Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it
decades of professional experience and innovation. Ingenious and stylish, it has been designed
with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great
results every time.
Welcome to Electrolux.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com
Register your product for better service:
www.electrolux.com/productregistration
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate. Model, PNC, Serial Number.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
1. SAFETY INFORMATION
Before the installation and use of the appliance, carefully
read the supplied instructions. The manufacturer is not
responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with
the appliance for future reference.
1.1 Children and vulnerable people safety
WARNING!
Risk of suffocation, injury or permanent disability.
• This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they are supervised by an adult or a person who is responsible for their safety.
• Do not let children play with the appliance.
• Keep all packaging away from children.
• Keep children and pets away from the appliance when
it operates or when it cools down. Accessible parts are
hot.
• If the appliance has a child safety device, we recommend that you activate it.
• Cleaning and user maintenance shall not be made by
children without supervision.
ENGLISH3
1.2 General Safety
• Internally the appliance becomes hot when in operation. Do not touch the heating elements that are in the
appliance. Always use oven gloves to remove or put in
accessories or ovenware.
• Do not use a steam cleaner to clean the appliance.
• Before maintenance cut the power supply.
www.electrolux.com
4
• Do not use harsh abrasive cleaners or sharp metal
• Excess spillage must be removed before the pyrolytic
• Only use the core temperature sensor recommended
• To remove the shelf supports first pull the front of the
scrapers to clean the glass door since they can scratch
the surface, which may result in shattering of the glass.
cleaning. Remove all parts from the oven.
for this appliance.
shelf support and then the rear end away from the side
walls. Install the shelf supports in the opposite sequence.
2.
SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appli-
ance.
• Obey the installation instruction sup-
plied with the appliance.
• Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
• Do not pull the appliance by the handle.
• Keep the minimum distance from the
other appliances and units.
• Make sure that the appliance is installed
below and adjacent safe structures.
• The sides of the appliance must stay
adjacent to appliances or to units with
the same height.
Electrical connection
WARNING!
Risk of fire and electrical shock.
• All electrical connections should be
made by a qualified electrician.
• The appliance must be earthed.
• Make sure that the electrical information
on the rating plate agrees with the power supply. If not, contact an electrician.
• Always use a correctly installed shockproof socket.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the
mains plug and to the mains cable.
Contact the Service or an electrician to
change a damaged mains cable.
• Do not let mains cables to come in
touch with the appliance door, specially
when the door is hot.
• The shock protection of live and insulated parts must be fastened in such a
way that it cannot be removed without
tools.
• Connect the mains plug to the mains
socket only at the end of the installation. Make sure that there is access to
the mains plug after the installation.
• If the mains socket is loose, do not
connect the mains plug.
• Do not pull the mains cable to disconnect the appliance. Always pull the
mains plug.
• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
• The electrical installation must have an
isolation device which lets you disconnect the appliance from the mains at all
poles. The isolation device must have a
contact opening width of minimum 3
mm.
• Fully close the appliance door, before
you connect the mains plug to the
mains socket.
2.2 Use
WARNING!
Risk of injury, burns or electric
shock or explosion.
• Use this appliance in a household environment.
• Do not change the specification of this
appliance.
• Make sure that the ventilation openings
are not blocked.
• Do not let the appliance stay unattended during operation.
• Deactivate the appliance after each
use.
• Internally the appliance becomes hot
when in operation. Do not touch the
heating elements that are in the appliance. Always use oven gloves to remove or put in accessories or ovenware.
• Be careful, when you open the appliance door while the appliance is in operation. Hot air can release.
• Do not operate the appliance with wet
hands or when it has contact with water.
• Do not apply pressure on the open
door.
• Do not use the appliance as a work
surface or as a storage surface.
• Always keep the appliance door closed
when the appliance is in operation.
• Open the appliance door carefully. The
use of ingredients with alcohol can
cause a mixture of alcohol and air.
• Do not let sparks or open flames to
come in contact with the appliance
when you open the door.
• Do not put flammable products or items
that are wet with flammable products
in, near or on the appliance.
ENGLISH5
WARNING!
Risk of damage to the appliance.
• To prevent damage or discoloration to
the enamel:
– Do not put ovenware or other objects
in the appliance directly on the bottom.
– Do not put aluminium foil directly on
the bottom of the appliance.
– do not put water directly into the hot
appliance.
– do not keep moist dishes and food in
the appliance after you finish the cooking.
– be careful when you remove or install
the accessories.
• Discoloration of the enamel has no effect on the performance of the appliance. It is not a defect in the sense of
the warranty law.
• Use a deep pan for moist cakes. Fruit
juices cause stains that can be permanent.
Steam Cooking
WARNING!
Risk of burns and damage to the
appliance.
• Do not open the appliance door during
steam cooking. Steam can release.
2.3 Care and Cleaning
WARNING!
Risk of injury, fire or damage to
the appliance.
• Before maintenance, deactivate the appliance and disconnect the mains plug
from the mains socket.
• Make sure the appliance is cold. There
is the risk that the glass panels can
break.
• Replace immediately the door glass
panels when they are damaged. Contact the Service.
• Be careful when you remove the door
from the appliance. The door is heavy!
• Clean regularly the appliance to prevent
the deterioration of the surface material.
• Remaining fat or food in the appliance
can cause fire.
www.electrolux.com
6
• Clean the appliance with a moist soft
• If you use an oven spray, obey the safe-
• Do not clean the catalytic enamel (if ap-
Pyrolytic cleaning
• Read carefully all the instructions for
• Keep children away from the appliance
• Provide good ventilation during and af-
• Provide good ventilation during and af-
• Remove any pets (especially birds) from
• Some birds and reptiles can be ex-
• Small pets can also be highly sensitive
cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal objects.
ty instructions on the packaging.
plicable) with any kind of detergent.
WARNING!
Risk of fire and burns.
Pyrolytic cleaning.
while the Pyrolytic cleaning is in operation. The appliance becomes very hot.
ter each Pyrolytic cleaning.
ter the first use at maximum temperature operation.
the vicinity of the appliance location
during and after the Pyrolytic cleaning
and first use maximum temperature operation to a well ventilated area.
tremely sensitive to potential fumes
emitted during the cleaning process of
all Pyrolytic Ovens.
to the localized temperature changes in
the vicinity of all Pyrolytic Ovens when
the Pyrolytic self cleaning program is in
operation.
• Non-stick surfaces on pots, pans,
trays, utensils etc., can be damaged by
the high temperature Pyrolytic cleaning
operation of all Pyrolytic Ovens and can
be also a source for low level harmful
fumes.
• Fumes released from all Pyrolytic
Ovens / Cooking Residues as described are not harmful to humans, including infants or persons with medical conditions.
2.4 Internal light
• The type of light bulb or halogen lamp
used for this appliance, is only for
household appliances. Do not use it for
house lighting.
WARNING!
Risk of electrical shock.
• Before replacing the lamp, disconnect
the appliance from the power supply.
• Only use lamps with the same specifications.
2.5 Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the
mains supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent children and pets to get closed in the appliance.
3. PRODUCT DESCRIPTION
12
12
5
4
3
11
2
1
10
9
8
Electronic programmer
1
Water drawer
2
Socket for the core temperature sen-
3
sor
Grill
4
Oven lamp
5
7
Fan
6
Shelf support, removable
7
Draining pipe
8
Water outlet valve
3
4
5
6
9
Rating plate
10
Shelf positions
11
Steam inlet
12
3.1 Oven accessories
Wire shelf
•
For cookware, cake tins, roasts.
Baking tray
•
For cakes and biscuits.
• Grill- / Roasting pan
To bake and roast or as pan to collect
fat.
• Core temperature sensor
To measure how far the food is cooked.
ENGLISH7
4. BEFORE FIRST USE
WARNING!
Refer to "Safety information"
chapter.
4.1 Initial cleaning
• Remove all accessories and removable
shelf supports (if applicable).
• Clean the appliance before first use.
Refer to the chapter "Care and
cleaning".
4.2 First connection
When you connect the appliance to the
mains, or after a power cut, you must set
the language, display contrast, display
brightness and time of day.
1.
Touch or to set the value.
2.
Touch OK to confirm.
4.3 Preheating
Preheat the empty appliance to burn off
the remaining grease.
1.
Set the function and the maximum
temperature.
2.
Let the appliance operate for 45 minutes.
3.
Set the function and the maximum
temperature.
4.
Let the appliance operate for 15 mi-
nutes.
Accessories can become hotter than usually. The appliance can emit an odour and
smoke. This is normal. Make sure that the
airflow is sufficient.
www.electrolux.com
8
5. CONTROL PANEL
Electronic programmer
110
2438 956 7
Use the sensor fields to operate the appliance
Number
1
2
3
4
5
6
Sensor
field
11
FunctionComment
On / offTo activate and deactivate the appli-
ance.
Heating Functions or Assisted Cooking
To choose a heating function or an Assisted Cooking function. To have access to the necessary function, touch
the field once or twice when the appliance is activated. To activate or deactivate the light, touch the field for 3 seconds.
Home keyTo go back one level in the menu. To
show the main menu, touch the field for
3 seconds.
Temperature
selection
To set the temperature or show the current temperature in the appliance. To
activate or deactivate the Fast Heat Up
function, touch the field for 3 seconds.
Favourite Programme
To save and have access to your favourite programmes.
Up keyTo move up in the menu.
7
Down keyTo move down in the menu.
Time and additional functions
To set different functions. When a heating function operates, touch the sensor
field to set the timer, Child Safety, Fa-
8
vourite Programme memory, Heat +
Hold or Set + Go or to change the settings of the core temperature sensor
(for selected models only).
9
10
Minute MinderTo set the Minute Minder .
OKTo confirm the selection or setting.
ENGLISH9
A
Sensor
field
—
FunctionComment
DisplayShows the current settings of the appli-
BC
Number
11
Display
DE
Other indicators in the display
SymbolFunction
Minute MinderThe function operates.
Time of dayThe display shows the time of day.
DurationThe display shows the necessary time for cook-
ing.
End TimeThe display shows when the cooking time is
completed.
Time IndicationThe display shows how long a heating function
operates. Press
have the time go back to zero.
Heat-up indicatorThe display shows the temperature in the appli-
ance.
Fast Heat Up indicator
The function operates. This function decreases
the heat-up time.
Weight AutomaticThe display shows that the automatic weight
system operates or that you can change the
weight.
Heat + HoldThe function operates.
ance.
A)
Heating function
B)
Time of day
C)
Heat-up indicator
D)
Temperature
E)
Duration and End Time functions
and at the same time to
6. DAILY USE
WARNING!
Refer to "Safety information"
chapter.
6.1 Navigating the menus
Operation of the menus:
1.
Activate the appliance.
2.
Press or to select the menu
option.
3.
Press OK to move to submenu or ac-
cept setting.
At every point you can get back to the
main menu with
www.electrolux.com
10
6.2 The menus in overview
Main menu
Submenus for: Basic Settings
Symbol Menu itemApplication
Heating FunctionsContains a list of heating functions.
Assisted Cooking
Favourite Programme
Contains a list of automatic cooking programmes.
Contains a list of favourite cooking programmes created by the user.
PyrolysisPyrolytic cleaning.
Basic SettingsYou can use it to set other settings.
Specials
Contains a list of additional heating functions.
Symbol SubmenuDescription
Set Time of DaySets the current time on the clock.
Time Indication
SET + GO
Heat + Hold
When ON, the display shows the current
time when you deactivate the appliance.
When ON, you can choose the SET + GO
function in the Select Options window.
When ON, you can choose the Heat + Hold
function in the Select Options window.
Extra timeActivates and deactivates the function.
Display ContrastAdjusts the display contrast by degrees.
Display BrightnessAdjusts the display brightness by degrees.
Set LanguageSets the language for the display.
Buzzer Volume
Key Tones
Adjusts the volume of press-tones and signals by degrees.
Activates and deactivates the tone of the
touch fields.
Alarm/Error TonesActivates and deactivates the alarm tones.
Cleaning AssistantGuides you through the cleaning procedure.
Cleaning ReminderReminds you when to clean the appliance.
Service
Shows the software version and configuration.
Factory SettingsResets all settings to factory settings.
6.3 Heating functions
Submenu for: Heating Functions
Heating functionApplication
True Fan CookingTo bake maximum on three shelf positions at
the same time. When you use this function,
decrease the oven temperature by 20 - 40 °C
from the standard temperatures you use for
Conventional Cooking .
True Fan + SteamTo steam dishes. Use this function to de-
crease the length of the cooking time and to
preserve the vitamins and nutrients in the
food. To use, select the function and set the
temperature between 130 °C to 230 °C.
Pizza SettingTo cook pizza, quiche or pie with steam.
Conventional CookingTo bake and roast on one level.
ENGLISH11
Slow CookTo prepare especially tender, succulent
roasts.
Bottom HeatTo bake cakes with crispy or crusty bottoms
and to preserve food.
ECO RoastingThe ECO functions let you optimize the ener-
gy consumption during cooking. It is necessary to set the cooking time first.
Frozen FoodsTo make convenience food such as chips,
wedges or spring rolls crispy.
GrillingTo grill flat food in the middle of the grill and
to toast bread.
Fast GrillingTo grill flat food in large quantities and to
toast bread.
Turbo GrillingTo roast larger meat joints or poultry with
bones on one shelf position. Also to gratinate
and to brown.
Steam RegeneratingTo reheat already cooked food directly on a
plate.
Submenu for: Specials
Heating functionApplication
Bread BakingTo bake bread with steam.
www.electrolux.com
12
Heating functionApplication
Au GratinTo prepare dishes such as lasagna or pota-
to gratin. Also to gratinate and to brown.
Dough ProvingTo raise the yeast dough before baking.
Plate WarmingTo preheat a plate for serving.
PreservingTo preserve vegetables in glasses and liquid
DryingTo dry sliced fruit such as apples, plums or
Keep WarmTo keep cooked food warm.
DefrostTo defrost frozen food.
6.4 Activating a heating function
1.
Activate the appliance.
2.
Select the Heating Functions menu.
Press OK to confirm.
3.
Set the heating function. Press OK to
confirm.
4. Set the temperature. Press OK to
confirm.
Press once or twice to go directly to the Heating Functions
menu (when the appliance is activated).
6.5 Steam cooking
The water drawer cover is in the
control panel.
1.
Press the cover to open the water
drawer.
2.
Fill the water drawer with 900 ml of
water.
The water supply is sufficient for approximately 55 - 60 minutes.
Do not put water directly into the
steam generator.
Use only water. Do not use filtered
(demineralised) or distilled water.
Do not use other liquids. Do not
put flammable or alcoholic liquids
into the water drawer.
(e.g. mixed pickles).
peaches and vegetables such as tomatoes,
zucchini or mushrooms.
3.
Push the water drawer to its initial position.
4.
Activate the appliance.
5.
Prepare the food in the correct cookware.
6.
Select the steam heating function and
temperature.
7.
If necessary, set the function Duration
or End Time .
The signal sounds at the end of the
cooking time.
8.
Deactivate the appliance.
Let the appliance dry fully with the
door open.
9.
Empty the water tank after the steam
cooking is completed.
WARNING!
Wait a minimum of 60 minutes after each use of the steam cooking
in order to prevent hot water from
exiting the water outlet valve.
6.6 Tank Empty indicator
The display shows Water required and an
acoustic signal sounds when the tank is
empty and must be refilled.
For more information refer to "Steam
Cooking".
6.7 Tank Full indicator
When the display shows Water tank full ,
you can use the steam cooking.
An acoustic signal sounds when the tank
is full.
If you put too much water into
the tank, the safety outlet
moves the excess water to the
bottom of the oven.
Remove the water with a sponge
or cloth.
6.8 Emptying the water tank
Make sure that the appliance is
cool before you start to empty the
water tank.
1.
Prepare the draining pipe (C), included in the same package with the
user manual. Put the connector (B)
onto one of the ends of the draining
pipe.
A
B
C
2.
Put the second end of the draining
pipe (C) into a container. Put it at a
lower position than the outlet valve
(A).
3.
Open the oven door and put the connector (B) into the outlet valve (A).
4.
Push the connector again and again
when you empty the water tank.
5.
Remove the connector from the valve
when the water stops flowing.
WARNING!
Do not use the drained water to fill
the water tank again.
ENGLISH13
The tank can have some water
when the Tank Empty indicator
is on. Wait until the water flow
from the water outlet valve stops.
6.9 Heat-up indicator
When you activate a heating function, the
bar on the display comes on. The bar
shows that the temperature increases.
6.10 Fast Heat Up indicator
This function decreases the heat-up time.
To activate the function, hold
onds. You will see the heat-up indicator
alternates.
for 3 sec-
6.11 Residual heat
When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
6.12 Energy saving
The appliance contains features which help you save energy during everyday cooking:
Residual heat:
•
– When the heating function or pro-
gramme operates, the heating elements are deactivated 10 % earlier
(the lamp and fan continue to operate). For this feature to operate, the
cooking time must be longer than 30
minutes or you must use the clock
functions ( Duration , End Time ).
– When the appliance is off, you can
use the heat to keep food warm. The
display shows the remaining temperature.
• Cooking with the lamp off - Touch
and hold
vate the lamp during cooking.
• Eco functions - refer to " Heating
Functions ".
for 3 seconds to deacti-
www.electrolux.com
14
7. CLOCK FUNCTIONS
7.1 Clock functions
SymbolFunctionDescription
Minute Minder
Duration
End Time
If you set the time for a clock function, the
time starts to count down after 5 seconds.
If you use the clock functions Duration
the appliance deactivates the
heating elements after 90 % of the
set time. The appliance uses the
residual heat to continue the
cooking procedure until the time
ends (3 - 20 minutes).
Setting the clock functions
1.
Set a heating function.
2.
Press again and again until the
display shows the necessary clock
function and the related symbol.
3.
Press or to set the necessary
time. Press OK to confirm.
When the time ends, an acoustic signal sounds. The appliance deactivates. The display shows a message.
4.
Press a sensor field to stop the signal.
and End Time ,
To set a countdown (max 2 h 30 min). This function
has no effect on the operation of the appliance. You
can also activate it when the appliance is off. Use
to activate the function. Press or to set the
minutes and OK to start.
To set how long the appliance has to be in operation (max. 23 h 59 min).
To set the switch-off time for a heating function
(max. 23 h 59 min).
•
With Duration
Time
heating function and the temperature first. Then you can set
the clock function. The appliance deactivates automatically.
•
You can use Duration
End Time
if you want to automatically activate and deactivate the appliance at a given time later.
• When you use the Core temperature sensor (if applicable),
the Duration
you must set the
functions do not operate.
and End
and
at the same time
and End Time
7.2 Heat + Hold
The Heat + Hold function keeps prepared
food warm at 80 °C for 30 minutes. It activates after the baking or roasting procedure ends.
• You can activate or deactivate
the function in the Basic Settings menu.
• Conditions for the function:
– The set temperature is more
than 80 °C.
– The function Duration is set.
Activating the function
1.
Activate the appliance.
2.
Select the heating function.
3.
Set the temperature above 80 °C.
4.
Press again and again until the
display shows Heat + Hold . Press
OK to confirm.
When the function ends, an acoustic signal sounds.
The Heat + Hold function operates for 30
minutes.
The Heat + Hold function stays on if you
change the heating functions.
7.3 Extra Time
The Extra Time function makes the heating function continue after the Duration
ends.
8. AUTOMATIC PROGRAMMES
ENGLISH15
• Applicable for all heating functions with
Duration or Weight Automatic.
• Not applicable for heating functions
with CT Sensor .
Activating the function:
1.
When the cooking time ends, an
acoustic signal sounds. Press a sensor field.
2.
The display shows the message for
Extra Time for five minutes.
3.
Press to activate (or to cancel).
4.
Set the length of the Extra Time .
Press OK to confirm.
8.1 Assisted Cooking with
Recipe Automatic
This appliance has a set of recipes you
can use. Recipes are fixed and you cannot change them.
Activating the function:
1.
Activate the appliance.
2.
Select the Assisted Cooking menu.
Press OK to confirm.
3.
Select the category and dish. Press
OK to confirm.
4.
Select Recipe Automatic . Press OK
to confirm.
When you use the Manual function, the appliance uses automatic
settings. You can change them as
with other functions.
8.2 Assisted Cooking with
Weight Automatic
This function automatically calculates the
roasting time. To use it, it is necessary to
input the food weight.
Activating the function:
1.
Activate the appliance.
2.
Select Assisted Cooking . Press OK
to confirm.
3.
Select the category and dish. Press
OK to confirm.
4.
Select the Weight Automatic . Press
OK to confirm.
5.
Touch or to set the food
weight. Press OK to confirm.
The automatic programme starts. You
can change the weight at any time. Press
or to change the weight. When
the time ends, an acoustic signal sounds.
Press a sensor field to deactivate the signal.
With some programmes turn over
the food after 30 minutes. The
display shows a reminder.
9. USING THE ACCESSORIES
WARNING!
Refer to "Safety information"
chapter.
9.1 Core temperature sensor
The core temperature sensor measures
the core temperature of the meat. When
www.electrolux.com
16
the meat is at the set temperature, the
appliance deactivates.
There are two temperatures to be set:
• The oven temperature.
• The core temperature.
1.
2.
3.
Only use the core temperature
sensor supplied with the appliance or genuine replacement
parts.
Put the tip of the core temperature
sensor into the centre of the meat.
Activate the appliance.
Put the core temperature sensor plug
into the socket on the front of the appliance.
The appliance calculates an approximate end time. The end time is different for different quantities of food, the
set oven temperature (minimum 120
°C) and the operating mode. The appliance calculates the end time in approximately 30 minutes.
6.
Make sure that the core temperature
sensor stays in the meat and in the
core temperature sensor socket during the cooking.
7.
If necessary, you can set a new core
temperature during the cooking. To
do this, touch
8.
When the meat is at the set core tem-
.
perature, an acoustic signal sounds.
The appliance deactivates automatically.
Touch a sensor field to stop the signal.
9.
Remove the core temperature sensor
plug from the socket . Remove the
meat from the appliance.
WARNING!
The core temperature sensor is
hot. There is a risk of burns. Be
careful when you remove the tip
and plug of the core temperature
sensor.
The display shows the core temperature sensor symbol.
4.
Press or in less than 5 seconds to set the core temperature.
5.
Set the oven function and, if necessary, the oven temperature.
B
9.2 Accessories for steam
cooking
The steam kit accessories are not
supplied with the appliance. For
more information, please contact
your local supplier.
The dietary baking dish for steam cooking
functions. The dish has two parts: a hole
for the injector (B) and a steel grill to put at
the bottom of the baking dish.
The injectors and rubber hose. “A” is the
rubber hose”, “B” is the injector for steam
cooking and “C” is the injector for direct
steam cooking.
BAC
Steam cooking in a dietary baking dish
Put the food onto the steel grill in the baking dish. Add some water. Put the injector
(B) into the rubber hose. Put the injector
(B) into the special hole in the dietary baking dish. Put the connector attached to
the rubber hose (A) into the steam inlet.
Put the baking dish onto the first or second shelf position from the bottom. Make
sure that you do not crush the rubber
hose or let it touch a heating element on
the top of the oven. Set the oven for the
steam cooking function.
ENGLISH17
Direct steam cooking
Put the food onto the steel grill in the baking dish. Add some water. Put the injector
(C) into the rubber hose. Put the connector attached to the rubber hose (A) into
the steam inlet.
Do not use the upper part of the
dish.
When you cook food such as chicken,
duck, turkey, kid or large fish, put the injector (C) directly into the empty part of
the meat. Make sure that you do not
cause a blockage of the holes.
www.electrolux.com
18
Be careful when you use the injectors
when the oven operates. Always use oven
10. ADDITIONAL FUNCTIONS
Put the baking dish onto the first or second shelf position from the bottom. Make
sure that you do not crush the rubber
hose or let it touch a heating element on
the top of the oven. Set the oven for the
steam cooking function.
For more information about steam cooking, refer to the cooking tables for steam
cooking.
The rubber hose is specially made
for cooking and does not contain
dangerous materials.
gloves to touch the injectors when the
oven is hot. Always remove the injectors
from the oven when you do not use a
steam function.
10.1 Favourite Programme
menu
You can save your favourite settings, like
duration, temperature or heating function.
They are available in the Favourite Programme menu. You can save 20 programmes.
Saving a programme
1.
Activate the appliance.
2.
Set a heating function or an Assisted
Cooking function.
3.
Touch again and again until the
display shows SAVE . Press OK to
confirm.
4.
The display shows the first free memory position.
Press OK to confirm.
5.
Enter the name of the programme.
The first letter flashes.
Touch
Press OK.
6.
Touch or to move the cursor
to the right or to the left. Press OK.
The next letter flashes. Do steps 5
and 6 again as necessary.
7.
Press and hold OK to save.
or to change the letter.
Useful information:
• You can overwrite a memory position.
When the display shows the first free
memory position, touch
press OK to overwrite an existing programme.
• You can change the name of a pro-
gramme in the menu Edit Programme
Name .
Activating the programme
1.
Activate the appliance.
2.
Select the Favourite Programme
menu. Press OK to confirm.
3.
Select your favourite programme
name. Press OK to confirm.
Press
directly.
to go to Favourite Programme
or and
10.2 Function Lock
The Function Lock prevents an accidental
change of the heating function. You can
activate the Function Lock only when the
appliance operates.
Activating the Function Lock :
1.
Activate the appliance.
2.
Set a heating function or setting.
3.
Press again and again until the
display shows Function Lock.
4.
Press OK to confirm.
5.
The door locks and the symbol of a
key comes on in the display.
If the appliance has the Pyrolytic
cleaning function and the function
operates, the door is locked.
Deactivating the Function Lock :
1.
Press . The display shows a message.
2.
Press and then OK to confirm.
10.3 Child Lock
The Child Lock prevents an accidental
operation of the appliance .
Activating and deactivating the Child
Lock function:
1.
Activate the appliance.
2.
Touch and at the same time
until the display shows a message.
If the appliance has the Pyrolytic
cleaning function and the function
operates, the door is locked.
A message comes on in the display when you touch a sensor
field.
ENGLISH19
When the heating function ends, an
acoustic signal sounds.
Useful information:
• When the heating function operates,
the Function Lock is on.
• You can activate and deactivate the
SET + GO function in the Basic Settings menu.
10.5 Automatic switch-off
For safety reasons the appliance deactivates after some time:
• If an oven function operates.
• If you do not change the oven tempera-
ture.
Oven tempera-
ture
30 °C - 120 °C12.5 h
120 °C - 200 °C8.5 h
200 °C - 250 °C5.5 h
250 °C - maxi-
mum °C
Switch-off time
3.0 h
To unlock the appliance, touch
at the same time again until the display
shows a message.
and
10.4 SET + GO
The SET + GO function lets you set a
heating function (or programme) and use
it later with one press of the sensor field.
Activating the function:
1.
Activate the appliance.
2.
Set the heating function.
3.
Press again and again until the
display shows Duration .
4.
Set the time.
5.
Press again and again until the
display shows SET + GO .
6.
Press OK to confirm.
To start SET + GO , press any sensor field
(except for
starts.
). The set heating function
The automatic switch-off works
with all functions, except Light ,
Duration and End Time .
10.6 Cooling fan
When the appliance operates, the cooling
fan activates automatically to keep the
surfaces of the appliance cool. If you deactivate the appliance, the cooling fan
continues to operate until the temperature
in the appliance cools down.
10.7 Safety thermostat
Incorrect operation of the appliance or defective components can cause dangerous
overheating. To prevent this, the oven has
a safety thermostat which interrupts the
power supply. The oven activates again
automatically when the temperature
drops.
www.electrolux.com
20
11. HELPFUL HINTS AND TIPS
• The appliance has five shelf levels.
Count the shelf levels from the bottom
of the appliance floor.
• The appliance has a special system
which circulates the air and constantly
recycles the steam. With this system
you can cook in a steamy environment
and keep the food soft inside and crusty outside. It decreases the cooking
time and energy consumption to a minimum.
• Moisture can condense in the appliance
or on the door glass panels. This is normal. Always stand back from the appliance when you open the appliance
door while cooking. To decrease the
condensation, operate the appliance for
10 minutes before cooking.
• Clean the moisture after each use of
the appliance.
• Do not put the objects directly on the
appliance floor and do not put aluminium foil on the components when you
cook. This can change the baking results and cause damage to the enamel.
11.1 Baking cakes
• Do not open the oven door before 3/4
of the set cooking time is up.
• If you use two baking trays at the same
time, keep one empty level between
them.
• The Conventional Cooking function at
the default temperature is ideal for
bread baking.
11.2 Cooking meat and fish
• Use a deep pan for very fatty food to
prevent the oven from stains that can
be permanent.
• Leave the meat for approximately 15
minutes before carving so that the juice
does not seep out.
• To prevent too much smoke in the oven
during roasting, add some water into
the deep pan. To prevent the smoke
condensation, add water each time after it dries up.
11.3 Cooking times
Cooking times depend on the type of
food, its consistency, and volume.
Initially, monitor the performance when
you cook. Find the best settings (heat setting, cooking time, etc.) for your cookware, recipes and quantities when you
use this appliance.
11.4 Baking and roasting table
CAKES
Conventional
TYPE OF
DISH
Whisked
recipes
Shortbread
dough
Buttermilk
cheesecake
Apple cake
(Apple pie)
Cooking
Shelf
position
Temp
[°C]
21703 (2 and 4)16045 - 60In a cake
21703 (2 and 4)16020 - 30In a cake
1170216580 - 100In a 26 cm
21702 (left and
True Fan Cook-
ing
Shelf po-
sition
Temp
[°C]
16080 - 100In two 20 cm
right)
Cooking
time
[min]
Notes
mould
mould
cake mould
cake moulds
on a wire
1)
shelf
ENGLISH21
TYPE OF
DISH
Conventional
Cooking
Shelf
position
Temp
[°C]
True Fan Cook-
ing
Shelf po-
sition
Temp
[°C]
Cooking
time
[min]
Notes
Strudel3175215060 - 80In a baking
tray
Jam-tart21702 (left and
right)
Sponge
2170215040 - 50In a 26 cm
cake
Christmas
2160215090 - 120In a 20 cm
cake / Rich
fruit cake
Plum cake1175216050 - 60
Small cakes
31703150 -
- one level
Small cakes
--2 and 4140 -
- two levels
Small cakes
--1, 3 and 5140 -
- three levels
Biscuits /
31403140 pastry
16530 - 40In a 26 cm
cake mould
cake mould
cake mould
In a bread tin
20 - 30In a baking
160
tray
1)
25 - 35In a baking
150
tray
1)
30 - 45In a baking
150
tray
1)
25 - 45In a baking
150
tray
stripes - one
level
Biscuits /
pastry
--2 and 4140 150
35 - 40In a baking
tray
stripes - two
levels
Biscuits /
pastry
--1, 3 and 5140 150
35 - 45In a baking
tray
stripes three levels
Meringues one level
Meringues two levels
3120312080 - 100In a baking
tray
--2 and 412080 - 100In a baking
1)
tray
Buns3190319012 - 20In a baking
1)
tray
Eclairs - one
level
Eclairs - two
levels
3190317025 - 35In a baking
tray
--2 and 417035 - 45In a baking
tray
Plate tarts2180217045 - 70In a 20 cm
cake mould
1)
1)
www.electrolux.com
22
TYPE OF
DISH
position
Rich fruit
cake
Victoria
sandwich
1)
Preheat for 10 minutes.
Conventional
Cooking
Shelf
Temp
[°C]
11602150110 -
11702 (left and
True Fan Cook-
ing
Shelf po-
sition
Temp
[°C]
16030 - 50In a 20 cm
right)
Cooking
time
[min]
120
Notes
In a 24 cm
cake mould
cake mould
BREAD AND PIZZA
TYPE OF
DISH
Conventional
Cooking
Shelf
position
Temp
[°C]
True Fan Cook-
ing
Shelf po-
sition
Temp
[°C]
Cooking
time
[min]
Notes
White bread1190119060 - 701 - 2 pieces,
500 gr per
1)
piece
Rye bread1190118030 - 45In a bread tin
Bread rolls21902 (2 and 4)18025 - 406 - 8 rolls in a
baking tray
Pizza1230 -
250
1230 -
250
10 - 20In a baking
tray or a deep
1)
pan
Scones3200319010 - 20In a baking
1)
tray
1)
Preheat for 10 minutes.
1)
1)
FLANS
TYPE OF
DISH
Conventional
Cooking
Shelf
position
Temp
[°C]
True Fan Cook-
ing
Shelf po-
sition
Temp
[°C]
Cooking
time
[min]
Notes
Pasta flan2200218040 - 50In a mould
Vegetable
2200217545 - 60In a mould
flan
Quiches1180118050 - 60
Lasagne2180 -
190
Cannelloni2180 -
190
1)
Preheat for 10 minutes.
2180 -
190
2180 -
190
25 - 40
25 - 40
In a mould
In a mould
In a mould
1)
1)
1)
ENGLISH23
MEAT
TYPE OF
DISH
Conventional
Cooking
Shelf
position
Temp
[°C]
True Fan Cook-
ing
Shelf po-
sition
Temp
[°C]
Cooking
time
[min]
Notes
Beef2200219050 - 70On a wire shelf
Pork2180218090 - 120 On a wire shelf
Veal2190217590 - 120 On a wire shelf
English roast