Falcon G1006BX, G1016X/2, G1006X, G1016X, G1006FX User Instruction

T100628 Ref. 1

GAS CHIEFTAIN RANGES,
BOILING TABLES and OVENS

USERS INSTRUCTIONS

SECTION 1 - GENERAL DESCRIPTION
SECTION 2 - LIGHTING and OPERATIONS
SECTION 3 - COOKING HINTS
SECTION 4 - CLEANING and MAINTENANCE

These Appliances have been CE-marked on the basis of compliance with the Gas Appliance Directive
for the Countries, Gas Types and Pressures as stated on the Data Plate.

These Appliances MUST BE installed by a competent person in compliance with the INSTALLATION AND
SERVICING INSTRUCTIONS and National Regulations in force at the time. Particular attention MUST be paid
to the following:

Gas Safety (Installation & Use) Regulations
Health and Safety at Work Act

Furthermore, if a need arises to convert the Appliance for use with another gas, a competent person must be
consulted. Those parts which have been protected by the manufacturer MUST NOT be adjusted by the User.

Users should be conversant with the appropriate provisions of the Fire Precautions Act and the requirements of
the Gas Safety Regulations. in particular the need for regular servicing by a competent person to ensure the
continued safe and efficient performance of the Appliance.

WARNING - TO PREVENT SHOCKS, ALL APPLIANCES WHETHER

GAS OR ELECTRIC, MUST BE EARTHED

Upon receipt of the User's Instruction manual, the installer should instruct the responsible person(s) of the
correct operation and maintenance of the Appliance.

This equipment is ONLY FOR PROFESSIONAL USE, and shall be operated by QUALIFIED persons. It is the
responsibility of the Supervisor or equivalent to ensure that users wear SUITABLE PROTECTIVE CLOTHING
and to draw attention to the fact that, some parts will, by necessity, become VERY HOT and will cause burns if
touched accidentally.

At end of unit life, dispose of appliance and any replacement parts in a safe manner, via a licenced waste
handler. Units are designed to be dismantled easily and recycling of all material is encouraged whenever
practicable.

WEEE Directive Registration No. WEE/DC0059TT/PRO

At end of unit life, dispose of appliance and any replacement parts
in a safe manner, via a licenced waste handler.

Units are designed to be dismantled easily and recycling of all
material is encouraged whenever practicable.

Falcon Foodservice Equipment

HEAD OFFICE AND WORKS

Wallace View, Hillfoots Road, Stirling. FK9 5PY. Scotland.

SERVICELINE CONTACT -

PHONE - 01438 363 000 FAX - 01438 369 900

SECTION 1 - GENERAL DESCRIPTION

1.1 Control Knob Details
G1006X Open Top Range

Open Top Taps

Oven Flame Failure

Gas Control
Piezo
Unit
(Inside) Oven Thermostat

Bottom Front Panel

G1006BX Solid Top Range

Solid Top Tap

Oven Flame Failure

Gas Control
Piezo
Unit
(Inside) Oven Thermostat

Bottom Front Panel

G1006FX Twin Bullseye Range

Solid Top Taps

Oven Flame Failure

Gas Control
Piezo
Unit
(Inside) Oven Thermostat

Bottom Front Panel

G1066X Open Top Range

Open Top Taps

Oven Flame Failure

Gas Control
Piezo
Unit
(Inside) Oven Thermostat

Bottom Front Panel

G1026X Open Top Boiling Table

Open Top Taps

G1026BX Solid Top Boiling Table

Solid Top
Flame Failure
Gas Tap

G1060X Open Top Boiling Table

Open Top
Taps

G1016X Single Tier Oven

Oven Flame
Failure
Gas Control

Piezo Unit
(Inside)

Oven
Thermostat

Bottom Front
Panel

G1016X/2 Double Tier Oven

Oven Flame
Failure Gas

Control

Piezo Unit
(Inside) Oven

Thermostat

Bottom Front
Panel

SECTION 2 LIGHTING AND OPERATIONS
LIGHTING THE BURNER

2.1 Open Top Burners

All taps incorporate a flame failure facility.
The burners are of equal power and the tap which
controls a specific burner is identified by the icon
adjacent to the tap. See Figures 1 and 2.

Rear Left Front Left Front Right Rear Right

Figure 1 - G1006X and G1026X Open Top

Rear Front Rear Front Front Rear
Left Left Centre Centre Right Right

Figure 2 - G1066X and G1060X Open Top

To Light A Burner

Turn control knob to full flame position. Push knob in
fully and apply a lit taper to burner. Continue to hold
knob in for 20 seconds before release. Observe that
burner remains lit.

If burner fails to light, wait 3 minutes and repeat.

To Extinguish The Burner

Turn tap fully clockwise to OFF position.

Using The Open Top

The open top burner can support pot sizes of 220mm
to 460mm diameter.