OPTICAL
Projection system: optical engine based on 1 DM D™
HD2+ chip, sealed housing, dust proof
DMD panel: resolution 1280x720 pixel
Brightness uniformity: 10% above or below the average
Contrast ratio: > 2800:1 (full 0n / full off)
Projection lens: zoom, 12 elements AR multilayer
coating, motorized focus and zoom,
manual 8% lens shift
Aperture f#: 2.7 (zoom max) - 3.3 (zo om min)
Picture size: 50-250 inches (diagonal measure)
Aspect ratio: 4/3 and 16/9
Throw ratio: 1.8:1 - 2.5:1
(throw distance: picture width)
Focus range: 2.2 - 13.0 m (7’ 3” - 42’ 8”)
Throw Distance: 60” : 2.4m - 3.3m (7’ 11” - 10’ 10”) 80” :
3.2m - 4.4m (10’ 6” - 14’ 5”) 100” : 4.0m -
5.5m (13’ 2” - 18’ 1”)
Keystone adjustment: up to 26°(optical: ± 8° digital: ± 18°)
Lamp: 120 W UHP
Lamp life time: 8000 hours (average value measured in
the laboratory under optimal
conditions; lamp hours can be reduced
if unit is misused)
ELECTRICAL
Input Signals: CVBS on RCA/Phono type connector S-
VHS on Mini-D IN connector RGBHV on
DB15HD connector RGBS / YCrCb on
RCA/Phono type connector DVI-D
Horizontal frequency: from 15 to 80 kHz (up to to UXGA
format @ 60 Hz)
Vertical frequency: 40-100 Hz
Video standards : automatically selected (PAL B,G,H, I,
M,N,60, SECAM, NTS C 3.58, 4.43)
High definition video: ATSC HDTV (480p, 720p, 1080i)
Graphic standards : VGA, SVGA, XGA, SXGA, UXGA
Deinterlacer: Faroudja chip set, DCDi™, 3:2 pull
down sequence conversion
Colour temperature: adjustable from 5000 to 9300 degrees K.
Separate memories for video and high
resolution inputs - prealigned by Faroudja.
Video processor: DTI, CTI, comb filter, noise reduction.
Sharpness, Y/C delay and NTSC tint
adjustments
Remote control: via infrared remote control and
via computer through RS232
serial interface
Remote inputs: via Remote Inputs Interface (optional)
and cable with EVC connector
Low Voltage Power Output: two 12 Vdc output, 100 mA max on
jack connectors
GENERAL
Supply: from 100 to 240 Vac, -10% +6%
tolerance
Frequency: from 48 to 62 Hz
Consumption: 180 W max
Fuse: T 3.15A H, 5 x 20 mm
Dimensions of projector: 352 mm x 174 mm x 318 mm (LxHxD)
13”-7/8 x 6”-7/8 x 12”-1/2 (LxHxD)
Weight of projector: 12.8 lbs. (5.8 kg)
Packaging and 400 mm x 275 mm x 405 mm (LxHxD)
gross weight: 1’ 4” x 11” x 1’ 4” (LxHxD) double
reinforced carton; expandable anti-
shock packaging; gross weight,
including accessories: 8 kg (17.7 lbs);
recyclable packaging material
ENVIRONMENTAL
Operation temperature: 0 to 35°C (32° to 95° F)
Transportation temp.: -10 to 55°C (14° to 131°F)
Storage temperature: -10 to 55°C (14° to 131°F)
Humidity: 10% to 90% relative humidity
noncondensing
Safety: EN 60950, UL 60950
Transportability: desktop equipment
Electromagnetic EN 55022 Class B
compatibility: EN 55024
EN 61000-3-2
EN 61000-3-3
Transportation: IE C 68-2-31, IE C 68-2-32
Please visit our website at www.faroudja.com
750 Palomar Avenue • Sunnyvale • CA 94085 • Phone: (408)735-1492
Fax: (408)735-1571 • Email: sales@faroudja.com
A division of Genesis Microchip Inc.