Fantasea Illuma 500 User Manual

Fantasea BlueRay Illuma Dive Light

(Cat. No. 6032)

Instruction Manual

The BlueRay Illuma Dive Light is a powerful,
durable and stylish waterproof light. It is a
perfect light for night dives, wreck diving
and as a modeling or focus light for
underwater photography. The IlIuma
features a wide, even beam, allowing for a
great angle of coverage and clear view
during the dive.
Color temperature of the light is designed to
reveal the true and vivid colors of fish and
underwater scenery. 2-level adjustable
power output enables controlling the intensity of the beam and extending burn time when
full power of the light isn’t required.
The light also features a stylish, lightweight and ergonomic design.
Depth rated to 100 meters/330 feet, the BlueRay Illuma Dive Light fulfills the needs of both
recreational and technical divers.

Specifications

 Depth ratio: 100 meters / 330 feet
 Maximum output: 400 lumens
 Beam angle: 75 degrees
 Material: Aluminum head, Polycarbonate body
 Battery requirements: 6 x AAA batteries
 Burn time:

o 60 minutes (100% power)
o 250 minutes (40% power)

 LED Lifespan: 30,000 hours
 Color temperature – approx. 6,000K
 Operation modes:

o 100% power
o 40% power

 Dimensions: 47 x 164mm (diameter x length)
 Weight: 145g (without battery)
 Includes: Hand lanyard and instruction manual
 Optional YS Mount available – BlueRay YS Mount A (Cat. No. 4028)
 Optional Red Filter available - RedEye Filter ORF47 (Cat. No. 5186)

1

Fantasea BlueRay Illuma Dive Light Instruction Manual 20121205

Instructions for Use

A. Installing & Removing Batteries

a. To open the BlueRay Illuma Dive Light, hold the hand grip firmly in one hand

with the hand grip pointing towards your body and the LED head pointing
away. Turn the LED head clockwise until it separates. Pull the LED head off.

Please make sure that the light is pointed in a slightly upward position so
the battery cartridge inside the light does not fall out when the light is
opened.

b. Take the battery cartridge out of the light by turning the body of the light

upside down. Make sure to grasp the battery cartridge as soon as it comes

out from the light so it doesn’t fall out.

c. Install or remove 6 x AAA batteries inside the battery cartridge. Make sure

to follow the instructions diagrams printed on the interior of the battery
cartridge. Note that there are three sets of two batteries, each set pointing
towards a different direction.

d. Install the battery cartridge back into the body of the light so that the end

with the round contacts faces the opening and towards the LED head.

e. Re-install the LED head on the opening, carefully aligning it with the thread

on the body of the light and tightening it evenly in a counterclockwise
fashion. Do not use force and do not allow it to screw down unevenly.
Tighten the LED head until the light goes on and then unscrew it clockwise a
bit, just enough for the light to turn off. Once the light is turned off, do not

continue turning the LED head, or else the watertight seal of the light may
be affected and possible flooding may result.

f. Take special care not to stare into the light beam or shine it into the eyes of

anyone else, because the light is powerful and could damage ones’ eyes.

g. It is recommended to occasionally apply a slight amount of silicone grease to

the black O-ring seal found below the threads of the body of the light prior
to replacing the LED head.

B. Turning the BlueRay Illuma Dive Light On/Off

a. In order to switch the light on, hold the hand grip firmly in one hand with

the hand grip pointing towards your body and the LED head pointing away.
Carefully turn the LED head counterclockwise all the way to the end.

b. In order to switch the light back off, turn the LED head in a clockwise fashion

just enough for the light to turn off.

2

Fantasea BlueRay Illuma Dive Light Instruction Manual 20121205