Fieldpiece SRS2C User Manual

Features

• Wireless communication between the platform and remote control.

• The remote stores in the body of the platform for convenient carrying.

• Solid aluminum platform with rubber corners means your scale is rugged enough for the field.

• Diamond plate style rubber pad keeps cylinders from sliding around the platform.

• Easy synchronization between the platform and the remote.

• Highly accurate weight sensor.

• Magnetic hat on the remote allows for convenient display location and keeps your hands free.

• Zero (tare) the scale from the remote.

• Remote control remembers the last zero point, even after powering on and off (you won’t lose your calibration even if the scale turns off).

• Bright backlight allows you to read the remote display in any lighting.

• Auto-power off conserves battery life.

• Battery life for both the platform and remote control are visible at all times.

• Wireless signal strength indicator.

• The platform automatically goes into standby when the remote is turned off.

• Long battery life.

Safety

This instrument complies with the requirements of

the following:

FCC Rule Part: 15C

CE: EN300 220

C-Tick

WIRELESS REFRIGERANT SCALE: SRS2C

OPERATOR’S MANUAL

Introduction

The SRS2C is a rugged wireless scale designed specifically for weighing refrigerant cylinders. The wireless remote control is securely stored inside the back of the rugged scale platform. The remote has a bright blue backlight. The remote can be hung by the magnetic hat for easy, hands-free measuring. The platform is made of solid aluminum with rubber corners to protect against the hazards of daily use.

SRS2C Quickstart

OPERATION:

1. Turn on the remote. The platform will turn on

automatically if synchronized and in stand-by

mode.

2. Zero (tare) the scale by holding the ZERO button

on the remote for one second.

3. Press the UNITS button on the remote to select

pounds or kilograms.

4. Read weight directly on the remote’s display.

SYNCHRONIZATION:

If “no Sig” or “CH USEd” is displayed when the remote is powered on, you need to SYNC the remote to your platform.

1. Check that the platform is powered on.

2. Hold the SYNC button on the remote until search

pattern appears.

3. During the search, hold the SYNC button on the

platform until green SYNC LED blinks.

4. If the sync is successful, the SYNC LED will go

solid and a reading will be shown on the display.

PRESS FOR 1 SECOND

AUTO-OFF

SRS2

Wireless Refrigerant Scale

ZERO

SYNC

UNITS

ON/OFF

PRESS FOR 1 SECOND

Wireless Remote

Platform

Opman SRS2C v14

APO: Auto Power Off turns the wireless display off

after 30 minutes. To disable APO, hold the backlight button and then press the ON/OFF button.

Battery life remaining for remote control.

Battery life remaining for the scale platform.

Wireless signal strength between remote and platform.

Major unit reading, in pounds (Lb) or kilograms (Kg).

Minor unit reading, in ounces (oz) or grams (g).

Combine with major unit for total weight. For example: if the upper display shows 14 Lb and the lower display shows 11.50 oz, the total weight is 14 Lbs and 11.50 oz.

Tech Tips for the Field

Respect the Environment

Always use low-loss hose fittings to minimize

harmful refrigerant gases entering the atmosphere.

Hoses Affect Weight

There are two ways to handle this issue:

EASY WAY Connect the hoses to the system before zeroing the scale. Once the system is stable, log the weight displayed before disconnecting from the system.

HARD WAY Zero the scale without hoses connected. Then, connect hoses to the system, and add or recover refrigerant. Disconnect the hoses from the system and the tank. Now the display will show the weight of the added or recovered refrigerant.

G-value compensation

The Earth’s gravitational strength varies depending on your location on the Earth’s surface. This can affect the accuracy of your scale readings.

In order to get the most accurate readings possible you may want to adjust the g-value of your SRS2C.

In order to adjust the g-value of your SRS2C follow the steps below:

1. Hold the UNITS button while powering on the

SRS2C display. This will take you into the g-value

set up. “G-St” will display momentarliy followed by

your SRS2C’s current g-value.

2. Press the UNITS button to scroll through 9

default g-values and a 10th custom input. To

input a custom value press the UNITS button until

“G-St” is shown on the display. Then use the

BACKLIGHT and SYNC buttons to increase or

decrease the g-value.

3. When you have selected the appropriate g-value

for your area, press the ZERO button to exit.

* Default G-value setting.

G-Values

1.) Los Angeles

9.796*

2.) Taipei

9.790

3.) Mexico City

9.779

4.) Kolkata

9.788

5.) Rio De Janeiro

9.788

6.) Sydney

9.797

7.) Tokyo

9.798

8.) Brussels

9.811

9.) Chicago

9.803

10.) Custom input

9.---

SPECIFICATIONS

Specifications good in ambient conditions of 73°F

±9°

F (23°C ±5°C), <75% relative humidity.

Overrange: "OL" mark indication. Auto power off: 30 minutes. Operating environment: 32°F (0°C) to 122°F

(50°C) at <75% R.H.

Storage temperature: -4°F (-20°C) to 140°F

(60°C), 0 to 80% R.H. with battery removed.

Accuracy:

±0.03%rdg + 0.25oz (10g) 0 to 66lbs (0 to 30kg) ±0.05%rdg + 0.25oz (10g) 66 to 254lbs (30 to 115kg)

Resolution: 0.25 oz or 10g Temperature Coefficient: 0.1×(specified accuracy)

per °F.

Wireless Range: 33ft (10 meters) Maximum load: 254 lbs (115kg) Power: Remote: Single standard 9-volt battery,

NEDA 1604, JIS 006P, IEC 6F22. Platform: 6 x AA batteries

Battery life:

Remote: 80 hrs continuous use typical alkaline. Platform: 100 hrs continuous use typical alkaline.

Weight (platform + remote control): 7.1lbs (3.2kg)

Maintenance

Clean the exterior with clean dry cloth. Do not use liquids.

Battery replacement: Separate battery indicators for the remote and the platform are on the display.

Replace the remote’s battery with a NEDA type 1604 9V battery. The scale platform will also indicate low battery by the illumination of the LOW-BATT LED. Replace the platform batteries with 6 AA batteries.

Obtaining Service

Call Fieldpiece Instruments for warranty service or out of warranty pricing. Send check or money order for the amount quoted. Send the meter freight prepaid to Fieldpiece Instruments. Send proof of date and location of purchase for in-warranty service. The scale will be repaired or replaced, at the option of Fieldpiece, and returned via least cost transportation.

Limited Warranty

This scale is warranted against defects in material or workmanship for one year from date of purchase. Fieldpiece will replace or repair the defective unit, at its option, subject to verification of the defect.

This warranty does not apply to defects resulting from abuse, neglect, accident, unauthorized repair, alteration, or unreasonable use of the instrument.

Any implied warranties arising from the sale of a Fieldpiece product, including but not limited to implied warranties of merchantability and fitness for a particular purpose, are limited to the above. Fieldpiece shall not be liable for loss of use of the instrument or other incidental or consequential damages, expenses, or economic loss, or for any claim of such damage, expenses, or economic loss.

State laws vary. The above limitations or exclusions may not apply to you.

www.fieldpiece.com

Fieldpiece SRS2C User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual