Factory Direct Hardware 591T1266 User Manual

Electronic Faucet - 591T Series
4" Cast Lavatory
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
DSP–591T Rev. D
* Mixing Valve supplied by others. Flowrates are at 60 PSI.
(1) With Thermostatic Limit Stop. (2) Hydro Power♥available. Add suffix -HP. Refer to www.specselect.com for individual models. Note: Use this page front and back, with specification drawing page referenced above, as product submittal sheets.
Engineer/Architect Approval
Model Specified:
Approval: Date:
Specification: (example)
• 102mm (4") electronic faucet
CAST one-piece Synergy
®
body with
integral waterproof sensor and connector
• Polished chrome plated trim
Battery (4 ‘C’ cell) or Hardwire (24VAC)
infrared electronic handwash
•H2O
PTICS
technology – no external
adjustments required
• Adjustable sensing range and timeout
• Audible low battery indicator
• Serviceable filter screen upstream of the valve
591T1250
000
222
111
333
555
777
999
444
666
888
Base Model with Surface Mount Housing* SEE Specification Drawing #1 (2)
For RECESSED MOUNTING Components ASSEMBLED in 10" Box w/S/S Cover. * SEE Specification Drawing #2
4" CAST Lavatory Spout
Vandal Resistant
0.5 USGPM (1.9 L/min) Flow Control Non­Aerating Spray Outlet
Vandal Resistant
1.0 USGPM (3.8 L/min) Flow Control Non­Aerating Spray Outlet
For RECESSED MOUNTING Components & Thermostatic Mixing Valve ASSEMBLED in 10" Box w/S/S Cover. SEE Specification Drawing #4
For RECESSED MOUNTING Components & Mechanical Mixing Valve (1) ASSEMBLED in 10" Box w/S/S Cover. SEE Specification Drawing #3
✔✔✔
• Metal hold-down package
• Tempered water supplied to solenoid valve, (except control box options No. 0 and 1)
and... with... (specify battery or hardwire) with... (add outlet required) with... (add control box required) with... (add suffix -HP if required
- See Back Page)
with... (transformer - specify separately
- See Back Page)
SPOUT & SENSOR
OUTLET
CONTROL BOX
Hardwire 591T02 For Chrome
591T02 – SS For Brilliance
®
Stainless Steel
Battery Operated 591T12 For Chrome
591T12 – SS For Brilliance
®
Stainless Steel
Hardwire with Battery Backup 591T02 – BB For Chrome
591T02 – SS BB For Brilliance
®
Stainless Steel
DESCRIPTION PRODUCT NO.
Vandal Resistant
1.5 USGPM (5.7 L/min.) Laminar w/Agion
®
Antimicrobial
Vandal Resistant
1.5 USGPM (5.7 L/min.) Flow Control Aerator
Standard
1.5 USGPM (5.7 L/min.) Flow Control Aerator
TECK
®
COMMERCIAL
Electronic Faucet - 591T Series
4" Cast Lavatory
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
DSP–591T Rev. D
591T ELECTRONIC FAUCET OPTIONAL ACCESSORIES:
TRANSFORMERS:
060704A 110 to 24VAC Class II 20VA (Up to 5 Electronic Valves) 060771A 110 to 24VAC Class II 40VA (Up to 10 Electronic Valves) 060772A 110 to 24VAC Class II 100VA (Up to 25 Electronic Valves)
CORDS:
060690A 36" Cable Extension
Approvals:
CSA certified
Complies to ASME A112.18.1
ADA Compliant and meets Handicapped Accessibility Standard ASME A117.1 of less than 5 lbs. handle operating force.
IAPMO listed
Control Box Option 6 Mechanical Mixing Valve CSA certified
Control Box Option 8 Thermostatic Mixing Valve CSA certified and meets ASSE 1016, 1017, 1070
(Contact Delta Representative for State and/or
Local Approvals.)
U.S. Patent # 6, 826, 455
OPERATION:
• Hands free (touchless) operation.
• Water flows when sensor is activated.
• Water flow stops upon de-activation of sensor.
Auto shut-off feature that is selectable between 15 to 75 seconds.
Factory set to 45 seconds. Will reset once obstruction is removed.
• Adjustable sensing distance 76 to 381mm (3" to 15") factory set to 229mm (9") (+/– 1.0”)
• Low battery audible beep (for battery models only). Will activate after faucet shuts off when approximately 1500 cycles remain.
FLOWRATE vs PRESSURE
2.5
2
1.5
1
.5
00
0
1
2
3
4
5
6
7
8
9
10 20 30 40 50 60 70 80
Line Pressure (psig)
FLOW (l/min.)
FLOW
(USGPM)
Spout Outlets
No. 3 & 4 Aerator
No. 2 Laminar Flow Outlet
No. 6 Flow Control Outlet
No. 5 Low Flow Outlet
Outlet Flowrates
Note: Measurements may vary ± 6mm (0.25'')
591T1250
Typical
Installation
92mm
(3.625")
58mm
(2.3")
127mm
(5.0")
107mm
(4.2")
165mm
(6.5")
135mm
(5.3")
D
Refer to www.specselect.com for individual models. Product supplied as shown by solid lines. All items shown by dotted lines supplied by others.
CAST SPOUT “D” OUTLET NO. mm in.
2 11 0.45 3 11 0.45 4 11 0.45 5 11 0.45 6 11 0.45
FRONT VIEW SIDE VIEW
NOTE: For optimum performance of this product, we recommend a system pressure between 20 and 80 PSI static. This product will operate up toa maximum of 125 PSI static per ANSI and CSA requirements. However, we do not recommend pressures above 80 PSI. Thermal expansion or leaking pressure reducing valves may require use of expansion tanks or relief valves to ensure your system never exceeds its maximum intended pressure setting.
3/8" Compression Connection
Sensor
168mm
(6.25")
3 Holes
22.2mm
(0.875") Dia.
51mm (2") MAX.
Deck Thickness
102mm
(4.0")
178mm
(7.0") MAX.
331mm
(13.0")
MAX.
3/8"
Compression
Connection
Sensor
Cord
508mm (20.0")
Stainless Steel Hose
3/8"
Compression
Connection
Sensing Zone 228mm (9.0")
Default
Sensor
TECK
®
COMMERCIAL
HYDRO POWER
Add suffix “-HP” to Product
Number for Hydro Power
.
See DSP-HP for detailed specification. Available on
Battery Powered #0 Control Box and #2, 3 or 4 outlets only.
HARDWIRE WITH BATTERY BACKUP
Add suffix “-BB” to Product
Number. See DSP-BB for detailed specification.
Loading...
+ 4 hidden pages