Factory Direct Hardware CT708E User Manual
CT708E/CT708EV
Flowing Pressure (psi)
Screw Adjustment (turn)
Flow Rate (Gpm)
5
10 15 20 25 30
10
15
20
25
30
35
ORIGINAL
POSITION
3/4 CCW
1/4 CCW
1/2 CCW
40
45
55
50
60
MINIMUM OPERATING
RANGE WITH SCREW
ADJUSTMENT
OPERATING RANGE
WITHOUT SCREW
ADJUSTMENT
Wall Hung Flushometer Toilet, 1.28GPF when
used with High Efficiency Flushometer Valve
■ Powerful siphon jet flush
■ Elongated rim
■ Low consumption (4.8Lpf/
1.28 Gpf or less/ when used
with High Efficiency
Flushometer Valve)
■ Available with performance
matched TOTO
Flushometer Valve.
Vitreous china wall hung
flushometer toilet with elongated
rim. Low consumption (4.8Lpf/
1.28 Gpf) siphon jet flush.
■ CT708E
1-1/2" top spud inlet, less seat.
■ CT708EV
1-1/2" back spud inlet, less seat.
®
CT708E - Wall Hung Flushometer Toilet
SC534 - Commercial Toilet Seat
TET1LN32#CP - 1.28GPF ECO EFV - Automatic Flushometer Valve
❏ SC534
Elongated, open front seat
less cover.
❏ SC134
Elongated, open front seat
with cover.
®
TOTO
wall hung toilets
require a supporting carrier
(supplied by others). Follow
carrier manufacturer’s
installation instructions.
Colors:
Standard #01 Cotton
Optional See price book for
Recommended flushometer valve:
TOTO
are highly recommended for maximum
performance.
additional colors
®
Manual and Electronic Flush Valves
CT708EV - Wall Hung Flushometer Toilet
SC534 - Commercial Toilet Seat
TET2LN32#SS - 1.28GPF ECO EFV - Automatic Flushometer Valve
(flush valve will launch in second half of 2008)
Reliance Commercial Line
CT708E/CT708EV
18-1/2" (470mm)
9"
(229mm)
2-3/4"
(70mm)
1
5-3/4" (400mm)
5-1/2"
(
140mm)
5-3/8"*
(135mm)
15"* (380mm)
12- 3/4" (323mm)
4-3/4"* (121mm)
11-1/2" (292mm)
2-3/8"(59mm)
7-1/2" (190mm)
1" N.P.T. supply for
Flushometer valve
Finished Wall (Must be flat surface)
Finished Floor
1-1/2" (38mm)
24- 7/8" (632mm)
18-1/2" (470mm)
24- 7/8" (632mm)
9
"
(229mm)
15- 3/4"* (400mm)
5-1/2"
(140mm)
5-3/8"* (135mm)
1
1-1/4" (285mm)
15"* (380mm)
12- 3/4"
(
323mm)
3
-1/2" (90mm)
2
-3/8" (59mm)
3
-7/8" (99mm)
7
-1/2" (190mm)
Finished Wall (Must be flat surface)
Finished Floor
Wall Hung Flushometer Toilet,
1.28GPF when used with High Efficiency Flushometer Valve
■ PERFORMANCE
The TOTO®low consumption flushometer
toilet received high ratings during
NSI/ASME testing at independent
A
laboratories. Designed with a powerful
siphon jet flush, the bowl offers a large
water surface and a 100% glazed trapway.
■ SPECIFICATIONS
Water Use: 1.28 Gpf/4.8Lpf
Flush System: Siphon jet
Min. Water Pressure:
35 psi static
Water surface: 12-5/8" x 10-1/4"
Trap dia: 2-1/8"
Trap seal: 2-5/8"
Warranty:
Material: Vitreous china
Shipping Weight:
One Year Limited Warranty
CT708E–Bowl
49 lbs.
CT708EV–Bowl
53.5 lbs.
* Suggested Dimension
CT708E Top Spud
Shipping Dimensions:
CT708E–Bowl
15-1/2"L x 15-1/2"W
x 26-3/8"H
CT708EV–Bowl
17-1/8"L x 16"W x 26"H
Recommended carrier: Any Jay R. Smith
siphon jet support (Four-bolt).
Fixture dimensions and hydraulic performance
meet or exceed ANSI/ASME standard
A112.19.2 and CAN/CSA B 45 requirements.
Meets and exceeds ASME A112.19.2 standards
for drainline carry distance with a 2% grade
and 4” I.D. pipe.
Listing / Approvals: IAPMO/c-UPC, CSA,
City of Los Angeles, State of Massachusetts,
and others.
Meets the American Disabilities Act
Guidelines and ANSI A117.1
requirements where installed so top of
rim is 17” from the finished floor.
These dimensions and specifications
are subject to change without notice.
TOTO®U.S.A., INC. • 1155 Southern Road, Morrow, GA 30260
Tel. (888) 295-8134 • Fax. (770) 282-8701 • www.totousa.com
Printed in U.S.A. © TOTO®LTD. 09/07 #E50170
* Suggested Dimension
CT708EV Back Spud
Standard Installation
Note: If carrier bolt doesn’t extend/is flush with china, use retrofit caps (TMU111).
Retrofit Installation
Warning: Installation on uneven surface can cause fracture.
INSTALLATION SURFACE MUST BE COMPLETELY FLAT.
Printed on recycled paper
REV 10/07
Loading...