Fhiaba BKI7490TST3-6i, BKI7490TST6, BKI8990TST3, BKI8990TST3-6i, BKI8990TST6 User Manual

33

www.fhiaba.com · [e-mail] · Tel [phone] · Fax [phone]

Installation Guide

EN

Index

Important Instructions

Important safety instructions

Children safety

Technical requirements

Appliance features and installation requirements

Installation niche features: Integrated

Installation niche features: Classic

Installation niche features: StandPlus

Installation niche features: X-Pro

Installation niche features: Country

Installation niche features: Brilliance-Integrated

Installation niche features: Brilliance-Classic

Preparing to install

Transport to installation site and unpacking

Electrical and Water connection

Levelling

Panels mounting

Decorative door and Bottom-Drawer panels layout

Decorative panels layout for Fridge with one Bottom-Drawer (1T/0T)

Decorative panels layout for Fridge Brilliance

Decorative panels layout for Fridge with two Bottom-Drawers (0H)

Decorative panels layout for Fridge with Glass door and one Bottom-Drawer (1T/0T)

Decorative panels layout for Fridge with Glass door Brilliance

Decorative panels layout for Fridge with Glass door and two Bottom-Drawers (0H)

Decorative panels layout for Fridge Column (0F)

Decorative panels layout for Fridge column with glass door (0F)

Panels Dimensions One Bottom - Drawer (1T/0T models)

Panels Dimensions Two Bottom - Drawers (0H models)

Panels Dimensions Column model (0F models)

Mounting the handles

Mounting panels to the door and the drawer

Installation

Built-in installation of single appliance

Built-in installation of two or more appliances

Free-standing installation two or more appliances

Completing the installation

Anti-tipping safety assembly

Mounting the handles on stainless front

Ventilation

Post installation control

Start Up

34

www.fhiaba.com · [e-mail] · Tel [phone] · Fax [phone]

Symbols used in the Guide

Important safely instruction

Children safety

If this appliance is replacing an existing appliance which

must be removed or disposed of, make sure that it does

not become a dangerous trap for children by cutting its

power supply cable and rendering it impossible to close

the door.

Use the same caution at the end of the lifespan of the

new appliance.

Note

Tips for the correct use of the

appliance

Warning

directions to prevent injury

Important

Directions to avoid appliance

damage

IMPORTANT

Dimensions in parentheses are in inches.

Weights in parentheses are in pounds.

Temperatures in parentheses are in Fahrenheit degrees.

35

www.fhiaba.com · [e-mail] · Tel [phone] · Fax [phone]

Installation Guide

EN

Appliance features and installation requirements

599 Series w: 599 mm (23 5/8”)/ h: 2050 mm (80 3/4”)/ d: 610 mm (24”)

749 Series w: 749 mm (29 1/2”)/ h: 2050 mm (80 3/4”)/ d: 610 mm (24”)

899 Series w: 899 mm (35 3/8”)/ h: 2050 mm (80 3/4”)/ d: 610 mm (24”)

599 Series w: 599 mm (23 5/8”)/ h: 2050 mm (80 3/4”))/ d: 635 mm (25”)

749 Series w: 749 mm (29 1/2”)/ h: 2050 mm (80 3/4”))/ d: 635 mm (25”)

899 Series w: 899 mm (35 3/8”)/ h: 2050 mm (80 3/4”))/ d: 635 mm (25”)

599 Series w: 599 mm (23 5/8”)/ h: 2120 mm (83 1/2”)/ d: 629 mm (24 3/4”)

749 Series w: 749 mm (29 1/2”)/ h: 2120 mm (83 1/2”)/ d: 629 mm (24 3/4”)

899 Series w: 899 mm (35 3/8”)/ h: 2120 mm (83 1/2”)/ d: 629 mm (24 3/4”)

599 Series w: 599 mm (23 5/8”)/ h: 2120 mm (84”)/ d: 635 mm (25”)

749 Series w: 749 mm (29 1/2”)/ h: 2120 mm (84”)/ d: 635 mm (25”)

899 Series w: 899 mm (35 3/8”)/ h: 2120 mm (84”)/ d: 635 mm (25”)

599 Series w: 599 mm (23 5/8”)/ h: 2050 mm (80 3/4”)/ d: 575 mm (22 5/8”)

749 Series w: 749 mm (29 1/2”)/ h: 2050 mm (80 3/4”)/ d: 575 mm (22 5/8”)

899 Series w: 899 mm (35 3/8”)/ h: 2050 mm (80 3/4”)/ d: 575 mm (22 5/8”)

599 Series w: 599 mm (23 5/8”)/ h: 2050 mm (80 3/4”))/ d: 600 mm (23 3/4”)

749 Series w: 749 mm (29 1/2”)/ h: 2050 mm (80 3/4”))/ d: 600 mm (23 3/4”)

899 Series w: 899 mm (35 3/8”)/ h: 2050 mm (80 3/4”))/ d: 600 mm (23 3/4”)

599 Series w: 650 mm (25 5/8”) / h: 2210 mm (87”)/ d: 800 mm (31 1/2”)

749 Series w: 800 mm (31 1/2”)/ h: 2210 mm (87”)/ d: 800 mm (31 1/2”)

899 Series w: 950 mm (37 3/8”) / h: 2210 mm (87”)/ d: 800 mm (31 1/2”)

599 Series w: 650 mm (25 5/8”) / h: 2260 mm (89”) / d: 800 mm (31 1/2”)

749 Series w: 800 mm (31 1/2”) / h: 2260 mm (89”) / d: 800 mm (31 1/2”)

899 Series w: 950 mm (37 3/8”) / h: 2260 mm (89”) / d: 800 mm (31 1/2”)

599 Series up to 230 kg (507 lb)

749 Series up to 275 kg (606 lb)

899 Series up to 295 kg (650 lb)

Europe Version: AC 220-240V 50 Hz / North America Version: 110V 60Hz

Europe Version: Schuko 16 A plug / North America Version: 15 A

from 0.05 MPa to 0.5 MPa (0.5 Bar - 5 Bar)

3/4” female attachment

Customized panels mounting Kit

Anti-tipping Kit (B04000200)

Lateral connecting kit (KCLIT/KCLIH)

4 mm (1/8”) allen wrench

Phillips head screwdriver

wood and percussion drill

2.5 mm (1/8”) bit for wood

8 mm (3/8”) bit for walls

17 mm (3/4”) wrench

Appliance dimensions

Integrated

Appliance dimensions

Classic

Appliance dimensions

StandPlus

Appliance dimensions

X-Pro / Country

Appliance dimensions

Brilliance-Integrated

Appliance dimensions

Brilliance-Classic

Appliance dimensions

Integrated / Classic

Appliance dimensions

StandPlus / X-Pro / Country

Weight with packaging

Voltage

Power supply cable

Potable water supply pressure

Water supply tube

Provided installation accessories

Additional equipment necessary

36

992 (39”)

S899: 1470 (57 7⁄8”)

S749: 1320 (52”)

S599: 1170 (46”)

560 (22”)

610 (24”)

S899: 899 (35 3⁄8”)

S749: 749 (29 ½”)

S599: 599 (23 5⁄8”)

10 (3⁄8”)

105°

S899: 160 (6 3⁄8”)

S749: 125 (5”)

S599: 90 (3 ½”)

610 (24”)

560 (22”)

1293 (50 7⁄8” )

474 (18 5⁄8”)

231 (9

1⁄8”

) +

25 (1”)

500 (19 ¾”)

248 (9

¾”

)

+ 25 (1”)

20 (¾”)

15 (5⁄8”)

721 (28 3⁄8”) +25 (1”)

2050 (80 ¾”) +25 (1”)

1T/0T

610 (24”)

560 (22”)

1808 (71 ¼” )

231 (9

1⁄8”

) +

25 (1”)

500 (19 ¾”)

233 (9

¼”

)

+ 25 (1”)

15 (5⁄8”)

2050 (80 ¾”) +25 (1”)

0F

2050 (80 ¾”) +25 (1”)

846 (33 ¼”) +25 (1”)

0H

610 (24”)

560 (22”)

500 (19 ¾”)

231 (9

1⁄8”

) +

25 (1”)

248 (9

¾”

)

+ 25 (1”)

15 (5⁄8”)

20 (¾”)10 (3⁄8”)

1168(46”)

330 (13”)

259 (10

¼”

)

min 2064 (81 ¼”)

A A

E W E W

140 (5 ½”) 140 (5 ½”)

100 (4”)

100 (4”)

899 900 (35 ½”)

599 600 (23 ¾”)

749 750 (29 5⁄8”)

A

E

W

2064 mm (81 1/4”)

S899: 900 mm (35 1/2”)

S749: 750 mm (29 5/8”)

S599: 600 mm (23 3/4”)

S899: 1470 mm (57 7/8”)

S749: 1320 mm (52”)

S599: 1170 mm (46”)

105°

S899: 899 mm (35 3/8”)

S749: 749 mm (29 1/2”)

S599: 599 mm (23 5/8”)

2050 mm (80 3/4”) + 25 mm (1”)

610 mm (24”)

www.fhiaba.com · [e-mail] · Tel [phone] · Fax [phone]

Installation niche features: Integrated Series

area to be left clear for the anti-tipping brackets

area to be left clear for the power supply cable

and water supply hose

Minimum Niche Height

Minimum Niche Width

Door Swing Clearance

Important: A 90° door opening is sufcient to allow

opening and full extraction of the inner drawers, even

if the appliance is installed directly adjacent to a wall.

Should an opening at 105° be desired, then the ap-

pliance should be positioned at the distance from the

wall described in gure.

area to be left clear for the anti-tipping brackets

area to be left clear for the power supply cable

and water supply hose

Minimum Niche Height

Minimum Niche Width

Door Swing Clearance

Door Opening Angle

Width

Height

Depth with door (without panel)

37

A

E

W

2064 mm (81 1/4”)

KS899: 900 mm (35 1/2”)

KS749: 750 mm (29 5/8”)

KS599: 600 mm (23 3/4”)

KS899: 1470 mm (57 7/8”)

KS749: 1320 mm (52”)

KS599: 1170 mm (46”)

105°

KS899: 899 mm (35 3/8”)

KS749: 749 mm (29 1/2”)

KS599: 599 mm (23 5/8”)

2050 mm (80 3/4”) + 25 mm (1”)

635 mm (25”)

min 2064 (81 ¼”)

A A

E W E W

140 (5 ½”) 140 (5 ½”)

100 (4”)

100 (4”)

KS899: 900 (35 ½”)

KS599: 600 (23 ¾”)

KS749: 750 (29 5⁄8”)

635 (25”)

560 (22”)

1T/0T

693 (27 ¼”)

2050 (80 ¾”) +25 (1”)

1308 (51 ½”)587 (23 1⁄8”)146 (5 ¾”) + 25(1”)

9 ( 3⁄8”)

732 (28 7⁄8”)+25 (1”)

635 (25”)

560 (22”)

0F

693 (27 ¼”)

2050 (80 ¾”) +25 (1”)

1904 (75”)

¾”) + 25(1”)

0H

635 (25”)

560 (22”)

693 (27 ¼”)

146 (5 ¾”) + 25(1”)

2050 (80 ¾”) +25 (1”)

857 (33 ¾”) +25 (1”)

1185 (46 5⁄8”)

342 (13 ½”)362 (14 ¼”)

9 ( 3⁄8”)6 ( ¼”)

KS899: 1470 (57 7⁄8”)

KS749: 1320 (52”)

KS599: 1170 (46”)

560 (22”)

635 (25”)

KS899: 899 (35 3⁄8”)

KS749: 749 (29 ½”)

KS599: 599 (23 5⁄8”)

10 (3⁄8”)

105°

75 (3”)

58 (2 ¼”)

KS899: 230 (9”)

KS749: 195 (7 ¾”)

KS599: 160 (6 ¼”)

1016 (40”)

www.fhiaba.com · [e-mail] · Tel [phone] · Fax [phone]

Installation Guide

EN

Installation niche features: Classic Series

Important: A 90° door opening is sufcient to allow

opening and full extraction of the inner drawers, even

if the appliance is installed directly adjacent to a wall.

Should an opening at 105° be desired, then the ap-

pliance should be positioned at the distance from the

wall described in gure.

area to be left clear for the anti-tipping brackets

area to be left clear for the power supply cable

and water supply hose

Minimum Niche Height

Minimum Niche Width

Door Swing Clearance

Door Opening Angle

Width

Height

Depth with door

38

A

E

W

2134 mm (84”)

MS899: 900 mm (35 1/2”)

MS749: 750 mm (29 5/8”)

MS599: 600 mm (23 3/4”)

MS899: 1470 mm (57 7/8”)

MS749: 1320 mm (52”)

MS599: 1170 mm (46”)

105°

MS899: 899 mm (35 3/8”)

MS749: 749 mm (29 1/2”)

MS599: 599 mm (23 5/8”)

2120 mm (83 1/2”) + 25 mm (1”)

629 mm (24 3/4”)

min 10

(3⁄8”)

min 50 (2”)

A A

E W E W

140 (5 ½”) 140 (5 ½”)

100 (4”)

100 (4”)

min 2134 (84”)

MS899: 900 (35 ½”)

MS599: 600 (23 ¾”)

MS749: 750 (29 5⁄8”)

560 (22”)

2120 (83 ½”) +25 (1”)

613 (24 1⁄8”)+25 (1”)

629 (24 ¾”)

615 (24 ¼”)

629 (24 ¾”)

615 (24 ¼”)

1T/0T

2120 (83 ½”) +25 (1”)

0H

666 (26 ¼”)

485 (19 1⁄8”)

1296 (50”)

195 (7 5⁄8”)

8 (3⁄8”)

8 (3⁄8”)

128 (5)

+ 25 (1”

)

128 (5)

+ 25 (1”)

195 (7 5⁄8”)

8 (3⁄8”)

8 (3⁄8”)

560 (22”)

666 (26 ¼”)

1170 (46”)

343 (13 ½”)

262 (10 ¼”)

6 ( ¼”)

749 (29 ½”) + 25 (1”)

1010 (39 ¾”)

560 (22”)

MS899: 899 (35 3⁄8”)

MS749: 749 (29 ½”)

MS599: 599 (23 5⁄8”)

10 (

3⁄8

”)

105°

629 (24 ¾”)

37 (1 ½”)

69 (2 ¾”)

MS899: 1470 (57 7⁄8”)

MS749: 1320 (52”

)

MS599: 1170 (46”

)

MS899: 230 (9”)

MS749: 195 (7 ¾”)

MS599: 160 (6 ¼”)

www.fhiaba.com · [e-mail] · Tel [phone] · Fax [phone]

Installation niche features: StandPlus Series

Important: A 90° door opening is sufcient to allow

opening and full extraction of the inner drawers, even

if the appliance is installed directly adjacent to a wall.

Should an opening at 105° be desired, then the ap-

pliance should be positioned at the distance from the

wall described in gure.

area to be left clear for the anti-tipping brackets

area to be left clear for the power supply cable

and water supply hose

Minimum Niche Height

Minimum Niche Width

Door Swing Clearance

Door Opening Angle

Width

Height

Depth with door

Important: If the units are to be installed inside a ni-

che or within an enclosed structure, it is necessary to

design a ventilation shaft at the back of the niche to

assure proper ventilation at the back of the unit.

39

min 10 (3⁄8”)

min 50 (2”)

A

E

W

2134 mm (84”)

XS899: 900 mm (35 1/2”)

XS749: 750 mm (29 5/8”)

XS599: 600 mm (23 3/4”)

XS899: 1470 mm (57 7/8”)

XS749: 1320 mm (52”)

XS599: 1170 mm (46”)

105°

XS899: 899 mm (35 3/8”)

XS749: 749 mm (29 1/2”)

XS599: 599 mm (23 5/8”)

2120 mm (83 1/2”) + 25 mm (1”)

635 mm (25 ”)

A A

E W E W

140 (5 ½”) 140 (5 ½”)

100 (4”)

100 (4”)

min 2134 (84”)

XS899: 900 (35 ½”)

XS599: 600 (23 ¾”)

XS749: 750 (29 5⁄8”)

560 (22”)

2120 (83 ½”) +25 (1”)

613 (24 1⁄8”)+25 (1”)

2120 (83 ½”) +25 (1”)

635 (25”)

693 (27 ¼”)

516 (20 3⁄8”)

1296 (50”)

195 (7 5⁄8”)

8 (3⁄8”)

8 (3⁄8”)

195 (7 5⁄8”)

8 (3⁄8”)

8 (3⁄8”)

749 (29 ½”) + 25 (1”

)

1170 (46”)

343 (13 ½”)

293

(11 ½”)

6 ( ¼”)

1T/0T

0H

97 (3 7⁄8”)

+ 25 (1”)

97 (3 7⁄8”)

+ 25 (1”)

1016 (40”)

XS899: 1470 (57 7⁄8”)

XS749: 1320 (52”)

XS599: 1170 (46”)

560 (22”)

75 (3”)

XS899: 899 (35 5⁄8”)

XS749: 749 (29 ½”)

XS599: 599 (23 5⁄8”)

10 (3⁄8”)58 (2 ¼”)

105°

635 (25”)

XS899: 230 (9”)

XS749: 195 (7 ¾”)

XS599: 160 (6 ¼”)

www.fhiaba.com · [e-mail] · Tel [phone] · Fax [phone]

Installation Guide

EN

Installation niche features: X-Pro Series

Important: A 90° door opening is sufcient to allow

opening and full extraction of the inner drawers, even

if the appliance is installed directly adjacent to a wall.

Should an opening at 105° be desired, then the ap-

pliance should be positioned at the distance from the

wall described in gure.

area to be left clear for the anti-tipping brackets

area to be left clear for the power supply cable

and water supply hose

Minimum Niche Height

Minimum Niche Width

Door Swing Clearance

Door Opening Angle

Width

Height

Depth with door

Important: If the units are to be installed inside a ni-

che or within an enclosed structure, it is necessary to

design a ventilation shaft at the back of the niche to

assure proper ventilation at the back of the unit.

40

min 10 (3⁄8”)

min 50 (2”)

A

E

W

2134 mm (84”)

AS899: 900 mm (35 1/2”)

AS749: 750 mm (29 5/8”)

AS599: 600 mm (23 3/4”)

AS899: 1470 mm (57 7/8”)

AS749: 1320 mm (52”)

AS599: 1170 mm (46”)

105°

AS899: 887 mm (35")

AS749: 737 mm (29")

AS599: 587 mm (23 1/8")

2120 mm (83 1/2”) + 25 mm (1”)

635 mm (25 ”)

A A

E W E W

140 (5 ½”) 140 (5 ½”)

100 (4”)

100 (4”)

min 2134 (84”)

AS899: 900 (35 ½”)

AS599: 600 (23 ¾”)

AS749: 750 (29 5⁄8”)

560 (22”)

2120 (83 ½”) +25 (1”)

613 (24 1⁄8”)+25 (1”)

635 (25”)

695 (27 ¼”)

485 (19 1⁄8”)

1296 (50”)

195 (7 5⁄8”)

8 (3⁄8”)

8 (3⁄8”)

1T/0T

128 (5)

+ 25 (1”)

1016 (40”)

AS899: 1470 (57 7⁄8”)

AS749: 1320 (52”)

AS599: 1170 (46”)

560 (22”)

75 (3”)

AS899: 887 (35”)

AS749: 737 (29”)

AS599: 587 (23 1⁄8”)

10 (3⁄8”)60 (2 ¼”)

105°

635 (25”)

AS899: 230 (9”)

AS749: 195 (7 ¾”)

AS599: 160 (6 ¼”)

www.fhiaba.com · [e-mail] · Tel [phone] · Fax [phone]

Installation niche features: Country Series

Important: A 90° door opening is sufcient to allow

opening and full extraction of the inner drawers, even

if the appliance is installed directly adjacent to a wall.

Should an opening at 105° be desired, then the ap-

pliance should be positioned at the distance from the

wall described in gure.

area to be left clear for the anti-tipping brackets

area to be left clear for the power supply cable

and water supply hose

Minimum Niche Height

Minimum Niche Width

Door Swing Clearance

Door Opening Angle

Width

Height

Depth with door

41

A A

E W E W

140 (5 ½”) 140 (5 ½”)

100 (4”)

100 (4”)

min 2064 (81 ¼”)

BI899: 900 (35 ½”)

BI599: 600 (23 ¾”)

BI749: 750 (29 5⁄8”)

575 (22 5⁄8”)

525 (20 5⁄8”)

1293 (50 7⁄8” )

474 (18 5⁄8”)

231 (9

1⁄8”

) +

25 (1”)

465 (18 3⁄8”)

248 (9

¾”

)

+ 25 (1”)

20 (¾”)

15 (5⁄8”)

721 (28 3⁄8”) +25 (1”)

2050 (80 ¾”) +25 (1”)

0T

947 (37 ¼”)

BI899: 1435 (56 ½”)

BI749: 1285 (50 5⁄8”)

BI599: 1135 (44 ¾”)

525 (20 5⁄8”)

575 (22 5⁄8”)

BI899: 899 (35 3⁄8”)

BI749: 749 (29 ½”)

BI599: 599 (23 5⁄8”)

10 (

3⁄8

”)

105°

BI899: 160 (6 3⁄8”)

BI749: 125 (5”)

BI599: 90 (3 ½”)

A

E

W

2064 mm (81 1/4”)

BI899: 900 mm (35 1/2”)

BI749: 750 mm (29 5/8”)

BI599: 600 mm (23 3/4”)

BI899: 1435 mm (56 1/2” in)

BI749: 1285 mm (50 5/8” in)

BI599: 1135 mm (44 3/4” in)

105°

BI899: 899 mm (35 3/8”)

BI749: 749 mm (29 1/2”)

BI599: 599 mm (23 5/8”)

2050 mm (80 3/4”) + 25 mm (1”)

575 mm (22 5/8” in)

www.fhiaba.com · [e-mail] · Tel [phone] · Fax [phone]

Installation Guide

EN

Installation niche features: Brilliance-Integrated Series

Important: A 90° door opening is sufcient to allow

opening and full extraction of the inner drawers, even

if the appliance is installed directly adjacent to a wall.

Should an opening at 105° be desired, then the ap-

pliance should be positioned at the distance from the

wall described in gure.

area to be left clear for the anti-tipping brackets

area to be left clear for the power supply cable

and water supply hose

Minimum Niche Height

Minimum Niche Width

Door Swing Clearance

Door Opening Angle

Width

Height

Depth with door (without panel)

42

A

E

W

2064 mm (81 1/4”)

BKI899: 900 mm (35 1/2”)

BKI749: 750 mm (29 5/8”)

BKI599: 600 mm (23 3/4”)

BKI899: 1435 mm (56 1/2” in)

BKI749: 1285 mm (50 5/8” in)

BKI599: 1135 mm (44 3/4” in)

105°

BKI899: 899 mm (35 3/8”)

BKI749: 749 mm (29 1/2”)

BKI599: 599 mm (23 5/8”)

2050 mm (80 3/4”) + 25 mm (1”)

600 mm (23 3/4” in)

A A

E W E W

140 (5 ½”) 140 (5 ½”)

100 (4”)

100 (4”)

min 2064 (81

¼”)

BKI899: 900 (35 ½”)

BKI599: 600 (23 ¾”)

BKI749: 750 (29 5⁄8”)

600 (23 ¾”)

525 (20 5⁄8”)

0T

693 (27 ¼”)

2050 (80 ¾”) +25 (1”)

1308 (51 ½”)587 (23 1⁄8”)

146 (5

¾”) + 25(1”)

9 ( 3⁄8”)

732 (28 7⁄8”)+25 (1”)

BKI899: 1435 (56 ½”)

BKI749: 1285 (50

5⁄8”)

BKI599: 1135 (44

¾”)

525 (20 5⁄8”)

600 (23 ¾”)

BKI899: 899 (35 3⁄8”)

BKI749: 749 (29 ½”)

BKI599: 599 (23 5⁄8”)

10 (3⁄8”)

105°

75 (3”)

58 (2 ¼”)

BKI899: 230 (9”)

BKI749: 195 (7 ¾”)

BKI599: 160 (6 ¼”)

www.fhiaba.com · [e-mail] · Tel [phone] · Fax [phone]

Installation niche features: Brilliance-Classic Series

Important: A 90° door opening is sufcient to allow

opening and full extraction of the inner drawers, even

if the appliance is installed directly adjacent to a wall.

Should an opening at 105° be desired, then the ap-

pliance should be positioned at the distance from the

wall described in gure.

area to be left clear for the anti-tipping brackets

area to be left clear for the power supply cable

and water supply hose

Minimum Niche Height

Minimum Niche Width

Door Swing Clearance

Door Opening Angle

Width

Height

Depth with door