Ferm FSD-960K I, FSD-1800K I User Manual
Ferm BV • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.com 0303-06
Ferm Cordless Drills
FSD-960K I
FSD-1800K I
USER’S MANUAL
Art.nr. 718810
Screwfix art.nr: 13882 – 960
Art.nr. 718870
Screwfix art.nr: 18424 – 1800
UK Subject to change
DocumentRef:
FSD-960K I/13882/PMR2/Issue 1/Mar02
FSD-1800K I/18424/PMR2/Issue 1/Mar02
Copyright ©
These instructions are the sole property of Ferm-Omega Tools and may not be reproduced
Ferm 7
FERM FSD-960K I AND 1800K I
USERS MANUAL
TECHNICAL SPECIFICATIONS
PACKAGE CONTENTS
1 Cordless drill
1 Battery
1 Charger
1 Adapter
1 Case
1 Instruction manual
1 Guarantee card
1 Safety instructions
SAFETY INSTRUCTIONS
The following symbols are used in these instructions for
use:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of the
instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
Ferm products are manufactured to high quality standards they are safe and fit for purpose at time of sale, but
all tools can be dangerous if the correct precautions are
not taken. Always follow these instructions, do not carry
out the operation until you are sure you can do so in
safety. Remember consider the work environment for
safe operation as well as safety for tool use.
Warning! When using electric tools, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and personal injury. Read all
these instructions before attempting to operate this product.
Save these instructions for future reference.
PERSONAL SAFETY
Use Personal Protection Safety Equipment
Protect eyes with safety glasses or goggles note: the use
of safety protective eyewear without the CE mark can
lead to serious injury if the glass breaks. A suitable dust
mask should be worn if cutting drilling or sanding is dusty,
in particular chipboard or MDF. Approved safety footwear and headgear should worn as appropriate, for
example on building works or when heavy weights are
involved.
Dress properly
Do not wear loose clothing or jewellery. It can get caught
in moving parts. Non-skid footwear is recommended
when working out doors. Wear protective hair covering
to contain long hair.
Stay alert
Watch what you are doing Use common sense. Do not
operate tools when tired or after taking alcohol or prescription/ non-prescription drugs.
OPERATIONAL SAFETY
Concentrate
Routine and repetition can lead to mistakes. Remember
that a slight lack of concentration can result in serious
injuries in a split second.
Keep work area clean
Cluttered areas and benches invite injuries.
Consider the work environment
Do not expose power tools to rain or use them in damp
or wet locations. Keep work area well lit. Do not use
power tools in the presence of flammable liquids,
vapours or gases.
Guard against electric shock
This unit contains dangerous voltages. Use a RCD (residual current device) to provide protection against electrical shock. Prevent body contact with grounded surfaces (e.g. pipes, radiator, ranges or refrigerators).
Keep children and pets away
Do not let children or pets come into contact with the
tool, extension cable or work area.
Do not force the tool
It will work better and safer at the rate for which it was
intended.
Use the right tool
Do not force small tools or attachments to do the job of a
heavy-duty tool. Do not use tools for purposes for which
they were not intended; for example do not use a circular
saw for cutting trees or logs.
Voltage (718810) | 9.6 V
—
---
Voltage (718870) | 18 V
—
--Voltage battery charger | 230 V~
Frequency battery charger | 50 Hz
Capacity battery | 1.2 Ah (NiCd)
Charging time | 3 - 5h
Number of drilling speeds | 1
No load Speed (718810) | 0 - 550/min
No load Speed (718870) | 0 - 900/min
Weight (incl. battery) | 1.8 kg
LpaSound pressure level | 75 dB(A)
Vibration | <2.5 m/s
2
2 Ferm
EXPLODED VIEW
Loading...