Fedders FV95A User Manual

FV95A Series All-Position Gas Furnace

The Fedders 95% High Efficiency All-Position
Two-Stage Gas Furnaces are 40" tall and among
the smallest in the industry. They are ready to
accommodate the 13 SEER “A” Coils for today’s
more efficient air conditioning systems and the
changing needs of home construction. The

ue FV95A Series Furnace offers unmatched

uniq
installation flexibility and provides consistent

culation and temperature control.

air cir

FV95A

Series

All-Position Gas Furnace

95% AFUE – Two-Stage, Variable Speed

STANDARD FEATURES:

Designed for all-position installation: upflow, downflow and horizontal

40" high, for ease of installation

AL 29 - 4C stainless steel secondary heat exchanger

Industry-proven, integrated hot surface ignition control with igniter
and flame sensor positioned in coolest part of flame for ultimate
performance and longevity

Aluminized-steel multi-port in-shot burners provide smooth ignition
coupled with superior flame stability, low noise and reliability

California low NO

Insulated cabinet to increase efficiency and reduce sound levels

Single or two-stage thermostat ready

Supports two-stage cooling units

Electronic air cleaner and humidifier terminals

EASY TO INSTALL AND SERVICE:

Built-in self diagnostics with fault code view without removing

oor

the d

X approved

EFFICIENCY:

95% AFUE

Variable speed blower motor

Two-stage induced draft blower

WARRANTY:

Lifetime limited warranty on heat exchanger

5-year limited warranty on all other parts

EFFICIENCY
RATING
CERTIFIED

ama

MODEL

FV95A0543A 54,000 95 1.5 - 3 40 x 17.5 x 29

FV95A0723A 72,000 95 1.5 - 3.5 40 x 20.5 x 29

FV95A0905A 90,000 95 2.5 - 5 40 x 20.5 x 29

FV95A1085A 108,000 95 2.5 - 5 40 x 24.5 x 29

All-position capability easily converts from upflow to horizontal
left and right position with minimum effort

Easily removable blower with slide-out design

Factory shipped for natural gas, with LP Gas conversion kits available

Left or right side gas and electrical connections

ctive and passive dehumidification in conjunction with

A
cooling system

INPUT

(BTUH)

Specifications subject to change without notice.

EFFICIENCY

(AFUE %)

COOLING

CAPACITY

(Tons)

UNIT DIMENSIONS
H x W x D (Inches)

Product Specifications

95% AFUE, ALL-POSITION, TWO-STAGE, VARIABLE SPEED GAS FURNACE

Model Number FV95A0543A FV95A0723A FV95A0905A FV95A1085A

Position All-Position All-Position All-Position All-Position

Electrical Characteristics

Volts 120 120 120 120

Hertz 60 60 60 60

Phase 1 1 1 1

Operating Voltage Range (Min-Max) 102 - 132 102 - 132 102 - 132 102 - 132

Max Fuse or CKT Breakers (Amps) 15 15 15 15

Minimum Wire Size 14 14 14 14

Performance Data - Input BTUH

Low 35,100 46,800 58,500 70,200

High 54,000 72,000 90,000 108,000

Performance - Cooling Data

Furnace Cooling Category (Tons) 1.5 - 3 1.5 - 3.5 2.5 - 5 2.5 - 5

AFUE%

Direct Vent (2 pipe) Upflow 95 95 95 95

Direct Vent (2 pipe) Horizontal / Downflow 94 94 94 94

Min. Output Capacity

Direct Vent (2 pipe) - Low Upflow 33,345 44,460 55,575 66,690

Direct Vent (2 pipe) - Low Horizontal / Downflow 32,994 43,992 54,990 65,988

Direct Vent (2 pipe) - High Upflow 51,300 68,400 85,500 102,600

Direct Vent (2 pipe) - High Horizontal / Downflow 50,760 67,680 84,600 101,520

Certified Temperature Rise

Temperature Rise (°F ) Low 35 - 65 35 - 65 35 - 65 35 - 65

Temperature Rise (°F ) High 35 - 65 35 - 65 35 - 65 35 - 65

Airflow at 0.5" Static

Airflow CFM Approx

Airflow CFM Approx High Heating ∆T 50°

Airflow Cooling Max 1,200 1,400 1,800 1,900

Component Data

Blower Information

Blower Diameter & Width (Inches) 11 x 7 11 x 7 11 x 10 11 x 10

Variable Speed Motor 3/4 hp - ECM 3/4 hp - ECM 1 hp - ECM 3/4 hp - ECM

Motor Speed Variable Variable Variable Variable

Motor Full Load Amps 7.7 9.6 12.8 9.6

Inducer Draft Blower

Type 2-Speed 2-Speed 2-Speed 2-Speed

Low Heating

∆T 50

°F

F

618 823 1,029 1,235

950 1,267 1,583 1,900

2

Specifications subject to change without notice.