video cables between the COMPONENT VIDEO INPUTS on on the TV and
the component video outputs of your device. While connecting, be sure that the letters on your TV, “Y”,
“Pb”, “Pr” correspond with your device’s connectors.
PC/YPbPr Audio Inputs4. are used for connecting audio signals of a PC or a device that connects to the
TV via YPbPr. Connect the PC audio cable between the AUDIO INPUTS on the TV and audio output
of your PC to enable PC audio. Connect the audio cable between AUDIO INPUTS on the TV and audio
outputs of your device to enable component audio.
S/PDIF Coaxial Out5. outputs digital audio signals of the currently watched source.
Use an SPDIF coaxial cable to transfer audio signals to a device that has S/PDIF input.
English - 8 -
01_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076864_50208406.indd 801_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076864_50208406.indd 8 26.12.2011 14:28:0926.12.2011 14:28:09
RF Input6. connects to an aerial antenna system.
Note: that if you use a decoder or a media recorder, you should connect the aerial cable through the device
to the television with an appropriate antenna cable, as shown in the illustration in the following pages.
PC Input7. is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC
HDMI Inputs8. are for connecting a device that has an HDMI socket. Your LED TV is capable of
displaying High Defi nition pictures from devices such as a High Defi nition Satellite Receiver or DVD
Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets
can accept either 720p or 1080p signals. No sound connection is needed for an HDMI to HDMI
connection.
Viewing the Connections - Side Connectors
CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that 1.
you subscribe to. For more information, see “Conditional Access” section.
Side USB Inputs. 2.
Note that programme recording feature is available via these USB inputs. You can
connect external hard disk drives to this input.
Side HDMI Input.3.
Headphone jack is used for connecting an external headphone to the system. Connect to 4.
the HEADPHONE jack to listen to the TV from headphones (optional).
Side audio-video connection input is used for connecting video and audio signals 5.
of external devices. To make a video connection, you must use the supplied AV
connection cable for enabling connection. First, plug singular jack of the cable to
the TV’s Side AV socket. Afterwards, insert your video cable’s (not supplied) connector
into the YELLOW input (located on the plural side) of the supplied AV connection cable.
Colours of the connected jacks should match.
To enable audio connection, you must use RED and WHITE inputs of the side AV
connection cable. Afterwards, insert your device’s audio cable’s connectors into the RED
and WHITE jack of the supplied side AV connection cable. Colours of the connected
jacks should match.
5Vdc Max:500mA
HDMI
5Vdc Max:500mA
SIDE AV
Note: You should use audio inputs of side AV connection cable (RED & WHITE)
to enable sound connection when connecting a device to your TV by using PC or
COMPONENT VIDEO input.
Aerial Connection
IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.
After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the •
mains. Plug the power cable to the mains socket outlet.
Aerial Connection
Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.•
HDMI 3
English - 9 -
01_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076864_50208406.indd 901_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076864_50208406.indd 9 26.12.2011 14:28:1026.12.2011 14:28:10
Using USB Inputs
Recorded p r o g r a m m e s a r e split into 4G B
•
partitions.
USB Connection
You can connect a USB hard disk drive or USB •
memory stick to your TV by using the USB inputs
of the TV. This feature allows you to play fi les stored
in a USB drive or record programmes.
2.5” and 3.5” inch (hdd with external power supply) •
external hard disk drives are supported.
To record a programme, you should fi rst connect •
a USB disk to your TV while the TV is switched
off. You should then switch on the TV to enable
recording feature. Otherwise, recording feature will
not be available.
IMPORTANT !
You may back up your fi les before making any •
connections to the TV set in order to avoid any
possible data loss. Note that manufacturer will not
be responsible for any fi le damage or dataloss.
It is possible that certain types of USB devices (e.g. •
MP3 Players) or USB hard disk drives/memory sticks
may not be compatible with this TV.
IMPORTANT: The TV supports only FAT32 and
NTFS disk formatting. However, NTFS format is not
supported for recording features. For recording, if you
connect a USB disk with NTFS format, the TV will ask
you to format the content. See the section, “Format
Disk” in the following pages for more information on
disk formatting.
Note that ALL the data stored on the USB disk will
be lost and then the disk format will be converted to
FAT32 in such a case.
USB Disk Connection
• Plug your USB device to the USB input of the TV.
Note: Plug or unplug your USB disk while the TV is
switched off.
Note: If you are going to connect a USB hard disk drive
to the TV set, USB connection cable used between
the disk drive and the TV should have a USB logo
and should be as short as possible.
Note: While formatting a USB hard disk that has 1TB
(Tera Byte) or more fi le capacity, you can experience
problems with the formatting process. In such a
case, you should format the disk with your personal
computer and the formatted disk type should be
FAT32.
SIDE VIEW USB MEMORY
CAUTION !
Quickly plugging and unplugging USB devices, •
is a very hazardous operation. Especially, do not
repeatedly quickly plug and unplug the drive. This
may cause physical damage to the USB player and
especially the USB device itself.
Do not pull out USB module while playing or •
recording a fi le.
Programme Recording
To record a programme, you should fi rst connect a
USB disk to your TV while the TV is switched off.
You should then switch on the TV to enable recording
feature.
IMPORTANT: When using a new USB hard disk drive,
it is recommended that you fi rst format the disk using
your TV’s “Format Disk” option.
For using recording function, you should connect a •
USB disk or an external hard disk drive to the TV
and connected USB disk should have at least 1 GB
capacity and should have 2.0 speed compatibility.
If the connected USB device does not support 2.0
speed, an error message will be displayed.
Note: Recorded programmes are saved into the
connected USB disk. If desired, you can store/copy
recordings on a computer; however, these fi les will
not be available to be played on a computer. You can
play the recordings only via your TV.
For more information on recording programmes, •
see sections “Instant Recording”, “Timeshifting”,
“Electronic Programme Guide”, “Recordings Library”
or “Recording Timers” in the following parts.
Recorded programmes are split into 4GB
•
partitions.
Recorded programmes are stored in the following •
directory of the connected USB disk: \DVR\RECS.
All recordings are indicated with a number. A text
(txt) fi le is created for each recording. This text
file includes information such as broadcaster,
programme, and recording time.
Timeshifting may be stopped according to USB •
device write speed. If the USB device speed is not
enough for video stream bitrate, timeshifting may
be stopped and recording may fail. If HD service
bitrate is greater than 13 Mbp/sec. some freeze can
be seen during timeshifting on both USB disk and
on external HDD.Recordings of HD programmes
can occupy bigger size on the USB disk depending
on the broadcast’s resolution. For this reason it
is recommended to use USB hard disk drives for
recording HD programmes.
Do not plug out the USB/HDD during the recording. •
This may harm the connected USB/HDD.
English - 10 -
01_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076864_50208406.indd 1001_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076864_50208406.indd 10 26.12.2011 14:28:1126.12.2011 14:28:11
Multipartiton support is available. Maximum two •
different partitions are supported. If the disk have
more than two partitions, crash may occur. First
partition of the usb disk is used for PVR ready
features. It also must be formatted as primary
partition to be used for PVR ready features.
Some stream packets may not be recorded because •
of signal problems, so sometimes video may freezes
during playback.
Record, Play, Pause, Display (for PlayListDialog) •
keys could not be used when teletext is ON. If a
recording starts from timer when teletext is ON,
teletext is automatically turned off. Also teletext
usage is disabled when there is ongoing recording
or playback.
Radio record is not supported.•
The TV can record programmes up to ten hours.•
Connecting the TV to a PC
For displaying your computer’s screen image on your
TV, you can connect your computer to the TV set.
Power off both computer and display before making
any connections. Use a 15-pin D-sub display cable
to connect a PC to the TV. When the connection is
made, switch to PC source. See “Input selection”
section. Set the resolution that suits your viewing
requirements. Resolution information can be found
in the appendix.
Connecting to a DVD Player
If you want to connect a DVD player to your TV,
you can use the connectors of the TV set. DVD
players may have different connectors. Please refer
to your DVD player’s instruction book for additional
information. Power off both the TV and the device
before making any connections.
Note: Cables shown in the illustration are not
supplied.
If your DVD player has a HDMI socket, you can •
connect via HDMI. When you connect to a DVD
player as illustrated below, switch to HDMI source.
See, “Input Selection” section.
DVD players can also be connected through •
COMPONENT SOCKETS. Use a component video
cable to connect video input. For enabling audio,
use a component audio cable as illustrated below.
When the connection is made, switch to YPbPr
source. See, “Input selection” section.
You may also connect through the SCART 1 or •
SCART 2. Use a SCART cable as shown below.
Note: These three methods of connection perform the
same function but in different levels of quality. It is not
necessary to connect by all three methods.
HDMI
Audio inputs of the TV
PC audio cable
(not supplied)
Audio output of the PC
Note: If you connect a PC to the TV using HDMI
connection, radio interference may occur. Therefore
this type of connection is not recommended. You
should use VGA connection instead.
01_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076864_50208406.indd 1101_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076864_50208406.indd 11 26.12.2011 14:28:1126.12.2011 14:28:11
PC input of the TV
PC VGA cable
(not supplied)
Monitor output of the PC
Scart sockets
English - 11 -
Component
video
inputs
Component
audio
inputs
DVD Player
HDMI
inputs
Using Side AV Connectors
You can connect a range of optional equipment to your
LED TV using side connectors of the TV.
For connecting a camcorder or camera , you should •
use AV socket (side). To do this, you must use the
supplied audio/video connection cable. First, plug
single jack of the cable to the TV’s AV IN socket
(side). Afterwards, insert your camera cable’s
(not supplied) connectors into the plural part of
the audio/video connection cable. Colours of the
connected jacks should match (YELLOW for VIDEO
connection, WHITE/RED for audio connection). See
illustration below.
Headphone
AV Connection
Cable (supplied)
Afterwards, you should switch to • Side AV source.
See the section Input selection in the following
sections for more information.
To listen the TV sound from headphones, you •
should connect headphones to your TV by using the
HEADPHONE jack as illustrated above.
Using Other Connectors
You can connect a range of optional equipment to your
TV. A possible connection is shown below. Note that
cables shown in the illustration are not supplied.
For connecting to a device that has SPDIF support, •
use an appropriate SPDIF cable to enable sound
connection.
A device that
supports
SPDIF signal.
AV Cable
(Not supplied)
Camera
Remote Control Handset
Inserting Batteries
Remove the battery cover located on the back of •
the handset by gently pulling backwards from the
indicated part.
Insert two • AAA/R3 or equivalent type batteries
inside. Observe the correct polarity (+/-) when
inserting batteries and replace the battery cover.
Note: Remove the batteries from the remote control
handset when it will not be used for a long period.
Otherwise it can be damaged due to any leakage of
batteries. Remote range is approximately 7m/23ft.
Switching On/Off
To Switch the TV On
Connect the power cord to the 220-240V AC, 50 Hz. •
Press STANDBY touch button. Then the standby •
LED lights up.
To switch the TV on from standby mode either:•
Press the “•
the remote control.
Press the • -P/CH or P/CH+ touch button on the TV. The
TV will then switch on.
Note: If you switch on your TV via PROGRAMME UP/
DOWN buttons on the remote control or on the TV
set, the programme that you were watching last will be
reselected.
To Switch the TV Off
Press the “• ” button on the remote control or press
the “
to standby mode.
To power down the TV completely, unplug the •
power cord from the mains socket.
Note: When the TV is switched to standby mode,
standby LED can blink to indicate that features such as
Standby Search, Over Air Download or Timer is active.
The LED can also blink when you switch on the TV from
standby mode.
” button, P+ / P- or a numeric button on
” touch button on the TV, so the TV will switch
English - 12 -
01_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076864_50208406.indd 1201_MB69_[GB]_DVB-T_5103UK_42912LED_GOLD17_10076864_50208406.indd 12 26.12.2011 14:28:1226.12.2011 14:28:12
Loading...