Feig Electronic MR100, PR100 Users Guide

Professional Installation Guide

File : ID ISCMR100-Installation Guide.DOC
Date : 10.09.2001

Professional Installation Guide

ID ISC.MR100 for FCC Requirements

Installation with FCC Approval:

ID ISC.MR100

1 / 1

Electrical connection, commissioning, maintenance, measurement and calibration
work on the unit is to be performed only by electrical specialists or persons with
equivalent training.

In countries where FCC approval is required, the ID ISC.MR100 Reader may only be
operated using the antennas listed in Table 1.
Changes or modifications not expressly authorized by the relevant approval body may result
in revocation of the user’s operating permission.

An SMA socket is provided on the circuit board for connecting the external antenna.
The maximum tightening torque for the SMA sockets is 0.45 Nm.
(Caution: Higher tightening torque will damage the connector.)

Article No. Part No.

1663.000.00.00 ID ISC.ANT340/240

Table 1: Antennas with FCC Approval