Factory Direct Hardware CT708EG User Manual
CT708E(G) & CT708EV(G)
Wall-Mounted Flushometer Toilet, 1.28GPF when used with
High Effi ciency Flushometer Valve
FEATURES
• Wall-mounted outlet
• Elongated front bowl
• Optional SanaGloss® ceramic glaze - SanaGloss
glaze prevents debris, and mold from sticking to
ceramic surfaces, leading to fewer chemicals and
less water in cleaning.
MODELS
• CT708E
Commercial wall-mounted toilet with 1-1/2' top
spud inlet, less seat
• CT708EG
Commercial wall-mounted toilet with 1-1/2' top
spud inlet, less seat with SanaGloss ceramic glaze
• CT708EV
Commercial wall-mounted toilet with 1-1/2' back
spud inlet, less seat
• CT708EVG
Commercial wall-mounted toilet with 1-1/2' back
spud inlet, less seat with SanaGloss ceramic glaze
• SC534 seat (sold separately)
• SC134 seat (sold separately)
• THU111 Retro-fi t mounting bolt cap set (4 pcs sold
separately)
FLUSHOMETER VALVES (sold separately)
Manual EcoPower
1.28 GPF 1.6 GPF
TMT1LN32#CP TMT1NNC-32
CT708ECT708EV
1.28 GPF 1.6 GPF
TET1LN32#CP TET1GNC-32#CP
TET6LN32#CP TET6GNC-32#CP
TET3LN#31#SS TET3GN#31#SS
TET2LN#31#SS TET2GN#31#SS
®
COLORS/FINISHES
• #01 Cotton
#03 Bone
#12 Sedona Beige
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1
• Certifi cations: IAPMO (cUPC), State of Massachusetts
, City of Los Angeles, and others
• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
• ADA Compliant
PRODUCT SPECIFICATION
The wall-mounted, low consumption siphon jet
fl ushing system toilet shall be 1.28GPF/4.8LPF
when paired with a 1.28GPF fl ushometer valve and
1.6GPF/6.0LPF when paired with 1.6GPF/6.0LPF
fl ushometer valve. Toilet shall have optional SanaGloss
ceramic glaze. Toilet can be mounted at ADA height.
Toilet shall be elongated front bowl. Toilet shall be
TOTO Model CT708E______.
CT708E(G) & CT708EV(G)
r
Wall-Mounted Flushometer Toilet, 1.28GPF when used
with High Effi ciency 1.28GPF Flushometer Valve
SPECIFICATIONS
• Water Use 1.28GPF/4.8LPF
(or 1.6GPF/6.0LPF when
used with 1.6GPF fl ush
valve)
• Flush System Siphon jet fl ushing action
• Min. Water Pressure 35 psi (fl owing)
• Min. Flow Rate 23 GPM
• Water Surface 12" x 9-1/4"
• Trap Diameter 2-1/8"
• Trap Seal 2-5/8"
• Warranty One Year Limited Warranty
• Material Vitreous china
• Shipping Weight CT708E(G) - 49lbs
CT708EV(G) - 53.5lbs
• Shipping Dimensions CT708E(G)
17-1/8"L x 16" W
CT708EV(G)
15-1/2"L x 15-1/2" W x 26-3/8"H
5-1/2"
(140mm)
2-3/4"
(70mm)
1/16"
(1.7mm)
Wall
Gap
*6-3/8"
(162mm)
Finished Wall (Must be flat surface)
18-1/ 2" (470mm)
24- 7/8" (632mm)
Finished Floor
(432mm)
*16"
(406mm)
*17"
12- 3/4"
(323mm)
x 26"H
*Suggested
Dimension
*4- 3/4"
(121mm)
15- 3/8" (390mm)
1-1/2"
(38mm)
CT708E(G)
1" N.P.T. supply fo
Flushometer valve
11-1/2"
(292mm)
2-3/8"
(59mm)
7-1/ 2"
(190mm)
Wall
1-3/4"
(45mm)
Standard
bolt cap
China China
Note: If carrier bolt doesn’t extend/or is
flush with china, then use retrofit caps
THU111 (sold separately).
Wall
Proper Installation
finished wall
Installation surface of bowl
has 1/16” wall gap
across entire surface.
Retrofit
bolt cap
5-1/2"
(140mm)
1/16"
(1.7mm)
Wall
Gap
11-1/4"
(285mm)
*6-3/8"
(162mm)
Finished Wall (Must be flat surface)
18-1/ 2" (470mm)
24- 7/8" (632mm)
Finished Floor
(432mm)
*16"
(406mm)
*17"
3-7/8"
(99mm)
*Suggested
Dimension
15- 3/4"* (400mm)
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
9"
(229mm)
CT708EV(G)
Improper Installation
finished wall
Ø Uneven Wall Gap
Top and Bottom mounting
surfaces must be in
3-1/2"
(90mm)
2-3/8" (59mm)
7-1/2"
12- 3/4"
(190mm)
(323mm)
9"
(229mm)
These dimensions and specifi cations are subject to change without notice
Printed in U.S.A. | © TOTO USA 09/11 | Printed on recycled paper ♻
the same vertical plane.
Baseboard
# SS-00210 v.06
Loading...