The PVS-50/60-TL is FIMER’s cloud connected
three-phase string solution enabling cost
efficient large decentralized photovoltaic systems
for both commercial and utility applications.
From 50 to 60 kW
String inverter - PVS-50/60-TL
Communication and control board
Version -SX
Version -SX2
This new addition to the PVS string inverter family, with 3
independent MPPT and power ratings of up to 60 kW, has been
designed with the objective to maximize the ROI in large systems
with all the advantages of a decentralized configuration for both
rooftop and ground-mounted installations.
Compact design
Thanks to technological choices aimed at optimizing installation
times and costs, the product design features the power module and
wiring box enclosed in a single compact chassis thus saving
installation resources and costs.
The inverter comes in multiple versions also allowing the possibility
to connect to third-party DC string combiners.
Ease of installation
The horizontal and vertical mounting possibility creates flexibility for
both rooftop and ground mounted installations.
Moreover the cover is equipped with hinges and locks that are fast
to open and reduce the risk of damaging the chassis and interior
components when commissioning and performing maintenance
actions.
Advanced cloud connected features
Standard wireless access from any mobile device makes the
configuration of inverter and plant easier and faster. Improved user
experience thanks to a built-in User Interface (UI) enables access to
advanced inverter configuration settings.
The Installer for Solar Inverters mobile app and configuration wizard
enable a quick multi-inverter installation, saving up to 70%
commissioning time.
Fast system integration
Industry standard Modbus (RTU/TCP)/SUNSPEC protocol enables
fast system integration. Two ethernet ports enable fast and
future-proof communication for PV plants.
Plant portfolio integration
Monitoring your assets is made easy, as every inverter is capable to
connect to Aurora Vision cloud platform to secure your assets and
profitability in long term.
Highlights
• Up to 3 independent MPPT
• Two power ratings: 50 kW at 400 Vac and 60 kW at 480 Vac
• Horizontal and vertical installation
• Easy access to wiring box thanks to hinges and cam latches
positioned on cover
• Power module and wiring box in a single compact chassis
• Wi-Fi interface for commissioning and configuration
• Reactive power management capability
• Remote monitoring and firmware upgrade via Aurora Vision cloud
platform (logger free)
• Provides 10% extra power in case of limited ambient temperature
• Improved operating altitude. Can work up to 4000 mt.
• Built-in dynamic export limitation control algorithm
PVS-50/60-TL string inverter block diagram
IN1A(+)
IN1B(+)
IN1C(+)
IN1D(+)
IN1E(+)
IN1A(-)
IN1B(-)
IN1C(-)
IN1D(-)
IN1E(-)
IN2A(+)
IN2B(+)
IN2C(+)
IN2D(+)
IN2E(+)
IN2A(-)
IN2B(-)
IN2C(-)
IN2D(-)
IN2E(-)
IN3A(+)
IN3B(+)
IN3C(+)
IN3D(+)
IN3E(+)
IN3A(-)
IN3B(-)
IN3C(-)
IN3D(-)
IN3E(-)
CH1+
CH2+
CH3+
CH-
IN1+
IN1-
DC SPD
(monitored)
Standard versionVersion -S
IN1A(+)
IN1B(+)
IN1C(+)
IN1D(+)
IN1E(+)
IN1A(-)
IN1B(-)
IN1C(-)
IN1D(-)
IN1E(-)
IN2A(+)
IN2B(+)
IN2C(+)
IN2D(+)
IN2E(+)
IN2A(-)
IN2B(-)
IN2C(-)
IN2D(-)
IN2E(-)
IN3A(+)
IN3B(+)
IN3C(+)
IN3D(+)
IN3E(+)
IN3A(-)
IN3B(-)
IN3C(-)
IN3D(-)
IN3E(-)
CH1+
CH2+
CH3+
CH-
IN1+
IN1-
DC SPD
(monitored)
DC SPD
(monitored)
CH1+
CH2+
CH3+
CH-
DC SPD
(monitored)
DC
Current
readings
MPPT 1
MPPT 2
MPPT 3
DC Current readings
AC SPD signal check
RS-485
(Main)
Bulk caps
Bulk
Voltage
Readings//R_ISO
Readings
(for BST)
Inverter
(DC/AC)
Bulk
Voltage
Readings//R_ISO
Readings
(for INV)
DC/DC
DSP
contr.
Control Circuit
µP
Communication
platform
EthernetEthernet
Line
filter
Grid leakage
current readings
INV
Voltage//
Current
Readings
DC/AC
DSP
contr.
WLAN
Grid parallel relays
DC/DC
DSP
Controller
Grid Voltage
Readings
DC/AC
DSP
Controller
1_RS-485
2_RS-485
Remote control
Alarm
Aux
L1
L2
L3
N
AC SPD
signal
check
PE
+ T/R
- T/R
GND
+ T/R
- T/R
GND
+ R1
+ R2
GND
N.C
N.O
C
N.C
N.O
C
CH1+
CH2+
CH3+
CH-
CH1+
CH2+
CH3+
CH-
String inverter - PVS-50/60-TL
Technical data and types
Type codePVS-50-TLPVS-60-TL
Input side
Absolute maximum DC input voltage (V
Start-up DC input voltage (V
)420…700 V (Default 420 V)420…700 V (Default 500 V)
start
Operating DC input voltage range (V
Rated DC input voltage (V
Rated DC input power (P
)610 Vdc720 Vdc
dcr
)52000 W61800 W
dcr
Number of independent MPPT3 (version SX and SX2) / 1 (versione standard e S)
Maximum DC input power for each MPPT (PMPPT, max)19300W@30°C / 17500W@45°C23100W@30°C / 21000W@45°C
MPPT input DC voltage range (V
Maximum DC input current (I
MPPTmin
) for each MPPT36 A
dcmax
Maximum input short circuit current for each MPPT55 A (165 A in case of parallel MPPT)
Number of DC input pairs for each MPPT5 (SX and SX2 versions), 1 (standard and S version)
DC connection typeScrew terminal block (Standard and -S version) or PV quick fit connector 1) (-SX and SX2 version)
Input protection
Reverse polarity protectionYes, from limited current source
Input over voltage protection for each MPPTType 2 / Type 1 + 2 (option)
Photovoltaic array isolation controlAccording to local standard
DC switch rating for each MPPT (version with DC switch)75 A / 1000 V for each MPPT
Fuse rating (version with fuses) / max fuse rating15A (1000V) / 20A (1000V)
Output side
AC grid connection typeThree-phase (3Ph/N/PE or 3Ph/PE), grounded WYE system only
Rated AC power (P
Maximum AC output power (P
Maximum apparent power (S
Rated AC grid voltage (V
@cosf=1 )50000 W60000 W
acr
@cosf=1)55000 W up to 30°C
acmax
)55000 VA up to 30°C
max
)400 V480 V
ac,r
AC voltage range320...480 V
Maximum AC output current (I
ac,max
Contributory fault current92 A
Rated output frequency (fr)50 Hz / 60 Hz
Output frequency range (f
...f
)47...53 Hz / 57…63 Hz
min
max
Nominal power factor and adjustable range> 0.995; 0...1 inductive/capacitive with maximum Sn
1) Please refer to the document “String inverters – Product manual appendix”
available at www.fimer.com for information on the quick-fit connector brand
and model used in the inverter
2) Due to country specific regulations this value can be limited to the rated value
(50 kW for PVS-50-TL, 60 kW for PVS-60-TL)
3) The AC voltage range may vary depending on specific country grid standards
For more information
please contact
your local FIMER
representative or visit:
fimer.com
We reserve the right to make technical changes or
modify the contents of this document without prior
notice. With regard to purchase orders, the agreed
particulars shall prevail. FIMER does not accept any
responsibility whatsoever for potential errors or possible
lack of information in this document.
4) The Frequency range may vary depending on specific country grid standards
5) Article with dedicated part number, only for SX2 version
6) Inverter version with display can be selected by dedicated part number.
This option in not available in combination with the “SPD type 1+2” option
Remark. Features not specifically listed in the present data sheet are not
included in the product
We reserve all rights in this document and in the subject
matter and illustrations contained therein. Any
reproduction, disclosure to third parties or utilization of
its