Factory Direct Hardware B4310LF-SD User Manual

000
Engineer/Architect Approval
Model Specified:
Approval: Date:
SPOUT
OUTLET
HANDLE
222
111
333
777
999
444
666
888
✔✔✔
Wallmount Sink Faucets
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselectonline.com for finish options and product availability.
Page 4.C.8
(1) See Page 9.C.1 for Optional Rigid/Swivel Spouts. These spouts can ONLY BE added to SPOUT Option No. 9. Flowrates are at 60 PSI. (2) See Page 9.C.2 for Optional Swing Spouts. These spouts can ONLY BE added to SPOUT Option No. 2.
Refer to www.specselectonline.com for individual models. Note: Use this page front and back as a product submittal sheet.
203mm (8'') Wallform Swing Spout (2) (S2)
203mm (8'') Tubular Swing Spout (2) (S5)
279mm (11'') Tubular Swing Spout (2) (S7)
Heavy Duty (R4), 152mm (6") Bend Rigid/Swivel Gooseneck Spout (1)
Vandal Resistant
1.9 USGPM (7.2 L/min) Flow Control Rosespray
Vandal Resistant
1.5 USGPM (5.7 L/min.) Laminar w/Antimicrobial By AgION
TM
Vandal Resistant
1.5 USGPM (5.7 L/min.) Flow Control Aerator
Standard
1.5 USGPM (5.7 L/min.) Flow Control Aerator
Specification: (example)
CAST BRASS two handle wallmount sink faucet
• 203mm (8'') centers, polished chrome plated finish
BRASS swing spout or 3/8” IPS BRASS PIPE Rigid/Swivel Gooseneck Spout
• ADA compliant color indexed metal lever or blade handles with vandal resistant screws
and … with … (add CER-TECK™ 1/4 turn ceramic structures
or TUF-TECK™ compression structures)
with … integral check stops (if required) with … (add spout required) with … (add outlet required) with … (add handle required) with … adjustable centers
(add Suffix AC if required – See Back Page)
28C4443 28T4443
28C6944 28T6944
102mm (4") Hooded Blade Handles
76mm (3") Lever Blade Handles
102mm (4") Blade Handles,
Sanitary
Hoods
DESCRIPTION PRODUCT NO.
Less integral stops
CER-TECK 28C4
With integral check stops
CER-TECK 28C6
Less integral stops
TUF-TECK 28T4
With integral check stops
TUF-TECK 28T6
Wallmount Sink Faucets
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselectonline.com for finish options and product availability.
DSP–28C/T4 & 6
Refer to www.specselectonline.com for individual models. Note: Use this page front and back as a product submittal sheet.
Approvals:
CSA certified
Complies to ASME A112.18.1
Lever Blade Handle No.’s 2, 3 and 4, ADA Compliant and meet Handicapped Accessibility Standard ASME A117.1 of less than 5 lbs. operating force.
IAPMO listed
(Contact Delta Representative for State and/or
Local Approvals.)
FLOWRATE vs PRESSURE
FRONT VIEW
GOOSENECK SPOUTS SWING SPOUTS
INLETS - 1/2'' FIP/MIP
Note: Measurements may vary ± 6mm (0.25'')
OUTLET “D”
NO.
mm in.
1 17 0.67 2 18 0.69 3 18 0.69 4 17 0.67
ADJUSTABLE CENTERS
Add Suffix “AC to Product Number
See Page 9.C.1 for additional optional spouts.
GOOSENECK SPOUT ASSEMBLIES
Spout “A”“C”“L
No. SPOUT TYPE mm in. mm in. mm in.
9 Gooseneck–Standard (R4) 152 6 124 4.9 146 5.8
Spout “A”“C”“L
No. SPOUT TYPE mm in. mm in. mm in.
1 8" Wallform Spout (S2) 206 8.1 15 0.6 130 5.1
2 8" Tubular Spout (S5) 185 7.3 41 1.6 147 5.8
4 11" Tubular Spout (S7) 277 10.9 28 1.1 104 4.1
See Page 9.C.2 for additional optional spouts.
SWING SPOUT ASSEMBLIES
(2.50")
64mm
1/2-14 NPT
MALE
1/2-14 NPT
FEMALE
A
L
D
41mm
(1.6")
C
96mm
(3.77")
102mm
(4.0")
114mm
(4.5")
89mm
(3.5")
132mm
(5.2")
102mm
(4.0")
4
3
2
(2.50")
64mm
1/2-14 NPT
MALE
1/2-14 NPT
FEMALE
A
L
C
D
51mm
(2.0")
FLOW (l/min.)
9
8
7
6
5
4
3
2
1
0
10 20 30 40 50 60 70 80
Line Pressure (psig)
Spout Outlets
No. 3 & 4 Aerator No. 2 Laminar Flow Outlet
No. 1 Rose Spray
FLOW
(USGPM)
2.5
2
1.5
1
.5
00
91mm
(3.6")
76mm
(3.0")
51mm
203 ± 6mm
(8.0" ± 0.25")
INLETS: 1/2-14 NPT (FEMALE)
OR 1/2-14 NPT (MALE) - WITH SUPPLIED NIPPLE
(2.0")
51mm
140-267mm
(5.5" - 10.5")
(2.0")
1/2-14 NPT
FEMALE
Loading...