Fiesta Outdoor Gas Barbeque / Grill Use And Care Manual

WARNING!
FOR YOUR SAFETY
THIS APPLIANCE IS FOR OUTDOOR USE ONLY SP5117-37
• Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
IF YOU SMELL GAS:
1. Shut off gas supply to the appliance.
2. Extinguish any open flame.
3. Open lid.
4. If odor continues, immediately call your gas supplier or your fire department.
FIESTA GAS GRILLS L.L.C.
One Fiesta Dr. Dickson TN, USA 37055
KEEP YOUR RECEIPT AS PROOF OF PURCHASE TO VALIDATE THE WARRANTY. ATTACH YOUR RECEIPT TO THE INSIDE COVER OF THIS MANUAL FOR EASY REFERENCE.
1
Outdoor Gas Barbeque / Grill
Use and Care Manual
TROUBLESHOOTING GUIDE...PAGE 19
!
WARRANTY INFORMATION
Full Model # (from outer carton):
Date Purchased:
Serial Number (from rating plate):
SAVE THIS MANUAL FOR YOUR FUTURE REFERENCE
Installer must leave these instructions with the consumer for future reference.
Hazardous Fire or Explosion may result if these instructions are ignored.
It is your responsibility to see that your new grill is assembled, installed, maintained and cared for properly. Failing to carefully follow the instructions in this manual could result in serious bodily injury and/or property damage.
FOR YOUR SAFETY
NOTE: CUSTOMER SERVICE TOLL FREE 1-800-396-3838
2
THANK YOU FOR PURCHASING A FIESTA GRILL AND WELCOME TO THE FIESTA
FAMILY!
Fiesta is dedicated to creating the ultimate grill experience by providing you with all the right tools, starting with this manual. It is important to read through the entire booklet prior to using your grill to ensure you fully understand all of the features and how to operate your grill for optimum performance.
The purchase of this grill is only the first step in becoming a member of the Fiesta family, and like all good families, we are here to help. Our dedicated team of customer care support specialists are available year-round to answer any questions you may have including; assembly, cooking questions or tips, warranty issues, locating a retailer close to you or placing an order for replacement or upgraded parts.
It is important to register your new grill with us by mailing in the enclosed warranty card.
Please retain this manual for the lifetime of your grill after recording the serial and model number in the appropriate space allocated on the front cover.
The serial number can be found on the silver rating plate located on the grill base or the back
support.
The full model number can be found on the white label of your grill box or a partial model
number is located above the serial number on the silver rating plate.
Getting Familiar With Your Grill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Caring For Your Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Installation Electrical Caution L.P. Gas Cylinder Hose & Regulator
Cleaning & Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Perform A Leak Test Cleaning Venturi Tubes Cleaning Other Parts of Your Appliance Storage
Using Your Appliance Correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Lighting Re-Lighting Shutting Down Breaking In Your Grill Cooking Techniques
Trouble Shooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
TABLE OF CONTENTS
DO NOT USE YOUR GRILL UNTIL YOU HAVE READ AND UNDERSTOOD ALL THE INFORMATION IN THIS MANUAL.
IT IS EXTREMELY IMPORTANT TO BE SURE THAT:
•Your grill is properly assembled.
• There are no leaks in the gas supply system (see ‘Leak Testing’ section).
• The burner is properly assembled with the venturi tubes seated over the valve outlets (Figure 1 below) and there are no blockages present in the venturi tubes (see ‘Cleaning Venturi Tubes’ section).
• Electrical supply cords and/or gas supply hoses are kept away from any heated surfaces.
• Your grill is positioned in a safe location (see ‘Installation’ section).
Figure 1.
• Ensure valve outlets (orifices) are assembled 3/8” (1 cm) into the venturi tubes.
• Check to see that the valve outlets and venturi tubes are parallel to the bottom of the base casting of your appliance.
BEFORE YOU USE THIS APPLIANCE
WARNING
FAILURE TO ENSURE THE ABOVE MAY RESULT IN A HAZARDOUS FIRE OR EXPLOSION CAUSING SERIOUS BODILY INJURY AND/OR PROPERTY DAMAGE.
GETTING FAMILIAR WITH YOUR GRILL
CARING FOR YOUR EQUIPMENT
INSTALLATION
THE INSTALLATION OF THIS APPLIANCE MUST CONFORM WITH LOCAL CODES OR, IN THE ABSENCE OF LOCAL CODES:
In Canada: must conform to CAN/CGA - B149.2 Propane Installation Code or
CAN/CGA B149.1 Natural Gas Installation.
In the U.S.A.: must conform to National Fuel Gas Code ANSI Z223.1.
WHEN DECIDING WHERE TO PLACE YOUR APPLIANCE, FOLLOW THESE MINIMUM CLEARANCE DISTANCES TO ADJACENT COMBUSTIBLE MATERIALS:
• 24 inches (61 cm) from side of unit (See Figure 2)
• 18 inches (46 cm) from back of unit (See Figure 2)
WARNING
WARNING
3/8"
VENTURI TUBE
AIR SLEEVE
VALVE OUTLETS
CASTING
Fig. 1
3
FOR YOUR OWN SAFETY:
•Only use your grill OUTDOORS in a well ventilated area -- preferably 10 feet (3m) from your residence or any outbuildings.
• Always keep the area around your grill clear of any combustible materials, gasoline, or other flammable liquids.
DO NOT operate this grill under overhead or unprotected construction.
DO NOT obstruct the flow of combustion and ventilation air to the grill.
DO NOT use in garages, sheds, breezeways, or other enclosed areas.
DO NOT store a spare L.P. (propane)
cylinder under or near your grill.
DO NOT leave your grill unattended while in operation.
DO NOT allow children to operate or play near your grill.
DO NOT use while under the influence of alcohol or drugs.
DO NOT install/use in or on recreational vehicles and/or boats
ELECTRICAL CAUTION
• If any accessory installed on this grill requires an external electrical power source, it must be electrically grounded in accordance with local laws or in the absence of local laws, with the Canadian Electrical Code CSA C22.1 or in the U.S., with the National Electrical Code ANSI-NFPA 70.
• The three-prong plug provides protection against shock hazard and should be plugged directly into a properly grounded three-prong receptacle. Do not cut or remove the grounding prong from this plug.
• Ensure all electrical supply cords and fuel supply hoses are kept well away from any
heated surfaces.
L.P. GAS CYLINDER
Gas cylinders manufactured today have mechanisms to provide worry free grilling year round: Q.C.C.1 or Type 1-Quick Connect Coupling Valve, ensure fast tank hook-ups requiring only hand tightening. The redundant valve system inhibits the flow of gas to the burner if the connection is not 100% correct. O.P.D. or Overfill Protection Device prevents accidental gas leaks caused by cylinder ‘over­pressurization’, the leading cause of cylinder gas leaks. The float in the tank will automatically stop filling at 80% capacity, leaving a 20% area for the expansion of liquid. Without this safety feature, the relief valve may open and discharge propane, creating a potential safety hazard. An O.P.D. cylinder is easily distinguished by its triangular hand wheel valve. (Figure 3)
MODEL MAY NOT BE EXACTLY AS SHOWN.
24"
(61cm)
18"
(46cm)
Fig. 2
4
O.P.D.
FLOAT
FILLING STOPS AT 80%
NEW OPD
HANDWHEEL
Fig. 3
5
1. SPECIFICATIONS
Self-contained propane gas grill systems are designed to be used only with a 20 lb (9.1 kg) propane cylinder, equipped with a Type 1 cylinder valve and incorporating an overfill protection device (O.P.D). This grill cannot be connected to an existing #510 P.O.L. type valve (ones with left-hand threads). The cylinder for your gas grill must be constructed and marked in accordance with the specifications of L.P. gas cylinders: In Canada: The National Standards of Canada CAN/CSA-B339, Cylinders, Spheres
and Tubes for Transportation of Dangerous Goods; and Commission.
In the U.S.: U.S. Department of Transportation (D.O.T.)
DO NOT CONNECT TO A PROPANE GAS CYLINDER EXCEEDING THIS CAPACITY, OR USE A CYLINDER WITH ANY OTHER TYPE OF VALVE CONNECTION DEVICE.
The Type 1 valve is recognizable by the large external thread on the outlet part of the valve. Standard existing valves do not have these exterior threads. Any attempt to connect a regulator, with other than the:
i) Mating Type 1 connector (recognized by the large black coupling nut)
THE CYLINDER MUST ALSO BE EQUIPPED WITH:
a. A shut-off valve terminating in a proper cylinder valve outlet specified in current standards:
• Canada: CAN/CGA - 1.6a - M98 - Outdoor Gas Grills - Amend. 1.
• U.S.: ANSI Z 21.58a-1998 OUTDOOR COOKING APPLIANCES. b. A listed overfilling protection device (O.P.D.). c. A safety relief valve having direct communication with the vapor space of the
cylinder. d. A collar to protect the tank shut off valve. e. An arrangement for vapor withdrawal. f. A bottom ring for mounting.
THE CYLINDER SHOULD NOT EXCEED 18 1/2" (472 MM) IN HEIGHT AND 12 1/2" (317 MM) IN DIAMETER.
SAFETY:
• Always turn off the cylinder valve tightly when your grill is not in use.
• Handle tank valves with care.
• Never connect an unregulated L.P. gas cylinder to your grill.
• Never store a spare cylinder under or near your grill when in use.
• Never subject any cylinder to excessive heat or direct sunlight.
• Always keep your in-use cylinder securely fastened in an upright position.
• Do not insert any foreign objects into the valve outlet. You may damage the back-check. A damaged back-check can be the source of a leak. Leaking propane
may result in explosion, fire, severe personal injury or death.
DO NOT fill the cylinder beyond 80% full.
WARNING
If the above instructions are not followed exactly, a fire causing death or serious injury may occur.
2. TRANSPORTATION AND STORAGE:
Although it is safe when used properly, careless handling of the propane gas cylinder could result in fire, explosion, and/or serious injury.
PROPANE GAS IS HEAVIER THAN AIR, AND WILL COLLECT IN LOW AREAS, INCREASING THE ABOVE RISKS. THEREFORE:
ALWAYS use the cylinder cap provided with your cylinder whenever the cylinder is not connected to your grill. (Figure 4)
DO NOT store in a building, garage or any other enclosed area. Store in a well-ventilated area.
DO NOT store near any gas burning apparatus or in any high-heat areas such as a closed car or trunk.
• Transport and store the cylinder in an upright position -- do not tip on its side.
• Store out of reach of children.
DO NOT smoke while transporting a cylinder in your vehicle.
FILLING:
FOR SAFETY REASONS, IF AN OPTIONAL L.P. GAS CYLINDER WAS SUPPLIED WITH YOUR GRILL, IT HAS BEEN SHIPPED EMPTY. THE CYLINDER MUST BE PURGED OF AIR AND FILLED PRIOR TO USING ON YOUR GRILL. WHEN GETTING YOUR CYLINDER FILLED:
• Allow only a qualified L.P. gas dealer to fill or repair your cylinder.
DO NOT allow the cylinder to be filled beyond 80% full.
• Make sure the L.P. gas dealer checks the cylinder for leaks after filling.
If the above instructions are not followed exactly, a fire causing death or serious injury may occur.
HOSE & REGULATOR
PROPANE GAS MODELS:
Your grill is designed to operate on L.P. (propane) gas at a pressure regulated at 11" water column(2.74 kPa). A regulator preset to this pressure is supplied with the grill and MUST be used.
This regulator is equipped with the Q.C.C. Type 1,
quick connect coupling system, which incorporates the following safety features: (Figure 5)
• It will not allow gas to flow until a positive seal has been made. (Figure 6)
• It has a thermal element that will shut off the flow of gas between 240 and 300°F (115 and150°C).
CYLINDER CAP
6
WARNING
WARNING
RETAINER STRAP
LP TANK VALVE
Fig. 4
Fig. 5
Fig. 6
REGULATOR
REGULATOR
STRAIGHT
Q.C.C.I
Q.C.C.I
Loading...
+ 14 hidden pages