Faber 630001088, 630001648, Diamante DIAM30SS, Diamante DIAM36SS, Diamante DIAM48SS Specifications

Diamante

a brilliantly cut gem

wall canopy rangehood

°

sleek styling

°

600 cfm PRO motor

°

Silent Kit noise reduction

°

halogen lights with dimmer

°

4 Speed LED display control

°

30 minute auto off timer

°

stainless steel baffle filters

°

modified pro depth

°

convertible to ductless*

°

Easy Cube mounting system

°

sone range: 3.5 - 6.5

°

6” round duct

°

Uses 25% less energy than previous model

°

Designer Collection

* it is highly recommended that
professional style cooking always
be vented to the outside.

Size | Color Model #

30 Stainless
36 Stainless
48 Stainless

a

High Ceiling Chimney Kit

c

One 40” upper chimney to replace 16 1/8”
upper chimney that came with hood

c

Stainless HIGHDIAM

e

Ductless Conversion Kit

s

Includes: • Lower Chimney with holes for duct-

s

ing • Ductless Diverter Assembly • Vent Grates

• Charcoal Filter

o

Stainless

r

DIAM30SS
DIAM36SS
DIAM48SS

DUCTDIAM

A streamlined shape combined with traditional styling
makes the Diamante an updated alternative in canopy

ventilation. To add subtle sparkle, the corners of the

canopy and the chimney are angled in a

diamond-like cut.

NOW WITH A NEW LED DISPLAY WITH

ELECTRONIC TOUCH CONTROLS, 2 LEVEL

LIGHTING, 30 MINUTE AUTO SHUT OFF, AND 10

MINUTE INTENSIVE SPEED CONTROL

i

Replacement Charcoal Filter

e
s

p.o. box 435 • Wayland, MA 01778 • tel: [phone] • fax: [phone] • e-mail: [e-mail] • www.faberonline.com

FILTER2

upper

chimney

cover

ductless lower

chimney

cover

canopy

x = distance from hoo d to cooktop

(varies depending on installation)
min - 24”, suggested max - 30”

cabinet base

10" min

16

1/8”

max

22"

3

3/8”

36”

22"

x

also consult co oktop

manufacturer's recommendation

min & max ceiling height examples

x = 30"

min

8'

5 3/8"

max

8'

11 1/2"

x = 28"

min

8'

3 3/8"

max

8'

9 1/2"

x = 26"

min

8'

1 3/8"

max

8'

7 1/2"

x = 24"

min

7'

11 3/8"

max

8'

5 1/2"

Dimensional Diagrams

upper

chimney

cover

lower

chimney

cover

canopy

x = distance from hoo d to cooktop

(varies depending on installation)
min - 24”, suggested max - 30”

cabinet base

5

1/8” min

16

1/8” max

21

1/4”

3 3/8”

36”

22"

x

also consult co oktop

manufacturer's recommendation

min & max ceiling height examples

x = 30"

min

7'

11 3/4"

max

8'

10 3/4"

x = 28"

min

7'

9 3/4"

max

8'

8 3/4"

x = 26"

min

7'

7 3/4"

max

8'

6 3/4"

x = 24"

min

7'

5 3/4"

max

8'

4 3/4"

Ducted

Ductless

Pre-Planning Your Installation - Important: Consult the installation instructions before you begin installing this rangehood.

Ducted

For ducted installations, the

chimneys can be adjusted for

ceilings between 7’ 5 3/4”
and 8’ 10 3/4” depending

on the distance between
the bottom of the hood and
the cooktop (distance x in
Ducted diagram).

For ductless installations, the

chimneys can be adjusted for

ceilings between 7’ 11 3/8”
and 8’ 11 1/2” depending

on the distance between
the bottom of the hood and
the cooktop (distance x in
Ductless diagram).

For shorter ceilings, have
the chimney cover(s) cut at
a sheet metal shop. For

higher ceiling installations,

Pre-Planning Your Installation - Important: Consult the installation

instructions before you begin installing this rangehood.

Make your ductrun as straight and short as possible. The ductrun should not exceed
35 equivalent feet if ducted with the required minimum of 6” round duct. Count 45º
angles as 3 feet, 90º elbows as 5 feet, and 90º flat elbows as 12 feet.

For best results, use no more than three 90° elbows. Make sure that there is a
minimum of 24” of straight duct between elbows if more than one is used. Do
not install two elbows together. If you must elbow right away, do it as far away
from the hood’s exhaust opening as possible.

WARNING! Product specifications are subject to change without notification. Consult the installation instructions before you begin installing this rangehood.

the High Ceiling Chimney
Kit includes a new 40”

upper chimney which would
replace the 16 1/8” upper
chimney that came with
the hood.

Ductless Installations*

For installations where ductwork is impos­sible or highly impractical, a Ductless
Conversion Kit is available. A charcoal
filter, which attaches under the blower
assembly, absorbs smoke and odors. A
ductless diverter assembly directs the air
out to a lower chimney with vent grates cut
into the sides.

* it is highly recommended that
professional style cooking always be
vented to the outside.

Ductless

Rev. 07/11