Factory Direct Hardware CST474CEF User Manual [en, es, fr]

Installation Manual

Manual de Instrucciones

Manuel D’Installation

CST243EF CST244EF CST423EF CST424EF(G) CST454CEF(G) CST454CUF(G) CST743E CST744E(G)

CST743ED CST744ED CST744EL CST744ELD CST744EF.10 CST744EFD.10 CST754EF(N) CST784EF

Warranty Registration and Inquiry For product warranty registration, TOTO U.S.A. Inc. recommends online warranty registration. Please visit our web site http://www.totousa.com. If you have questions regarding warranty policy or coverage, please contact TOTO U.S.A. Inc., Customer Service Department, 1155 Southern Road, Morrow, GA 30260 (888) 295-8134 or (678) 466-1300 when calling from outside of U.S.A.

TABLE OF CONTENTS

Thanks for Choosing TOTO!

.............................................................................

Common Tools Needed ...................................................................................... 2

Included Parts ...................................................................................................... 2

Before Installation ................................................................................................ 3

ENGLISH

Installation Procedure .......................................................................................3-5

Toilet Tank Fill Valve Instructions ..................................................................... 5-6

Flush Valve Servicing Instructions .......................................................................7

Care and Cleaning

...............................................................................................7

Warranty................................................................................................................ 8

Rough-In Dimensions ....................................................................................... 24

Replacement Parts ............................................................................................. 25

THANKS FOR CHOOSING TOTO!

The mission of TOTO is to provide the world with healthy, hygienic and more comfortable lifestyles. We design every product with the balance of form and function as a guiding principle. Congratulations on your choice.

COMMON TOOLS NEEDED

• 10” adjustable wrench

• Carpenter’s Level

• Hacksaw

• Tape Measure

ADDITIONAL ITEMS (NOT SUPPLIED BY TOTO):

• Bowl Wax Ring

• Closet Flange Mounting Bolts

(usually 2 T-bolts, 2 metal washers and 2 nuts)

• Water Supply Line (typically 1/2” compression to 7/8” ballcock)

• Toilet Seat (TOTO SoftClose recommended)

• Hand Pliers

• Flat Screwdriver

• Putty Knife

INCLUDED PARTS

Check to make sure you have all these parts from the package:

China Bowl

Tank to Bowl Hardware

a b

a. Bolts (metal) - 2 c. Washers (metal) - 4 b. Washers (rubber) - 2 d. Nuts (metal) - 4

Tank

Tank Lid Tank to Bowl Gasket

Flange Caps (for Bowl)

e f

e. Caps (plastic) - 2 b. Base (plastic) - 2

BEFORE INSTALLATION

 Read these instructions thoroughly before beginning work.  Please leave instructions for customers. These instruction contain maintenance

and warranty information.

 If necessary, remove the existing toilet.

IMPORTANT! Due to the powerful performance of our Cyclone, G-Max, E-Max and Power Gravity ﬂushing systems, they are not speciﬁed for back-to-back installations. The only means of installing these toilets in a back-to-back situation is when the toilet drain connections incorporate a WYE ﬁtting. Please contact your builder or contractor prior to this installation.

ENGLISH

Double Combination WYE / 1/8 Bend

YES

Double Sanitary Tee / Sanitary Cross

In order for your new TOTO® toilet to ﬁt correctly, the distance between the ﬁnished wall to the center of the closet ﬂange must be at 10 to 12 inches. This measurement is called the Rough-In.

Supply Valve

Rough-In

Finished Wall

Closet Flange

C/L

INSTALLATION PROCEDURE

1) Clean any debris out of the closet ﬂange and then install new mounting bolts (not supplied) into the slots of the closet ﬂange (see Illustration 1). The head of the bolt should be inserted into the slot with its threads facing upward.

2) Carefully turn the toilet upside down onto some padding. Firmly press a new bowl wax ring (not supplied) onto the circular recess around the toilet bowl’s horn (see Illustration 2). Turn the toilet upright and gently lower into position over the closet ﬂange. With toilet properly aligned, press ﬁrmly on both sides of toilet rim to set the bowl wax ring (see Illustration 3).

CA UTION: Do not move the bowl after

the bowl wax ring is set. Thread the nuts and tighten evenly until bowl is snug to closet ﬂange. Install the bolt caps (see Illustration 3).

CA UTION: Do not over-tighten the nuts

as damage to the china bowl may result.

Ill. 3

Bolt Cap

Washer *

Base Cap

Bowl Base

* Not Supplied

Ill. 1

Ill. 2

Wax Ring

Horn

Three Points of Contact

Nut *

Installation Procedures (continued)

NO TE: Three Points of Contact: The toilet bowl has three points of

contact, which will actually contact the bottom of the toilet tank when properly

ENGLISH

installed. The location of these points can be seen on the bowl at the tank receiving area. The three points are front left (1), front right (2), and back center (3). Recall these three points during the Toilet Tank installation

3) Place the tank upside down onto some padding. Inspect the smaller ﬁll valve nut and larger ﬂush valve nut for a secure connection (see Illustration 4). Try to tighten the nuts with your hands. If loose, tighten the nut hand tight and an additional 1/4 turn for the smaller ﬁll valve nut and an additional 1/2 turn for the larger ﬂush valve nut.

Place the tank-to-bowl gasket onto the

ﬂush valve nut. While pressing down, spread the gasket over the nut until the gasket touches the bottom of the tank. A slight gap between the tank bottom and the gasket is allowable.

4) Lay the tank down on its back. Place a rubber washer onto a brass bolt (see Illustration 5). Reach inside the tank and position the bolt through one of the holes in the bottom of the tank. On the outside of the tank, place a metal washer and nut onto the bolt. Hold the bolt centered in the hole and tighten the nut ﬁnger tight. Turn the nut an additional 1/2 turn with a wrench. Repeat this process for the remaining hole in the tank.

Pick up the tank and carefully guide the

brass bolts to align the tank with the bowl. Attach a metal washer and nut to each bolt. Tighten the nuts ﬁnger tight and inspect that the tank is level (see Illustration 6). Once level, tighten the bolts equally until the tank makes THREE POINTS OF CONTACT with the bowl.

Ill. 6

Points of Contact

Ill. 4

Fill Valve Nut

Ill. 5

Cut Away View

YES

Flush Valve Nut

Tank to Bowl

Gasket

Rubber Washer

Bolt

1 & 2

Metal Washer

Nut

3 Gap

1 & 2

Gap

Installation Procedures (continued)

5) Flush the water supply line for a few seconds to remove any debris that may enter the new ﬁll valve. (For new home constructions and/or additions, ﬂush the water supply line for more than a minute to help remove any residual PVC adhesives, solder ﬂux, and/ or pipe sealants that were used for the new plumbing.) Connect the water supply line to the ﬁll valve threads as seen at the bottom of toilet tank (see Illustration 7). Tighten this connection ﬁnger tight.

CA UTION: Avoid using a wrench to tighten

the connection as you may damage the plastic threads and/or cause the ﬁll valve to rotate inside the tank.

NO TE: The water supply pressure should be

20 to 80 psi static.

6) No ballcock / ﬁll valve adjustments are needed. The water will automatically stop at proper level.

Flush the toilet several times. Check ﬂapper

valve for proper operation. Make sure that chain is not tangled and that the ﬂapper arm is in its proper position.

7) Install the toilet tank lid onto the toilet tank top.

8) Install the toilet seat onto the toilet bowl using the mounting hardware in the toilet seat box. Place seat onto bowl and rotate the hinge down. Position seat stoppers under the seat hinge. Insert bolt into seat hinge and through the toilet bowl. Install plastic nut onto bolt from underneath. Tighten the bolt securely. Install the seat bolt caps.

NO TE: Tighten the seat bolt until the hinge

is secure. The seat and lid will have slight side to side movement, which is normal. This freedom of movement allows the seat to SoftClose® without binding.

Ill. 8

Seat Hinge

Ill. 7

7/8” Ballcock Thread

HAND TIGHTEN ONLY

Cap

Plastic

Bolt Seat Stopper

Plastic Nut

MOUNTING HARDWARE

1 - Cap 2 - Plastic Bolt 3 - Seat Hinge 4 - Seat Stopper 5 - Toilet Bowl 6 - Plastic Nut

ENGLISH

Bowl

TOILET TANK FILL VALVE INSTRUCTIONS

Installation Procedure

1) Shut off the water supply to the toilet.

2) Flush toilet and remove remaining water from tank with a sponge.

3) Remove the water supply connection at the ﬁll valve.

4) Remove old ﬁll valve and use damp sponge to clean hole in tank.

Installation Procedures (continued)

5) Place new ﬁll valve inside tank hole.

6) Thread mounting nut onto ﬁll valve shank and tighten the nut. NO TE: Do not over-tighten. Be sure to install ﬁll valve in a position that does not

interfere with the trip lever operation.

ENGLISH

7) Connect water supply to ﬁll valve shank and hand-tighten only. NO TE: Do not overtighten. These are plastic parts. Never use pipe dope on any

water supply connection.

8) Attach reﬁll tube to ﬁll valve nipple and clip other end of reﬁll tube to the overﬂow pipe.

9) Turn water supply ON and check for leaks outside the tank.

NO TE: As water ﬁlls the tank, water is also directed into the overﬂow tube via the

reﬁll tube. This additional ﬂow of water is critical to reﬁlling your toilet’s bowl. Once the water stops ﬁlling the tank, some residual drops of water may drip from the ﬁll valve. This is NORMAL as these drops will subside.

Water Level Adjustment

Depending on the manufacturing plant, you may have one of two of the following ﬁll valves:

Type A Type B

Water Level

Type C

For Type A and Type C Fill Valve: Refer to the water level (WL) setting marked

on the inner wall of the tank. Allow the water to ﬁll the tank. Turn the adjustment screw clockwise in the (+) direction to increase the water level height (see Illustration 1). Turn the adjustment screw counter-clockwise in the (-) direction to decrease the water level height. Flush the toilet to verify the correct water level. Adjust as necessary.

For Type B Fill Valve:

There are no water level adjustments. The ﬁll valve has been preset at the factory.

Ill. 1

Water

Level

Top of

Overﬂow

Tube

FLUSH VALVE SERVICING INSTRUCTIO

(ST453U Model Tank Only)

1. Turn off water supply and ﬂush the toilet.

2. Remove the tank lid and place it upside down on a clean surface.

3. Pull the clip on top of trip lever gear box as shown.

4. Pull gear box away and set on the side as shown.

5. Rotate and pull up on the ﬂush tower to remove it.

6. Remove the grey rubber seal gasket and rinse under running water to clean.

7. Place the gasket back on the ﬂush tower.

8. Align and place the ﬂush towet into housing and gently press to snap and to lock into place.

9. Replace the trip lever gear box and push down on clip to lock it in place.

10. Carefully install the tank lid back on the tank.

11. Flush the toilet several times making sure the trip lever operates normally.

12. Check the water level in the tank and leak.

HSILGNE

CARE AND CLEANING

WARNING!

DO NOT USE IN-TANK BOWLCLEANERS. The use of high concentration of chlorine or chlorine-related products can seriously damage ﬁttings in the tank. This damage can cause leakage and property damage. TOTO shall not be responsible or liable for any tank ﬁtting failure or damage caused by the use of in-tank bowl cleaners.

WARRANTY

1. TOTO warrants its vitreous china products (“Product”) to be free from defects in materials and workmanship during normal use when properly installed and serviced, for a period of one (1) year from date of purchase. This limited warranty is extended only to the ORIGINAL PURCHASER of the Product and is not transferable to any third party, including but not limited to any subsequent purchaser or owner of the Product. This warranty applies only to TOTO Product purchased and installed in North, Central and South America.

2. TOTO’s obligations under this warranty are limited to repair, replacement or other appropriate adjustment, at TOTO’s option, of the Product or parts found to be defective in normal use, provided that such Product was properly installed, used and serviced in accordance with instructions. TOTO reserves the right to make such inspections as may be necessary in order to determine the cause of the defect. TOTO will not charge for labor or parts in connection with warranty repairs or replacements. TOTO is not responsible for the cost of removal, return and/ or reinstallation of the Product.

3. This warranty does not apply to the following items:

a. Damage or loss sustained in a natural calamity such as ﬁre, earthquake, ﬂood, thunder,

b. Damage or loss resulting from any accident, unreasonable use, misuse, abuse, negli-

c. Damage or loss resulting from sediments or foreign matter contained in a water system. d. Damage or loss resulting from improper installation or from installation of the Product in

e. Damage or loss resulting from electrical surges or lightning strikes or other acts which are

f. Damage or loss resulting from normal and customary wear and tear, such as gloss reduc-

g. Tank ﬂushing mechanisms of plastic or rubber moving parts. h. Toilet seats of plastic, wood or metal.

4. In order for this limited warranty to be valid, proof of purchase is required. TOTO encourages

5. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS

6. To obtain warranty repair service under this warranty, you must take the Product or deliver it

WARNING! TOTO shall not be responsible or liable for any failure of, or damage to, this Product caused by either chloramines in the treatment of public water supply or cleaners containing chlorine (calcium hypochlorite). NOTE: The use of a high concentrate chlorine or chlorine related products can seriously damage the ﬁttings. This damage can cause leakage and serious property damage.

THIS WRITTEN WARRANTY IS THE ONLY WARRANTY MADE BY TOTO. REPAIR, REPLACEMENT OR OTHER APPROPRIATE ADJUSTMENT AS PROVIDED UNDER THIS WARRANTY SHALL BE THE EXCLUSIVE REMEDY AVAILABLE TO THE ORIGINAL PURCHASER. TOTO SHALL NOT BE RESPONSIBLE FOR LOSS OF THE PRODUCT OR FOR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR EXPENSES INCURRED BY THE ORIGINAL PURCHASER, OR FOR LABOR OR OTHER COSTS DUE TO INSTALLATION OR REMOVAL, OR COSTS OF REPAIRS BY OTHERS, OR FOR ANY OTHER EXPENSE NOT SPECIFICALLY STATED ABOVE. IN NO EVENT WILL TOTO’S RESPONSIBILITY EXCEED THE PURCHASE PRICE OF THE PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES, INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR USE OR FOR A PARTICULAR PURPOSE, ARE EXPRESSLY DISCLAIMED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION AND EXCLUSION MAY NOT APPLY TO YOU.

electrical storm, etc.

gence, or improper care, cleaning, or maintenance of the Product.

a harsh and/or hazardous environment, or improper removal, repair or modiﬁcation of the Product. (NOTE: Product model codes allow a maximum of 80 PSI. Check local codes or standards for requirements).

not the fault of TOTO or which the Product is not speciﬁed to tolerate.

tion, scratching or fading over time due to use,cleaning practices or water or atmospheric conditions.

warranty registration upon purchase to create a record of Product ownership at http://www. totousa.com. Product registration is completely voluntary and failure to register will not diminish your limited warranty rights.

WHICH VARY FROM STATE TO STATE, PROVINCE TO PROVINCE OR COUNTRY TO COUNTRY.

prepaid to a TOTO service facility together with proof of purchase (original sales receipt) and a letter stating the problem, or contact a TOTO distributor or products service contractor, or write directly to TOTO U.S.A., INC., 1155 Southern Road, Morrow, GA 30260 (678) 466-1300 or (888) 295-8134, if outside the U.S.A. If, because of the size of the Product or nature of the defect, the Product cannot be returned to TOTO, receipt by TOTO of written notice of the defect together with proof of purchase (original sales receipt) shall constitute delivery. In such case, TOTO may choose to repair the Product at the purchaser’s location or pay to transport the Product to a service facility.

HSILGNE

+ 18 hidden pages