VERTUS CLA was created with the thought
of integrating professional line array
technology in an extremely compact and
elegant speaker column.
Compared to the traditional two-way speakers,
the sound is distributed much more evenly throughout the audience, both in outdoor
and in indoor environments acoustically difficult
or reverberating as well. The CLA cylindrical
wave front boasts the pleasant effect of present
and precise forwardly projected sound. Even
acoustic feedback towards microphones is
reduced.
VERTUS CLA is a light and compact modular
line array system created for both live and fixed
installations, comprised by two products:
CLA604a is an extruded aluminum
column speaker fitted with 6 x 4” custom
woofers and 4 x 1” dome tweeters, each coupled to a wave guide. The internal Class D
amplification, 400W for woofers and 100W
for tweeters with switch mode power supply
and DSP processor with 4 equalization presets provide unexpected dynamics in a
system of these dimensions.
The rapid latching system with pins allows
for the expansion of the system, doublingup CLA608a modules to form a unified
column with an absolute and coherent source
integration and increase of SPL and lowfrequency directivity control.
CLA 208Sa is a 2 x 8” active subwoofer in
bass-reflex design and birch ply enclosure. The
internal Class D amplifier delivers 600W and
is matched with a switch mode power supply
and a DSP processor with filtering functions,
equalization and speaker protection. Created
with the idea of extending the CLA608a’s
low frequency performance in live
applications, the CLA208Sa serves as the base
support for the CLA608a column speaker which
can either be frontally mounted to the sub, as
well as fixed upon the optional stand through
the M20 socket on the upside of the sub.
The CLA208Sa subwoofers are modular as well,
and they can be stacked to enlarge and increase
the maximum SPL.
Page 3
CLA system features:
s High-level sound quality from 50Hz
to 20kHz expressly developed for live
performance
s Long distance sound projection and better
SPL distribution towards the audience
s Great and dynamic power performance
thanks to tri-amplification system
s Lightweight and easy to carry
s Design and elegance for an easy integration
even in the most demanding installations
s Very compact dimensions enable the
listener to concentrate on sound and not on
speakers!
s High horizontal dispersion
Vertus CLA 604A
400+100W
Vertus CLA 208SA
600W
The technology and quality of a professional
line array in a compact column
The internal XLR signal link system and Neutrik
POWERCONN power supply on both the sub
and the satellite, allows for hiding wires
and cables from open sight, preserving the
system’s clean aesthetics.
VERTUS CLA is a true professional line array
system that can satisfy the musician looking for
a compact PA solution, easily to carry, modular,
ready to use in just minutes with no-compromise
quality. It is capable of being integrated
into any environment or installation
requiring high-quality sound and controlled
directional characteristics.
Line Array Systems
Vertus
17
Page 4
Vertus CLA 604A
Column Active Line Array
400W + 100W RMS - 125dB SPL
s 2-way bi-amplified Line Array Column
s 6 x 4” (100mm) custom woofer with 1” (25
mm) voice coil
s 4 x 1” (25mm) neodymium dome tweeter on
waveguide
s 130Hz to 20KHz frequency response
s Class D 400Wrms amplifier for LF and
100Wrms for HF with switch mode power
supply
s DSP processor with 4 available equalization
presets
s Control panel with volume, presets, HP filter,
Mic-Line, status LED
s XLR input and Neutrik POWERCONN supply
input at the lower part of the column; XLR
link and Neutrik POWERCONN loop output
at the higher part, in order to hide each
connection cable
s 100°H x 20°V dispersion
s Extruded-aluminum powder-coated
cabinets. Superior as well as inferior latching
system, enables the extension of the length of
the line array adding CLA604A modules for a
greater modularity of the system
s Possibility to angle the columns of +/- 30° on
a horizontal plane
s Ideal for both live applications, assisted by the
CLA 208SA active subwoofer, as well as for
fixed installation
s Easily expandable for a total power of
6600W (stereo system composed of 3 x
CLA608A and 3 x CLA208SA)
s Very light and easy to carry
Page 5
Vertus CLA 208SA
Processed Active Subwoofer
600W RMS - 129dB SPL
s Active subwoofer in bass-reflex design
s 2 x 8” (200mm) custom neodymium, high-
excursion woofer with 2” (50 mm) voice coil
s 50Hz to 150Hz frequency response
s Class D 600Wrms amplifier with switch
mode power supply
s DSP processor with 4 available presets
s Control panel with combo XLR/Jack stereo
input and link, XLR Hi-pass out stereo,
volume, presets, 0°-180° phase switch, status
LED
s Neutrik POWERCONN input and link
s 15mm birch plywood enclosure with anti-
scratch paint finish, stackable
s M20 stand adapter, 2 integrated handles,
front hardware to sustain CLA604A modules
s Suitable for low frequency extension and
reinforcement of the CLA604A array,
especially for live performance
Line Array Systems
Vertus
19
Page 6
ModelCLA604aCLA208Sa
Configurationway 21
Built-in amplifier cont. rms LF/HFW 350/80400
Built-in amplifier max. rms LF/HFW 400/100600
Built-in amplifier max. peak LF/HFW 800/2001200
Frequency response@-6dB 130Hz - 20KHz50Hz - 150Hz
Low frequency wooferinch 6 x 4” - 1” coil2 x 8” - 2” coil
High frequency driverinch 4 x 1” - 1” coil-
Maximum SPL cont/peakdB 122 / 125125 / 129 half space
DispersionH x V 100° x 20°Omnidirectional
Input impedancekOhm 2222
Crossover frequencykHz 2.50.15
AC Power requirementsVA 450450
Input connectorsXLR with loopstereo XLR with loop/HP out
Power cordm/inch 5 / 16.45 / 16.4
mm
Net dimensions (WxHxD)
Net weightkg/lb 9 / 19.8420 / 44.09
Transport dimensions (WxHxD)
Transport weightkg/lb 11.5 / 25.3523.5 / 51.80
130x841x130
inch
5.12x33.1x5.12
mm
220x930x220
inch
8.66x36.61x8.66
550x270x500
21.7x10.6x19.7
690x370x625
27.16x14.56x24.60
Vertus
ProMaxX
20
20
VT-W604
VT-S604
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.