Fender Hot-Rod-Deville-410-Combo-SM, Hot-Rod-Deville-212-Combo-SM Service Manual
HOT ROD DEVILLE
410 COMBO
212 COMBO
SERVICE MANUAL
CONTENTS:
Specifications
Parts lists:
PCB assembly
Chassis assembly
Cabinet assembly
Footswitch assembly
Miscellaneous
Schematics/diagrams
Fender Musical Instruments Corp. 7975 North Hayden Road Scottsdale, AZ 85258
Notices
HOT ROD DEVILLE
(This is the model name for warranty claims)
SERVICE MANUAL
SEPTEMBER 1996
IMPORTANT NOTICE:
The information contained herein is CONFIDENTIAL and PROPRIETARY to Fender Musical Instruments Corp. It is
disclosed solely for use by qualified technicians for purposes of equipment maintenance and service. It is not to be
disclosed to others without the expressed permission of Fender Musical Instruments Co. All specifications subject to
change without notice.
For warranty repair service, only Fender specified part numbers are to be used. It is recommended they also be used
for post-warranty maintenance and repair.
Parts marked with an asterisk (
and SAFETY requirements. DO NOT USE A SUBSTITUTE!
A coded naming convention is used in the description of certain parts. The codes and what they mean are as follows:
CAPACITOR CODES HARDWARE CODES
CAP AE = Aluminum Electrolytic BLX = Black Oxide
CAP CA = Ceramic Axial CR = Chrome Plated
CAP CD = Ceramic Disk HWH = Hex Washer Head
CAP MPF = Metalized Polyester Film M = Machine Screw
CAP MY = Mylar NI = Nickel Plated
CAP PFF = Polyester Film/Foil OHP = Oval Head Phillips
RESISTOR CODES
RES CC = Carbon Comp SMA = Sheet Metal "A" Point
RES CF = Carbon Film SMB = Sheet Metal "B" Point
RES FP = Flame Proof SS = Stainless Steel
RES MF = Metal Film TF = Thread Forming
RES WW = Wire Wound ZI = Zinc Plated
*
) indicate the required use of that specific part. This is necessary for RELIABILITY
PB = Particle Board
PHP = Pan Head Phillips
PHPS = Pan Head Phillips Sems
HOT ROD DEVILLE
SPECIFICATIONS
Product Release No.: PR 247 (This is not a model number)
Hot Rod Deville Hot Rod Deville 212
Input Impedance: Input 1: 1M ohm Input 1: 1M ohm
Input 2: 136kΩ Input 2: 136kΩ
Power output: 60 Watts RMS into 60 Watts RMS into
8 or 4Ω @ 5% THD 4 or 2Ω @ 5% THD
Preamp Out
Output Impedance: 1.5kΩ max 1.5kΩ max
Power Amp In
Sensitivity: 230mV for clipping 230mV for clipping
Power Amp in
Input Impedance: 54kΩ 54kΩ
Speaker Complement: Four 8 ohm Fender Model Two 8 ohm Fender Re-issue
V1030 Special Design 10” “Gold Label” 12” speakers
Speakers (P/N 048832) (P/N 037617)
DImensions:
Height: 23.5” (59.7 cm) 21” (53.3 cm)
Width: 23.5" (59.7 cm) 24.25” (61.6 cm)
Depth: 10.75" (27.3 cm) 10.75” (27.3 cm)
Weight: 50 lbs. (22.7 kg) 53.5 lbs. (24.2kg)
Product specifications are subject to change without notice
PARTS LIST
PRINTED CIRCUIT BOARD ASSEMBLY
QTY PART # DESCRIPTION REFERENCE DESIGNATION
1 050388003 PCB ASSY H/R DEVILLE 212 STUFFED
3 028104 BUTTON PUSH SWITCH BLACK @S1,2,3
1 050688 CABLE JMPR 2 CKT .156 ROUND
3 050687 CABLE JMPR 6 CKT .156 ROUND
1 041311 CABLE REVERB @U2
4 038689001 CAP AE AX .47uF 100V C12,16,19,20
1 038690001 CAP AE AX 1.0uF 100V C8
5 009512 CAP AE AX 22uF 25V 20% C9,14,21,49,50
2 036954 CAP AE RDL 22uF 63V 20% C38,45
2 024819 CAP AE AX 22uF 500V C35,36
1 038693001 CAP AE AX 47uF 16V C1
2 024820 CAP AE AX 47uF 350V C33,34
4 031040 CAP AE RDL 100uF 100V 20% C37,39,42,43
2 028953 CA[ AE AX 100uF 350V 20% C31,32
Loading...