Factory Direct Hardware CT705EN User Manual
Flushometer Toilet, 1.28GPF when used with
FEATURES
• Floor-mounted
• Elongated front bowl
• SanaGloss® ceramic glaze
• 10"-12" rough-in
MODELS
• CT705ENG
Commercial fl oor-mounted toilet with SanaGloss
ceramic glaze
• CT705EN
Commercial fl oor-mounted toilet
CT705EN(G)
High Effi ciency Flushometer Valve
• SS534 seat (sold separately)
• SS134 seat (sold separately)
COLORS/FINISHES
• Standard
#01 Cotton
#03 Bone (not available in SanaGloss)
#12 Sedona Beige (not available in SanaGloss)
• Optional
See price book for additional information
PRODUCT SPECIFICATION
The fl oor-mounted, low consumption siphon jet
fl ushing system toilet shall be 1.28GPF/4.8LPF when
paired with a 1.28GPF fl ushometer valve. Toilet can
be mounted on 10" or 12" rough-in. Toilet shall be
elongated front bowl and SanaGloss ceramic glaze
(CT705ENG).
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1,
ASME A112.19.14
• Certifi cations: IAPMO (cUPC), State of Massachusetts
, City of Los Angeles, and others
• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
• Legislative compliance: California AB715, California
Green Building Code, City of Los Angeles Water
Effi ciency Ordinance
CT705EN(G)
Flushometer Toilet, 1.28GPF when used with
High Effi ciency 1.28GPF Flushometer Valve)
SPECIFICATIONS
• Water Use 1.28GPF/4.8LPF
• Flush System Siphon jet fl ushing action
• Min. Water Pressure 35 psi (fl owing)
• Min. Flow Rate 23 GPM
• Water Surface 10-1/4" x 9-5/8"
• Trap Diameter 1-7/8"
• Rough-in 12", or 10"
• Trap Seal 2-3/8"
• Warranty One Year Limited Warranty
• Material Vitreous china
• Shipping Weight CT705EN(G) - 52.5lbs
• Shipping Dimensions CT705EN(G)
26-1/2"L x 9-1/2" W1 x 16-
1/4"W2 x 17"H
INSTALLATION NOTES
60
55
50
45
40
35
30
25
Flowing Pressure (psi)
20
15
10
5
10 15 20 25 30
Water pressures over 80 psi are not recommended for
most plumbing fi xtures.
OPERATING RANGE
WITHOUT SCREW
ADJUSTMENT
MINIMUM OPERATING
RANGE WITH SCREW
ADJUSTMENT
Flow Rate (Gpm)
ORIGINAL
POSITION
1/4 CCW
1/2 CCW
3/4 CCW
Screw Adjustment (turn)
with 10" rough-in
5-1/2"
140mm)
3" (76mm)
1-1/2" I.P.S
10"
(254mm)
18-1/2" (470mm)
25-1/4" (642mm)
26-1/8" (663mm)
14-3/8"
(365mm)
(380mm)
15"
5-1/2"
140mm)
3" (76mm)
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
with 12" rough-in
14-3/8"
(365mm)
18-1/2" (470mm)
25-1/4" (642mm)
28-1/8" (714mm)
1-1/2" I.P.S
12"
(254mm)
15"
(380mm)
14-3/8"
(365mm)
(232mm)
9-1/8"
*4-3/4"
(121mm)
1" I.P.S
*26-1/2"
(673mm)
These dimensions and specifi cations are subject to change without notice
Printed in U.S.A. | © TOTO USA 06/09 | Printed on recycled paper ƛ
#
Loading...