Faber MAGN24SS Specsheet

Magnum

a professional performer

under cabinet rangehood

°

professional styling

°

600 cfm PRO motor

°

2 halogen lights for 24”

°

3 halogen lights for 30” and 36”

°

3 speed control

°

integrated control panel

°

stainless steel baffle filters

°

convertible to recirculating*

°

New Ductless Kit Available

°

easy mounting system

°

sone range: 3.5 - 6.5

°

6” round duct

°

* it is highly recommended that
professional style cooking always
be vented to the outside.

Professional Collection

The Magnum is an excellent
replacement hood for your updated
pro cooking. Installs easily to the
bottom of your cabinet. Now
recirculating filtered air back into
your kitchen has never been easier

Size | Color Model #

24 Stainless
30 Stainless
36 Stainless

Ductless Vent Grate Kit

a

A 4” high stainless steel vent grate which

c

is installed below the cabinet to recirculate
the air back into the kitchen when

c

ducting outside is impossible or

e

impractical. Includes the stainless grate,

installation hardware and

s

charcoal filters

MAGN24SS
MAGN30SS
MAGN36SS

s
o
r
i
e

Replacement Charcoal Filters

Size / Model #

24” / DUCTGRT24
30” / DUCTGRT30
36” / DUCTGRT36

with a new ductless vent grate kit

Model #

FILTER1

For recirculating installations, high
quality, heavy duty filters ensure
the removal of smoke and odors
from the kitchen.

CFM Reducer Kit

For use in make up air environments where
an under 300 cfm hood is required. This
kit reduces the ducting to 5” round and
reduces the cfm to under 300

CFMRED

s

p.o. box 435 • Wayland, MA 01778 • tel: [phone] • fax: [phone] • e-mail: [e-mail] • www.faberonline.com

Dimensional Diagrams & Electrical Knockouts

24” minimum

30” suggested maximum

bottom of hood to cooking surface

18” minimum

clearance upper

cabinet to

countertop

36”

70 5/16” minimum

76

5/16” maximum

to bottom of cabinet frame

24” or 30” or 36”

cabinet opening width

Pre-Planning Your Installation -

installation instructions before you begin installing this rangehood.

Important: Consult the

Pre-Planning Your Ductwork -

Important: Consult the installation instructions
before you begin installing this rangehood.

Make your ductrun as straight and short as
possible. The ductrun should not exceed 35
equivalent feet if ducted with the required
minimum of 6” round ductwork. Count 45º
angles as 3 feet, 90º elbows as 5 feet, and 90º
flat elbows as 12 feet.

For best results, use no more than three 90°
elbows. Make sure that there is a minimum
of 24” of straight duct between elbows if
more than one is used. Do not install two
elbows together. If you must elbow right
away, do it as far away from the hood’s ex­haust opening as possible.

Recirculating Installations

IT IS HIGHLY RECOMMENDED THAT
PROFESSIONAL STYLE COOKING BE
VENTED TO THE OUTSIDE. For installations

where ductwork to the outside of your home
is impossible or highly impractical Charcoal
Filters, which attach to the blower assembly,
absorb smoke and odors. THE DUCTLESS

VENT GRATE KIT INCLUDES CHARCOAL
FILTERS AND A 4” HIGH STAINLESS STEEL
VENT GRATE TO BRING AIR BACK INTO THE
KITCHEN.

WARNING! Product specications are subject to change without notication. Consult the installation instructions
before you begin installing this rangehood.

Rev.07/11