Falcon PREDATOR EVO3 Owner's Manual

1

FALCON

WOR LD CLASS SE CUR ITY

FALCON PREDATOR EVO3

2 Way Security System

Owner’s Manual

HELPLINE: 0906 700 10 20

(All calls charged at 50p/min)

Falcon Security Ltd. Unit 9 Tanning Court, Warrington, Cheshire, WA1 2HF, UK

Internet: http://www.falcon-security.com

Email: [e-mail]

2

1) Main Features

01>

Hopping code data transmission

02> Includes Two Way remote control
02> Power Saving transmitter
04> Code learning microprocessor
05> Dual stage Shock Sensor
06> 5-separate trigger zones
07> 1 Auxiliary sensor port
08> 2 Auxiliary output ports
09> Compatible with all types of

Central Lock System

10> Compatible with dual stage

Central Lock System

11> 2-Way FM/AM transmission up to

1000/350 meters

12> Instant alert by buzzer or

vibration

13> Panic/Anti-Hijacking mode
14> 10 programmable features

2) LED Status Indicator
Slow flash

: Arm / Alarm / Panic / Anti-hijack

Fast flash

: Auto Re-arm

Steady flash

: Last door arm / send message to controller

No light

: Disarm mode

Note: Alarm will not accept the commands when sending a message to the controller.

3) Remote Control

01. Table of button functions

Button IGN OFF IGN On

BTN #1 once Arm/Disarm Lock/Unlock
BTN #1 2 sec. Panic Panic
BTN #2 once Channel 2 output Channel 2 output
BTN #3 once Vehicle Finder Anti-hijacking(1)
BTN #3 2 sec. Anti-hijacking(2)
BTN #1+2 then BTN #1 Mute Arm Mode
BTN #1+2 then BTN#1+2 Valet mode
BTN #2+3 once Boot release Boot release
BTN #1+2 then BTN#2 Channel #3 output Channel 2 output
BTN #2+4 once RC battery saving RC battery saving
BTN#3+4 Vibration mode Vibration mode
BTN #5 Once Flash Light Flash Light

3

02. Battery Saving
a) Pressing button #2+4 once will start the battery saving mode and the buzzer

will sound to confirm. The remote control will enter battery saving mode 70sec.
after pressing button #1 to disarm the system. Pressing any button during the
70 sec. or while under in battery saving mode will deactivate the battery saving
mode till next time the system is disarmed.

b) Under battery saving mode, pressing button #2+4 once again will turn off the

battery saving mode and the buzzer will sound to confirm.

03. Vibration and Audible Mode
Pressing button #3+4 once under any mode will switch between vibration or
audible mode.

04. Flash Light
Press and hold button #5 for one second will turn on the flash light for as long as
button #5 is pressed.

05. Powering on the LED Remote Control
When inserting the battery the buzzer of LED remote will sound and then the
blue/red/green LED and white flash light will flash for 0.5 sec. alternately.

06. Blue LED
* Press any button except button #5 and the blue LED will flash for 0.5sec. and the

battery power will be checked at the same time

* Insufficient Battery power is indicated by:

- Blue LED flashes 3 sec. then off

- Buzzer sounds four times

07. Red LED
a) When the system is armed the remote control will beep once and the red LED

flash 15 sec. to confirm.

b) When the system is disarmed, the LED remote will beep two times and the red