Fantom Vacuum CV242H User Manual

Stainless Steel Canister Vacuum

Item # XDB242H

for Model CV242H

10 HEPA Paper Bags 10 HEPA Paper Bags

Stainless Steel Canister Vacuum

Item # XDB242H

for Model CV242H

Warning: To reduce the risk of electric shock, the power cord

must be disconnected before changing the HEPA bag or performing maintenance/trouble shooting checks.

Changing the HEPA Bag:

1. To open the dust bag cover, remove the flexible hose and depress the dust bag cover release button. (Fig. 1)

2. Lift dust bag cover up by handle.

3. Holding the HEPA dust bag in your hand with the arrow pointing down, slide it firmly between the slots in the bag holder. (Fig 2)

4. Ensure that the cardboard face of bag rests securely in place. You will see the lever lock into place. (Fig. 3)

5. Replace dust bag cover. (Fig. 4)

Always remove the power plug from the wall outlet before assembling

Note:

or removing accessories.

Dust Bag Cover

Release Button

Fig. 1 Fig. 1

Caution: Make sure that the cardboard section of the dust bag is firmly in place inside the dust bag support. Caution: The dust bag compartment will not close if the dust bag is not inserted properly into the unit. Never use the vacuum without a dust bag inserted into the unit. NEVER reuse the paper dust bags.

Dust Bag

Holder

Fig. 2

Lever

Fig. 3

Fig. 4 Fig. 4