We at Faleemi are committed to do our part in protecting our environment. In
this continuing effect, we have supplied the detailed manuals, documentation,
software, troubleshooting and video guides on our website.
www.faleemi.com/support
Page 2
Dear Customer,
Thank you for choosing Faleemi among all the brands. We hope our products will protect
your home and give you peace of mind.
At Faleemi, we tly care about our customers’ Purchase Exerience and User Exerience,
so “Customer satisfaction garanteed is our goal”. We are 100% dedicated to your
complete satisfaction.
If your exerience has been something less than amazing, or need additional
The device is receiving the WiFi signal or connecting to the WiFi
The device is connected to the network
The device is reset to restore to factory default
The device failed to connect to the network
FSC776B
Speaker
DC 5V Power
Download the Faleemi APP (Android / iOS) before doing the setup
Connect your mobile device to your WiFi and download the App “Faleemi” from the App Store or
Google Play store, or scan below QR code to download it.
Before configuring your camera, please read the points below.
NOTE
Please make sure the camera is in the same room, close to the router, before performing the
setup. You can relocate it to where you want after it is all set up. You just unplug it and move it to
the new location and plug it in, the camera will connect to your WiFi automatically, no need to set
it up again.
Please
make sure your phone is connected to your
WiFi)
before doing the setup. Your 2.4GHz WiFi name (SSID) must be different from your
2.4GHz WiFi (not cellular data and 5GHz
5.0GHz one.
Please make sure your WiFi name and password do not have the special characters " &"
and " '"(apostrophe).
If you are not sure, please go to your router settings to find this out.
Note: THIS WILL NOT AFFECT THE 5GHz WIFI USE OF YOUR OTHER WIRELESS DEVICES : )
If you don’t know how to go to your router settings, please visit our website
If you don’t see the blue light , please do a “Factory Reset”. This process is outlined on
Page 30 of this manual. [“7. How to reset your camera (restore to factory default)?”].
Now, please follow below instructions to get your camera set up.
.
0202
Page 4
Note: when the camera is s tartup,
it will sound one
HD Pan/Tilt WiFi Security IP Camera
Model: FSC776B/W
Setup Option A: WPS/QSS Button Setup
Please check if your WiFi router has a “WPS/QSS” button or a WPS icon (See below picture).
Please check your router’s top, 2 sides, back or bottom. If you find it, please follow below steps to
do the setup.
If you don't find it, there are still 2 options for you to set up the camera.
Please turn to
NOTE
WPS: Wi-Fi Protected Setup (Wi-Fi Simple Config) is a network security standard to create a secure
wireless home network, The standard emphasizes usability and security.
Page 9 for Setup Option C: Add cameras via WiFi configuration guide.
or
Page 5 for Setup Option B: One Key WiFi Setup
Quick Start Guide
2. Please press down the reset button for
about 3~5 seconds and then let it go.
CAUTION: The button is
small. Holding for longer
than 10 seconds will reset
the camera.
3. When you see the solid blue light ,
please press the WPS button for 3 seconds
on your router before 30 seconds has passed.
Setup Option B
Solid Light
You will see the blue light on the camera
blinking very fast and then hear 2 Beep.
Setup Option A
WPS Button
WPS Icon
The camera is connecting to your WiFi.
Beep
Beep
1. Please put your camera close to your
WiFi router and plug it in, you will hear
“Beep”. The camera is initializing by
rotating from left to right and up to down
and stop in center finally. And then you
will see the red and blue lights are
blinking slowly.
Note: when the camera is startup,
03
it will sound one
“Beep”
And then you will see the blue light turns on,
solid and steady (not blinking).
Press down
WPS/Reset
Button
3~5s
4. Wait for around 30 seconds until you see
the blue light is flashing slowly again.
And follow Page 7 to add the camera to
your mobile/tablet Faleemi APP.
04
Page 5
Note:
When
click on "
Configuration" "
button. Your phone will make a loud
sound to transmit the data to the camera.
Click on it to make sure your
Note: when the camera is s tartup,
it will sound one
HD Pan/Tilt WiFi Security IP Camera
Setup Option B: One Key WiFi
1. Please put your camera close to your
WiFi router and plug it in, you will hear
“Beep”. The camera is initializing by
rotating from left to right and up to down
and stop in center finally. And then you
will see the red and blue lights are
blinking slowly.
Model: FSC776B/W
2. Open the Faleemi App, click on the menu
icon
[More] , Click on[One key WiFi].
Quick Start Guide
3. Enter your 2.4GHz WiFi password,
Click on
[Configuration].
Note:
When
click on "
button. Your phone will make a loud
sound to transmit the data to the camera.
Configuration
4. After the configuration is succeeded,
the camera will sound with 2 Beeps.
Beep
Beep
Setup Option B
5 mins
NOTE
If you don’t do the setup in 5 mins, please
unplug the camera and plug it in again to
get another 5 mins setting time.
05
Note: when the camera is startup,
it will sound one
“Beep”
Only when it blinks red and blue
slowly , should you start
to do the setup. It lasts only 5 mins
after the camera is powered up.
Click on it to make sure your
WiFi password is correct.
Put your phone
close to
the camera
Setup Option B
Troubleshooting
1. If you see the blue light goes off instead of
solid on, the WiFi password you just input may
be wrong. Please reset the camera (instructions
in Page 30) and do the setup again.
2. If your WiFi password was correct but still
failed, the WiFi you were connected may be
5GHz WiFi.
3. If all your WiFi and password were correct, it is
still failed, there may be the special characters
apostrophe (‘) and ampersand (&) in your WiFi
SSID or password.
5. And follow Page 7 to add the camera to
your mobile/tablet Faleemi APP.
06
Page 6
1. To ensure the security of your camera,
you
are suggested changing the default password.
Please refer to the instruction in
.
2. You can relocate the camera now. Please just
unplug it and move it to the new location and
plug it in, the camera will connect to your WiFi
automatically, no need to set it up again.
* But please make sure the new location will be
not far from your router.
Congratulations!
Your camera is connected now
You will see it says the camera is Online.
If you don’t find it, Please Make sure your
phone is connected to your WiFi
(not cellular data) and click on this icon to
refresh.
Please use th e default username of
admin
and password o f
123456
here.
You can change them w hen the camera is all se t up.
You will find the ins tructions in
.
HD Pan/Tilt WiFi Security IP Camera
Model: FSC776B/W
Quick Start Guide
Add the connected camera to Faleemi App
*Please make sure the phone is connected to the same WiFi as the camera you’ve connected to.
1. Click on[Add Camera].3. Click on [LAN Search].
2. Click on[Add the cameras which are
already connected to your WiFi network].
Add Camera
07
4. Click on the camera searched.
If you don’t find it, Please Make sure your
phone is connected to your WiFi
(not cellular data) and click on this icon to
refresh.
5. Give your camera a name, and put the
default password (123456), click on [ ].
Faleemi
VIEW-1234567-ABCDE
123456
Please use the default username of
admin
and password of
You can change them when the camera is all set up.
You will find the instructions in
123456
Page 28
here.
6. You will see it says the camera is Online.
Congratulations! Your camera is all set up.
Click on the imageto enjoy viewing and
controlling it now.
You will see it says the camera is Online.
Congratulations!
Your camera is connected now
1. To ensure the security of your camera,
are suggested changing the default password.
Please refer to the instruction in
2. You can relocate the camera now. Please just
unplug it and move it to the new location and
plug it in, the camera will connect to your WiFi
automatically, no need to set it up again.
* But please make sure the new location will be
not far from your router.
Page 28
you
Add Camera
08
Page 7
If you see this, please click on
If you can’t scan the QRcode,
please Click on
Note: when the camera is s tartup,
it will sound one
HD Pan/Tilt WiFi Security IP Camera
Model: FSC776B/W
Setup Option C: Add cameras via WiFi configuration guide
Quick Start Guide
1.
Please put your camera close to your
WiFi router and plug it in, you will hear
“Beep”. The camera is initializing by
rotating from left to right and up to down
and stop in center finally. And then you
will see the red and blue lights are
blinking slowly.
Setup Option C
Router
09
Note: when the camera is startup,
it will sound one
“Beep”
2.4GHz
Plug
Only when it blinks red and blue
slowly , should you start
5 mins
NOTE
to do the setup. It lasts only 5 mins
after the camera is powered up.
If you don’t do the setup in 5 mins, please
unplug the camera and plug it in again to
get another 5 mins setting time.
2. Open the Faleemi App,
click on [Add Camera].
3. Click on[Add cameras via WiFi
configuration guide].
4. Please scan the QR Code at the bottom of
the camera.
QR Code
If you see this, please click on
If you can’t scan the QRcode,
please Click on
[OK]
[Skip]
Setup Option C
10
Page 8
if you can't scan the QR code, please enter the
DID (something like
VIEW-1234567-ABCDE)
in the label on the camera manually.
Please use th e default username of
admin
and password o f
123456
here.
You can change them w hen the camera is all se t up.
You will find the ins tructions in
.
Note: Please click on "
" button.
Your phone will make a loud sound to
transmit the data to the camera.
Click on it to make sure your
HD Pan/Tilt WiFi Security IP Camera
Model: FSC776B/W
Quick Start Guide
5. Click on [The blue light is flashing
slowly].
Setup Option C
11
camera and click on [Next].
123456
Please use the default username of
admin
and password of
You can change them when the camera is all set up.
if you can't scan the QR code, please enter the
DID (something like
You will find the instructions in
in the label on the camera manually.
123456
here.
Page 28
VIEW-1234567-ABCDE
7. Input your WiFi password and click on
8. Click on[Start].6. Type in the name you have selected for your
[Connect to WiFi].
Setup Option C
Click on it to make sure your
Note: Please click on "
Your phone will make a loud sound to
transmit the data to the camera.
Start" button.
WiFi password is correct.
12
Page 9
When you call us, please wait some more
moment until we pick up the phone.
You will see it says the camera is Online.
Whe n the came ra re ceives the W iFi
sig nal, it will soun d wit h 2 b eeps.
Whe n the conn ectio n is succes sful, i t
wil l tak e you to th e camera p age.
1. To ensure the security of your camera,
you
are suggested changing the default password.
Please refer to the instruction in
.
2. You can relocate the camera now. Please just
unplug it and move it to the new location and
plug it in, the camera will connect to your WiFi
automatically, no need to set it up again.
* But please make sure the new location will be
not far from your router.
Congratulations!
Your camera is connected now
HD Pan/Tilt WiFi Security IP Camera
Model: FSC776B/W
Quick Start Guide
9. Connect to WiFi.
Setup Option C
13
When the camera receives the WiFi
signal, it will sound with 2 beeps.
When the connection is successful, it
will take you to the camera page.
10.You will see it says the camera is Online.
Congratulations! Your camera is all set up.
Click on the imageto enjoy viewing and
controlling it now.
You will see it says the camera is Online.
Congratulations!
Your camera is connected now
1. To ensure the security of your camera,
are suggested changing the default password.
Please refer to the instruction in
2. You can relocate the camera now. Please just
unplug it and move it to the new location and
plug it in, the camera will connect to your WiFi
automatically, no need to set it up again.
* But please make sure the new location will be
not far from your router.
Page 28
you
If the setting is failed, please find
below solution or contact us by
solid on, the WiFi password you just input
may be wrong. Please reset the camera
(instructions in
again.
Page 30) and do the setup
2. If your WiFi password was correct but still
failed.
(a). Please make sure your phone is connected
to your 2.4GHz WiFi (not 5GHz WiFi) before
doing the setup.
(b). Your 2.4GHz WiFi name (SSID) must be
different from your 5.0GHz one.
(c). Please sure your WiFi name and password
do not have the special characters " & " and
" ' "(apostrophe).
If you are not sure, please go to your router
settings to find this out.
If you don’t know how to go to your router
settings, please visit our website