Fairchild NC7SZ126 service manual

®
®
TinyLogic
September 2009
UHS Buffer with Three-State Output
NC7SZ126 — TinyLogic
UHS Buffer with Three-State Output
Features
Ultra-High Speed: t
5V V
CC
High Output Drive: ±24mA at 3V VBroad V
Operating Range: 1.65V to 5.5V
CC
2.6ns (Typical) into 50pF at
PD
CC
Matches Performance of LCX Operated at 3.3V VPower Down High-Impedance Inputs/Outputs Over-Voltage Tolerance Inputs Facilitate 5V to 3V
Translation
Proprietary Noise/EMI Reduction Circuitry Ultra-Small MicroPak™ Packages
Description
The NC7SZ126 is single buffer with three-State output from Fairchild’s Ultra-High Speed (UHS) series of TinyLogic CMOS technology to achieve ultra-high speed with high output drive while maintaining low static power dissipation over a broad V
CC
device is specified to operate over the 1.65V to 5.5V V
CC
impedance above ground when V tolerate voltages up to 6V, independent of V operating voltage. The output tolerates voltages above V
CC
®
. The device is fabricated with advanced
CC
operating range. The inputs and output are high
in the 3-State condition.
Space-Saving SOT23 and SC70 Packages
Ordering Information
Part Number Top Mark
NC7SZ126M5X 7Z26 RoHS 5-Lead SOT23, JEDEC MO-178 1.6mm
NC7SZ126P5X Z26 RoHS 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide
NC7SZ126L6X FF RoHS 6-Lead MicroPak™, 1.00mm Wide
NC7SZ126FHX FF Green
Eco Status
6-Lead, MicroPak2, 1x1mm Body, .35mm Pitch
Package Packing Method
operating range. The
is 0V. Inputs
CC
CC
3000 Units on
Tape & Reel
3000 Units on
Tape & Reel
5000 Units on
Tape & Reel
5000 Units on
Tape & Reel
For Fairchild’s definition of Eco Status, please visi t: http://www.fairchildsemi.com/company/green/rohs_green.html.
© 1996 Fairchild Semiconductor Corporation www.fairchildsemi.com NC7SZ126 • Rev. 1.0.3
®
Connection Diagrams
Pin Configurations
NC7SZ126 — TinyLogic
Figure 1. Logic Symbol
UHS Buffer with Three-State Output
Figure 2. SC70 and SOT23 (Top View) Figure 3. MicroPak (Top Through View)
Pin Definitions
Pin # SC70 / SOT23 Pin # MicroPak Name Description
1 1 OE Input 2 2 A Input 3 3 GND Ground 4 4 Y Output 5 6 VCC Supply Voltage
5 NC No Connect
Function Table
Inputs Output
OE A Out Y
H L L H H H
L X Z
H = HIGH Logic Level L = LOW Logic Level X = HIGH or LOW Logic Level Z = HIGH Impedance State
© 1996 Fairchild Semiconductor Corporation www.fairchildsemi.com NC7SZ126 • Rev. 1.0.3 2
®
NC7SZ126 — TinyLogic
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only.
Symbol Parameter Min. Max. Unit
VCC Supply Voltage -0.5 6.0 V
VIN DC Input Voltage -0.5 6.0 V
V
DC Output Voltage -0.5 6.0 V
OUT
IIK DC Input Diode Current
IOK DC Output Diode Current
I
DC Output Current ±50 mA
OUT
ICC or I
DC VCC or Ground Current ±50 mA
GND
T
Storage Temperature Range -65 +150 °C
STG
VIN < -0.5V -50 V
> 6.0V +20
IN
V
< -0.5V -50
OUT
V
> 6V, VCC=GND +20
OUT
TJ Junction Temperature Under Bias +150 °C TL Junction Lead Temperature (Soldering, 10 Seconds) +260 °C
SOT-23 200
PD Power Dissipation at +85°C
SC70-5 150 MicroPak-6 130 MicroPak2-6 120
ESD
Human Body Model, JEDEC:JESD22-A114 4000 Charge Device Model, JEDEC:JESD22-C101 2000
mA
mA
mW
V
UHS Buffer with Three-State Output
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol Parameter Conditions Min. Max. Unit
VCC
VIN Input Voltage 0 5.5 V
V
OUT
TA Operating Temperature -40 +85 °C
tr, tf Input Rise and Fall Times
θ
JA
Note:
1. Unused inputs must be held HIGH or LOW. They may not float.
© 1996 Fairchild Semiconductor Corporation www.fairchildsemi.com NC7SZ126 • Rev. 1.0.3 3
Supply Voltage Operating 1.65 5.50 Supply Voltage Data Retention 1.50 5.50
Output Voltage
Active State 0 VCC Three-State 0 5.5
VCC=1.8V, 2.5V ± 0.2V 0 20 VCC=3.3V ± 0.3V 0 10
=5.0V ± 0.5V 0 5
V
CC
SOT-23 300
Thermal Resistance
SC70-5 425 MicroPak-6 500 MicroPak2-6 560
V
V
ns/V
°C/W
Loading...
+ 7 hidden pages