Operating Instructions
Operating Instructions
Operating Instructions
A
B
C
Model: TB 100
TB 200
Equipment Parts
1. On\Off Switch
2. Ready Light
3. Binding Area
4. Cooling Stand
5. Binding Timer (TB 200 only)
Using the Binding
Machine
1. Turn On\Off switch to "On" position.
2. Machine is ready to bind when Ready Light
illuminates (approximately 1-2 minutes).
3. Using the table below, choose the correct thermal
cover based on the total number of sheets to be
bound:
Thermal Cover Size
# of Sheets
Inches mm
1-30 1\8" 3.2
31-60 1\4" 6
61-90 3\8" 9.5
91-120 1\2" 12.5
121-150 5\8" 15.5
151-180 3\4" 20
181-200 1" 25
4. Insert sheets into thermal cover. Be sure all
sheets are perfectly aligned and in contact with
glue strip.
5. Place document in Binding Area.
NOTE: Index portion of cover should be in
bottommost part of machine.
6. TB 100: Allow machine to bind document for 30-60
seconds.
TB 200: Press Binding Timer. Binding is complete
when Timer sounds. Turn off Timer by pressing
button.
7. Remove document from Binding Area. Gently tap
document on tabletop to complete the binding
cycle.
8. Allow finished document to cool vertically for 8-10
minutes by placing on Cooling Stand.
NOTE: Do not open finished document before
cooling cycle completes. Glue must adhere to all
pages.
Adding/Removing
Sheets from Bound
Document
Adding or removing pages from a bound document is
possible, but not recommended.
ADDING PAGES
1. Place sheets to be added at their required position
in the document.
2. Place document in Binding Area.
3. TB 100: Allow machine to bind document for 3060 seconds.
TB 200: Press Binding Timer. Binding is complete
when Timer sounds. Turn off Timer by pressing
button.
4. Remove document from Binding Area. Again, gently
tap document on tabletop to complete the binding
cycle.
5. Allow finished document to cool vertically for 8-10
minutes by placing on Cooling Stand.
NOTE: Do not open finished document before
cooling cycle completes. Glue must adhere to all
pages.
A
B
C
1
2
5
4
3
1
2
4
3
Specifications
TB 100 TB 200
Maximum Binding Length 13 inches 13 inches
(330mm) (330mm)
Maximum Binding Capacity 200 sheets 200 sheets
Maximum Binding Diameter 1" 1”
(25mm) (25mm)
Dimensions 15-3/4 x 6-3/8 x 7-7/8" 15-3/4 x 6-3/8 x 7-7/8"
(LxWxH) (400 x 162 x 200) (400 x 162 x 200)
Weight 3lbs. 3lbs.
(1.4kg) (1.4kg)
Warranty 1 year 1 year
Limited Warranty
A
B
C
REMOVING PAGES
1. Place document in Binding Area.
2. TB 100: Allow glue to soften (approximately 1-2
minutes).
TB 200: Press Binding Timer. Binding is complete
when Timer sounds. Turn off Timer by pressing
button.
3. Remove selected pages laterally and rapidly.
4. Remove document from Binding Area. Gently tap
document on tabletop to complete the binding cycle.
5. Allow finished document to cool vertically for 8-10
minutes by placing on Cooling Stand.
NOTE: Do not open finished document before
cooling cycle completes. Glue must adhere to
all pages.
Fellowes Manufacturing Company warrants all TB
Model Binding Machines to be free from defects in
material and workmanship for a period of one year
from the date of purchase by the original consumer.
The exception to this are the punching dies which are
subject to wear. If any part is found to be defective
during the warrant period, your sole and exclusive
remedy will be repair or replacement, at Fellowes’
option and expense, of the defective part.
This warranty does not apply in cases of abuse,
mishandling or unauthorized repair. ANY IMPLIED
WARRANTY, INCLUDING THAT OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY
LIMITED IN DURATION TO THE APPROPRIATE
WARRANTY PERIOD SET FORTH ABOVE. In no event
shall Fellowes be liable for any consequential or
incidental damages attributable to this product. This
warranty gives you specific legal rights. You may have
other legal rights which vary from state to state. To
obtain service under this warranty on machines
purchased in the USA, return the machine prepaid to
the address below. Please allow two weeks for
processing.
Return with machine:
• Copy of original sales receipt.
• A card stating your name, address, daytime
telephone number, machine model and serial
number, plus a brief description of the problem.
For specific instructions on obtaining service under this
warranty on machines purchased outside the USA,
contact the appropriate location listed below.
Warrantor: Fellowes Manufacturing Company
U.S. 1-800-955-0959
Australia + 6139-330-3211 (inside Melbourne)
1-800-331-177 (outside Melbourne)
Benelux + 31-3473-77988
Canada 1-800-665-4339
France + 334-789-12279
Germany + 4951-31-49770
Japan + 81-3-5496-2401
U.K. + 44-1302-885331
Australia Benelux Canada France Germany Italy Japan Poland United Kingdom
Tullamarine, Vic Vianen, NL Markham, Ont. Rennes, I-V Garbsen, Han. Camerano, AN Tokyo Warsaw Doncaster, S. Yorks.
®
1789 Norwood Avenue, Itasca, Illinois 60143-1095 630-893-1600 Customer Service 1-800-945-4545 http://www.fellowes.com
Part No. © 2000 Fellowes Printed in U.S.A.
Loading...