Fantasea G Series RedEye Filter User Manual

Fantasea Canon G Series Adaptors & Filters

Important Notice

This instruction manual relates to the EyeDaptor G Series-F67, RedEye Filter G
Series and PinkEye Filter G Series. Please refer to corresponding paragraphs

below for relevant instructions.

EyeDaptor G Series-F67

RedEye Filter G Series

PinkEye Filter G Series

67mm Add-On Plate

EyeDaptor G Series

EyeDaptor G Series

EyeDaptor G Series

RedEye Insert

PinkEye Insert

6 x Screws

Secure Line

Secure Line

Screwdriver

Snap Cord

Snap Cord

Secure Line

EyeDaptor G Series

67mm Add-On Plate

PinkEye/RedEye Inserts

1. Introduction

 EyeDaptor G Series-F67 (Cat. No. 4701) – Enables mounting 67mm threaded accessory lenses and filters

on Canon G Series housings. Specially designed to allow mounting the SharpEye Macro Lens M67 (Cat.

No. 5128) on Canon G Series housings lens ports.

 RedEye Filter G Series (Cat. No. 5201) – Red color correction filter for Canon G Series housings. Used to

restore the red color absorbed by blue water and allows for producing vivid and colorful underwater
images and videos.

 PinkEye Filter G Series (Cat. No. 5303) - Pink (magenta) color correction filter for Canon G Series

housings. Used to restore the pink color absorbed by green water and allows for producing vivid and
colorful underwater images and videos.

(Cat. No. 4701, 5201, 5303)

Instruction Manual

2. Included in Packaging

3. Identification of Parts

1

Canon G Series Adaptors & Filters Instruction Manual 2011016

Important Notice

Please use the utmost care and do not use excessive force when assembling and
disassembling the different accessories, in order to not cause any damage to the
product.

Image #4

Image #5

Image #1

Image #2

Image #3

4. Compatibility

The EyeDaptor G Series-F67, RedEye Filter G Series and PinkEye Filter G Series are compatible with the
Canon G10 Housing (WP-DC28) and the Canon G11/G12 Housing (WP-DC34).

5. Instructions for Use

1. Assembling the EyeDaptor G Series-F67
a. Place the EyeDaptor G Series on a flat and protected surface, so that the adaptor configuration is

facing up and the flat side of the adaptor is facing down (image #1).

b. Remove the 4 screws holding the 2 stoppers by using the screwdriver included (image #2).
c. Turn the EyeDaptor G Series upside down and remove the 2 stoppers off the adaptor (image #3).

d. Place the 67mm Add-On Plate on a flat and protected surface, so that the thread is facing down and

the concaved side of the plate is facing up (image #4).

e. Place the EyeDaptor G Series over the 67mm Add-On Plate so that the adaptor configuration is

facing up and the flat side of the adaptor is facing the 67mm Add-On Plate (image #5).

2

Canon G Series Adaptors & Filters Instruction Manual 2011016