Finlux 32H502 User Manual
happy Finnish
32in LCD TV
32H502
Owner’s manual
Contents
Package Contents .................................................. 2
Features ................................................................. 2
Introduction ............................................................. 3
Preparation ............................................................. 3
Safety Precautions ................................................. 3
Electrical devices not in the hands of children .... 4
Environmental Information ..................................... 5
Repair Information .............................................. 5
Remote Control Buttons ......................................... 6
TV and Operating Buttons ...................................... 7
Viewing the Connections - Back Connectors ......... 7
Viewing the Connections - Side Connectors .......... 8
Aerial Connection ................................................... 8
Power Connection .............................................. 8
Using USB Media ................................................... 9
Connecting the TV to a PC ................................... 10
Connecting to a DVD Player................................. 10
Using Side AV Connectors ................................... 10
Remote Control Handset .......................................11
Inserting Batteries ..............................................11
Switching On/Off ....................................................11
To Switch the TV On ..........................................11
To Switch the TV Off ..........................................11
Input Selection .......................................................11
Basic Operations ...................................................11
Operation with the Buttons on the TV ................11
Operation with the Remote Control ...................11
First Time Installation............................................ 12
Viewing Electronic Programme Guide (EPG) ....... 13
EPG Timeline Schedule .................................... 13
EPG Channel Schedule .................................... 13
EPG Now and Next........................................... 14
Recording via EPG Screen ............................... 14
Programme Options.......................................... 14
Installation ............................................................ 14
Auto Channel Scan (Retune) Menu Operation . 14
Manual Tuning ..................................................... 15
Digital Manual Search....................................... 15
Analogue Manual Search ................................. 15
Analogue Fine Tune.......................................... 15
Managing Stations: Channel List .......................... 15
Operating the Channel List ............................... 15
Moving a Channel ............................................. 16
Deleting a Channel ........................................... 16
Renaming a Channel ........................................ 16
Locking a Channel ............................................ 16
Managing Stations: Favourites ............................. 16
Button Functions ............................................... 16
Managing Stations: Sorting the Channel List ....... 16
On-Screen Information ......................................... 17
Media Playback Using Media Browser ................. 17
Viewing Videos via USB .................................. 17
Viewing Photos via USB ................................... 18
Slideshow Options ............................................ 18
Playing Music via USB ..................................... 18
Recordings Library............................................ 19
Media Browser Settings .................................... 19
Timeshift Recording ............................................. 19
Instant Recording ................................................. 20
Watching Recorded Programmes ....................... 20
Changing Image Size: Picture Formats ................ 21
Confi guring Picture Settings ................................. 22
Operating Picture Settings Menu Items ............ 22
Picture Settings Menu Items ............................. 22
PC Picture Settings........................................... 22
Confi guring Sound Settings .................................. 23
Operating Sound Settings Menu Items ............. 23
Sound Settings Menu Items.............................. 23
Confi guring Your TV’s Settings ............................. 23
Operating Settings Menu Items ........................ 24
Settings Menu Items ......................................... 24
Using a Conditional Access Module (not
included) ............................................................... 24
Viewing Conditional Access Menu (*) ............... 24
Confi guring Language Preferences ...................... 24
Parental Control.................................................... 25
Parental Settings Menu Operation ................... 25
Timers ................................................................... 25
Setting Sleep Timer .......................................... 25
Setting Programme Timers ............................... 25
Adding a Timer .............................................. 25
Editing a Timer .............................................. 25
Deleting a Timer ............................................ 26
Recording Confi guration ....................................... 26
Confi guring Date/Time Settings ............................ 26
Confi guring Source Settings ................................. 27
Confi guring Other Settings ................................... 27
Operation .......................................................... 27
Other Features ..................................................... 28
Teletext ................................................................. 28
Tips ....................................................................... 29
Appendix A: PC Input Typical Display Modes ....... 30
Appendix B: AV and HDMI Signal Compatibility
(Input Signal Types) .............................................. 30
Appendix C: Supported DVI Resolutions.............. 31
Appendix D: Software Upgrade ............................ 31
Appendix E : Supported File Formats for USB
Mode..................................................................... 32
Specifi cations ....................................................... 33
Important Instruction ............................................. 34
- 1 -
01_MB62_[GB]_woypbpr_IDTV_PVR_NICKEL17_5110UK_32930W_10079663_50221270.indd 101_MB62_[GB]_woypbpr_IDTV_PVR_NICKEL17_5110UK_32930W_10079663_50221270.indd 1 11.05.2012 14:21:0111.05.2012 14:21:01
Package Contents
LANG SUBTITLE
SCREEN
ZOOM
ROOT
REPEAT
TITLE
1
3
2
4
6
5
789
0
TEXT
SWAP
INFO
SOURCE
P+
OK
P-V+V-
MENU
RETURN
FAV SLEEP EPG
SEARCH
DISPLAY
PRESETS
MODE
Remote Control
Note: You should check the contents after opening
your purchase and make sure that every item is
included.
Note: The HDMI connection between PC and TV
may cause radio interference in which case it is
recommended to use VGA(DSUB-15) connection.
LCD TV
Instruction Book
Batteries: 2 X AAA
Features
Remote controlled colour LCD TV.•
Fully integrated Terrestrial digital TV (DVB-T •
MPEG2).
HDMI connectors for digital video and audio.•
USB input.•
Programme recording•
Programme timeshifting•
1000 programmes (analogue+digital).•
On Screen Display (OSD) menu system.•
Integrated tuner DVB-T, MPEG2 compatible.•
Scart socket for external devices.•
Stereo sound system. (Nicam)•
Teletext, fastext, TOP text.•
Headphone connection.•
Automatic programming system.•
Forward or backward manual tuning.•
Sleep timer / Child lock.•
Automatic sound mute when no transmission.•
NTSC playback.•
AVL (Automatic Volume Limiting).•
Auto power down.•
PLL (Frequency Search).•
PC input.•
Plug&Play for Windows 98, ME, 2000, XP, Vista, •
Windows 7.
Game Mode•
- 2 -
01_MB62_[GB]_woypbpr_IDTV_PVR_NICKEL17_5110UK_32930W_10079663_50221270.indd 201_MB62_[GB]_woypbpr_IDTV_PVR_NICKEL17_5110UK_32930W_10079663_50221270.indd 2 11.05.2012 14:21:0111.05.2012 14:21:01
Introduction
Thank you for choosing this product. This manual
will guide you through the proper operation of your
TV. Before operating the TV, please read this manual
thoroughly. Please keep this manual in a safe place
for future reference.
This device is intended to receive and display TV
programmes. The different connection options make
an additional expansion of the reception and display
sources possible (receiver, DVD player, DVD recorder,
VCR, PC etc.).
This device is only suitable for dry indoor use. This
appliance is intended solely for private domestic use
and may not be used for industrial and commercial
purposes. We exclude liability in principle, if the device
is not used as intended, or unauthorized modifi cations
have been made. To operate your LCD TV in extreme
ambient conditions may cause the damage of the
device.
Preparation
For ventilation, leave a free space of at least 10 cm
all around the set. To prevent any fault and unsafe
situations, please do not place any objects on top of
the set. Use this device in moderate climates.
10 cm
10 cm
10 cm
Safety Precautions
Read the following recommended safety
precautions carefully.
Power Source
The TV set should be operated only from a 220-240V
AC, 50 Hz outlet. Ensure that you select the correct
voltage setting for your convenience.
Power Cord
Do not place the set, a piece of furniture, etc. on the
power cord or pinch the cord. Handle the power cord
by the plug. Do not unplug the appliance by pulling from
the power cord and never touch the power cord with wet
hands as this could cause a short circuit or electric shock.
Never make a knot in the cord or tie it with other cords.
The power cord should be placed in such a way that they
are not likely to be stepped on. A damaged power cord
can cause fi re or give you an electric shock. When it is
damaged and needs to be replaced, it should be done
by qualifi ed personnel.
Moisture and Water
Do not use this device in a humid and
damp place Change the wording in
the brackets to “(avoid using in the
bathroom, near the sink in the kitchen
etc.)” Do not expose this device to rain
or water, as this may be dangerous and
do not place objects fi lled with liquids,
such as fl ower vases, on top.
If any solid object or liquid falls into the cabinet, unplug
the TV and have it checked by qualifi ed personnel
before operating it any further.
Cleaning
Before cleaning, unplug the TV set
from the wall outlet. Do not use liquid or
aerosol cleaners. Use a soft, dry cloth.
Ventilation
The slots and openings on the TV set
are intended for ventilation and to ensure reliable
operation. To prevent overheating, these openings
must not be blocked or covered in anyway.
Heat and Flames
The set should not be placed near to
open fl ames or sources of intense heat
such as an electric heater. Ensure that
no open fl ame sources, such as candles,
are placed on top of the TV. Batteries should not be
exposed to excessive heat such as sunshine, fi re or
the like.
Lightning
In case of storm and lightning or when
going on holiday, disconnect the power
cord from the wall outlet.
Replacement Parts
When replacement parts are required, make sure that
the service technician has used replacement parts,
which are specifi ed by the manufacturer or have the
same specifi cations as the original one. Unauthorized
substitutions may result in fi re, electrical shock or
other hazards.
Servicing
Please refer all servicing to qualifi ed
personnel. Do not remove the cover
yourself as this may result in an electric
shock.
- 3 -
01_MB62_[GB]_woypbpr_IDTV_PVR_NICKEL17_5110UK_32930W_10079663_50221270.indd 301_MB62_[GB]_woypbpr_IDTV_PVR_NICKEL17_5110UK_32930W_10079663_50221270.indd 3 11.05.2012 14:21:0211.05.2012 14:21:02
Waste Disposal
Instructions for waste disposal:
• Packaging and packaging aids are recyclable
and should principally be recycled. Packaging
materials, such as a foil bag, must be kept away
from children.
• Batteries, including those which are heavy metalfree, should not be disposed of with household
waste. Please dispose of used batteries in an
environmentally friendly manner. Find out about the
legal regulations which apply in your area.
Do not try to recharge batteries, there is a danger •
of explosion. Replace batteries only with the same
or equivalent type.
This symbol on the product or on its packaging means
that your electrical device should be
disposed at the end of its service life
separately from your household wastes.
There are separate collection systems for
recycling in the EU. For more information,
please contact the local authority or the
dealer where you purchased the
product.
Disconnecting the Device
The mains plug is used to disconnect the TV set
from the mains and therefore it must remain readily
operable.
Headphone Volume
Excessive sound pressure from earphones
and headphones can cause hearing loss.
Installation
To prevent injury, this device must be securely
attached to the wall in accordance with the installation
instructions when mounted to the wall (if the option
is available).
LCD Screen
The LCD panel is a very high technology product with
about a million thin fi lm transistors, giving you fi ne
picture details. Occasionally, a few non-active pixels
may appear on the screen as a fi xed blue, green or
red point. Please note that this does not affect the
performance of your product.
Warning! Do not leave your TV in standby or operating
mode when you leave your house.
Connection to a Television Distribution
System (Cable TV etc.) from Tuner
Devices connected to the protective earthing of the
building installation through the mains connection or
through other apparatus with a connection to protective
earthing-and to a television distribution system using
a coaxial cable, may in some circumstances create
a fi re hazard.
Connection to a cable distribution system has
therefore to be provided through a device providing
electrical isolation below a certain frequency range
(galvanic isolator, see EN 60728-11).
Electrical devices not in the hands of
children
Never let children use electrical devices unsupervised.
Children cannot always recognize properly any
possible danger. Batteries / accumulators can be life
threatening when swallowed. Store batteries out of
the reach of small children. In case of swallowing a
battery, medical aid has to be sought immediately.
Also keep the packaging away from children as there
is danger of suffocation.
The Standby button does not fully switch off this
product. Moreover, the device continues to consume
power in standby mode. In order to separate the
device completely from mains, the mains plug has to
be pulled from the mains socket. Because of that the
device should be set up in a way, that an unobstructed
access to the mains socket is guaranteed, so that
in case of emergency the mains plug can be pulled
immediately. During periods of prolonged non-use,
the TV should be disconnected from the mains power
supply.
TRADEMARK ACKNOWLEDGMENT
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
Licence Notifi cation (Optional)
Manufactured under license from Dolby
Laboratories.
- 4 -
01_MB62_[GB]_woypbpr_IDTV_PVR_NICKEL17_5110UK_32930W_10079663_50221270.indd 401_MB62_[GB]_woypbpr_IDTV_PVR_NICKEL17_5110UK_32930W_10079663_50221270.indd 4 11.05.2012 14:21:0311.05.2012 14:21:03
Environmental Information
This television is designed to consume less energy to save the environment. •
You not only help to save the environment but you can also save money by reducing electricity bills thanks to the
energy effi ciency features of this TV. To reduce energy consumption, you should take the following steps:
You can use the Power Save Mode setting, located in the • Other settings menu. If you set the Power Save
Mode as On, the TV will switch to energy-saving mode and the luminance level of the TV set will be decreased
to optimum level. Note that some picture settings will be unavailable when the TV is in Power Save Mode.
When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also reduce •
energy consumption.
Note that annually, using the TV set in Power Save Mode has more power effi ciency than disconnecting •
the TV from the mains plug instead of keeping stand-by mode. Therefore it is highly recommended to
activate Power Save Mode setting to reduce your annual power consumption. And also it is recommended
to disconnect the TV from the mains plug to save energy more when you do not use.
• Please help us to save environment by following these steps.
Repair Information
Please refer all servicing to qualifi ed personnel. Only qualifi ed personnel must repair the TV. Please contact
your local dealer, where you purchased this TV for further information.
- 5 -
01_MB62_[GB]_woypbpr_IDTV_PVR_NICKEL17_5110UK_32930W_10079663_50221270.indd 501_MB62_[GB]_woypbpr_IDTV_PVR_NICKEL17_5110UK_32930W_10079663_50221270.indd 5 11.05.2012 14:21:0411.05.2012 14:21:04
Remote Control Buttons
No function1.
Play (in Media Browser mode) 2.
Programme recording3.
Rapid reverse (in Media Browser mode)4.
No function5.
Mono/Stereo - Dual I-II / Current Language (*) / 6.
Play preview (in Media Browser mode)
Image size 7.
Green button 8.
Red button9.
Numeric buttons10.
Teletext / Mix 11.
Info / Reveal (in TXT mode)12.
Programme Down - Page up / Programme Up - 13.
Page down
Mute14.
Favourite mode selection15.
Exit (in DTV mode) / Return / Index page (in 16.
TXT mode)
No function (*)17.
No function18.
Recordings Library19.
Picture mode selection 20.
Electronic Programme Guide21.
Sleep timer22.
Menu on/off23.
OK / Select / Hold (in TXT mode) / Channel List24.
Volume up / down25.
Navigation buttons26.
AV / Source27.
Previous programme / Now (in EPG mode)28.
Blue button29.
Yellow button 30.
No function (**)31.
Subtitle on-off / TXT subtitle (analogue TV 32.
mode) / Subtitle (in Media Browser mode).
No function33.
Rapid advance (in Media Browser mode)34.
Stop (in Media Browser mode)35.
Pause / Timeshift recording36.
Standby37.
Operation LED light38.
LANG SUBTITLE
SCREEN
ZOOM
1
4
7
TEXT
INFO
P+
P-
RETURN
ROOT
REPEAT
2
5
8
0
SOURCE
OK
MENU
FAV SLEEP EPG
SEARCH
DISPLAY
MODE
TITLE
3
6
9
SWAP
V+
V-
PRESETS
These buttons change according to the model:
/ Media Browser (optional) (*) or Angle / No
function (*)
/ Web Browser (optional) (**) or Pip / Pip function
(optional) (**)
- 6 -
01_MB62_[GB]_woypbpr_IDTV_PVR_NICKEL17_5110UK_32930W_10079663_50221270.indd 601_MB62_[GB]_woypbpr_IDTV_PVR_NICKEL17_5110UK_32930W_10079663_50221270.indd 6 11.05.2012 14:21:0411.05.2012 14:21:04
TV and Operating Buttons
FRONT and REAR VIEW Control switch VIEW Control Switch
Standby button1.
TV/AV button2.
Programme Up/Down buttons3.
Volume Up/Down buttons4.
Note: Press
“ ” / “ ”
buttons at the same time to view
main menu.
Viewing the Connections - Back Connectors
I
I HM2
D
D
HM1
SPDIF
Coax.OUT
HDMI 2: HDMI Input1.
HDMI 1: HDMI Input2.
HDMI Inputs are for connecting a device that has an HDMI socket. Your TV is capable of displaying
High Defi nition pictures from devices such as a High Defi nition Satellite receiver or Blu Ray Player.
These sockets can receive a number of different resolutions. Please see Appendix B for all compatible
resolutions.
RF Input3. connects to an aerial antenna system.
Note: If you use a decoder or a media recorder, you should connect the aerial cable through the device to
the television with an appropriate antenna cable, as shown in the illustration in the following pages.
SCART 4. input or output for external devices. Connect the SCART cable between the SCART socket on the
TV and the SCART socket on your external device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.
- 7 -
01_MB62_[GB]_woypbpr_IDTV_PVR_NICKEL17_5110UK_32930W_10079663_50221270.indd 701_MB62_[GB]_woypbpr_IDTV_PVR_NICKEL17_5110UK_32930W_10079663_50221270.indd 7 11.05.2012 14:21:0511.05.2012 14:21:05
Note: S-VHS signal is supported via the scart socket(optional).
VGA Input5. is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.
SPDIF Out6. outputs audio signals of the currently watched source.
Use an SPDIF cable to trasfer audio signals to a device that has SPDIF input.
Viewing the Connections - Side Connectors
The CI Slot is used for inserting a CI card. A CI card allows you to view all the 1.
channels that you subscribe to. For more information, see “Conditional Access”
section.
Side USB input.2.
Note: That programme recording feature is available via this USB input. You can
connect external hard disk drives to this input.
Video Input is used for connecting video signals of external devices.Connect the 3.
video cable between the VIDEO IN socket on the TV and the VIDEO OUT jack on
your device.
Audio Inputs are used for connecting audio signals of external devices. Connect the 4.
audio cable between the AUDIO INPUTS on the TV and the AUDIO OUTPUT jacks
on your device.
Note: If you connect a device to the TV via the VIDEO INPUT, you should also connect
your device with an audio cable to the AUDIO INPUTS of the TV to enable audio.
The headphone jack is used for connecting an external headphone to the system. 5.
Connect to the HEADPHONE jack to listen to the TV from headphones.
Aerial Connection
Connect the aerial to the • AERIAL INPUT (ANT) socket located at the rear of the TV.
DMHI 2
HDMI 1
SPDIF
Coax.OUT
Power Connection
IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.
After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the •
mains.
- 8 -
01_MB62_[GB]_woypbpr_IDTV_PVR_NICKEL17_5110UK_32930W_10079663_50221270.indd 801_MB62_[GB]_woypbpr_IDTV_PVR_NICKEL17_5110UK_32930W_10079663_50221270.indd 8 11.05.2012 14:21:1311.05.2012 14:21:13
Using USB Media
Rec o r d e d progra m m e s are sp l i t i nto 4G B
•
partitions.
USB Connection
You can connect a USB hard disk drive or USB •
memory stick to your TV by using the USB inputs
of the TV. This feature allows you to play fi les stored
in a USB drive or record programmes.
2.5” and 3.5” inch (hdd with external power supply) •
external hard disk drives are supported.
To record a programme, you should fi rst connect •
a USB disk to your TV while the TV is switched
off. You should then switch on the TV to enable
recording feature. Otherwise, recording feature will
not be available.
IMPORTANT !
You may back up your fi les before making any •
connections to the TV set in order to avoid any
possible data loss. Note that manufacturer will not
be responsible for any fi le damage or dataloss.
It is possible that certain types of USB devices (e.g. •
MP3 Players) or USB hard disk drives/memory sticks
may not be compatible with this TV.
IMPORTANT: The TV supports only FAT32 disk
formatting. NTFS format is not supported. If you
connect a USB disk with NTFS format, the TV will ask
you to format the content. See the section, “Format
Disk” in the following pages for more information on
disk formatting.
Note that ALL the data stored on the USB disk will
be lost and then the disk format will be converted to
FAT32 in such a case.
USB Disk Connection
• Plug your USB device to the USB input of the TV.
Note: Plug or unplug your USB disk while the TV is
switched off.
Note: If you are going to connect a USB hard disk drive
to the TV set, USB connection cable used between
the disk drive and the TV should have a USB logo
and should be as short as possible.
Note: While formatting a USB hard disk that has 1TB
(Tera Byte) or more fi le capacity, you can experience
problems with the formatting process. In such a
case, you should format the disk with your personal
computer and the formatted disk type should be
FAT32.
SIDE VIEW USB MEMORY
USB
5Vdc
Max:500mA
CAUTION !
Quickly plugging and unplugging USB devices, •
is a very hazardous operation. Especially, do not
repeatedly quickly plug and unplug the drive. This
may cause physical damage to the USB player and
especially the USB device itself.
Do not pull out USB module while playing or •
recording a fi le.
Programme Recording
To record a programme, you should fi rst connect a
USB disk to your TV while the TV is switched off.
You should then switch on the TV to enable recording
feature.
IMPORTANT: When using a new USB hard disk drive,
it is recommended that you fi rst format the disk using
your TV’s “Format Disk” option.
For using recording function, you should connect a •
USB disk or an external hard disk drive to the TV
and connected USB disk should have at least 1 GB
capacity and should have 2.0 speed compatibility.
If the connected USB device does not support 2.0
speed, an error message will be displayed.
Note: Recorded programmes are saved into the
connected USB disk. If desired, you can store/copy
recordings on a computer; however, these fi les will
not be available to be played on a computer. You can
play the recordings only via your TV.
For more information on recording programmes, •
see sections “Instant Recording”, “Timeshifting”,
“Electronic Programme Guide”, “Recordings Library”
or “Recording Timers” in the following parts.
Recorded programmes are split into 4GB
•
partitions.
Recorded programmes are stored in the following •
directory of the connected USB disk: \DVR\RECS.
All recordings are indicated with a number. A text
(txt) fi le is created for each recording. This text
file includes information such as broadcaster,
programme, and recording time.
Timeshifting may be stopped according to USB •
device write speed. If the USB device speed is not
enough for video stream bitrate, timeshifting may
be stopped and recording may fail. If HD service
bitrate is greater than 13 Mbp/sec. some freeze can
be seen during timeshifting on both USB disk and
on external HDD.
Recordings of HD programmes can occupy bigger •
size on the USB disk depending on the broadcast’s
resolution. For this reason it is recommended
to use USB hard disk drives for recording HD
programmes.
Do not plug out the USB/HDD during the recording. •
This may harm the connected USB/HDD.
- 9 -
01_MB62_[GB]_woypbpr_IDTV_PVR_NICKEL17_5110UK_32930W_10079663_50221270.indd 901_MB62_[GB]_woypbpr_IDTV_PVR_NICKEL17_5110UK_32930W_10079663_50221270.indd 9 11.05.2012 14:21:1411.05.2012 14:21:14
Multipartiton support is available. Maximum two •
different partitions are supported. If the disk have
more than two partitions, crash may occur. First
partition of the usb disk is used for PVR ready
features. It also must be formatted as primary
partition to be used for PVR ready features.
Some stream packets may not be recorded because •
of signal problems, so sometimes video may freezes
during playback.
Record, Play, Pause, Display (for PlayListDialog) •
keys could not be used when teletext is ON. If a
recording starts from timer when teletext is ON,
teletext is automatically turned off. Also teletext
usage is disabled when there is ongoing recording
or playback.
• Radio record is not supported.
• The Tv can record programmes up to ten hours.
Connecting the TV to a PC
For displaying your computer’s screen image on your
TV, you can connect your computer to the TV set.
Power off both computer and display before making
any connections. Use a 15-pin D-sub display cable to
connect a PC to the TV. When the connection is made,
switch to PC source. See the Input selection section.
Use a PC audio cable between the audio output of
your PC and the audio input of the TV to enable the
playback of sound through your TV Set the resolution
that suits your viewing requirements. Resolution
information can be found in the appendix.
Audio inputs of the TV
PC input of the TV
Connecting to a DVD Player
If you want to connect a DVD player to your LCD
TV, you can use connectors of the TV set. DVD
players may have different connectors. Please refer
to your DVD player’s instruction book for additional
information. Power off both the TV and the device
before making any connections.
Note: Cables shown in the illustration are not
supplied.
If your DVD player has an HDMI socket, you can •
connect via HDMI. When you connect to DVD player
as illustrated below, switch to HDMI source. See,
“Input Selection” section.
Most DVD players are connected through •
COMPONENT SOCKETS. Use a component video
cable to connect video input. For enabling audio,
use a component audio cable as illustrated below.
When the connection is made, switch to YPbPr
source. See, “Input selection” section.
You may also connect through the SCART. Use a •
SCART cable as shown below.
Note: These three methods of connection perform the
same function but in different levels of quality. It is not
necessary to connect by all three methods.
Video Connection
PC audio cable
(not supplied)
Audio output of the PC
PC VGA cable
(not supplied)
Monitor output of the PC
Scart socket
YPbPr to PC
cable (optional)
DVD player
HDMI
inputs
Using Side AV Connectors
You can connect a range of optional equipment to
your LCD TV..
Note: If you connect a PC to the TV using HDMI
connection, radio interference may occur. Therefore
this type of connection is not recommended. You
should use VGA connection instead.
01_MB62_[GB]_woypbpr_IDTV_PVR_NICKEL17_5110UK_32930W_10079663_50221270.indd 1001_MB62_[GB]_woypbpr_IDTV_PVR_NICKEL17_5110UK_32930W_10079663_50221270.indd 10 11.05.2012 14:21:1411.05.2012 14:21:14
For connecting a camcorder, connect to the VIDEO •
IN socket and the AUDIO SOCKETS. Do not connect
the camcoder to VIDEO IN socket at the same time
since it can cause noise in the picture. For selecting
the related source, see the section “Input selection”
in the following parts.
To listen the TV sound from headphones, connect •
to the HEADPHONE jack of theTV.
- 10 -
Loading...