Fairchild NC7SV17 service manual

®

NC7SV17

NC7SV17 — TinyLogic

December 2010

TinyLogic® ULP-A Single Buffer with Schmitt Trigger Input

Features



0.9V to 3.6V V

Supply Operation

CC

 3.6V Over-Voltage Tolerant I/Os at VCC from

0.9V to 3.6V

 Extremely High Speed tPD

- 1.5ns: Typical for 2.7V to 3.6V V

- 1.8ns: Typical for 2.3V to 2.7V V

- 2.0ns: Typical for 1.65V to 1.95V VCC

- 3.2ns: Typical for 1.4V to 1.6V V

- 5.9ns: Typical for 1.1V to 1.3V V

- 12.0ns: Typical for 0.9V V

CC

CC CC

 Power-Off High-Impedance Inputs and Outputs  High Static Drive (I

- ±24mA at 3.00V V

- ±18mA at 2.30V V

- ±6mA at 1.65V V

- ±4mA at 1.4V V

- ±2mA at 1.1V V

- ±0.1mA at 0.9V V

OH/IOL

CC CC

CC CC CC

CC

)

 Uses Proprietary Quiet Series™ Noise/EMI

Reduction Circuitry

 Ultra-Small MicroPak™ Packages  Ultra-Low Dynamic Power

Description

The NC7SV17 is a single buffer with Schmitt trigger input from Fairchild's Ultra-Low Power (ULP-A) Series of TinyLogic require extreme high speed, high drive, and low power. This product is designed for a wide low-voltage operating range (0.9V to 3.6V V require more drive and speed than the TinyLogic series, but still offer best-in-class, low-power operation.

The NC7SV17 is uniquely designed for optimized power and speed and is fabricated with an advanced CMOS technology to achieve high-speed operation while maintaining low CMOS power dissipation.

®.

ULP-A is ideal for applications that

) and applications that

CC

®

ULP

ULP-A Single Buffer with Schmitt Trigger Input

Ordering Information

Part Number Top Mark Package Packing Method

NC7SV17P5X V17 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide

NC7SV17L6X G5 6-Lead MicroPak™, 1.00mm Wide

NC7SV17FHX G5 6-Lead, MicroPak2™, 1x1mm Body, .35mm Pitch

TinyLogic® is a registered trademark of Fairchild Semiconductor Corporation. MicroPak™ and Quiet Series™ are trademarks of Fairchild Semiconductor Corporation.

3000 Units on

Tape & Reel

5000 Units on

Tape & Reel

5000 Units on

Tape & Reel

®

A

Battery Life

(Days)

Figure 1. Battery Life vs. V

700 600 500 400 300 200 100

0

ULP (SP)

ULP-A (SV)

0.9 1.2

UHS (SZ )

1.5 1.8 2.5 3.3 5.0 SupplyVoltage

V

CC

Supply Voltage

CC

NC7SV17 — TinyLogic

ULP-A Single Buffer with Schmitt Trigger Input

Notes:

1. TinyLogic Battery Life = (V where, P

®

ULP and ULP-A with up to 50% less power consumption can extend battery life significantly.

device

battery•Ibattery

= (I

CC

• V

CC

•.9)/(P

) + (C

PD

+ C

)/24hrs/day

device

) • V

L

CC2

• f.

2. Assumes ideal 3.6V Lithium Ion battery with current rating of 900mAH and derated 90% and device frequency at 10MHz, with C

=15pF load.

L

Connection Diagram

IEEE/IEC

1

Y

Figure 2. Logic Symbol

®

Pin Configurations

NC7SV17 — TinyLogic

NC

A

GND

Figure 3. SC70 (Top View) Figure 4. MicroPak™ (Top Through View)

Pin Definitions

Pin # SC70 Pin # MicroPak Name Description

1 1 NC No Connect 2 2 A Input 3 3 GND Ground 4 4 Y Output 5 6 VCC Supply Voltage

5 NC No Connect

1

2

3 4

5

V

CC

Y

NC

GND

1

2

A

3

6

V

CC

5

NC

4

Y

ULP-A Single Buffer with Schmitt Trigger Input

Function Table

H=HIGH Logic Level L=LOW Logic Level

Inputs Output

A Y

L L

H H

®

NC7SV17 — TinyLogic

Absolute Maximum Ratings

Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only.

Symbol Parameter Min. Max. Unit

VCC Supply Voltage -0.5 4.6 V

VIN DC Input Voltage -0.5 4.6 V

(3)

V

DC Output Voltage

OUT

HIGH or LOW State VCC=0V -0.5 4.6

IIK DC Input Diode Current VIN < 0V -50 mA

< 0V -50

V

IOK DC Output Diode Current

I

DC Output Source/Sink Current ±50 mA

OH/IOL

ICC or I

DC VCC or Ground Current per Supply Pin ±50 mA

GND

T

Storage Temperature Range -65 +150 °C

STG

OUT

V

> VCC +50

OUT

TJ Junction Temperature Under Bias +150 °C TL Junction Lead Temperature, Soldering 10 Seconds +260 °C

SC70-5 150

PD Power Dissipation at +85°C

MicroPak2™-6 120

ESD

Human Body Model, JEDEC:JESD22-A114 4000 Charge Device Model, JEDEC:JESD22-C101 2000

Note:

3. IO absolute maximum rating must be observed.

-0.5 VCC + 0.5 V

ULP-A Single Buffer with Schmitt Trigger Input

mA

mW MicroPak™-6 130

V

Recommended Operating Conditions

The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings.

Symbol Parameter Conditions Min. Max. Unit

VCC Supply Voltage 0.9 3.6 V

VIN Input Voltage 0 3.6 V

V

Output Voltage

OUT

IOH/IOL Output Current in IOH/IOL

TA Operating Temperature, Free Air -40 +85 °C

Δt/ΔV

θ

JA

Minimum Input Edge Rate V

Thermal Resistance

Note:

4. Unused inputs must be held HIGH or LOW. They may not float.

VCC=0V 0 3.6 HIGH or LOW State 0 VCC V

=3.0V to 3.6V ±24

CC

V

VCC=2.3V to 3.6V ±18 VCC=1.65V to 1.95V ±6 VCC=1.4V to 1.6V ±4

mA

VCC=1.1V to 1.3V ±2 VCC=0.9V ±0.1

=0.8V to 2.0, VCC=3.0V 10 ns/V

IN

SC70-5 425

°C/W MicroPak™-6 500

MicroPak2™-6 560