LS-103 SERIES POWERHEAD
OWNERS
MANUAL
Warranty:
Our products are guaranteed against defective materials and workmanship. We will repair or replace such items as may prove defective at our option. Warranty period is one year on items manufactured by FAWCETT. On items not manufactured by FAWCETT, the manufactures warranty applies. All component parts of our products are covered by this warranty, except for normal wear items such as impellers. We cannot be responsible for damage or abuse to equipment caused by improper installation or operation. Warranties can also be voided by unauthorized disassembly of equipment. For warranty repairs, equipment is returned to FAWCETT at the customer's expense; we will repair and return to customer at our expense. Under no circumstances will we allow labor charges or other expense to repair defective merchandise. This warranty is exclusive and is in lieu of all other warranties, whether expressed or implied. FAWCETT shall not be liable for any other damages, whether consequential, indirect, or incidental, arising from the sale or use of its products.
LS 103 SERIES POWERHEADS
Contents: |
Page: |
Model – Drawing Data |
2 |
Safety, General & Receiving |
3 |
Installation |
4 |
Operation / Maintenance |
5/6 |
Assembly |
7 |
Internal Parts Diagram |
|
Order Form
Survey
FAWCETT Co., Inc.
3863 Congress Pkwy.
Richfield, OH 44286 phone: 330.659.4187 fax: 330.659.6991
LS Series Powerheads
Model: LS-103A
Date:_____________________
Order No.:_________________
Motor Details:
Motor Part No.: 30A
H.P.: 1.8 max
RPM: 300 – 3,000
Repair Kit #: K203
FAWCETT, Inc. |
PH manual |
04/06 |
Page 2 of 7 |
Safety
Please follow the below safety precautions. If there are any questions, please call FAWCETT at 330 659-4187.
Please read this complete manual before trying to operate your mixer. Failure to follow these instructions could result in serious bodily injury or death.
• Do not touch moving parts while mixer is operating.
Do not wear loose-fitting clothes or jewelry around an operating mixer. Keep all hands, feet, clothes, neckties, necklaces and other objects clear of moving parts.
•Never move the unit with the motor running.
•Have a qualified individual bring air to your unit.
•Never run the unit in open air.
•Never adjust the speed without the unit running.
Air Motor Safety:
The air motor is designed to be driven by compressed air and under no circumstances be driven with any other gases. Fluids, particles, solids or any substance mixed with air, particularly combustible substances likely to cause explosions, must not drive air motor.
•Air motor is designed for air only. Do not allow corrosive gases or particulate material to enter motor. Water vapor, oil-based contaminants, or other liquids must be filtered out.
•Do not use a hammer or force coupling onto shaft when installing drive onto air motor. This causes end thrust that could damage air motor.
•Ambient temperature should not exceed 200°F.
•Beware of any exposed and/or movable parts to prevent personal and/or property damage.
•Solid or liquid material exiting unit can cause eye or skin damage. Keep away from air stream.
•Always disconnect air supply before servicing.
•Do not allow air motor to “run free” at high speeds with no loads. Excessive internal heat build-up, loss of internal clearances and rapid motor damage will result.
•Some models may exceed 85dB (A) sound level. Hearing protection should be worn when in close proximity to these models.
FAWCETT, Inc. |
PH manual |
General
•All models include an air control valve (types vary).
•Air motors include exhaust muffler.
LS-2200GR – Gear Driven Series
Gear Drive Models - The 15:1 ratio gearhead provides plenty of torque for all sorts of tough jobs. They will quickly mix containers of higher viscosity materials like heavy paints, resins, polymers, etc., as well as re-suspend settled materials. As the direct drive models above, they come with a valve and muffler
Receiving
Before removing any packing, visually inspect the exterior of the shipment for any sign of damage. Should there be any damage, bring it to the attention of the delivering UPS or truck line and note the same on the receiving ticket. Should there be damage you must place a claim with the truck line. They are the only ones who will pay for the damage done and you are the only one who can place that claim.
04/26/2006 |
page 3 of 7 |
Loading...