Fellowes ZION01 User Manual

CUSTOMER SERVICE & SUPPORT

www.fellowes.com

U.S.: 1-800-955-0959
Canada: 1-800-665-4339
Mexico: 001-800-514-9057

Declaration of Conformity

Fellowes, Inc.

Unit 2 Ontario Drive, New Rossington, Doncaster, DN11 0BF, England declares that the product model Rapido Wireless Charging
Pod conforms with the requirements of the Restriction of Hazardous Substances Directive (2011/65/EU & 2015/863/EU), the
Radio Equipment Directive (2014/53/EU), the WEEE directive (2012/19/EU), and below harmonized European EN Standards.

Safety: EN 62368-1:2014+A11:2017

EMC: EN 55032:2015
EN 55035:2017
EN 61000-3-2:2014
EN 61000-3-3:2013

Rapido Wireless Charging Pod

RF: Draft ETSI EN 301 489-1 V2.2.1 (2019-03)
ETSI EN 301 489-3 V2.1.1 (2019-03)
ETSI EN 303 417 V1.1.1 (2017-09)
EN 62311:2008

Year Affixed: 19

Itasca, Illinois, USA
January 1, 2019

John Fellowes

W.E.E.E.

This product is classified as Electrical and Electronic Equipment. Should the time come for you to dispose of this product please ensure that
you do so in accordance with the European Waste of Electrical and Electronic Equipment (WEEE) Directive and in compliance with local
laws relating to this directive.

For more information on the WEEE Directive please visit www.fellowes.com/WEEE

1789 Norwood Avenue, Itasca, Illinois 60143 • 1-800-955-0959 • www.fellowes.com

© 2019 Fellowes, Inc. | Part # 411662 Rev C

PLEASE READ THESE INSTRUCTIONS BEFORE USE.
DO NOT DISCARD: KEEP FOR FUTURE REFERENCE.

ENGLISH

PARTS PROVIDED

SAFETY INSTRUCTIONS/WARNING

Read and follow all instructions and warnings before use.

• Rapido Wireless Charging Pod is for charging Qi™ compatible smartphone only.

• Only use the power supply that was supplied with this product.

• It is normal for the wireless charging surface to get warm during charging. If there is an issue while charging, the indicator lights will flash.

• Keep flammable materials away from charging surface.

• Only use the wireless charger for its intended purpose. Improper use, or use of incompatible devices may result in a risk of fire, explosion, or other hazard.

• DO NOT attempt to charge a device that is damaged or an open battery case or a device that is not Qi™ compatible.

• DO NOT attempt to disassemble or repair the wireless charger.

• DO NOT use if power cord or transformer is damaged.

• Keep the wireless charging surface clean and dry.

• Use a soft, clean, dry cloth to clean the surface of the wireless charger.

• For indoor use only.

A Stand

B Charging Pod

INSTALLATION

STEP 1

Plug in power supply to charging pod.

STEP 3 (OPTIONAL)

Place charging pod onto provided stand.

C Power Supply

STEP 2

Plug power cable into the nearest outlet.

STEP 4

Place charging pod with or without stand onto table or sit-stand
workstation.

CAPABILITIES

Port Description Specifications

1 Barrel Connector Power (12V, 3A)
2 USB Port (Type A) Fast Charging 5V,9V,12V, Max 2.4A
3 USB Port (Type C) Fast Charging 5V,9V,12V, Max 2.4A
4 Wireless Charging Pad 5V~9V, Max 10W

The frequency range is 110KHZ ~ 205KHZ.
The Maximum H-Field is 42dBuA/m

4

2

STEP 5

3

1

Place your Qi-enabled device onto the charging pad or
use the USB ports to charge your device.

Review your devices manual to see if it’s Qi-enabled.

White LED

Standby OFF

Charging On

Foreign Object Detected Flash

2

3