Factory Direct Hardware 611T040 User Manual

Electronic Proximity™Sensing
Technology Lavatory Faucets
TECK
®
COMMERCIAL
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
DSP–610T Rev. B
Refer to www.specselect.com for individual models. Product supplied as shown by solid lines. All items shown by dotted lines supplied by others.
Note: Measurements may vary ± 6mm (0.25'')
Approvals:
CSA certified
Complies to ASME A112.18.1
ADA Compliant and meets Handicapped Accessibility Standard ASME A117.1 of less than 5 lbs. handle operating force.
IAPMO listed
(Contact Delta Representative for State and/or Local
Approvals.)
SPECIFICATION (example)
• Deck mount electronic lavatory faucet
Cast chrome plated brass spout
• Proximity
Sensing Technology
• Hardwire 24 VAC to 6 VDC (Transformer required. Specify separately)
• Battery 4 ‘C’ cell
• Surface mount control box
• Mixing valve required (Order separately)
1.5 USGPM (5.7 L/min)
610T040 Grail
®
, hardwire
611T040 Grail
®
, battery operated
610T040-BB Grail
®
, hardwire with battery backup
(See DSP-BB)
611T040-HP Grail
®
, HydroPower™ (See DSP-HP)
0.5 USGPM (1.9 L/min)
610T050 Grail
®
, hardwire
611T050 Grail
®
, battery operated
610T050-BB Grail
®
, hardwire with battery backup
(See DSP-BB)
OPERATION:
• Hands free (touchless) operation.
• No visible sensor, the spout is the sensor.
• Water flows when sensor is activated.
• Water flow stops upon de-activiation of sensor.
Auto shut-off feature. F
actory set to 45 seconds. Will reset and recalibrate once obstruc­tion is removed.
• Adjustable sensing distance 0 to 89mm (0 to 3.5") factory set to 89mm (3.5")
± 1/8".
• Low battery audible beep (for battery models only) will activate after faucet shuts off when approximate­ly 1500 cycles remain.
NOTE: For optimum performance of this product, we recom­mend a system pressure between 20 and 80 PSI static. This product will operate up to a maximum of 125 PSI static per ANSI and CSA requirements. However, we do not recommend pressures above 80 PSI. Thermal expansion or leaking pressure reducing valves may require use of expansion tanks or relief valves to ensure your system never exceeds its maximum intended pressure setting.
FLOWRATE vs PRESSURE
2.5
2
1.5
1
.5
00
0
1
2
3
4
5
6
7
8
9
10 20 30 40 50 60 70 80
Line Pressure (psig)
FLOW
(l/min.)
FLOW
(USGPM)
6_ _ T040
6_ _ T050
Outlet Flowrates
ELECTRONIC DECK MOUNT LAVATORY FAUCET
GRAIL
®
SIDE VIEW
FRONT VIEW
Sensing Wire
711 mm (28")
32 mm (1.25")
Dia. Hole Required
38mm (1.5")
Max Deck Thickness
3/8" Compression
To Control Box
44.5 mm (1.75")
124 mm
(4.9")
77 mm
(3.0")
102 mm
(4")
062022A GRAIL®DECORATIVE COVERPLATE 102 mm (4.0")
Reduces Max. Deck Thickness to 28 mm (1 1/8")
152 mm
(6.0")
62 mm
(2.5")
VANDAL PROOF SURFACE MOUNT HOUSING
3/8"
Compression
Connection
Outlet
Inlet 3/8" NPT or
3/8" Compression Adaptor
(Supplied)
36 mm (1.43")
Battery Pack
1/8" Allen Screw
Recommended
381 mm
(15" max.) to
top of counter
146 mm
(5.73")
89 mm
(3.5") MAX.
101 mm
(3.96")
139 mm
(5.47")
Battery Operated box shown. Hardwire Version comes complete with
Watertight Connector and Hardwire Converter 24VAC to 6VDC.
Hardwire with Battery Backup (-BB)
comes complete with Watertight Connector, Hardwire Converter 24VAC to 6VDC and 9V battery. (See DSP-BB).
Loading...