Factory Direct Hardware 27418001 User Manual

Installation Instructions / Warranty

Raindance Royale Air

28420XX1

Ceiling Arm

27418XX1

Shower Arm

27410001

9.05801.03 4/2006

28420XX1

27410XX1

Suggested Layouts

gpm

27418XX1

Installation Considerations:

The 27418XX1 shower arm requires a 1/2"
male threaded nipple, extending 5/8"
outside the finished surface of the ceiling.

The 27410XX1 shower arm requires 1/2"
male threaded nipple, extending 5/8" outside
the surface of the finished wall. The wall

must be reinforced at the mounting
point.

Hansgrohe recommends that the Raindance Air
Royale showerhead be installed with the
Ecostat thermostatic mixing valve.

Do not install this showerhead with a pressure
balancing valve.

A 12 mm allen wrench (not included) is useful
for installing the ceiling mount arm. 12 mm
allen wrenches are available at hardware and
auto parts stores.

Two-feature installation with Ecostat thermostatic
mixer and Trio diverter.

area for required wall reinforcement

Three-function shower with Ecostat thermostatic
mixer, 3/4" volume control, and Quattro diverter.

2

From • the function is guaranteed.

27418XX1 Installation Instructions:

• Install a 1/2" male threaded nipple, extending 5/8"
outside the surface of the finished ceiling.

• Using the mounting plate as a template, mark the positions
for four screw holes. Put the mounting plate away in a safe
place.

• Drill the holes with a 6mm bit suitable for the ceiling
surface.

• Install the anchors. Seal around the nipple and the elbows
with a waterproof bathroom sealant suitable for the ceiling
surface.

• Install the mounting plate.

12 mm

3