Fhiaba FI24BWRRGO, FI24BWRLGO, FI36BDILO, FI30BDIRO, FI30BDWLGO Installation Manual
Panels Dimensions Two Bottom - Drawers
Panels can have thickness ranging between 18 mm (3/4”) and 28 mm (1-1/8“).
Door panels can have a maximum weight 23 kg (51 lbs) and drawer panels may be a maximum weight of 11kg (25
lbs)
Exceeding these weights could void your warranty for any service issues which can be attributed to overweight panels.
The hinging mechanism on Fhiaba appliances is considered to be `Zero-clearance`. The door and drawer widths specified below assume the minimum niche width is being used and a 3.5mm (1/8”) reveal is desired around the panels.
Adjust your panel dimensions accordingly to your own design criteri
Minimum reveal / gap should not be less than 1.5mm (1/16”).
a considering your niche width and your reveal.
Series
FI36
FI30
2121 (83 ½") + 25 (1")
Door/Drawer Width A
897 (35 1/4”)
747 (29 3/8”)
Door Cutout Width B
627 (24 3/4”)
477 (18 3/4”)
)
3 (
(5
135
min 200 (7
)
950 (37 )
115 (4 ½”)
)
135
(5 )
Example:
84” niche height
36” niche width
4” toe kick height
1/8” gap desired all around
337 (13 ¼” 94( 5621) ¾”)
3 ( )
min 325 (12 ¾”)
)
max 415 (16
A B
Door panel:
Width: 35-3/4”
Height: 54-3/4”
Drawer panel:
Width: 35-3/4”
Height: 84”-1/8”-54-3/4”-1/8”-4”=25”
If you want a 6” toe kick height then your bottom drawer
panel height would be 23”
Fhiaba srl
www.fhiaba.com
Loading...