Fantasea BlueRay Extreme Instruction Manual

1

Fantasea BlueRay Extreme Video Light Instruction Manual 20121206

Fantasea BlueRay Extreme Video Light

(Cat. No. 6037)

Instruction Manual

The BlueRay Extreme Video Light is a durable,
powerful and advanced video light, designed
to significantly enhance color and light in
underwater videos. It is made of aluminum
and features an ultra-durable construction.
With an average burn time of 120 minutes per
set of batteries, the BlueRay Extreme Video
Light can be trusted even during the longest
dives. Powered by standard AA batteries,
there is no need to charge the light in
between dives.
The light makes use of 3 x 3 watt LEDs, which
provide a bright, even and wide output. A 3-level adjustable power output allows controlling the
intensity of the beam in various compositions and diving conditions, as well as extending the burn
time of the light. Flashing and SOS modes can be used for signal purposes above and below the
surface. A YS Mount is included with the light, which is compatible with any standard YS connector.
Color temperature of the beam is warm and assists with producing vivid and colorful videos without
having to use any color correction filters on the camera lens. Depth rated to 100 meters/330 feet,
the BlueRay Extreme Video Light fulfills the needs of both recreational and technical divers.

Specifications

 Depth ratio: 100 meters / 330 feet
 Maximum output: 500 lumens
 Material: Aluminum
 Battery requirements: 4 x AA batteries
 Burn time: approx. 120 minutes
 LED Lifespan: 50,000 hours
 Color temperature – approx. 8,500K
 Color filter mount: M58
 Operation modes: 100% / 50% / 25% power, flashing signal and SOS signal
 Dimensions: 62 (W) x 62 (D) x 139 (H) mm
 Weight: 355.5g (without batteries)
 Includes: YS Mount, Hand lanyard and instruction manual

 Optional Red Filter available - RedEye Filter M58 (Cat. No. 5187)

2

Fantasea BlueRay Extreme Video Light Instruction Manual 20121206

Identification of BlueRay Extreme Video Light Parts

LED Head

M58 Thread for Color Filters

YS Mount

Rear Cap

Power Switch

Hand Lanyard Insert Slot

Instructions for Use

A. Installing & Removing Batteries

a. To open the rear cap of the BlueRay Extreme Video Light, hold the LED head firmly

in one hand with the LED head pointing towards your body and the YS Mount
pointing away. Turn the rear cap with the YS Mount clockwise until it separates.
Gently remove the rear cap by pulling it out with the YS Mount attached to it.

b. Take the battery cartridge out of the light by turning the body of the light upside

down. Make sure to grasp the battery cartridge as soon as it comes out from the

light so it doesn’t fall out.

c. Install or remove 4 x AA batteries inside the battery cartridge. Make sure to follow

the instructions diagrams printed on the interior of the battery cartridge. Note that
each battery should be installed inside the battery cartridge pointing towards a
different direction.

1 2 2 3 4 5 3

4

5

1 2 6

6