
Model No: 591T0236
CAST BRASS one piece body with Integral waterproof sensor and
H²Optics® technology- no external adjustments required
Serviceable filter upstream of the solenoid valve
Adjustable sensing range and timeout
Hard Wire(24VAC) infrared electronic handwash(Product supplied with a
Converter to convert 24VAC to 6 VDC)
Spout#: 2 - 4" (102mm) Cast Brass Electronic Faucet
Outlet#: 3 - Vandal Resistant Aerator Outlet- 1.5 USGPM (5.7 L/min) Flow
Rate at 60 psi- pressure compensating
Vandal Resistant 10" x 10" Metal Box for RECESSED or SURFACE
mounting- includes MECHANICAL MIXING VALVE with Thermostatic Limit
Stop-FACTORY PLUMBED FOR EASY FIELD INSTALLATION-requires
HOT and COLD WATER supplies - with Metal Cover
For optimum performance of this product, we recommend a system
pressure between 20 and 80 PSI static. This product will operate up to a
maximum of 125 PSI static per ANSI and CSA requirements. However, we
do not recommend pressures above 80 PSI. Thermal expansion or leaking
pressure reducing valves may require use of expansion tanks or relief
valves to ensure your system never exceeds its maximum intended
Complies to ASME A112.18.1
ADA compliant and meets Handicapped Accessibility Standard ASME
A117.1 of less than 5 lbs. handle operating force
(Contact Delta Representative for State and/or Local Approvals)
Control Box option 6 Mechanical mixing valve CSA certified
(Dimensional drawing on following page)
Hands free (touchless) operation
Water flows when sensor is activated
Water flow stops upon deactivation of sensor
Auto shut-off feature that is selectable between 15 to 75 seconds- factory
set to 45 seconds- will reset once obstruction is removed
Adjustable sensing distance from 76 to 381 mm (3" to 15")- factory set to
229 mm (9" plus or minus 1")
For Additional Hi Rise Electronic Faucet models, seeElectronic - Delta HDF
Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - (317) 848-1812
Electronic Faucets
Hard Wire - 4" Lavatory - CAST one-piece body with
integral waterproof sensor and connector - (Product
supplied with a Converter to convert 24VAC to 6 VDC)
Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.
Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. This spec was produced November 03, 2011.
Page of1 2
Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - (905) 712-3030

Model No: 591T0236
Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - (317) 848-1812
Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.
Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. This spec was produced November 03, 2011.
Page of2 2
Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - (905) 712-3030