DATA SUBMITTAL SHEET
Split System Air Conditioner
11⁄2 through 5 Tons • 208/230 Volt, 1-Phase, 60 Hz
Efficiency rating of 13 SEER and 14 SEER • Models C18 through C60
JOB NAME: LOCATION:
PURCHASER: ORDER NO:
ENGINEER:
SUBMITTED TO: FOR:
REF: APPROVAL: CONSTRUCTION:
SUBMITTED BY: DATE:
UNIT DESIGNATION: SCHEDULE NO: MODEL NO:
DIMENSIONS:
A
AIR DISCHARGE
FIELD POWER
SUPPLY CONNECTION
1 1/8" HOLE
FIELD CONTROL
SUPPLY CONNECTION
1/4" HOLE
LIQUID LINE
CONNECTION
D
VAPOR LINE
CONNECTION
E
DIMENSIONS IN INCHES
MODELS A B C D E F
C18ABD1VF 21 1/2 26 1/2 21 1/2 3/8 3/4 2 1/2
C24ABD1VF 21 1/2 26 1/2 21 1/2 3/8 3/4 2 1/2
C30ABD1VF 21 1/2 32 1/2 21 1/2 3/8 7/8 2 1/2
C36ACD1VF 29 1/2 32 1/2 29 1/2 3/8 7/8 2 1/2
C42ACD1VF 29 1/2 32 1/2 29 1/2 3/8 7/8 2 1/2
C48ACD1VF 29 1/2 32 1/2 29 1/2 3/8 7/8 2 1/2
C60ACD1VF 29 1/2 39 29 1/2 1/2 1 1/8 2 1/2
B
F
AIR IN
TOPSIDE
AIR IN
AIR DISCHARGE
AIR IN
C
Rated in Accordance with ARI Standard 210.
Certification Applies Only When Used with Proper Components as Listed with ARI.
Additional rating information can be found at
www.aridirectory.org
Split System Air Conditioner
PRODUCT DATA
COOLING PERFORMANCE
Total Capacity MBH
Sensible Capacity MBH
Outdoor Design Temp °F
ELECTRICAL DATA
Power Supply / /
otal Unit Ampacity AMPs
T
Power Input Req KW
Minimum Wire Size AWG
Maximum Overcurrent Device
Fuses ■■Circuit Breaker
■■
UNIT WEIGHT
STANDARD FEATURES:
• Factory-installed liquid line filter drier
• Long-life enhanced copper tubes and aluminum fins
• State-of-the-art high efficiency compressors
• Large, wrap-around coil surface
• Full louvered panel to protect coil
• Galvanized steel exterior cabinet with
1,000-hour salt-spray and powder-coated finish
• Powder-coated fan guard
• Formed base with 2 1/2" ground clearance
• Factory-charged with R-22 refrigerant
• Only 3 screws to access electrical controls
• Easy access to service valves
• Compact design
Unit Weight LBS
NOTES:
Fedders Corporation
505 Martinsville Rd.
Liberty Corner, NJ 07938 USA
(908) 604-8686
Form No. F-SS-CDU
All product specifications reflect available information at the printing of this data submittal sheet.
Fedders reserves the right to revise or modify products and/or specifications without notice.
©2007 Fedders North America, Inc. Fedders is a registered trademark of Fedders North America, Inc.
FD-097-b -0707