Festool PRECISIO CS 50 BROCHURE

Page 1
Light in weight. Powerful in action.
PRECISIO
®
CS 50 – the lightest
bench trimming saw in the world
Tools for the toughest demands
Page 2
Full power perfectly under control. The
PRECISIO
®
CS 50 – exemplary flexibility and handling.
Adaptable.
The angle stop can be rotated through 180° and used on any side without the slightest difficulty and with no awkward realignment: this means the CS 50 can be switched from cross-cutting to rip cutting with a simple hand movement.
Trimmed in a single movement.
With the CS 50, you make real progress: even at 45°. You can cross-cut 200 mm wide panels with a single movement.
Light and simple.
Light weight and integrated foldaway legs: the CS 50 is incredibly easy to transport and is set up in an instant. You can choose from two working heights.
Speedy changes without tools.
FastFix saw blade changes from Festool enable work perfectly geared to the material. The correct blade is fitted in a trice – without the need for any tools.
Low-dust work.
Clean power through dual application. With the twin extraction above and below the work surface, you keep your workplace clean and at the same time protect your health.
Handle with ease.
Work ergonomically thanks to the new multifunction handle: whether you want to turn the machine on or off, adjust the speed or use the pull through operation – all these operating functions can be found in one place.
Angles easily set.
You can even saw angled cuts with the CS 50 precisely and comfortably.
Sawing without splintering.
Perfectly cut edges on both sides of the workpiece. The splinter­guard moves with the saw to ensure a perfect finish.
Always Available to Hand.
Always to hand and at the same time protected from dust. The saw blade depot not only holds up to 4 high-quality Festool saw blades, you also have the correct blade on hand for all materials.
3)
2 3
Wo
rldwide
innovation!
The Precisio family from Festool has grown with the addition of the new CS 50. With this extremely light weight bench trimming saw, you are now perfectly equipped to carry out a wide variety of fitting and installation jobs. Equipped with a large number of new technical solutions, the CS 50 makes work not only easier but also faster and better.
Extremely light weight high precision and versatility – the CS 50 is the perfect combination for sawing suited to the material and high-quality results of work.
1)
For semi-stationary sawing.
2)
Without angle stop and accessories.
3)
Available as accessory.
304 mm4
Winner of the iF Product Design Award 2004
Only 17.4 kg!
2)
1)
The
PRECISIO
®
CS 50 bench trimming saw
All the benefits at a glance
Page 3
Effortless removal of the bench plate by means of integrated pressure springs.
1
2
3
4
Festool
The direct way
Festool saw blade skill
Specially geared to your needs
Time for a change: the optimised blade for every application.
The system is the advantage.
4 5
We are setting new standards. With the new tool-free saw blade change, Festool offers a worldwide innovation. The interlocking saw blade holder and quick-locking flange enable you to change the saw blade entirely without tools in record time. Even the spindle stop locks into place automatically. Here, Festool provides you with a new quality of working comfort, supporting you in your day-to-day work.
The interlocking saw blade catch means there is no unnecessary slack: the power is transferred perfectly onto the saw blade as it draws effortlessly through the material.
Retractable rotary knob for releasing the quick-locking flange.
Comfortable access to the saw: the retaining flap is unlocked using the rotary knob; the spindle stop locks into place automatically.
The saw blade can be easily lifted from the holder and replaced.
Panther circular saw blade
Universal circular saw blade
)
Fine-tooth circular saw blade
Laminate/mineral material circular saw blade
Aluminium/plastic circular saw blade
Festool – decades of experience in sawing. Hardly any other manu­facturer is involved so intensively in the development and produc­tion of high-quality hand circular and assembly saws. But that’s not enough for us. In line with the system concept, Festool offers a whole range of high-quality saw blades.
Every Festool saw blade is manufactured in line with the demands of our customers. This also applies to the saw blades of the CS 50. They have been specially developed and rigorously checked. The
high-quality steel blade body and the finest grain carbide­tipped saw teeth ensure high quality, as does the computerised production process. This produces saw blades with the best pos-
sible features: high cutting quality, long service life, good sharpen­ing properties, optimised chip guidance, as well as low-vibration and low running noise.
Festool provides you with solutions geared to the material you work on. Each of the five saw blade types for the CS50 has a specific range of applications. Used in this way, the saw blades ensure optimal work results – when you take into account the quality of the saw cut, operating comfort and service life (sawing time up to sharpening). You save time and sharpening costs.
Changing is worth it! The professional tradesman knows that good quality tools make work considerably easier and saves money.
For rapid sawing with low application of power, especially in the case of rip cuts in solid wood. This power saving is achieved using the special cutting angle. Suitable for hard and soft woods.
The all-rounder for processing all woods and wooden materials (e.g. chip board) as well as building panels and soft plastics.
The fine-cut blade achieves clean cross cuts free of splinters in solid wood as well as in laminated or veneered materials.
Special saw blade for laminated panels and mineral materials. Thanks to special fine-grain carbide, this saw blade is ideal for these materials, achieving a significantly longer service life.
For aluminium profiles and plates as well as hard and reinforced plastics.
Tool-free saw blade changing thanks to interlocking saw blade catch and quick-locking flange.
Cutting width: 2.6 mm Chip angle: 28° Tooth shape: Panther cross-cut tooth Number of teeth: 16 Type: HW 190 x 2.6 FF PW 16 Order no.: 492 049
Cutting width: 2.6 mm Chip angle: 10° Tooth shape: cross-cut tooth Number of teeth: 32 Type: HW 190 x 2.6 FF W 32 Order no.: 492 048
Cutting width: 2.6 mm Chip angle: -5° Tooth shape: trapezoid flat tooth Number of teeth: 58 Type: HW 190 x 2.6 FF TF 58 Order no.: 492 051
1)
Included in the scope of delivery.
Cutting width: 2.4 mm Chip angle: 8° Tooth shape: cross-cut tooth with unevenly
pitched teeth Number of teeth: 48 Type: HW 190 x 2.4 FF W 48 Order no.: 492 050
Cutting width: 2.6 mm Chip angle: 4° tooth shape: trapezoid flat tooth Number of teeth: 54 Type: HW 190 x 2.6 FF TF 54 Order no.: 492 052
Page 4
The
PRECISIO
®
CS 50 bench trimming saw
In detail and in action
Weight Handling
The first time you pick up the new CS50 you will feel one ad­vantage: its very low weight of 17.4 kg and the compact design make the Precisio CS 50 mobile for any application.
The CS 50 may be light, but it is also very sturdy: the special material, combined with the honeycomb construction of the supports and struts, ensures minimum weight and high stability.
Never trip up again: the practical cable holder and foldaway legs of the CS 50 make it possible, as the legs are integrated into the machine. The CS 50 can be set up and ready for work in an instant. Depending on requirements, you always have a choice of two working heights.
Functions
Drawing mechanism, switching to continuous or brief operation, instantly switching off or speed adjustment – the multifunction handle combines all the operating elements in one easy to use handle.
This convenient control of the machine’s functions is made possi­ble by the use of digital electronics. All of the operating func- tions can be controlled centrally.
For example, you can approach the scribe mark accurate to one millimetre, switch on, saw, switch off. And you’re done. This provides safety with the highest operating comfort.
Save on a second device: as a bench trimming saw, the CS 50 combines two types of saw, enabling cross and rip cuts with­out requiring conversion.
The angle stop, which can be turned through 180°, provides you with an enormous variety of applications. On the one hand, it enables rapid changes from cross to rip cuts simply by turning it down, without time-consuming conversions. On the other hand, locking points enable highly accurate angle settings within the shortest possible time.
Always there. Everything in one hand. Used practically everywhere.
Simply fold out: a firm stance by means of clamping without slack.
Integrated cable holder for safety and convenience during transport.
Cross-cutting up to 294 mm.
Problem-free switching from rip cuts to cross-cutting.
Cross-cut (trim) 200 mm panels at 45˚ in one movement.
Locking button
6 7
Making things easy for you:
PRECISIO
®
CS 50
for more comfort during work.
Speed preselection
’On’ switch
’Instant off’
Angle stop that can be used all around.Secure on the floor: the legs can be
folded away safely and easily.
Precision
On the CS 50, angle and size settings can be found in one place. The ergonomic arrangement of the operating elements and clearly legible design of the scales, mean you always have an overview even during complicated sawing work.
All the scales of the CS 50 can be adjusted. This enables exact setting of cutting angles as well as saw blade thicknesses.
Simple precision is provided by the spacer wedge that can be lowered: simply press it downwards and the CS 50 is equipped for all covered cuts – without any complicated setup operations.
Turn, swivel, angled cut.
Practical: spacer wedge can be lowered.
Angled cuts up to 47° – precisely adjusted.
Scales can be adjusted and set to the saw blade thickness.
Splinterguard moves with the saw for splinter-free cuts.
Page 5
Durability
Reliability in use and long service life – ensured on the CS 50 by the intelligent, programmed digital electronics and the well-conceived construction of the device, using high-quality materials such as magnesium.
The motor, saw blade and workpiece are specially protected on the CS 50 by the digital electronics. They automatically regulate the motor speed and supply additional power when the load rises. At the same time, overheating of the motor is prevented and peaks in current are suppressed. The machine start-up is particularly gentle. The digital electronics also ensure rapid deceleration of the saw blade by means of the quick-acting safety brake.
The gains achieved on the CS 50 with regard to its lightness have not impaired safety. The CS 50 is particularly resilient as a device for mobile use: the honeycomb design of the supports ensures stability and reduces the mass at the same time. All moving parts are designed for continuous loads even when used for heavy-duty tasks.
As a particularly light and precise bench trimming saw, the CS 50 is perfectly suited to versatile, mobile use in fitting and installa­tion. However, it can do even more: with the matching system accessories, it is quickly and easily transformed into a complete sawing station.
With the right accessories, cross-cuts up to
830 mm
in length are no problem, either.
Well-conceived and reliable.
The
PRECISIO
®
CS 50 bench trimming saw
In detail and in action
8 9
The honeycomb reinforcement is extremely durable.
Mobile or stationary? That’s up to you.
Sliding table
With an extended displacement path, it enables cross-cutting up to 830 mm in length.
Table widener
The widened support area for longer workpieces permits parallel cuts up to 610 mm.
Longitudinal stop
The longitudinal stop has a fine adjustment and the additional clamp at the back prevents the stop from shifting its position.
Trimming stop
The retractable stop with measuring tape and stop tabs provides support and additional precision.
Saw blade depot
Holds up to 4 saw blades, always to hand, protecting them against dirt and damage.
Support
The support can be pushed in fully and used on both sides to brace the workpieces during cross-cutting.
Bench extension
Engaged at the end of the bench, this provides addi­tional support for workpieces during rip cuts.
Variable speed adjustment with digital electronics.
Economic efficiency
More economical in use, superior handling, and low saw blade wear: the CS 50 bench trimming saw is the perfect device for rip and cross cuts – without annoying conversions.
With the bench trimming saw, you always saw with the best possible plunge angle. This is gentler on the saw blade, which means that in comparison with circular cross-cut saws it remains usable up to eleven times longer. The sawing principle
for bench trimming saws also means that the cutting
forces are up
to four times lower than for circular cross-cut saws. These results were determined by the Institute for Machine Tools at the University of Stuttgart.
Source: bm-online 08/2002 “Ablängen von Paneelen: Zugsäge hat die Nase vorn” (“Cutting panels to length: trimming saw leads by a nose”)
So that you can make the best cut.
Comparison of service life of saw blades (laminated panels).
Optimised, even approach angle.
Unfavourable angle for plunge-cutting.
Number of cuts per saw blade
Competitor 1
Competitor 2
Festool
Roller bracket
Stabilises long workpieces for longitudinal and cross cuts.
Angle stop
You can swivel it through 180° and use it as a cross or longitudinal stop at any position.
Page 6
CS 50 EB Floor
Version
Festool
The direct way
Scope of delivery: HW saw blade Z 32, angle stop, 3 splinterguards, digital MMC electronics, workpiece holder, service tool, in box
CS 50 EB Floor 561 208
Ideal for floor specialists.
• Only 17.4kg.
1)
•Trim 200 mm wide panels at 45° in a single movement.
CS 50 EB Set
Everything for demanding applications.
CS 50 EB
Perfectly equipped for fitting and installation jobs.
•Equipped with foldaway legs and extraction set, it can be
used without the slightest difficulty on building sites and in the workshop.
•Sturdy but light, it can withstand even heavy-duty use.
The
PRECISIO
®
CS 50 bench trimming saw
Data and facts
Sliding table for CS 50
simple and fast to fit and remove; conven­ient sliding table; two securing positions; max. cutting width for cross-cutting: 830 mm
CS 50 ST, order no. 492 100
Table lengthener for CS 50
simple to fit; folds away, 400 mm longer support surface; to support long work­pieces for sawing rip cuts
CS 50 VL, order no. 492 092
Table widener for CS 50
adjustable scale; simple and fast to fit and remove; safe and precise sawing to width; max. cutting width for rip cut: 610 mm
CS 50 VB, order no. 492 090
Longitudinal stop for CS 50
with fine adjustment and clamping on opposite side; can be operated from front; with folding stop profile for precise and safe rip cuts
CS 50 LA, order no. 492 095
Support for CS 50
The support can be pushed in fully and used on both sides to brace the workpieces during cross-cutting.
CS 50 AF, order no. 492 242
Mitre guide for CS 50, CS 70
for use on the CS 50 EB and CS 70 EB; retractable, with support, measuring tape and stop tabs Length: 1200 – 2050 mm
CS 70 KA, order no. 488 063
Angle stop for CS 50, CS 70
angle stop can be swivelled through 180°, with locking points; can be used from all sides; for work with 2 stops
CS 70 WA, order no. 488 451
Stop tabs for CS 50, CS 70
for holding workpieces at the mitre guide CS 70 KA and basic KA 100/200
CS 70 AR, order no. 488 560
Stop tabs for CS 50, CS 70
for holding workpieces at the angle stop CS 50 WA and CS 70 WA and basic WRA 500
CS 70 WA-AR, order no. 491 712
Splinterguard for CS 50
for low breakout cutting edges on both sides for Precisio CS 50 Package content: 10
CS 50 SP/10, order no. 492 241
Foldaway legs for CS 50
saw can be set up and taken down in seconds; two working heights
CS 50 KB, order no. 492 245
System accessories
Festool bench trimming saws
Description and application
10
11
Version Order no.
Scope of delivery: HW saw blade Z 32, angle stop, foldaway legs, 3 x splinterguard, digital MMC electronics, extraction set, workpiece holder, service tool, in box
CS 50 EB 561 194
Version Order no.
Scope of delivery: HW saw blade Z 32, angle stop, longitudinal stop, sliding table, table lengthener, table widener, foldaway legs, 3 x splinterguard, digital MMC electronics, extraction set, workpiece holder, service tool, in box
CS 50 EB Set 561 202
Precision – a fitting name for the Festool bench trimming saws. The Precisio CS 50 is the perfect complement to the proven CS 70. The performance of the powerful CS 70 used for large­format workpieces is matched by the CS 50 for mobile use. And it is just as effective.
The same applies to both: perfect cutting quality in one move­ment, optimised handling with the highest level of safety and outstanding durability. In a word: Precisio.
Backed by a system: the
PRECISIO
®
bench trimming saws.
Technical data
Rated power 1,200 W Speed of saw blade 2,000 – 4,200 rpm Cutting depth at 90˚ 0 – 52 mm Cutting depth at 45˚ 0 – 37 mm Draw distance 304 mm Trimming width at 16 mm thickness 294 mm Rip cuts 223 mm Saw blade diameter 190 mm Inclined position 0(-2)˚ up to 45(47)˚ Connection for dust extraction D 27/36 mm Weight CS 50 EB Floor
1)
17.4 kg
Weight CS 50 EB
1)
19.5 kg
Weight of angle stop 1.7 kg
Description and application
• High-quality sawing station that you can also use to deal with large workpieces and difficult work without the slightest problem.
• Simple to assemble, reducing equipping times on site and in the workshop.
• Comprehensive accessories for a wide range of applications.
Extraction set for CS 50, CS 70
included in the scope of delivery of the Precisio CS 50 EB; consisting of: suction hose D 27 x 2.0 m, suction hose D 36 x 1.0m, Y-connection pieces
CS 70 AB, order no. 488 292
Roller bracket for CS 50, CS 70
for fixing long workpieces for rip and cross cuts
CS 70 RB, order no. 488 711
Saw blade depot for CS 50
In order to retain the optimised properties of the saw blades for as long as possible, there is now the practical saw blade depot. The depot ensures not only the necessary protection against dirt. It also means that the saw blades are always where they should be – by the saw, and quickly to hand when needed. Scope of delivery: saw blade depot without blades.
CS 50 SGA, order no. 492 228
The range of saw blades for the CS 50 can be found on page 5.
10
1)
Without angle stop and accessories.
CS 70
CS 50
System accessories
NEW!
Order no.
Page 7
Minden Industrial Ltd. Saxham Business Park Saxham Bury St. Edmunds Suffolk IP28 6RX England
Telephone: 01284 760791 Facsimile: 01284 702156
E-mail: info@minden-ind.co.uk http://www.minden-ind.co.uk
www.festool.co.uk
www.festool.co.uk
Online product catalogue
Service
News and special offers
Dealer search
Test reports
Example applications
3D animation
Your link to more information...
On our current Festool site you can, for example, find information about
• the complete product range
• new products
• countless product animations
• many helpful application examples, plus
• our comprehensive service offer.
And all of this at your leisure.
Subject to alterations and errors. All illustrations are non-binding. Created for TTS Tooltechnic Systems AG & Co. KG, D-Wendlingen, 3/2004
Regardless of how long the warranty period is set by law, with Festool you’re guaranteed to be better off. Festool grants a 1 year guarantee from the date of pur­chase, as long as the tool has been used correctly. This guarantee is automatically
extended by a further two years provided that the guarantee form that is enclosed with every new tool, is filled in and returned to Minden Industrial Ltd within 30 days from the date of purchase.
Loading...